Evaluation Boards Brochure

Evaluation boards for Automotive, Industrial
and Multimarket Applications 2010
[ www.infineon.com/evalkits ]
Contents
Automotive
05
Motor control
11
Industrial control & automation
15
Power management
19
Lighting & LED
22
Consumer
25
Communication
30
Microcontroller
38
Design-in made easy with
our evaluation boards
WITH OUR BROAD RANGE of products and solutions, we have the perfect fit for just
about any automotive, consumer, communication or industrial application. Because we
are determined to deliver best-in-class technical support for our customers, we complement our product offering with a wide selection of supporting hardware, software and
evaluation boards.
THESE EVALUATION BOARDS ARE an invaluable design tool. They showcase the most
cost-effective and innovative solution for your particular design challenge at a glance.
In addition, they simplify and speed up design-in thanks to pre-configured hardware.
Similar to bills of material, application-oriented overviews of possible product combinations further enhance the design process.
THIS BROCHURE GIVES YOU a complete overview of our evaluation board offering,
showing you how these boards benefit your design effort in a number of ways.
4
Automotive
Board Name
Products
Description
Microcontroller boards
Microcontroller
For microcontroller evaluation boards, please see “Microcontroller” category.
Wireless control kits
Transmitter, transceiver and receiver
For transmitter, transceiver and receiver evaluation boards, please see
“Communication” category.
BTS 3256D
Protected low-side power switch (10 mΩ at 25 °C). This board
Demoboard
enables easy startup and connectivity for the new power HITFET™ BTS3256D
BTS 3256D. Enables easy read out of digital status via LED, and
easy slew rate change via variable resistor on board.
HITFET™ protected
low-side power switch
Low-side switch
TLE 7231G
SPIDER (SPI Driver for
Enhanced Relay Control)
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7235SE and TLE 7238SL.
Demoboard
TLE7235/7238
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7236SE and TLE 7239SL.
Demoboard
TLE7236/7239
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7240SL, TLE 7243SL and TLE 7244SL.
Demoboard
TLE724XSL
For a quick start to lab evaluation, this demoboard drives loads
such as heating, glow plugs or lamps in 12 V DC applications. It
uses two devices from the BTS 500x0-1EGA product family, which
can be used in parallel and also to drive two independent loads.
The board can be used on a stand-alone basis, but also in combination with power easy kit for quick start of software evaluation.
Demoboard
BTS50050-1EGA
Demoboard
BTS50060-1EGA
Demoboard
BTS50070-1EGA
Demoboard
BTS50080-1EGA
Evaluation kit to demonstrate the functionality of the BTS 5241L,
BTS 5234G and BTS 5230GS. These are 2-channel, smart power
PROFET TM (high-side switches), except BTS 6143D which is a singlechannel device. The control board is equipped with a C868BA
microcontroller. It is built to be reverse polarity protected. The
power boards are directly connected to the control board.
Demoboard
PROFET™ V2.0
Multi-channel switch
BTS 500x0-1EGA
HIC-PROFET™
Demoboard
TLE7234/7237
Multi-channel switch
TLE 7240SL
TLE 7243SL
TLE 7244SL
SPIDER (SPI Driver for
Enhanced Relay Control)
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7234SE and TLE 7237SL.
Multi-channel switch
TLE 7236EM
TLE 7236SE
TLE 7239SL
SPIDER (SPI Driver for
Enhanced Relay Control)
Demoboard
TLE7231G
Multi-channel switch
TLE 7235EM
TLE 7235SE
TLE 7238SL
SPIDER (SPI Driver for
Enhanced Relay Control)
SPI Driver for Enhanced Relay Control (SPIDER). This board is
designed to interface with the universal body control module
system evaluation tool.
Multi-channel switch
TLE 7234EM
TLE 7234SE
TLE 7237SL
SPIDER (SPI Driver for
Enhanced Relay Control)
Order No.
High-side switch
BTS 5241L
BTS 5234G
BTS 5230GS
BTS 6143D
PROFET™ demo kit
This board is part of the PROFET™ demo kit.
PROFET™ demo kit
This board is part of the PROFET™ demo kit.
PROFET™ demo kit
High-side switch
5
Automotive
Board Name
Products
Description
BTS 5590GX
The universal body control module is intended to be used as a
Demoboard
system evaluation board for several automotive power devices.
BTS 5590GX
It consists of a control unit and a power unit. The control unit is
intended to control the power unit as well as to receive commands
from a user interface. The power unit contains two BTS 5590GX for
system evaluation purposes.
SPOC (SPI Power
controller for advanced
light control)
Order No.
This board is part of the SPOC (SPI power controller for advanced
light control) demo kit.
BTS 5590GX demoboard
Multi-channel switch
BTS 5662E
BTS 5672E
BTS 5682E
SPOC II - power easy kit
6
The kit contains two boards, a TLE 7826G evaluation board
together with a PCLIN programming and LIN interface card,
documentation, software and tools. This enables you from simply
playing with the device (without any software development) to
developing your own software application (2 kB limited Keil IDE).
Demoboard
TLE7826
Basic control unit to generate CAN-, LIN- and FlexRay datastreams. CAN-LIN Universal
Plug & play, ready to use system to build up complete CAN-, LIN-,
Demoboard
and FlexRay networks. Additional software examples are provided to allow timing measurements and to verify signal integrity.
A smart 12-channel low-side switch with LVDS-based micro
second channel and asynchronous upstream specifically
designed for powertrain applications. To be used together with
the microcontroller TriCore™ TC1766 demo board (to be ordered
seperately).
Demoboard
TLE8712EE
This evaluation kit is intended to provide first-hand experience of
the door module power IC TLE 8201R which contains all the
functions to drive power outputs within a door module, i.e. main
lock, safe lock, mirror adjustment, mirror fold, mirror heating
and lamps. It provides access to all inputs and outputs with
standard 4 mm jacks. PC software provided.
Demoboard
TLE8201R
Multi-channel switch
TLE 8201R
Door module power IC
This board is designed to demonstrate the performance of our
Demoboard
linear LED driver TLE 4242G and TLE 4309G with Osram high
TLE4242G LED
brightness LEDs. It is possible to choose between the two drivers. driver/TLE4309
A potentiometer allows the adjustment of the PWM duty-cycle for
dimming the LEDs.
Transceiver
TLE 8712EE
Powertrain system IC
Demoboard
TLE6389-2GV
Embedded power
TLE 6250G
TLE 6251G
TLE 6251DS
TLE 8250
CAN-LIN transceivers
Multi-purpose buck controller for external PMOS switch, 5 V
or adjustable output voltage, maximum of 2.3 A output current,
low quiescent current.
LED driver
TLE 7810
TLE 7824
TLE 7826
Embedded power /
smart relay driver IC
Demoboard
TLE8366
DC/DC converter
TLE 4309
TLE 4242G
LED driver demoboard
This application board enables you to test the performance of the
TLE 8366 basic buck converter. It is equipped with a TLE 8366EV
for variable output voltages (preadjusted to 4.8 V). The board
offers several possibilities to modify the schematic and also the
possibility to drive LEDs.
DC/DC converter
TLE 6389-2GV
Buck converter
Demoboard
BTS5672E
BTS5682E
Multi-channel switch
TLE 8366
Basic buck converter
The SPOC II power easy kit is intended to be used as a system
evaluation board for several automotive power devices like
BTS 5662E, BTS 5672E and BTS 5682E. It consists of a control
unit and power unit. The control unit is intended to control the
power unit as well as receive commands from a user interface.
Multi-half bridges
Automotive
Board Name
Door module power IC
Products
Description
Order No.
TLE 8203E
This evaluation kit is intended to provide first-hand experience of
the mirror IC TLE 8203E which contains all the functions to drive
power outputs within a mirror control module, i.e. mirror heating
and lamps. It provides access to all inputs and outputs with
standard 4 mm jacks. PC software is also included.
Demoboard
TLE8203E
Designed specifically for automotive (mirror adjustment drive)
and industrial motion control applications. The IC contains
3 half-bridge outputs. It provides access to all inputs and outputs
with standard 4 mm jacks. PC software is provided.
Demoboard
TLE6208-3G
Designed specifically for automotive (climate control flap drive)
and industrial motion control applications. The IC contains 6 HSS
channels and 6 LSS channels and can be used as a freely configurable
switch, half bridge or H-bridge driver. It provides access to all
inputs and outputs with standard 4 mm jacks.
Demoboard
TLE6208-6G
Multi-half bridges
TLE 6208-3G
Triple half-bridge driver
Multi half-bridge
driver
TLE 6208-6G
Hex half-bridge driver
Multi half-bridge
driver
TLE 4729G
2-phase stepper motor
driverr IC
The TLE 4729G is designed specifically for automotive stepper
Demoboard
motor applications such as automatic head beam leveling, idle
TLE4729G
speed control, etc. The device offers peak current control with fixed
frequency (current chopper) of up to half step modes where the
target current is set up by an external sense resistor, R sense.
Stepper driver
TLE 8444SL
The TLE 8444SL is designed specifically for automotive applications
such as idle speed control. The device is suitable to drive stepper
motors requiring voltage control or DC motors.
Demoboard
TLE8444SL
Contains two of our NovalithIC™ components in a typical H-bridge
configuration including peripheral components and reverse
polarity protection. The board is suitable for all members of the
NovalithIC™ family (BTN 79XXB).
Demoboard BTN7930B
Demoboard BTN7933B
Demoboard BTN7960B
Demoboard BTN7963B
Demoboard BTN7970B
Demoboard BTN7971B
Demoboard BTN7973B
This evaluation kit is designed to demonstrate the performance
of the TLE 7183F 3-phase motor driverr. Typical applications are
cooling fans, water pumps, electrohydraulics and electric power
steering. The TLE 7183F is designed for a 12 V power net.
