Data Sheet

PBSS8110X
100 V, 1 A NPN low VCEsat (BISS) transistor
Rev. 02 — 11 December 2009
Product data sheet
1. Product profile
1.1 General description
NPN low VCEsat Breakthrough In Small Signal (BISS) transistor in a SOT89 (SC-62/
TO-243) SMD plastic package.
PNP complement: PBSS9110X.
1.2 Features
„
„
„
„
SOT89 package
Low collector-emitter saturation voltage VCEsat
High collector current capability: IC and ICM
High efficiency leading to less heat generation
1.3 Applications
„ Major application segments:
‹ Automotive 42 V power
‹ Telecom infrastructure
‹ Industrial
„ Peripheral driver:
‹ Driver in low supply voltage applications (e.g. lamps and LEDs)
‹ Inductive load driver (e.g. relays, buzzers and motors)
„ DC-to-DC converter
1.4 Quick reference data
Table 1.
Quick reference data
Symbol Parameter
Conditions
Min
Typ
Max
Unit
open base
-
-
100
V
-
-
1
A
-
-
3
A
-
165
200
mΩ
VCEO
collector-emitter voltage
IC
collector current (DC)
ICM
peak collector current
single pulse;
tp ≤ 1 ms
RCEsat
collector-emitter
saturation resistance
IC = 1 A;
IB = 100 mA
[1]
Pulse test: tp ≤ 300 μs; δ ≤ 0.02.
[1]
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
1
emitter
2
collector
3
base
Simplified outline
Symbol
2
3
3
2
1
1
sym042
3. Ordering information
Table 3.
Ordering information
Type number
PBSS8110X
Package
Name
Description
Version
SC-62
plastic surface mounted package; collector pad for
good heat transfer; 3 leads
SOT89
4. Marking
Table 4.
Marking codes
Type number
Marking code[1]
PBSS8110X
*4B
[1]
* = -: made in Hong Kong
* = p: made in Hong Kong
* = t: made in Malaysia
* = W: made in China
PBSS8110X_2
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
2 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
VCBO
collector-base voltage
open emitter
-
120
V
VCEO
collector-emitter voltage
open base
-
100
V
VEBO
emitter-base voltage
open collector
-
5
V
IC
collector current (DC)
-
1
A
ICM
peak collector current
-
3
A
IB
base current (DC)
single pulse;
tp ≤ 1 ms
Tamb ≤ 25 °C
total power dissipation
Ptot
-
300
mA
[1]
-
0.55
W
[2]
-
1.4
W
[3]
-
2.0
W
Tj
junction temperature
-
150
°C
Tamb
ambient temperature
−65
+150
°C
Tstg
storage temperature
−65
+150
°C
[1]
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2]
Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 6cm2.
[3]
Device mounted on a ceramic PCB, Al2O3, standard footprint.
006aaa408
2.0
(1)
Ptot
(W)
1.6
(2)
1.2
0.8
(3)
0.4
0
0
40
80
120
160
Tamb (°C)
(1) Ceramic PCB, Al2O3, standard footprint
(2) FR4 PCB; mounting pad for collector 6cm2
(3) FR4 PCB; standard footprint
Fig 1.
Power derating curves
PBSS8110X_2
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
3 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
6. Thermal characteristics
Table 6.
Thermal characteristics
Symbol
Parameter
Conditions
thermal resistance from
junction to ambient
Rth(j-a)
in free air
thermal resistance from
junction to solder point
Rth(j-sp)
Min
Typ
Max
Unit
[1]
-
-
227
K/W
[2]
-
-
89
K/W
[3]
-
-
63
K/W
-
-
16
K/W
[1]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2]
Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 6cm2.
[3]
Device mounted on a ceramic PCB, Al2O3, standard footprint.
006aaa409
103
duty cycle =
1
0.75
2
10
0.5
0.33
0.2
Zth(j-a)
(K/W)
10
0.1
0.05
0.02
0.01
1
0
10−1
10−5
10−4
10−3
10−2
10−1
1
10
102
103
t p (s)
FR4 PCB; standard footprint
Fig 2.
Transient thermal impedance from junction to ambient as a function of pulse time; typical values
PBSS8110X_2
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
4 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
006aaa411
103
Zth(j-a)
(K/W)
102
10
duty cycle =
1
0.75
0.5
0.33
0.2
0.1
0.05
0.02
1
0.01
0
10−1
10−5
10−4
10−3
10−2
10−1
1
10
102
103
t p (s)
FR4 PCB; mounting pad for collector 6cm2
Fig 3.
