FEATURES APPLICATIONS Small size – Safety Agency approved – Metalized Polypropylene EMI filters – Across the line Operating Temperature Range Capacitance Tolerance AC voltage (50/60 Hz) -40°C to +110°C +10% at 1 kHz, 20°C UL/CSA VDE CQC 250/275/310 250/275/310 310 Tan δ Dissipation Factor at 1 kHz and 20°C .1% Max Capacitance Insulation Resistance @20°C (<70% RH)for 1 minute at 100VDC applied Self Inductance Dielectric Strength Life Expectancy Humidity test Impulse voltage (24 pulses) Capacitance temperature coefficient Construction Electrodes Coating Lead terminations Terminal to Terminal Terminal to Case >30000 MΩ at 100VDC <0.33uF 15000 MΩ >5000 MΩ at 500VDC >30000 MΩ at 100VDC >0.33uF 5000 MΩxuF >5000 MΩ at 500VDC <1 nano-Henry per mm of lead spacing and lead length C<.0068uF, 1500 VAC or 2121 VDC applied for 60 seconds C>.0068uF, 1768VDC or 1000 VAC applied for 60 seconds Terminal to Terminal Cut-off current: 2A ac or 10mAdc Current limiting resistance: 1Ω/V 2050VAC (50/60 Hz) applied between the terminals and case for 60 Terminal to case seconds and 20°C 1000 hours at 110°C at 125% of rated voltage with once every hour the voltage is increased to 1000 VAC for 0.1 seconds Capacitance change <10% of initially measured value Dissipation Factor <1.0% at 1kHz >100% of initially specified value (T-T) Insulation Resistance >3000 MΩ (Terminal to case) 500 Hours at 90 to 95% RH, 40C and no voltage applied after which the following voltage will be applied for 1 minute to each capacitor. C<0.0068uF 1500VAC, C>0.0068uF 1000VAC Capacitance change <10% of initially measured value Dissipation Factor <1.0% at 1kHz >50% of initially specified value (T-T) Insulation Resistance >15000 MΩ (Terminal to Case) C< 1uF Vp=2.5kVDC C> 1uF Vp=2.5kV √C -200ppm/°C, +100ppm/°C Metallized Polypropylene film Vacuum deposited Metal layers Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0) tinned copper clad steel leads All dimensions in (mm) * 17mm lead length available upon request Safety agency X capacitors are used to suppress electrical noise by reducing the input impedance of the device incorporating the capacitor. X capacitors are connected across the supply line where failure of the capacitor will not result in personal exposure to electrical shock. X2 capacitors are to be used in applications where the peak voltage is <2500V. Standard Voltage Class Certificate number ANSI/UL 60384-14 250/275/310 FOWX2 E317135 CSA E60384-1 250/275/310 FOWX8 E317135 VDE/ENEC DIN EN 60384-14 (VDE 0565 (1-1), EN60384-14:2013-08, IEC60384-14 (ed 4) 250/275/310 X2 40040758 CQC GB/T14472-2014 (.0022 to 5.6uF) 310 X2 CQC14001115428 UL/CSA MKP Capacitance (µF) IC PART NUMBER dv/dt Dims LxHxT (mm) (v/µ sec.) 0.0047 472MKP275KC 500 0.0047 472MKP275K 400 0.0056 562MKP275KC 500 0.0056 562MKP275KD 0.0068 Class X2 S (MM) d (MM) Capacitance (µF) IC PART NUMBER dv/dt Dims LxHxT (mm) (v/µ sec.) 10x8x4 7.5 0.6 0.33 334MKP275KA 350 13x10x5 10 0.6 0.33 334MKP275K 180 10x8x4 7.5 0.6 0.33 334MKP275KE 400 13x9x4 10 0.6 0.39 682MKP275KC 500 10x8x4 7.5 0.6 0.0068 682MKP275K 400 13x9x4 10 0.0082 822MKP275KC 500 10x8x4 0.0082 822MKP275KD 400 0.01 103MKP275KE 0.01 S (MM) d (MM) 15x14x8.5 12.5 0.8 26x12x6 22.5 0.8 300 18x13x7 15 0.8 394MKP275KG 180 