Demoboard
TLE7183F REV. 1.0
Multi half-bridge
Quad half-bridge driver IC driver
BTN 793xB
BTN 796xB
BTN 797xB
NovalithIC™ H-bridge
Half-bridge
TLE 7183F
3-phase motor driverr
Motor driverr
TLE 8209-1
H-bridge for DC-motor
applications
This evaluation kit is designed to demonstrate the performance of
Demoboard
the TLE 8209-1, a monolithic IC for driving DC motors and stepper
TLE8209-1
motors in safety-critical automotive applications, in particular
electronic throttle and exhaust gas recirculation valve control. The
TLE 8209-1 features three selectable current ranges, two selectable
slew rate settings and extensive diagnosis via SPI. The device
monitors the digital supply voltage VDD and shuts down the output
stages in case of VDD over- or undervoltage, thus providing a safe
H-bridge motor driver switch-off path in case of malfunction of the digital control circuitry.
TLE 7209-2R
Bridge for idle speed and
throttle control
H-bridge motor driver
TLE 7241E
Constant current
Constant current control IC control IC
This evaluation kit is designed to demonstrate the performance of
Demoboard
the TLE 7209-2R. The board is intended to be used with an external TLE7209-2R
power supply, an external signal generator and an oscilloscope to
visualize the signals. SPI signals can be generated using a parallel
port on a PC. All the application components needed are already
supplied on the board.
This evaluation kit is designed to demonstrate the performance of
Demoboard
the TLE 7241E, a 2-channel, low-side constant current driver with
TLE7241E
programmable current, dither amplitude, dither frequency and slew Evaluation kit
rate. Best suited for transmission applications using proportional
valves.
7
Automotive
Board Name
Powertrain system IC
Powertrain system IC
Powertrain system IC
Products
Order No.
TLE 6288R
The TLE 6288R is a 6-channel smart multi-channel switch with
embedded protection, diagnosis and configurable functions.
Channels 1-3 are high-side switches with integrated charge pump
and can be programmed to do autonomous peak and hold current
regulation with PWM. Channels 4-6 can be configured as high-side
or low-side switches. This IC can be used to drive loads in high-side
Multi-channel switch or low-side applications with switching frequencies up to 10 kHz.
Demoboard
TLE6288R
TLE 6244X
This evaluation board is designed to demonstrate the performance
of the TLE 6244X. The application board is equipped with a 5 V
linear voltage regulator U1 (TLE 4264G) that can be connected
Multi-channel switch directly to 12 V (battery).
Demoboard
TLE6244X
TLE 8110E
A smart 10-channel low-side switch with serial peripheral interface (SPI). To be used together with the microcontroller XC2287
power easy kit (to be ordered seperately).
Demoboard
TLE8110E
A smart 12-channel low-side switch with serial peripheral interface (SPI). To be used together with the microcontroller XC2287
power easy kit (to be ordered seperately).
Demoboard
TLE8112EE
Multi-channel switch
TLE 8112EE
Powertrain system IC
Description
Multi-channel switch
TLE 8510EE
Powertrain system IC
A smart 10-channel low-side switch with TTL-based multi-channel
Demoboard
and asynchronous upstream specifically designed for powertrain TLE8510EE
applications. To be used together with the microcontroller TriCore™
Multi-channel switch TC1766 demo board (to be ordered seperately).
TLE 8512EE
Powertrain system IC
A smart 12-channel low-side switch with TTL-based multi-channel Demoboard
and asynchronous upstream specifically designed for powertrain TLE8512EE
applications. To be used together with the microcontroller TriCore™
Multi-channel switch TC1766 demo board (to be ordered seperately).
TLE 8710EE
Powertrain system IC
Powertrain system IC
Powertrain system IC
Powertrain system IC
A smart 10-channel low-side switch with LVDS-based micro second
channel and asynchronous upstream specifically designed for powertrain applications. To be used together with the microcontroller
Multi-channel switch TriCore™ TC1766 demo board (to be ordered seperately).
Demoboard
TLE8710EE
TLE 8110SA
Demoboard
TLE8110SA
Multi-channel switch
TLE 8512SA
A smart 12-channel low-side switch with TTL-based multichannel and asynchronous upstream specifically designed for
powertrain applications. To be used together with the microcontMulti-channel switch roller TriCore™ TC1766 demo board (to be ordered seperately).
Demoboard
TLE8512SA
TLE 8712SA
Demoboard
TLE8712SA
A smart 12-channels low-side switch with LVDS based micro second
channel and asynchronous upstream specifically designed for
powertrain applications. To be used together with the microconMulti-channel switch troller TriCore™ TC1766 demo board (to be ordered seperately).
TLE 8264-2E, TLE 8264E
TLE 8263-2E, TLE 8263E
TLE 8262-2E, TLE 8262E
TLE 8261-2E , TLE 8261E
System basis chip
System basis chip
TLE 7263
System basis chip
8
A smart 10-channel low-side switch with serial peripheral interface (SPI). To be used together with the microcontroller XC2287
power easy kit (to be ordered seperately).
System basis chip
This universal demo board is intended to be used for a system
Demoboard
evaluation board for the TLE 7263 system basis chip. The board
TLE8264E V2.0
allows the user to evaluate all the device features and functions
as well as to quickly start the development of the application software. The evaluation kit consists of the power unit and the control
unit (power easy kit - to be ordered seperately). The graphical
user interface allows for easy controlling and monitoring of the
SBC via SPI (e.g. automatic watchdog triggering).
This universal demo board is intended to be used for a system evalu- Demoboard
ation board for the TLE 7263 system basis chip. Hermes system basis TLE7263E
chip family. The board allows the user to evaluate all the device
features and functions as well as to quickly start the development
of the application software. The evaluation kit consists of the power
unit and the control unit (power easy kit - to be ordered seperately).
The graphical user interface allows for easy controlling and monitoring of the SBC via SPI (e.g. automatic watchdog triggering).
Automotive
Board Name
TLE 4997x board
Products
Description
Order No.
TLE 4997x
Programmer for the linear Hall TLE 4997 family.
TLE4997
PROGRAMMER
SP000439708
Programmer for the linear Hall TLE 4998 family.
TLE4998
PROGRAMMER
SP000425300
The kit consists of a PGSISI box and an evaluation board and
allows evaluation of an integrated Giant Magneto Resistance (iGMR)
angle sensor. The evaluation board (PCB) with angle sensor and
rotating magnet is available seperately (without PGSISI box).
TLE5011 Evalkit
TLE5011 Evalboard
(PCB)
The kit consists of a PGSISI box and an evaluation board and
allows evaluation of an integrated Giant Magneto Resistance (iGMR)
angle sensor. The evaluation board (PCB) with angle sensor and
rotating magnet is available seperately (without PGSISI box).
TLE5012 Evalkit
TLE5012 Evalboard
(PCB)
Evaluation and programming tool for crankshaft (TLE 492x) and
camshaft (TLE 498x) Hall sensors.
TLE498x
Programmer Kit,
SP000451572
The SP30 development kit allows software development for the
tire pressure sensor SP30 as well as in-circuit debugging. The
development kit includes an SP30 socket board and debugging
hardware, SP30 / SP30T samples, an integrated software development environment, documentation and sample software.
SP30 DEVELP KIT
TYPE 6 SP000434364
(with SP30 samples)
SP30T DEVELP KIT
TYPE 6 SP000434368
(with SP30T samples)
Linear Hall sensor
TLE 4998x
TLE 4998x board
Linear Hall sensor
TLE 5011
TLE 5011 evalkit
Angle sensor
TLE 5012
TLE 5012 evalkit
Angle sensor
TLE 492x, TLE 498x
Powertrain programmer kit Powertrain Hall sensor
SP30
SP30 / SP30T
development kit
Tire pressure sensor
SP37
SP37 development kit
Tire pressure sensor
KP 12x
USB pressure-sensor stick
Pressure sensor
KP 106
KP 106 kit
Wireless control
USB-UWLink
KP MAP/BAP Demonstrator, SP000463010
KP Demo pressure
Coupling,
SP000534842
KP Extension board,
SP000534838
Side airbag sensor
TDA 5150
SmartLEWIS™ TX
USB stick for the transmitter TDA 5150 for 315/434/868/915 MHz
and output power of 5/10 dBm.
TDA5150-USBUWLink
A low-cost, low-current broadband UHF low noise amplifier with
the ESD-robust BFP 540ESD RF transistor.
BFP540ESD board
A low-cost, low-noise amplifier for 315 and 434 MHz RKE applications
using the ESD-robust BFP 460 RF transistor.
BFP460 board
Transmitter
RF transistor
BFP 460
BFP 460 eval board
KP 12x sensor stick with internal KP 125 sensor. The KP MAP/ BAP
demonstrator is an easy and ready to use tool to discover the
capabilities of the Infineon KP pressure sensor family. The required
software and promotional material is included in the integrated
memory stick and can be downloaded right away. All features
are implemented in a USB stick with a graphical user interface to
manipulate and evaluate the sensor behavior.
Evalkit for side airbag pressure sensors. The KP 106 evaluation kit KP106 KIT,
for side airbag pressure sensors provides the possibility to evaluate SP000367787
the complete functionality of the KP 106 side airbag pressure
sensor family. This includes voltage supply, an easy sensor insertion
socket and signal conditioning. The calculated pressure values can
be transmitted to the PC using the PGSISI adapter.