Transient thermal impedance from junction to ambient as a function of pulse time; typical values
102
Zth(j-a)
(K/W)
006aaa410
duty cycle =
1
0.75
0.5
0.33
0.2
10
0.1
0.05
0.02
1
0.01
0
10−1
10−5
10−4
10−3
10−2
10−1
1
10
102
103
t p (s)
Ceramic PCB, Al2O3, standard footprint
Fig 4.
Transient thermal impedance from junction to ambient as a function of pulse time; typical values
PBSS8110X_2
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
5 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
7. Characteristics
Table 7.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
ICBO
collector-base cut-off
current
VCB = 80 V; IE = 0 A
-
-
100
nA
VCB = 80 V; IE = 0 A;
Tj = 150 °C
-
-
50
μA
ICES
collector-emitter
cut-off current
VCE = 80 V; VBE = 0 V
-
-
100
nA
IEBO
emitter-base cut-off
current
VEB = 4 V; IC = 0 A
-
-
100
nA
hFE
DC current gain
VCE = 10 V; IC = 1 mA
150
-
-
VCE = 10 V; IC = 250 mA
VCEsat
collector-emitter
saturation voltage
150
-
500
VCE = 10 V; IC = 500 mA
[1]
100
-
-
VCE = 10 V; IC = 1 A
[1]
80
-
-
-
-
40
mV
IC = 100 mA; IB = 10 mA
IC = 500 mA; IB = 50 mA
-
-
120
mV
IC = 1 A; IB = 100 mA
[1]
-
-
200
mV
[1]
-
165
200
mΩ
RCEsat
collector-emitter
saturation resistance
IC = 1 A; IB = 100 mA
VBEsat
base-emitter
saturation voltage
IC = 1 A; IB = 100 mA
-
-
1.05
V
VBEon
base-emitter turn-on
voltage
VCE = 10 V; IC = 1 A
-
-
0.9
V
VCC = 10 V; IC = 0.5 A;
IBon = 0.025 A; IBoff = −0.025 A
-
25
-
ns
-
220
-
ns
td
delay time
tr
rise time
ton
turn-on time
-
245
-
ns
ts
storage time
-
365
-
ns
tf
fall time
-
185
-
ns
toff
turn-off time
-
550
-
ns
fT
transition frequency
VCE = 10 V; IC = 50 mA;
f = 100 MHz
100
-
-
MHz
Cc
collector capacitance
VCB = 10 V; IE = ie = 0 A;
f = 1 MHz
-
-
7.5
pF
[1]
Pulse test: tp ≤ 300 μs; δ ≤ 0.02.
PBSS8110X_2
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
6 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
001aaa497
600
001aaa495
1000
VBE
(mV)
hFE
(1)
800
(1)
400
(2)
(2)
600
(3)
200
(3)
400
0
10−1
1
102
10
103
104
IC (mA)
200
10−1
VCE = 10 V
1
102
103
104
IC (mA)
VCE = 10 V
(1) Tamb = 100 °C
(1) Tamb = −55 °C
(2) Tamb = 25 °C
(2) Tamb = 25 °C
(3) Tamb = −55 °C
Fig 5.
10
(3) Tamb = 100 °C
DC current gain as a function of collector
current; typical values
001aaa504
1
Fig 6.
Base-emitter voltage as a function of collector
current; typical values
001aaa505
103
VCEsat
(V)
VCEsat
(mV)
10−1
102
(1)
(2)
(3)
10−2
10−1
1
10
102
10
10−1
103
104
IC (mA)
1
10
102
103
104
IC (mA)
IC/IB = 20; Tamb = 25 °C
IC/IB = 10
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −55 °C
Fig 7.
Collector-emitter saturation voltage as a
function of collector current; typical values
Fig 8.
Collector-emitter saturation voltage as a
function of collector current; typical values
PBSS8110X_2
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
7 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
001aaa506
104
001aaa498
1200
VBEsat
(mV)
VCEsat
(mV)
1000
(1)
103
800
(2)
(3)
600
102
400
10
10−1
1
10
102
103
104
IC (mA)
200
10−1
IC/IB = 50; Tamb = 25 °C
1
10
102
103
104
IC (mA)
IC/IB = 10
(1) Tamb = −55 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
Fig 9.
