Voltage Crystal Oscillators Quartz Controlled Crystal Units 5.0x3.2 mm Specifications Actual size 3.2±0.2 #3 #2 1.05±0.1 #1 1.2 #1 1.2 #2 Operating Conditions 0.8 2.6 1.6 Absolute Max. Ratings #3 PIN 1 2 3 4 CONNECTION Vcontrol GND OUTPUT VDD 1.3 1.6 1.0 2.6 0.01μF ～ 0.1μF 1.0 Supply voltage Vcontrol voltage Storage temperature Input current (no load) SOLDERING PATTERN 3.9 OUTPUT WAVEFORM Symmetry Rise and fall times (20% VDD to 80% VDD level) Output (-40゜ C to +85゜ C) "0" Level "1" Level Load Start-up time Frequency linearity Frequency slope Modulation bandwidth (-3 dB) SSB phase noise Vcon input impedance (Vcon-GND) Aging Reflow condition n.a. ±110 ppm min. n.a. ±110 ppm min. n.a. ±110 ppm min. ±90 ppm min. ±2 ppm max. (VDD ±5%) C to +70゜ C (Standard) -20゜ C to +85゜ C (W = Option) -40゜ +1.8V, +2.5V, +2.8V, +3.3V DC ±10% +3.3V DC ±10% 1/2 VDD ± 1/2 VDD DC -0.3V to +5.0V DC -0.3V to VDD +0.5V DC C to +100゜ C -40゜ 2 mA max. (VDD = +1.8V) n.a. n.a. 3 mA max. (VDD = +2.5V & +2.8V) 5 mA max. (VDD = +3.3V) 20 mA max. (VDD = +3.3V) 45% to 55% at 1/2 VDD level n.a. 6 ns max. (VDD = +1.8V) 4 ns max. (VDD = +2.5V, +2.8V & +3.3V) 4 ns max. (VDD = +3.3V) VOL : 20% VDD max. VOH : 80% VDD min. 15 pF max. (CMOS) 10 ms max. 10 % max. Positive 20 kHz min. -131 dBc / Hz, Typical at 1 kHz offset (at 40.000 MHz & VDD = +3.3V) -130 dBc / Hz, Typical at 1 kHz offset (at 122.880 MHz & VDD = +3.3V) 10 MΩ min. ±5 ppm max. at +25゜ C ±3゜ C for first year +250゜ C ±10゜ C for 10 seconds +170゜ C ±10゜ C for 1 to 2 minutes (preheating) ( * 1 ) F inal par t num ber to be as s i gned w i th pac k age ty pe, i nput v ol tage, fr equenc y s tabi l i ty, oper ati ng tem per atur e a nd f requency. e. g. 99S M O V D ( 3. 3VD ) 27.000 MH z PACKAGE DATA ∅ 1.5 + 0 -0 .1 Metal 1.75±0.1 L 2.0±0.1 Ceramic Sealing Seam Terminal Tungsten (metalized) Terminal plating RoHS Gold / Nickel (surface) / (under) MCF Base 4.0±0.1 99SMOVD D Lid TAPE SPECIFICATIONS C Item Package M B J TEST CIRCUIT A 1.3 Supply voltage (VDD) Control voltage (Vcon = Pin#1) 0.8 #4 Operating temperature ±110 ppm min. VCXO 5.0±0.2 #4 VDD = +1.8V Vcon = +0.9V ±0.9V VDD = +2.5V Frequency pulling Vcon = +1.25V ±1.25V range VDD = +2.8V Vcon = +1.4V ±1.4V VDD = +3.3V Vcon = +1.65V ±1.65V Frequency change vs. input voltage CLK OSC 99SMOVD*1 1.000 MHz to 55.000 MHz 55.000 MHz to 170.000 MHz 99SMOVD(B) : ±50 ppm over -20゜ C to +70゜ C 99SMOVD(C) : ±30 ppm over -20゜ C to +70゜ C 99SMOVD(D) : ±25 ppm over -20゜ C to +70゜ C 99SMOVD(E) : ±20 ppm over -20゜ C to +70゜ C C to +85゜ C 99SMOVD(BW) : ±50 ppm over -40゜ 99SMOVD(CW) : ±30 ppm over -40゜ C to +85゜ C 99SMOVD(DW) : ±25 ppm over -40゜ C to +85゜ C Vcon = 1/2 VDD Frequency stability (over all conditions) 99SMOVD ● CMOS OUTPUT ● WIDE FREQUENCY RANGE ● PACKAGE SIZE 5.0x3.2 mm XTAL Item General part number Frequency range 0.052 gm (wt.) CMOS STANDARD SMD VCXO STANDARD SPECIFICATIONS 99SMOVD 5.0x3.2 mm TCXO (+1.8V, +2.5V, +2.8V or +3.3V FIXED MODELS) 1 to 170 MHz WIDE FREQ. RANGE OCXO 99SMOVD VCXO F A B C D F J L M Reel Dia. Qty/Reel 5.4 3.5 12.0 5.5 8.0 1.5 0.3 1.4 180 1000pcs Compliant (Pb-free) 101