BFP 540ESD
BFP 540ESD eval board
The SP37 development kit enables evaluation of the entire feature
SP37-315-8 DEVELOP
set of the tire pressure sensor SP37, such as RF transmitter
KIT SP000518282 (with
functionality and LF receiver functionality; additionally it allows
315 MHz transmitter)
software development and in-circuit debugging. The development SP37-434-8 DEVELOP
kit includes the required evaluation hardware, SP37 devices, an
KIT SP000518286 (with
integrated software development environment, documentation
434 MHz transmitter)
and a selection of sample software.
RF transistor
9
Automotive
Board Name
BFR 360L3 eval board
Products
Description
Order No.
BFR 360L3
This board shows BFR 360L3 in different ISM-band applications.
It is also available for BFR 340L3 and BFR 380L3. Please specify
the applications and the transistor in your order.
BFR360L3 board
RF transistor
BFR 460L3
BFR 460L3 eval board
RF transistor
BFR 182
BFR 182 board
Power module
6ED100HP1-FA
6ED100HP2-FA
Hybrid-Kit for
HybridPACK™2
Power module
1ED020I12-FA
6ED100HP2-FA
Microcontroller
XC866
KIT _AK_XC866_LIN_
STEPPER
10
Complete inverter/DC-DC solution for applications up to 20 kW (Mild
Hybrid) with IGBT module HybridPACK™1 (FS400R06KE3) 600 V/
400 A, employing coreless transformer isolated driver (1ED020I12- FA)
and overvoltage protection (active clamping). Possibility of different motor interfaces: encoder, GMR, resolver. Microcontroller
board included based on 32-bit TC1767 (TriCore™ family)
SP000554548
Complete inverter/DC-DC solution for applications up to 80 kW
(Full Hybrid Electrical Vehicles) with IGBT module HybridPACK™2
(FS800R07A2E3) 650 V/800 A, employing coreless transformer isolated
driver (1ED020I12- FA) and overvoltage protection (active clamping).
Possibility of different motor interfaces: encoder, GMR, resolver. Microcontroller board included based on 32-bit TC1767 (TriCore™ family).
SP000554548
Driver board for HybridPACK™2 IGBT modules, employing
coreless transformer single-channel driver 1ED020I12-FA.
IGBT module to be ordered seperately.
SP000552868
Driver board for HybridPACK™1 IGBT modules, employing
coreless transformer single-channel driver 1ED020I12-FA.
IGBT module to be ordered seperately.
SP000521526
Complete inverter/DC-DC solution for applications up to 80 kW
(Full Hybrid Electrical Vehicles) with IGBT module HybridPACK™2
(FS800R07A2E3) 650 V/800 A, employing coreless transformer
isolated driver (1ED020I12- FA) and overvoltage protection
(active clamp)
SP000635950
XC866 LIN stepper motor kit: To jump start stepper motor design
and provide an introduction to the Local Interconnect Network
(LIN) protocol, Infineon offers the XC866 LIN stepper motor
application kit.
KIT_AK_XC866_LIN_
STEPPER
Combines microcontroller easy kit XC2287 with interface to other
demo boards (to be ordered seperately). Enables quick start for
software evaluation for driving external power outputs placed
demo boards plugged onto the power easy kit. This can be used
as a universal body control module system evaluation tool.
Power Easy Kit
Microcontroller
XC2287
Power Easy Kit XC2287
SP000417056
Microcontroller
1ED020I12-FA
Hybrid-Kit for
HybridPACK™2
Evaluation board for ESD 24VS2U TVS, 2-channel unidirectional
diode designed for ESD/transient protection on LIN/CAN-bus
applications.
Microcontroller
1ED020I12-FA
6ED100HP1-FA
BFR182 board
ESD & EMI protection
1ED020I12-FA
HybridPACK™1
Hybrid-Kit for
HybridPACK™1
Low-cost RKE transmitter using BFR 182.
RF transistor
ESD 24VS2U
ESD 24VS2U board
This board shows the ESD-robust BFR 460L3 board in ISM and RKE BFR460L3 board
applications, as well as wideband LNA. Please specify the applications in your order.
Microcontroller
Motor control
Board Name
Products
Description
Microcontroller boards
Microcontroller
For microcontroller evaluation boards, please see “Microcontroller“ category.
TLE 7810
TLE 7824
TLE 7826
The kit contains two boards, a TLE 7826G evaluation board
together with a PCLIN programming and LIN interface card,
documentation, software and tools. This enables you from simply
playing with the device (without any software development) to
developing your own software application (2 kB limited Keil IDE).
Demoboard
TLE7826
This evaluation kit is intended to provide first-hand experience
of the door module power IC TLE 8201R which contains all the
functions to drive power outputs within a door module, i.e. main
lock, safe lock, mirror adjustment, mirror fold, mirror heating and
lamps. It provides access to all inputs and outputs with standard
4 mm jacks. PC software provided.
Demoboard
TLE8201R
This evaluation kit is intended to provide first-hand experience of
the mirror IC, TLE 8203E which contains all the functions to drive
power outputs within a mirror control module, i.e. mirror heating
and lamps. It provides access to all inputs and outputs with standard 4 mm jacks. PC software is also included.
Demoboard
TLE8203E
Designed specifically for automotive (mirror adjustment drive)
and industrial motion control applications. The IC contains
3 half-bridge outputs.
Demoboard
TLE6208-3G
Embedded power /
smart relay driver IC
Embedded power
TLE 8201R
Door module power IC
Multi-half bridges
TLE 8203E
Door module power IC
Order No.
Multi-half bridges
TLE 6208-3G
Multi half-bridge
Triple half-bridge driver
driver
11
Motor control
Board Name
Hex half-bridge driver
Products
Description
Order No.
TLE 6208-6G
Designed specifically for automotive (mirror adjustment drive)
and industrial motion control applications. The IC can be used as
a half-bridge or H contains 3 half-bridge driver outputs. Bridge
driver (3 half-bridge) for automotive applications (e.g. HVAC,
mirror). It provides access to all inputs and outputs with standard
4 mm jacks. PC software is provided.
Demoboard
TLE6208-6G
The TLE 4729G is designed specifically for automotive stepper
motor applications such as automatic head beam leveling, idle
speed control, etc. The device offers peak current control with
fixed frequency (current chopper) of up to half step modes where
the target current is set up by an external sense resistor, R sense.
Demoboard
TLE4729G
The TLE 8444SL is designed specifically for automotive applications
such as idle speed control. The device is suitable to drive stepper
motors requiring voltage control or DC motors.
Demoboard
TLE8444SL
Contains two of our NovalithIC™ components in a typical H-bridge
configuration including peripheral components and reverse polarity
protection. The board is suitable for all members of the NovalithIC™
family (BTN 79XXB).
Demoboard BTN7930B
Demoboard BTN7933B
Demoboard BTN7960B
Demoboard BTN7963B
Demoboard BTN7970B
Demoboard BTN7971B
Demoboard BTN7973B
This evaluation kit is designed to demonstrate the performance
of the TLE 7183F 3-phase motor driver. Typical applications are
cooling fans, water pumps, electrohydraulics and electric power
steering. The TLE 7183F is designed for a 12 V power net.
Demoboard
TLE7183F REV. 1.0
Multi half-bridge driver
TLE 4729G
2-phase stepper motor
driver IC
Stepper driver
TLE 8444SL
Multi half-bridge
Quad half-bridge driver IC driver
BTN 793xB
BTN 796xB
BTN 797xB
NovalithIC™ H-bridge
Half-bridge
TLE 7183F
3-phase motor driver
3-phase gate driver
TLE 8209-1
H-bridge for DC-motor
applications
H-bridge motor driver
TLE 7209-2R
Bridge for idle speed
and throttle control
12
H-bridge motor driver
This evaluation kit is designed to demonstrate the performance of
Demoboard
the TLE 8209-1, a monolithic IC for driving DC motors and stepper
TLE8209-1
motors in safety-critical automotive applications, in particular
electronic throttle and exhaust gas recirculation valve control. The
TLE 8209-1 features three selectable current ranges, two selectable
slew rate settings and extensive diagnosis via SPI. The device
monitors the digital supply voltage VDD and shuts down the output
stages in case of VDD over- or undervoltage, thus providing a safe
switch-off path in case of malfunction of the digital control circuitry.
This evaluation kit is designed to demonstrate the performance
of the TLE 7209-2R. The board is intended to be used with an external power supply, an external signal generator and an oscilloscope to visualize the signals. SPI signals can be generated using
a parallel port on a PC. All the application components needed
are already supplied on the board.
Demoboard
TLE7209-2R
Motor control
Board Name
7ED020E12-FI-W2*
Products
Description
Order No.
FP35R12W2T4,
2ED020I12-FI
EiceDRIVER™
Power stage for industrial IGBT drives using a PIM module in an
Easy2B package containing three-phase input rectifier, brake
chopper and inverter bridge using IGBT4 devices. Coreless
transformer halfbridge IGBT drives are employed for gate control
and protection.
7ED020E12-FI-W2_
EVAL SP000367466
Gate driver
EconoDUAL™3,
1ED020I12-F
EiceDRIVER™
2ED100E12-F2*
Gate driver
EconoPACK™+,
1ED020I12-F
EiceDRIVER™
6ED100E12-F2*
2ED300E17-SFO_
EVAL SP000355559
Adapter board containing additional booster stage suitable for
driving 1200 V PrimePACK™ in single or parallel configuration.
Operates together with 2ED300C17-SFO. Module to be ordered
seperately.
MA300E12_
EVAL SP000372039
Adapter board containing additional booster stage suitable for
driving 1700 V PrimePACK™ in single or parallel configuration.
Operates together with 2ED300C17-SFO. Module to be ordered
seperately.