26x12x6 22.5 0.8 0.39 394MKP275KA 350 15x15x9 12.5 0.8 0.6 0.39 394MKP275KE 300 18x13.5x7.5 15 0.8 7.5 0.6 0.47 474MKP275KE 300 18x14x8 15 0.8 13x9x4 10 0.6 0.47 474MKP275KBG5 180 26x14x6 22.5 0.8 300 18x8x4 15 0.6 0.47 474MKP275KA 350 15x16x10 12.5 0.6 103MKP275KC 500 10x8x4 7.5 0.6 0.47 474MKP275K 120 31x13.5x6 27.5 0.8 0.01 103MKP275K 400 13x9x4 10 0.6 0.47 474MKP275KB 180 26x16.5x7.5 22.5 0.8 0.015 153MKP275K 400 13x9x4 10 0.6 0.47 474MKP275KG4 120 32x18x9 27.5 0.8 0.015 153MKP275KC 500 10x8x4 7.5 0.6 0.56 564MKP275KH 120 31x14x6.5 27.5 0.8 0.015 153MKP275KE 300 18x8x4 15 0.8 0.56 564MKP275KE 300 18x15x9 15 0.8 0.022 223MKP275KC 500 10x9x4 7.5 0.6 0.56 564MKP275KG 180 26x14x7 22.5 0.8 0.022 223MKP275KCG5 500 10x8x4 7.5 0.6 0.68 684MKP275KG 180 26x17x8 22.5 0.8 0.022 223MKP275KB 300 18x9x4 15 0.6 0.68 684MKP275K 120 31x15.5x6.5 27.5 0.8 0.022 223MKP275K 400 13x9x4 10 0.6 0.68 684MKP275KE 300 18x16x10 15 0.8 0.033 333MKP275K 400 13x9x4 10 0.6 0.82 824MKP275KE 300 18x17.5x10 15 0.8 0.033 333MKP275KC 500 10x9x5 7.5 0.6 0.82 824MKP275KG 180 26x16x8 22.5 0.8 0.033 333MKP275KCG4 500 10x10x5 7.5 0.6 0.82 824MKP275KH 120 31x16x7.5 27.5 0.8 0.033 333MKP275KE 300 18x9x4 15 0.8 1 105MKP275K 120 31x17x8 27.5 0.8 0.047 473MKP275KD 400 13x9x4 10 0.6 1 105MKP275KE 300 18x18.5x11 15 0.8 0.047 473MKP275KC 500 10x10x5 7.5 0.6 1 105MKP275KG 180 26x17x9 22.5 0.8 0.047 473MKP275K 300 18x9x4 15 0.6 1 105MKP275KGG4 180 26x19x10 22.5 0.8 0.056 563MKP275KC 500 10x11x5 7.5 0.6 1.2 125MKP275KH 120 31x17.5x9 27.5 0.8 0.056 563MKP275KE 300 18x9x4 15 0.6 1.2 125MKP275KG 180 26x19.5x9 22.5 0.8 0.056 563MKP275KD 400 13x9.5x4.5 10 0.6 1.5 155MKP275KG 180 26x21x10 22.5 0.8 0.068 683MKP275KD 400 13x10x5 10 0.6 1.5 155MKP275K 120 31x18.5x10 27.5 0.8 0.068 683MKP275KC 500 10x12x6 7.5 0.6 1.8 185MKP275KG 180 26x23x12.5 22.5 0.8 0.068 683MKP275K 300 18x10x4 15 0.6 1.8 185MKP275KH 120 31x20.5x12 27.5 0.8 0.082 823MKP275KC 500 10x12x6 7.5 0.6 2.2 225MKP275KGE 180 26x22x15 22.5 0.8 0.082 823MKP275KD 400 13x11x5 10 0.6 2.2 225MKP275KG 180 26x24x13.5 22.5 0.8 0.082 823MKP275KE 300 18x10x5 15 0.8 2.2 225MKP275KG5 120 31x22x13 27.5 0.8 0.1 104MKP275KG5 300 18x10.5x5 15 0.8 2.2 225MKP275K 120 31x26x18 27.5 0.8 0.1 104MKP275KC 500 10x13x7 7.5 0.6 3.3 335MKP275KHF 120 31x26x17.5 27.5 0.8 0.1 104MKP275KD 400 13x11x5 10 0.6 3.3 335MKP275KH 120 31x29x15.5 27.5 0.8 0.1 104MKP275K 300 18x11x5 15 0.8 3.3 335MKP275KJ 100 41.5x26x14.5 37.5 1 0.12 124MKP275KE 300 18x10x5 15 0.8 3.9 395MKP275KJ 100 41.5x27.5x16 37.5 1 0.12 124MKP275KD 400 13x12x6 10 0.6 3.9 395MKP275KH 120 31x28x19 27.5 0.8 0.15 154MKP275KD 400 13x12x7 10 0.6 4.7 475MKP275KH 120 31x30.5x20 27.5 0.8 0.15 154MKP275KA 350 15x11.5x6 12.5 0.8 4.7 475MKP275KHG 120 31x32.5x19 27.5 0.8 0.15 154MKP275K 180 26x14.5x6 22.5 0.8 4.7 475MKP275KJ 100 41.5x30x17 37.5 1 0.15 154MKP275KE 300 18x10.5x5 15 0.8 5.6 565MKP275KJ 100 41.5x31.5x18.5 37.5 1 0.22 224MKP275KB 300 18x11.5x6 15 0.8 5.6 565MKP275KH 120 31x34.5x21 27.5 0.8 0.22 224MKP275K 180 26x14.5x6 22.5 0.8 6.8 685MKP275KJ 100 41.5x35.5x22.5 37.5 1 0.22 224MKP275KA 350 15x12.5x7 12.5 0.8 8.2 825MKP275KJ 100 41.5x38x25 37.5 1 0.22 224MKP275KD 400 13x14x8 10 0.6 10 106MKP275KJ 100 41.5x41x27.5 37.5 1 0.22 224MKP275KBG4 300 18x13x7 15 0.8