Collector-emitter saturation voltage as a
function of collector current; typical values
001aaa499
1200
Fig 10. Base-emitter saturation voltage as a function
of collector current; typical values
VBEsat
(mV)
RCEsat
(Ω)
1000
102
800
10
600
1
400
10−1
1
10
102
103
104
IC (mA)
IC/IB = 20; Tamb = 25 °C
001aaa501
103
10−1
10−1
(1)
(2)
(3)
1
10
102
103
104
IC (mA)
IC/IB = 10
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −55 °C
Fig 11. Base-emitter saturation voltage as a function
of collector current; typical values
Fig 12. Collector-emitter saturation resistance as a
function of collector current; typical values
PBSS8110X_2
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
8 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
001aaa502
103
RCEsat
(Ω)
RCEsat
(Ω)
102
102
10
10
1
1
10−1
10−1
1
10
102
001aaa503
103
10−1
10−1
103
104
IC (mA)
IC/IB = 20; Tamb = 25 °C
1
10
102
103
104
IC (mA)
IC/IB = 50; Tamb = 25 °C
Fig 13. Collector-emitter saturation resistance as a
function of collector current; typical values
Fig 14. Collector-emitter saturation resistance as a
function of collector current; typical values
001aaa496
2
IB (mA) = 35
31.5
28
24.5
21
17.5
14
IC
(A)
1.6
1.2
10.5
7
0.8
3.5
0.4
0
0
1
2
3
4
5
VCE (V)
Tamb = 25 °C
Fig 15. Collector current as a function of collector-emitter voltage; typical values
PBSS8110X_2
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
9 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
8. Test information
IB
input pulse
(idealized waveform)
90 %
IBon (100 %)
10 %
IBoff
output pulse
(idealized waveform)
IC
90 %
IC (100 %)
10 %
t
td
ts
tr
ton
tf
toff
006aaa003
Fig 16. BISS transistor switching time definition
VBB
RB
VCC
RC
Vo
(probe)
oscilloscope
450 Ω
(probe)
450 Ω
oscilloscope
R2
VI
DUT
R1
mlb826
VCC = 10 V; IC = 0.5 A; IBon = 0.025 A; IBoff = −0.025 A
Fig 17. Test circuit for switching times
PBSS8110X_2
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
10 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
9. Package outline
4.6
4.4
1.8
1.4
1.6
1.4
2.6
2.4
4.25
3.75
1
2
1.2
0.8
3
0.53
0.40
1.5
0.48
0.35
0.44
0.23
3
Dimensions in mm
06-08-29
Fig 18. Package outline SOT89 (SC-62/TO-243)
10. Packing information
Table 8.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number
PBSS8110X
[1]
Package
SOT89
Description
8 mm pitch, 12 mm tape and reel
1000
4000
-115
-135
For further information and the availability of packing methods, see Section 15.
PBSS8110X_2
Product data sheet
Packing quantity
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
11 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
11. Soldering
4.75
2.25
2.00
1.90
1.20
solder lands
0.85 0.20
solder resist
occupied area
1.70
1.20
solder paste
4.60
4.85
Dimensions in mm
0.50
1.20
1.20
1.00
(3x)
3
2
1
msa442
0.60 (3x)
0.70 (3x)
3.70
3.95
Reflow soldering is the only recommended soldering method
Fig 19. Reflow soldering footprint SOT89 (SC-62/TO-243)
12. Mounting
32 mm
30 mm
32 mm
40
mm
2.5 mm
20
mm
40
mm
1 mm
3 mm
2.5 mm
2.5 mm
1 mm
1 mm
0.5 mm
0.5 mm
5 mm
5 mm
3.96 mm
3.96 mm
1.6 mm
001aaa234
Fig 20. FR4 PCB, standard footprint
PBSS8110X_2
Product data sheet
1.6 mm
001aaa235
Fig 21. FR4 PCB, mounting pad for
collector 6cm2
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
12 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
13. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
PBSS8110X_2
20091211
Product data sheet
-
PBSS8110X_1
Modifications:
PBSS8110X_1
•
This data sheet was changed to reflect the new company name NXP Semiconductors,
including new legal definitions and disclaimers. No changes were made to the technical
content.
•
•
•
•
•
Figure 5: updated
Figure 7: VCEsat axis unit amended from mV to V
Figure 15: updated
Figure 18 “Package outline SOT89 (SC-62/TO-243)”: updated
Figure 19 “Reflow soldering footprint SOT89 (SC-62/TO-243)”: updated
20050511
Product data sheet
-
PBSS8110X_2
Product data sheet
-
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
13 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
14. Legal information
14.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
14.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
14.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
14.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
15. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
PBSS8110X_2
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 02 — 11 December 2009
14 of 15
PBSS8110X
NXP Semiconductors
100 V, 1 A NPN low VCEsat (BISS) transistor
16. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
10
11
12
13
14
14.1
14.2
14.3
14.4
15
16
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics . . . . . . . . . . . . . . . . . . 4
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test information . . . . . . . . . . . . . . . . . . . . . . . . 10
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11
Packing information . . . . . . . . . . . . . . . . . . . . 11
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 13
Legal information. . . . . . . . . . . . . . . . . . . . . . . 14
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 14
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Contact information. . . . . . . . . . . . . . . . . . . . . 14
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2009.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 11 December 2009
Document identifier: PBSS8110X_2