MA300E17_
EVAL SP000355552
3-phase drive application kit: 0.75 kW power stage for consumer
and industrial drives, XC886 motor control unit with molded
CIPOS™ module and integrated AC/DC converter. Seperately
application kit for PMSM/BLDC and induction motors (110 and
220 V).
KIT_AK_3PHASE_
DRIVE_V1
Power modules
8-bit microcontroller
XC886, CIPOS™
IKCS12F60AA,
CoolSET™
ICE3B0565G
KIT_AK_ 3PHASE_
DRIVE_V1
This evaluation board for the 2ED300C17-S IGBT driver board may
be used for all medium and high power IGBT modules up to 1700 V.
Electrical as well as optical (optional) interfacing is provided. For
some modules, complementary module adapters are available
to connect to the module. Complementary module adapters to be
ordered seperately.
Power modules
PrimePACK™2
PrimePACK™3
MA300E17*
6ED100E12-F2_
EVAL SP0005055796
Gate driver
PrimePACK™2
PrimePACK™3
MA300E12*
IGBT driver board for EconoPACK™+ IGBT modules, employing
coreless transformer single-channel driver 1ED020I12-F.
IGBT module to be ordered seperately.
Gate driver
2ED300C17-S
EiceDRIVER™
2ED300E17-SFO*
Driver board for EconoDUAL™3 IGBT modules, employing coreless 2ED100E12-F2_
transformer single-channel driver 1ED020I12-F. IGBT module to
EVAL SP000405780
be ordered seperately.
Drive kit
* Please remark that Industrial Power products are only available through our special distributors: Arihant (India), Comelec (Italy), Dabo (Korea),
Dachs (Denmark), EBV (EMEA), Elecbiz (Taiwan), Eurotone (China), Hans Buch (Denmark), Jingchuan (China), Nisko (Israel), Symmetron (Russia)
In the Americas, please contact Infineon Tech. Industrial Power Inc., phone: #908-236-5600
13
Motor control
Board Name
KIT_AK_XC800_FOC_V1
Products
Description
Order No.
XC886
Field-oriented-control (FOC) evaluation kit based on XC886/888
including documentation, ready-to-use FOC software, compiler,
debugger, USB-CAN interface, DAVE™ mother system and a 24 V
PMSM motor.
KIT_AK_XC800_
FOC_V1
Motor control demo kit for block commutation (20 ~ 45 V, 0 ~ 16 A)
on BLDC motors.
KIT_AK_BLDC_
MDB_V1
Drive kit
XC866
KIT_AK_BLDC_MDB_V1
Drive kit
XC866
KIT _AK_
XC866_LIN_STEPPER
Drive kit
XC886/888 family
KIT_AK_DaveDrive_V3
14
KIT_AK_XC866_
BLDC
XC878 with vector computer, XE164 real time signal controller
with MAC unit. Power board 23 – 56 V, 7.5 A. 15 W PMSM motor
and plug-in 24 V power supply. Using Infineon 6ED003L06 gate
driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply
and TLE 4264 LDO. Software package including source code.
Sensorless FOC of PMSM with XE164. Sensorless FOC of PMSM
with XC878.
KIT_AK_FOCDRIVE_V1
XC878 with vector computer, XE164 real time signal controller
with MAC unit. Power board 23 – 56 V, 7.5 A. 15 W PMSM motor
and plug-in 24 V power supply. Using Infineon 6ED003L06 gate
driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power
supply and TLE 4264 LDO. Software package including source
code. Simultaneous control of two PMSMs with sensorless FOC &
digital PFC with XE164. Sensorless FOC & digital PFC with XC878.
V/f control of ACIM for quick evaluation.
KIT_AK_
2MOTORDRIVE_V1
Drive kit
XC878, XE164F
Dual motor drive
application kit
12 V BLDC application kit: pp to 20 A BLDC motor, inverter, MCU
(XC866). Free compiler (SDCC) and debugger (HITOP). Tutorial
videos demonstrating how to use the kit.
Drive kit
XC878, XE164F
FOC drive application kit
Scalable low voltage PMSM motor driver kit with DAVE™ Drive auto KIT_AK_
code generator. Uses the full power of Infineon microcontrollers, e.g. DaveDrive_V3
it generates optimized FOC code for XC878 using a vector computer
and XE164 with MAC unit supporting single cycle 16 x 16bit multiplication and accumulation. This usually requires expert knowledge
in both motor control and assembler programming.
Drive kit
XC866
BLDC (brushless DC)
application kit
XC866 LIN stepper motor kit: To jump start stepper motor design
KIT_AK_XC866_
and provide an introduction to the Local Interconnect Network (LIN) LIN_STEPPER
protocol, Infineon offers the XC866 LIN stepper motor application kit.
Drive kit
Industrial control &
automation
Board Name
Products
Description
Microcontroller boards
Microcontroller
For microcontroller evaluation boards, please see “Microcontroller” category.
Wireless control kits
Transmitter, transceiver and receiver
For transmitter, transceiver and receiver evaluation boards, please see
“Communication” category.
BTS 3256D
Protected low-side power switch (10 mΩ at 25 °C). This board
Demoboard
enables easy startup and connectivity for the new power HITFET™ BTS3256D
BTS 3256D. Enables easy read out of digital status via LED, and
easy slew rate change via variable resistor on board.
HITFET™ protected
low-side power switch
Low-side switch
TLE 7231G
SPIDER (SPI Driver for
Enhanced Relay Control)
Demoboard
TLE7231G
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7234SE and TLE 7237SL .
Demoboard
TLE7234/7237
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7235SE and TLE 7238SL.
Demoboard
TLE7235/7238
Multi-channel switch
TLE 7235EM
TLE 7235SE
TLE 7238SL
SPIDER (SPI Driver for
Enhanced Relay Control)
SPI Driver for Enhanced Relay Control (SPIDER). This board is designed to interface with the universal body control module system
evaluation tool.
Multi-channel switch
TLE 7234EM
TLE 7234SE
TLE 7237SL
SPIDER (SPI Driver for
Enhanced Relay Control)
Order No.
Multi-channel switch
15
Industrial control &
automation
Board Name
SPIDER (SPI Driver for
Enhanced Relay Control)
Products
Description
Order No.
TLE 7236EM
TLE 7236SE
TLE 7239SL
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7236SE and TLE 7239SL.
Demoboard
TLE7236/7239
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7240SL, TLE 7243SL and TLE 7244SL.
Demoboard
TLE724XSL
For a quick start to lab evaluation, this demoboard drives loads
such as heating, glow plugs or lamps in 12 V DC applications.
It uses two devices from the BTS 500x0-1EGA product family,
which can be used in parallel but also to drive two independent
loads. The board can be used on a stand-alone basis, but also in
combination with the power easy kit for a quick start to software
evaluation.
Demoboard
BTS50050-1EGA
Demoboard
BTS50060-1EGA
Demoboard
BTS50070-1EGA
Demoboard
BTS50080-1EGA
Evaluation kit to demonstrate the functionality of the BTS 5241L,
BTS 5234G and BTS 5230GS. These are 2-channel, smart power
PROFET TM (high-side switches), except BTS 6143D which is a
single-channel device. The control board is equipped with a
C868BA microcontroller. It is built to be reverse polarity protected.
The power boards are directly connected to the control board.
Demoboard
PROFET™ V2.0
Multi-channel switch
TLE 7240SL
TLE 7243SL
TLE 7244SL
SPIDER (SPI Driver for
Enhanced Relay Control)
Multi-channel switch
BTS 500x0-1EGA
HIC-PROFET™
High-side switch
BTS 5241L
BTS 5234G
BTS 5230GS
BTS 6143D
PROFET™ demo kit
This board is part of the PROFET™ demo kit.
PROFET™ demo kit
This board is part of the PROFET™ demo kit.
PROFET™ demo kit
High-side switch
TLE 8366
Basic buck converter
16
Multi-purpose buck controller for external PMOS switch, 5 V or
adjustable output voltage, maximum of 2.3 A output current,
low quiescent current.
Demoboard
TLE6389-2GV
The kit contains two boards, a TLE 7826G evaluation board together with a PCLIN programming and LIN interface card,
documentation, software and tools. This enables you from simply
playing with the device (without any software development) to
developing your own software application (2 kB limited Keil IDE).
Demoboard
TLE7826
DC/DC converter
TLE 7810
TLE 7824
TLE 7826
Embedded power /
smart relay driver IC
Demoboard
TLE8366
DC/DC converter
TLE 6389-2GV
Buck converter
This application board enables you to test the performance of the
TLE 8366 basic buck converter. It is equipped with a
TLE 8366EV for variable output voltages (preadjusted to 4.8 V).
The board offers several possibilities to modify the schematic
and also the possibility to drive LEDs.
Embedded power
Industrial control &
automation
Board Name
CAN-LIN transceivers
Products
Description
TLE 6250G
TLE 6251G
TLE 6251DS
TLE 8250
Basic control unit to generate CAN-, LIN- and FlexRay datastreams. CAN-LIN Universal
Plug & play, ready to use system to build up complete CAN-, LIN-,
Demoboard
and FlexRay networks. Additional software examples are provided
to allow timing measurements and to verify signal integrity.
Transceiver
TLE 6208-3G
Triple half-bridge driver
Multi half-bridge
driver
TLE 4729G
2-phase stepper motor
driverr IC
The TLE 4729G is designed specifically for automotive stepper
motor applications such as automatic head beam leveling, idle
speed control, etc. The device offers peak current control with
fixed frequency (current chopper) of up to half step modes where
the target current is set up by an external sense resistor, R sense.
Demoboard
TLE4729G
The TLE 8444SL is designed specifically for automotive applications
such as idle speed control. The device is suitable to drive stepper
motors requiring voltage control or DC motors.
Demoboard
TLE8444SL
Contains two NovalithIC™s in a typical H-bridge configuration
including peripheral components and reverse polarity protection.
