UNISONIC TECHNOLOGIES CO., LTD 7N60-CB Preliminary Power MOSFET 7.0A, 600V N-CHANNEL POWER MOSFET DESCRIPTION The UTC 7N60-CB is a high voltage power MOSFET and is designed to have better characteristics, such as fast switching time, low gate charge, low on-state resistance and have a high rugged avalanche characteristics. This power MOSFET is usually used at high speed switching applications in switching power supplies and adaptors. FEATURES * RDS(ON) < 1.0Ω @ VGS = 10V, ID = 3.5A * Fast switching capability * Avalanche energy tested * Improved dv/dt capability, high ruggedness SYMBOL ORDERING INFORMATION Note: Ordering Number Lead Free Halogen Free 7N60L-TA3-T 7N60G-TA3-T 7N60L-TF1-T 7N60G-TF1-T 7N60L-TF2-T 7N60G-TF2-T 7N60L-TF3-T 7N60G-TF3-T 7N60L-TM3-T 7N60G-TM3-T 7N60L-TN3-R 7N60G-TN3-R Pin Assignment: G: Gate D: Drain S: Source www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd Package TO-220 TO-220F1 TO-220F2 TO-220F TO-251 TO-252 Pin Assignment 1 2 3 G D S G D S G D S G D S G D S G D S Packing Tube Tube Tube Tube Tube Tape Reel 1 of 7 QW-R205-113.b 7N60-CB Preliminary Power MOSFET MARKING UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 7 QW-R205-113.b 7N60-CB Preliminary Power MOSFET ABSOLUTE MAXIMUM RATINGS (TC=25°C, unless otherwise specified) PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Pulsed (Note 2) Drain Current SYMBOL VDSS VGSS ID IDM IAR EAS dv/dt RATINGS 600 ±30 7.0 28 4.5 100 3.0 142 UNIT V V A A A mJ V/ns W SYMBOL RATING UNIT 62.5 °C/W 110 0.88 °C/W °C/W 2.6 °C/W 2.12 °C/W Avalanche Current (Note 3) Avalanche Energy Single Pulsed (Note 3) Peak Diode Recovery dv/dt (Note 4) TO-220 TO-220F/TO-220F1 Power Dissipation PD 48 W TO-220F2 TO-251/TO-252 59 W Junction Temperature TJ +150 °C Storage Temperature TSTG -55 ~ +150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Repetitive Rating : Pulse width limited by TJ 3. L = 10mH, IAS = 4.5A, VDD = 50V, RG = 25 Ω, Starting TJ = 25°C 4. ISD ≤ 7.0A, di/dt ≤200A/μs, VDD ≤ BVDSS, Starting TJ = 25°C THERMAL DATA Junction to Ambient Junction to Case PARAMETER TO-220/TO-220F TO-220F1/TO-220F2 TO-251/TO-252 TO-220 TO-220F TO-220F1/TO-220F2 TO-251/TO-252 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw θJA θJC 3 of 7 QW-R205-113.b 7N60-CB Preliminary Power MOSFET ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS OFF CHARACTERISTICS Drain-Source Breakdown Voltage BVDSS VGS=0V, ID=250μA Drain-Source Leakage Current IDSS VDS=600V, VGS=0V Forward VG=30V, VDS=0V Gate- Source Leakage Current IGSS Reverse VGS=-30V, VDS=0V ON CHARACTERISTICS Gate Threshold Voltage VGS(TH) VDS=VGS, ID=250μA Static Drain-Source On-State Resistance RDS(ON) VGS=10V, ID=3.5A DYNAMIC CHARACTERISTICS Input Capacitance CISS VGS=0V, VDS=25V, f=1.0 MHz Output Capacitance COSS Reverse Transfer Capacitance CRSS SWITCHING CHARACTERISTICS Total Gate Charge (Note 1) QG VDS=50V, VGS=10V, ID=1.3A Gate to Source Charge QGS IG=100μA (Note 1, 2) Gate to Drain Charge QGD Turn-ON Delay Time (Note 1) tD(ON) VDD=30V, VGS=10V, ID=0.5A, Rise Time tR RG=25Ω (Note 1, 2) Turn-OFF Delay Time tD(OFF) Fall-Time tF SOURCE- DRAIN DIODE RATINGS AND CHARACTERISTICS Maximum Body-Diode Continuous Current IS Maximum Body-Diode Pulsed Current ISM Drain-Source Diode Forward Voltage (Note 1) VSD IS=7.0A, VGS=0V Body Diode Reverse Recovery Time (Note 1) trr IS=7.0A, VGS=0V, dIF/dt=200A/µs Body Diode Reverse Recovery Charge Qrr Notes: 1. Pulse Test: Pulse width ≤ 300μs, Duty cycle ≤ 2%. 2. Essentially independent of operating temperature. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 600 2.0 1 100 -100 V μA nA nA 4.0 1.0 V Ω 351 112 5 pF pF pF 121 11 10 72 42 210 39 nC nC nC ns ns ns ns 7 28 1.4 460 3.0 A A V ns μC 4 of 7 QW-R205-113.b 7N60-CB Preliminary Power MOSFET TEST CIRCUITS AND WAVEFORMS D.U.T. + VDS - + - L RG Driver VGS VDD * dv/dt controlled by RG * ISD controlled by pulse period * D.U.T.-Device Under Test Same Type as D.U.T. Peak Diode Recovery dv/dt Test Circuit VGS (Driver) Period D= P.W. P. W. Period VGS= 10V IFM, Body Diode Forward Current ISD (D.U.T.) di/dt IRM Body Diode Reverse Current Body Diode Recovery dv/dt VDS (D.U.T.) VDD Body Diode Forward Voltage Drop Peak Diode Recovery dv/dt Waveforms UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 7 QW-R205-113.b 7N60-CB Preliminary Power MOSFET TEST CIRCUITS AND WAVEFORMS (Cont.) VDS 90% VGS 10% tD(ON) tD(OFF) tF tR Switching Test Circuit Switching Waveforms VGS QG 10V QGS QGD Charge Gate Charge Test Circuit Gate Charge Waveform BVDSS IAS ID(t) VDS(t) VDD tp Unclamped Inductive Switching Test Circuit UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Time Unclamped Inductive Switching Waveforms 6 of 7 QW-R205-113.b 7N60-CB Preliminary Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 7 QW-R205-113.b