The board is suitable for all members of the NovalithIC™ family
(BTN 79XXB).
Demoboard BTN7930B
Demoboard BTN7933B
Demoboard BTN7960B
Demoboard BTN7963B
Demoboard BTN7970B
Demoboard BTN7971B
Demoboard BTN7973B
This evaluation kit is designed to demonstrate the performance
of the TLE 7183F 3-phase motor driver. Typical applications are
cooling fans, water pumps, electrohydraulics and electric power
steering. The TLE 7183F is designed for a 12 V power net.
Demoboard
TLE7183F REV.1.0
Half-bridge
TLE 7183F
3-phase motor driver
Designed specifically for automotive (climate control flap drive)
Demoboard
and industrial motion control applications. The IC contains 6 HSS TLE6208-6G
channels and 6 LSS channels and can be used as a freely configurable switch, half bridge or H-bridge driver. It provides access to all
inputs and outputs with standard 4 mm jacks.
Multi half-bridge
driver
BTN 793xB
BTN 796xB
BTN 797xB
NovalithIC™ H-bridge
3-phase gate driver
TLE 8209-1
H-bridge for DC motor
applications
Bridge for idle speed
and throttle control
Demoboard
TLE6208-3G
Stepper driver
TLE 8444SL
Quad half-bridge driver IC
Designed specifically for automotive (mirror adjustment drive)
and industrial motion control applications. The IC contains
3 half-bridge outputs. It provides access to all inputs and outputs
with standard 4 mm jacks.
Multi half-bridge
driver
TLE 6208-6G
Hex half-bridge driver
Order No.
This evaluation kit is designed to demonstrate the performance of
the TLE 8209-1, a monolithic IC for driving DC motors and stepper
motors in safety-critical automotive applications, in particular electronic throttle and exhaust gas recirculation valve control. The
TLE 8209-1 features three selectable current ranges, two selectable
slew rate settings and extensive diagnosis via SPI. The device monitors the digital supply voltage VDD and shuts down the output stages
in case of VDD over- or undervoltage, thus providing a safe switch-off
H-bridge motor driver path in case of malfunction of the digital control circuitry.
Demoboard
TLE8209-1
TLE 7209-2R
Demoboard
TLE7209-2R
H-bridge motor driver
This evaluation kit is designed to demonstrate the performance of
the TLE 7209-2R. The board is intended to be used with an external
power supply, an external signal generator and an oscilloscope to
visualize the signals. SPI signals can be generated using a parallel
port on a PC. All the application components needed are already
supplied on the board.
17
Industrial
industrial control &
automation
Board Name
Products
Description
Order No.
TLE 7241E
This evaluation kit is designed to demonstrate the performance of
the TLE 7241E, a 2-channel, low-side constant current driver with
programmable current, dither amplitude, dither frequency and
slew rate. Best suited for transmission applications using
proportional valves.
Demoboard
TLE7241E
Evaluation kit
Programmer for the linear Hall TLE 4997 family.
TLE4997
PROGRAMMER
SP000439708
Programmer for the linear Hall TLE 4998 family.
TLE4998
PROGRAMMER
SP000425300
Constant current
Constant current control IC control IC
TLE 4997x
TLE 4997x board
Linear Hall sensor
TLE 4998x
TLE 4998x board
Linear Hall sensor
TLE 5011
TLE 5011 evalkit
Angle sensor
TLE 5012
TLE 5012 evalkit
The kit consists of a PGSISI box and an evaluation board and alTLE 5011 Evalkit
lows evaluation of an integrated Giant Magneto Resistance (iGMR) TLE 5011 Evalboard
angle sensor. The evaluation board (PCB) with angle sensor and
(PCB)
rotating magnet is available seperately (without PGSISI box).
The kit consists of a PGSISI box and an evaluation board and alTLE 5012 Evalkit
lows evaluation of an integrated Giant Magneto Resistance (iGMR) TLE 5012 Evalboard
angle sensor. The evaluation board (PCB) with angle sensor and
(PCB)
rotating magnet is available seperately (without PGSISI box).
Angle sensor
KP 12x
KP 12x sensor stick with internal KP 125 sensor. The KP MAP/ BAP
demonstrator is an easy and ready to use tool to discover the
capabilities of the Infineon KP pressure sensor family. The required
software and promotional material is included in the integrated
memory stick and can be downloaded right away. All features are
implemented in a USB stick with a graphical user interface to manipulate and evaluate the sensor behavior.
KP MAP/BAP
demonstrator:
SP000463010
KP demo pressure
coupling:
SP000534842
KP extension board:
SP000534838
Coreless transformer isolated high-side 8-bit parallel data interface for 5 V input providing fully protected power switches and
handling currents up to 625 mA.
EVAL
2X8-ISO1H801G
Coreless transformer isolated high-side 8-bit serial data interface
for 5 V input providing fully protected power switches and handling
currents up to 625 mA.
EVAL
2X8-ISO1H802G
USB pressure-sensor stick Pressure sensor
ISO 1H801G
ISOFACE™
EVAL 2X8-ISO1H801G
Isolated high-side
driver
ISO 1H802G
ISOFACE™
Isolated high-side
EVAL 2X8-ISO1H802G
18
driver
Power management
Board Name
Basic buck converter
Products
Description
Order No.
TLE 8366
This application board enables you to test the performance of
the TLE 8366 basic buck converter. It is equipped with a
TLE 8366EV for variable output voltages (preadjusted to 4.8 V).
The board offers several possibilities to modify the schematic
and also the possibility to drive LEDs.
Demoboard
TLE8366
Multi-purpose buck controller for external PMOS switch, 5 V or
adjustable output voltage, maximum of 2.3 A output current, low
quiescent current.
Demoboard
TLE6389-2GV
CCM PFC controller for 300 W PFC evaluation board with 85~265 V
AC universal input and 393 V DC fixed output.
EVALPFC2ICE2PCS01
CCM PFC controller for 300 W PFC evaluation board with 85~265 V
AC universal input and 393 V DC fixed output.
EVALPFC2ICE2PCS02
DC/DC converter
TLE 6389-2GV
Buck converter
DC/DC converter
ICE 2PCS01
EVALPFC2-ICE2PCS01
Power control IC
ICE 2PCS02
EVALPFC2-ICE2PCS02
Power control IC
19
Power management
Board Name
EVALPFC2-ICE2PCS03
Products
Description
Order No.
ICE 2PCS03
CCM PFC controller for 300 W PFC evaluation board with 85~265 V
AC universal input and 393 V DC fixed output.
EVALPFC2ICE2PCS03
CCM PFC controller for 300 W PFC evaluation board with 85~265 V
AC universal input and 393 V DC fixed output.
EVALPFC2ICE2PCS04
QR controller for 160 W TV applications.
EVALQRSICE2QS01-160W
QR controller for 25 W DVD, VCD and VCR.
EVALS-25WICE2QS01
QR controller for 80 W LCD TV, home audio or printer applications.
EVALQRSICE2QS02G-80W
12 W SMPS demoboard with CoolSET™ F3 w/o latched - off mode.
EVALSF3ICE3B0565
F3 CoolSET™ for 20 W SMPS evaluation board.
EVALSF3ICE3B1565
F3 CoolSET™ for 30.4 W SMPS evaluation board.
EVALSF3ICE3B2565
F3 CoolSET™ for 40 W 18 V SMPS evaluation board.
EVALSF3ICE3B2065P
F3 CoolSET™ for 100 W 18 V SMPS evaluation board.
EVALSF3ICE3A5565P
F3 CoolSET™ for 12 W 5.0 V SMPS evaluation board.
EVALSF3ICE3B0565J
Power control IC
ICE 2PCS04
EVALPFC2-ICE2PCS04
Power control IC
ICE 2QS01
EVALQRS-ICE2QS01- 160W Power control IC
ICE 2QS01
EVALS-25W-ICE2QS01
Power control IC
ICE 2QS02G
EVALQRS-ICE2QS02G80W Power control IC
ICE 3B0565
EVALSF3-ICE3B0565
Power control IC
ICE 3B1565
EVALSF3-ICE3B1565
Power control IC
ICE 3B2565
EVALSF3-ICE3B 25 65
Power control IC
ICE 3B2065P
EVALSF3-ICE3B2065P
Power control IC
ICE 3A5565P
EVALSF3-ICE3A5565P
Power control IC
ICE 3B0565J
EVALSF3-ICE3B0565J
20
Power control IC
Power management
Board Name
EVALM-ICE3A0365
Products
Description
Order No.
ICE 3A0365
F3 CoolSET™ for 6 W 12.5 V SMPS evaluation board.
EVALMICE3A0365
F3 CoolSET™ for 15 W 5.0 V SMPS evaluation board.
EVALSF3ICE3A1065LJ
F3 CoolSET™ for 12 W 5.0 V SMPS evaluation board.
EVALSF3RICE3BR4765J
F3 CoolSET™ for 30 W 16 V SMPS evaluation board.
EVALSF3RICE3BR0665J
F3 CoolSET™ for 100 W 18 V SMPS evaluation board.
EVALSF3RICE3BR0665JF
F3 CoolSET™ for 15 W 5.0 V SMPS evaluation board.
EVALSF3ICE3A1065ELJ
F3 CoolSET™ for 40 W 18 V SMPS evaluation board.
EVALSF3RICE3BR2565JF
ICE 3DS01G: PWM controller for 28 W LCD monitor.
EVALSF3ICE3DS01G
ICE 3DS01L(G): F3 controller for 60 W LCD monitor, adapter,
DVD and STB.
EVALSF3ICE3DS01L(G)
ICE 3AS02: F3 controller for 60 W LCD monitor, adapter, DVD,
STB and auxiliary power supplies.
EVALSF3ICE3AS02
ICE 3BS03LJG: F3 controller for 60 W LCD monitor, adapter,
DVD, STB and auxiliary power supplies.
EVALSF3ICE3BS03LJG
Power control IC
ICE 3A1065LJ
EVALSF3-ICE3A1065 LJ
Power control IC
ICE 3BR4765J
EVALSF3R-ICE3BR4765J
Power control IC
ICE 3BR0665J
EVALSF3R-ICE3BR0665J
Power control IC
ICE 3BR0665JF
EVALSF3R-IC-3BR0665JF
Power control IC
ICE 3A1065ELJ
EVALSF3-ICE3A1065ELJ
Power control IC
ICE 3BR2565JF
EVALSF3R-IC-3BR2565JF
Power control IC
ICE 3DS01G
EVALSF3-ICE3DS01G
Power control IC
ICE 3DS01L(G)
EVALSF3-ICE3DS01L(G)
Power control IC
ICE 3AS02
EVALSF3-ICE3AS02
Power control IC
ICE 3BS03LJG
EVALSF3-ICE3BS03LJG
Power control IC
21
Lighting & LED
Board Name
Basic buck converter
Products
Description
Order No.
TLE 8366
This application board enables you to test the performance of the
TLE 8366 basic buck converter. It is equipped with a TLE 8366EV
for variable output voltages (preadjusted to 4.8 V). The board
offers several possibilities to modify the schematic and also the
possibility to drive LEDs.
Demoboard
TLE8366
Multi-purpose buck controller for external PMOS switch, 5 V or
adjustable output voltage, maximum of 2.3 A output current, low
quiescent current.
Demoboard
TLE6389-2GV
DC/DC converter
TLE 6389-2GV
Buck converter
DC/DC converter
TLE 4309
TLE 4242G
LED driver demo board
LED driver
BCR 450
1 W and 3 W LED demo board LED driver
BCR 402W
12 V low current LED
demo board
22
LED driver
This board is designed to demonstrate the performance of our linear
Demoboard
LED driver TLE 4242G and TLE 4309G with Osram high brightness LEDs. TLE4242G LED
It is possible to choose between the two drivers. A potentiometer
driver/TLE4309
allows the adjustment of the PWM duty-cycle for dimming the LEDs.
Shows how to drive high-power LEDs (1 W, 3 W) with the BCR 450
- Max. supply voltage: 27 V, max. current up to 2 A
- BCR 450 + the 3 different booster transistors on one board
- BAS 3007A-RPP on board (optional)
- Can be connected to a string of LEDs
- PWM signal can be applied
BCR450 board
The BCR 40xW series is an ideal drop-in replacement for resistor-based BCR402W 12 V
channel letter solutions
LED board
- 12 V supply voltage, 20 mA current
- BCR 402 W with footprint for external resistor for adjusting the current
- Footprint for Schottky diodes (can be replaced by jumpers)
- 3 x 0.2 W LEDs in series, type: OSRAM TopLED LW T6SG
Lighting & LED
Board Name
24 V Low current LED
demo board
Products
Description
Order No.
BCR 402W
The BCR 402 W can be operated at higher voltages than 18 VDC by
simply putting a string of LEDs above the LED driver to reduce the
supply voltage below 18 VDC
- 24 V supply voltage, 20 mA current - BCR 402 W with footprint
for external resistor for adjusting the current
- Footprint for Schottky diodes (can be replaced by jumpers)
- 6 x 0.2 W LEDs in series, type: OSRAM TopLED LW T6SG
BCR402W 24V
LED board
TDA 4863 flyback controller & PFC in a single-stage topology
- TLE 4305 CV CC feedback
- Each LED string is driven at 350 mA by the BCR 450 in combination
with the external transistor BCX 68-25
- Optimized for low-cost multi-LED string system with BCR 450 linear
current regulators
BCR450
TDA4863G board
24 V/350 mA low-cost and highly efficient LED PSU for multiple
LEDs.
EVALACDC
LED-ICE3B0365JG
LED driver
TDA 4863, BCR 450
Off-line LED driver demo
board for street lighting
LED driver
ICE 3B0365JG
LED driver board with
CoolSET™
Power control Ics
BTS 3256D
HITFET™ protected
low-side power switch
Protected low-side power switch (10 mΩ at 25 °C). This board
Demoboard
enables easy startup and connectivity for the new power HITFET™ BTS3256D
BTS 3256D. Enables easy read out of digital status via LED, and
easy slew rate change via variable resistor on board.
Low-side switch
TLE 7231G
SPI Driver for Enhanced Relay Control (SPIDER). This board is
designed to interface with the universal body control module
system evaluation tool.
Demoboard
TLE7231G
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7234SE and TLE 7237SL.
Demoboard
TLE7234/7237
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7235SE and TLE 238SL.
Demoboard
TLE7235/7238
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7236SE and TLE7239SL.
Demoboard
TLE7236/7239
The board is designed to interface with the universal body control
module system evaluation tool. The set contains adapter boards
for TLE 7240SL, TLE 7243SL and TLE 7244SL.
Demoboard
TLE724XSL
Evaluation kit to demonstrate the functionality of the BTS 5241L,
BTS 5234G and BTS 5230GS. This are 2-channel, smart power
PROFET TM (high-side switches), except BTS 6143D which is
a single-channel device. The control board is equipped with a
C868BA microcontroller. It is built to be reverse polarity protected.
The power boards are directly connected to the control board.
Demoboard
BTS50050-1EGA
Demoboard
BTS50060-1EGA
Demoboard
BTS50070-1EGA
Demoboard
BTS50080-1EGA
SPIDER (SPI Driver for EnMulti-channel switch
hanced Relay Control)
TLE 7234EM
TLE 7234SE
TLE 7237SL
SPIDER (SPI Driver for EnMulti-channel switch
hanced Relay Control)
TLE 7235EM
TLE 7235SE
TLE 7238SL
SPIDER (SPI Driver for Enhanced Relay Control)
Multi-channel switch
TLE 7236EM
TLE 7236SE
TLE 7239SL
SPIDER (SPI Driver for Enhanced Relay Control)
Multi-channel switch
TLE 7240SL
TLE 7243SL
TLE 7244SL
SPIDER (SPI Driver for Enhanced Relay Control)
Multi-channel switch
BTS 500x0-1EGA
HIC-PROFET™
High-side switch
23
Lighting & LED
Board Name
Products
Description
Order No.
BTS 5241L
BTS 5234G
BTS 5230GS
BTS 6143D
Evaluation kit to demonstrate the functionality of the BTS 5241L,
BTS 5234G and BTS 5230GS. These are 2-channel, smart power
PROFET TM (high-side switches), except BTS 6143D which is a singlechannel device. The control board is equipped with a C868BA
microcontroller. It is built to be reverse polarity protected. The
power boards are directly connected to the control board.
Demoboard
PROFET™ V2.0
PROFET™ demo kit
This board is part of the PROFET™ demo kit.
PROFET™ demo kit
This board is part of the PROFET™ demo kit.
PROFET™ demo kit
High-side switch
BTS 5590GX
SPOC (SPI power controller
for advanced light control)
The universal body control module is intended to be used as a system Demoboard
evaluation board for several automotive power devices. It consists of a BTS 5590GX
control unit and a power unit. The control unit is intended to control the
power unit as well as to receive commands from a user interface. The
power unit contains two BTS 5590GX for system evaluation purposes.
This board is part of the SPOC (SPI power controller for advanced
light control) demo kit.
BTS 5590GX demoboard
Multi-channel switch
BTS 5662E
BTS 5672E
BTS 5682E
SPOC II - Power easy kit
Multi-channel switch
ICB 2FL01G
The SPOC II power easy kit is intended to be used as a system evaluation
board for several automotive power devices like BTS 5662E,
BTS 5672E and BTS 5682E. It consists of a control unit and
power unit. The control unit is intended to control the power
unit as well as receive commands from a user interface.
Demoboard
BTS5672E/
BTS5682E
Demoboard for fluorescent lamp ballast with smart ballast
controller 2nd generation ICB 2FL01G for 1x54 W T5 lamp.
EVAL board
ICB2FL01G
Smart ballast
Evaluation board ICB2FL01G controller
ICB 2FL02G
Evaluation board ICB2FL02G
Demoboard for dimmable fluorescent lamp ballast with smart ballast EVAL board
controller 2nd generation ICB 2FL02G for 1x26 W TC-TEL lamp.
ICB2FL02G
Smart ballast
controller
ICB 1FL02G
Demoboard for fluorescent lamp ballast with smart ballast
controller 1st generation ICB 1FL03G for 1x54 W T5 lamp.
EVAL board
ICB1FL02G
Demoboard for fluorescent lamp ballast with smart ballast
controller 2nd generation ICB 2FL02G for 1x54 W T5 lamp.
EVAL board
ICB2FL02G
Demoboard for fluorescent lamp ballast with smart ballast
controller 1st generation ICB 1FL03G for 1x54 W T5 lamp.
EVAL board
ICB1FL02G
Smart ballast
Evaluation board ICB1FL02G controller
ICB 2FL02G
ICB 2FL02G
Smart ballast
controller
ICB 1FL03G
Smart ballast
Evaluation board ICB 1FL03G controller
24
Consumer
Board Name
Products
Description
Microcontroller boards
Microcontroller
For microcontroller evaluation boards, please see “Microcontroller” category.
Wireless control kits
Transmitter, transceiver and receiver
For transmitter, transceiver and receiver evaluation boards, please see
“Communication” category.
TLE 4997x
Programmer for the linear Hall TLE 4997 family.
TLE4997
PROGRAMMER
SP000439708
Programmer for the linear Hall TLE 4998 family.
TLE4998
PROGRAMMER
SP000425300
The kit consists of a PGSISI box and an evaluation board and allows
evaluation of an integrated Giant Magneto Resistance (iGMR)
angle sensor. The evaluation board (PCB) with angle sensor and
rotating magnet is available seperately (without PGSISI box).
TLE 5011 Evalkit
TLE 5011 Evalboard
(PCB)
TLE 4997x board
Linear Hall sensor
TLE 4998x
TLE 4998x board
Linear Hall sensor
TLE 5011
TLE 5011 evalkit
Order No.
Angle sensor
25
Consumer
Board Name
TLE 5012 evalkit
Products
Description
Order No.
TLE 5012
The kit consists of a PGSISI box and an evaluation board and alTLE 5012 Evalkit
lows evaluation of an integrated Giant Magneto Resistance (iGMR) TLE 5012 Evalboard
angle sensor. The evaluation board (PCB) with angle sensor and
(PCB)
rotating magnet is available seperately (without PGSISI box).
Angle sensor
KP 12x
KP 12x sensor stick with internal KP 125 sensor. The KP MAP/ BAP
demonstrator is an easy and ready to use tool to discover the
capabilities of the Infineon KP pressure sensor family. The required software and promotional material is included in the integrated memory stick and can be downloaded right away. All features
are implemented in a USB stick with a graphical user interface to
manipulate and evaluate the sensor behavior.
KP MAP/BAP
Demonstrator:
SP000463010
KP Demo pressure coupling:
SP000534842
KP Extension board:
SP000534838
ESD and EMI protection (audio filter) for differential microphone
interfaces.
BGF100 board
ESD and EMI filter array for high-speed multi-media card
(HSMMC).
BGF104 board
ESD and EMI filter 10-channel array for LCD interface.
BGF109 board
USB pressure-sensor stick Pressure sensor
BGF 100
BGF 104C Hipac eval board ESD & EMI protection
BGF 104C
BGF 104C Hipac eval board ESD & EMI protection
BGF 109C
BGF 109C Hipac eval board ESD & EMI protection
BGF 200
BGF 200 Hipac eval board
ESD & EMI protection
BGA 616
BGA 616 eval board
26
ESD and EMI protection (audio filter) for single-ended microphone BGF200 board
interface.
RF MMIC
Evaluation board for BGA 616. BGA 616 is one of our general purpose 50 T gain-block family. Boards for BGA 612 and BGA 614 are
available in ISAR as well.
BGA616 board
Consumer
Board Name
ESD 8V0 series eval board
Products
Description
Order No.
ESD 8V0 series
Evaluation board for the ESD 8V0 series TVS-protection diodes.
These diodes are available in different packages either for singleor dual-channel protection. Please select the board version in
ISAR accordingly.
SP000417066
SP000417084
SP000417082
SP000417086
SP000417068
Evaluation board for ESD 5V0 series TVS-protection diodes.
These diodes are available in different packages for single- or
multi-channel protection. Please select the board version in
ISAR accordingly.
SP000417072
SP000417060
SP000417062
ESD protection for RF antennas using Infineon ESD 0P2RF.
This diode is available in two packages: TSLP-2 (equivalent to
0402 inch) and TSSLP-2 (equivalent to 0201 inch).
SP000535786
ESD protection for RF antennas using Infineon ESD 0P4RFL. The
package is TSLP-4.
SP000417094
ESD protection of audio, speaker and headset lines with
ESD 5V3S1B-02LRH diode. Special feature of this diode is
very low clamping voltage for protection of applications
operating at a maximum voltage between -5.3 V/+5.3 V.
SP000628748
ESD & EMI protection
ESD 5V0 series
ESD 5V0 series eval board
ESD & EMI protection
ESD 0P2RF
ESD 0P2RF-02LRH board
ESD & EMI protection
ESD 0P4RFL
ESD 0P4RFL board
ESD & EMI protection
ESD 5V3S1B-02LRH
ESD 5V3S1B-02LRH board ESD & EMI protection
ESD 5V3U1U-02LRH
ESD protection of digital high speed data interfaces with
SP000417042
ESD 5V3U1U-02LRH diode. This diode has ultralow capacitance
of 0.4pF (1 MHz) and ESD absorption capability of 20 kV exceeding
IEC61000-4-2 standard. Enables application in USB2.0, USB3.0,
HDMI 1.3, HDMI 1.4, DisplayPort, DVI, etc. Package is TSLP-2
(equivalent to 0402")
ESD 5V3U1U-02LRH board ESD & EMI protection
ESD 5V3U1U-02LS
ESD 5V3U1U-02LS board
ESD protection of digital high speed data interfaces with single
SP000417046
line ESD 5V3U1U-02LS diode. This diode has ultralow capacitance
of 0.4pF (1 MHz) and ESD absorption capability of 20 kV exceeding
IEC61000-4-2 standard. Enables application in USB2.0, USB3.0,
HDMI 1.3, HDMI 1.4, DisplayPort, DVI, etc. Package is smallest
TVS in the world: TSSLP-2 (equivalent to 0201").
ESD & EMI protection
27
Consumer
Board Name
Products
Description
Order No.
ESD 5V3U2U-03LRH
ESD protection of digital high speed data interfaces with
SP000417074
ESD 5V3U2U-03LRH diode. This diode has ultralow capacitance
of 0.4pF (1 MHz) and ESD absorption capability of 20 kV exceeding
IEC61000-4-2 standard. Enables protection of two lines with one
device in applications like USB2.0, USB3.0, HDMI 1.3, HDMI 1.4,
DisplayPort, DVI, etc. Package is leadless 3-pin TSLP-3,
size equivalent to 0402.
ESD 5V3U2U-03LRH board ESD & EMI protection
ESD 5V3U2U-03F
ESD 5V3U2U-03F board
SP000417078
ESD & EMI protection
ESD 5V3U4RRS
ESD 5V3U4RRS board
ESD protection of digital high speed data interfaces with
ESD 5V3U2U-03F diode. This diode has ultralow capacitance of
0.4pF (1 MHz) and ESD absorption capability of 20 kV exceeding
IEC61000-4-2 standard. Enables protection of two lines with one
device in applications like USB2.0, USB3.0, HDMI 1.3, HDMI 1.4,
DisplayPort, DVI, etc. Package is 3-pin TSFP-3.
ESD protection of digital high speed data interfaces with
SP000417080
ESD 5V3U4RRS array diode. This diode has ultralow capacitance
of 0.4pF (1 MHz) and ESD absorption capability of 15 kV exceeding
IEC61000-4-2 standard. It is the perfect solution for easy PCB
layout and reduced component count in USB 2.0 and USB 3.0
applications. Package is SOT363.
ESD & EMI protection
ESD 5V3U4U-HDMI
ESD protection of digital high speed data interfaces with
ESD 5V3U4U-HDMI array diode in TSLP-9 package (2.3 mm x 1 mm)
This diode has ultralow capacitance of 0.4pF (1 MHz) and ESD
absorption capability of 20 kV exceeding IEC61000-4-2 standard.
Because of flow through package it is the ideal solution for
protection of up to 4 data lines in HDMI and DisplayPort interfaces. Other applications like SD card protection in slim & small
devices greatly benefit from the ultrathin package (0.3 mm).
SP000417076
ESD and transient protection in ADSL, VDSL and other broadband
applications. Preferred solution because of extremely low clamping voltage at high peak currents, lower capacitance and overall
superior ESD absorption capability.
SP000417036
Evaluation board for ESD 24VS2U TVS, 2-channel unidirectional
diode designed for ESD/transient protection on LIN/CAN-bus
applications.
ESD24VS2U board
Evaluation board for the ESD 8V0 series TVS-protection diodes.
These diodes are available in different packages either for singleor dual-channel protection. Please select the board version in
ISAR accordingly.
SP000417056
ESD 5V3U4U-HDMI board ESD & EMI protection
DSL 70
DSL 70-board
ESD & EMI protection
ESD 24VS2U
ESD 24VS2U board
ESD & EMI protection
ESD 8V0 series
ESD 8V0 series eval board ESD & EMI protection
28
Consumer
Board Name
ESD 0P8RFL-board
Products
Description
Order No.
ESD 0P8RFL
Evaluation board for ESD 0P8RFL ESD-protection diodes. This
diode is able to protect one RF line due to its low capacitance.
ESD8V0R1B-02LRH
board
Evaluation board for ESD 1P0RF series ESD-protection diodes.
This diode is able to protect one or two RF lines due to its low
capacitance. It is available in different packages. Please select
the board version in ISAR accordingly.
SP000417048
A medium power RF SPDT switch in super small 0.79 x 0.54 mm²
chip-sale package for medium power wireless applications up to
2.5 GHz. Can be used for example as band select switch, antenna
diversity switch, bypass switch or Rx-Tx switch.
BGS12A board
A medium power RF SPDT switch in tiny 1.4 x 1.26 mm² TSLP7-6
package for medium power wireless applications up to 2.5 GHz.
Can be used for example as band select switch, antenna diversity
switch, bypass switch or Rx-Tx switch.
BGS12AL7-6 board
ESD & EMI protection
ESD 1P0RF series
ESD 1P0RF-board
ESD & EMI protection
BGS 12A
BGS 12A eval board
RF switch
BGS 12AL7-6
BGS 12AL7-6 eval board
RF switch
BGS 12AL7-4
BGS 12AL7-4 eval board
RF switch
BGS 13AL12
BGS 13AL12 eval board
A medium power RF SPDT switch in 2.3 x 1.5 mm² TSLP7-4 package BGS12AL7-4 board
for medium power wireless applications up to 2.5 GHz. Can be
used for example as band select switch, antenna diversity switch,
bypass switch or Rx-Tx switch.
A medium power RF SP3T switch with additional termination port
in tiny 2.0 x 2.0 mm² TSLP12 package. Can be used for example
as WCDMA diversity switch or band select switch in digital tuner
applications.
BGS13AL12 board
RF switch
29
Communication
Board Name
Products
Description
Basic control unit to generate CAN-, LIN- and FlexRay datastreams. CAN-LIN Universal
Plug & play, ready to use system to build up complete CAN-, LIN-,
Demoboard
and FlexRay networks. Additional software examples are provided
to allow timing measurements and to verify signal integrity.
CAN-LIN transceivers
TLE 6250G
TLE 6251G
TLE 6251DS
TLE 8250
Transceiver
TDA 5150
SmartLEWIS™ TX
Evaluation board for the transmitter TDA 5150. Boards for
315/434/868/915 MHz and output power of 5/10 dBm available.
The TDA 5150 system interface board (TDA 5150 SIB) is required
for device evaluation together with the TDA5150_X_X board.
TDA5150_315_5 board
TDA5150_434_10 board
TDA5150_434_5 board
TDA5150_868_10 board
TDA5150_915_10 board
TDA5150 board
TDA5150 SIB board
USB stick for the transmitter TDA5150 for 315/434/868/915 MHz
and output power of 5/10 dBm.
TDA5150-USB-UWLink
Wireless control board
Transmitter
TDA 5150
SmartLEWIS™ TX
Wireless control
USB-UWLink
Transmitter
TDK 5100
Wireless control kit
Transmitter
TDK 5100F
Wireless control kit/ board Transmitter
30
Order No.
Evaluation kit for the transmitter TDK 5100 and receiver TDA 5210/ TDK5100TDA 5220 for 434/868 MHz.
TDA5220_434_5
TDK5100TDA5210_868_5
Evaluation kit for the transmitter TDK 5100F and receiver TDA 5220
for 434 MHz. Evaluation board for the transmitter TDK 5100F for
434 MHz.
TDK5100FTDA5220_434_5
TDK5100F_434_5
board
Communication
Board Name
Wireless control kit
Products
Description
TDK 5101
Evaluation kit for the transmitter TDK 5101 and receiver TDA 5211/ TDK5101TDA 5221 for 315 MHz.
TDA5211_315_5
TDK5101TDA5221_315_5
Transmitter
TDK 5101F
Wireless control kit
Wireless control kit/ board Transmitter
TDK 5111
Evaluation kit for the transmitter TDK 5111F and receiver TDA 5211 TDK 5111Ffor 315 MHz.
TDA5211_315_10
Evaluation kit for the transmitter TDK 5116F and receiver TDA 5220 TDK5116Ffor 868 MHz.
TDA5220_868_10
Evaluation kit for the transmitter TDA 7100 and receiver TDA 7200
for 434 MHz.
TDA7100TDA7200_434 _5
Evaluation kit for the transmitter TDA 7110 and receiver TDA 7210
for 868 MHz.
TDA7110TDA7210_868 _10
Transmitter
TDA 7110F
Wireless control kit
TDK5111TDA5221_315_10
Transmitter
TDA 7110
Wireless control kit
Evaluation kit for the transmitter TDK 5111 and receiver TDA 5221
for 315 MHz.
Transmitter
TDA 7100
Wireless control kit
Evaluation kit for the transmitter TDK 5110F and receiver TDA 5210 TDK5110Ffor 434 MHz. Evaluation board for the transmitter TDK 5110F for
TDA5210_434_10
434 MHz.
TDK5110F_434_10
board
Transmitter
TDK 5116F
Wireless control kit
TDK5110TDA5220_434_10
TDK5110TDA5220_868_10
Transmitter
TDK 5111F
Wireless control kit
Evaluation kit for the transmitter TDK 5110 and receiver TDA 5220
for 434/868 MHz.
Transmitter
TDK 5110F
Wireless control kit
Evaluation kit for the transmitter TDK 5101F and receiver TDA 5221 TDK5101Ffor 315 MHz.
TDA5221_315_5
Transmitter
TDK 5110
Wireless control kit
Order No.
Evaluation kit for the transmitter TDA 7110F and receiver TDA 7210 TDA7110Ffor 434 MHz.
TDA7210_434 _10
Transmitter
TDA 5102
Wireless control kit
Transmitter
Wireless control PMA
Starter Kit
PMA 7105
SmartLEWIS™ MCU
PMA 7106
SmartLEWIS™ MCU
PMA 7107
SmartLEWIS™ MCU
PMA 7110
SmartLEWIS™ MCU
Transmitter
Evaluation kit for the transmitter TDA 5102 and receiver TDA 5212
for 915 MHz.
TDA5102TDA5212_915_5
USB stick for evaluation of the transmitter with microcontroller
family PMA 71xx for 315/434/868 MHz. LF receiver and ADC
functionality are not supported.
PMAx110-315-5USB-RF KIT
PMAx110-434-5USB-RF KIT
PMAx110-868-10USB-RF KIT
31
Communication
Board Name
Products
Description
Wireless control
PMA evaluation Kit
PMA 7105
SmartLEWIS™ MCU
PMA 7106
SmartLEWIS™ MCU
PMA 7107
SmartLEWIS™ MCU
PMA 7110
SmartLEWIS™ MCU
Transmitter
Enhanced development tool for the transmitter with microcontroller PMA5110-315-5family PMA 71xx for 315/434/868 MHz. The evaluation board allows board
access to all pins for detailed measurement and supports the
PMA5110-434-5embedded LF receiver and ADC functionality of the SmartLEWIS™ board
MCU. This PMA evaluation board requires the system interface
PMA5110-868-10board (SmartLEWIS™ SIB) or PMA starter kit for connection to a PC. board
SmartLEWIS SIB
board
TDA 5210
Evaluation kit for the receiver TDA 5210 and transmitter
TDK 5100/TDK 5110F for 434/868 MHz.
TDK5100TDA5210_868_5
TDK5110FTDA5210_434_10
Evaluation kit for the receiver TDA 5211 and transmitter
TDK 5101/TDK 5111F for 315 MHz.
TDK5101TDA5211_315_5
TDK 5111FTDA5211_315_10
Evaluation kit for the receiver TDA 5212 and transmitter
TDA 5102 for 915 MHz.
TDA5102TDA5212_915_5
Evaluation kit for the receiver TDA 5220 and transmitter
TDK 5100/TDK 5100F/TDK 5110/TDK 5116F for 434/868 MHz.
TDK5100TDA5220_434_5
TDK5100FTDA5220_434_5
TDK5110TDA5220_434_10
TDK5110TDA5220_868_10
TDK5116FTDA5220_868_10
Evaluation kit for the receiver TDA 5221 and transmitter
TDK 5101/TDK 5101F/TDK 5111 for 315 MHz.
TDK5101TDA5221_315_5
TDK5101FTDA5221_315_5
TDK5111TDA5221_315_10
Evaluation board for the receiver TDA 5230 for 434/868 MHz.
TDA5230_434_5_
board
TDA5 230_868_5_
board
USB stick incl. RF daughterboard for the receiver TDA 5230 for
434 MHz.
TDA5230-434-USBUWLink
Evaluation board for the receiver TDA 5231 for 315 MHz.
TDA5231_315_5_
board
Evaluation kit for the receiver TDA 7200 and transmitter
TDA 7100 for 434 MHz.
TDA7100TDA7200_434 _5
Evaluation kit for the receiver TDA 7210 and transmitter
TDA 7110 for 868 MHz.
TDA7110TDA7210_868 _10
Wireless control kit
Receiver
TDA 5211
Wireless control kit
Receiver
TDA 5212
Wireless control kit
Receiver
TDA 5220
Wireless control kit
Receiver
TDA 5221
Wireless control kit
Receiver
TDA 5230
SmartLEWIS™ RX
Wireless control receiver
board
Receiver
TDA 5230
SmartLEWIS™ RX
Wireless control
USB-UWLink
Receiver
TDA 5231
SmartLEWIS™ RX
Wireless control receiver
board
Receiver
TDA 7200
Wireless control kit
Receiver
TDA 7210
Wireless control kit
32
Order No.
Receiver
Communication
Board Name
Wireless control
transceiver kit
Products
Description
Order No.
TDA 5250
Evaluation kit for the transceiver TDA 5250 for 868 MHz.
TDA5250TDA5250_868 Kit
Evaluation kit for the transceiver TDA 5251 for 315 MHz.
TDA5251TDA5251_315 Kit
Evaluation kit for the transceiver TDA 5252 for 915 MHz.
TDA5252TDA5252_915 Kit
Evaluation kit for the transceiver TDA 5255 for 434 MHz.
TDA5255TDA5255_434 Kit
This board shows BFP 405 in LNA applications. Please specify the
frequency (range) in your order.
BFP405 board
This board shows BFP 420 in LNA applications. Please specify the
frequency (range) in your order.
BFP420 board
This board shows BFP 640 in LNA applications. Please specify the
frequency (range) in your order.
BFP640 board
This board shows BFP 450 in LNA applications. Please specify the
frequency (range) in your order.
BFP450 board
The BFP 520 transistor as a low-cost 1900 MHz LNA.
BFP520 board
This board shows new SiGe:C RF-transistor BFP 720 (SOT343
package) in LNA applications. NF of 0.5 dB possible. Please
specify the frequency (range) in your order.
BFP720 board
This board shows new SiGe:C RF-transistor BFP 720F (TSFP-4
package) in LNA applications. NF of 0.5 dB possible. Please
specify the frequency (range) in your order.
BFP720F board
This board shows new SiGe:C RF-transistor BFR 720L3RH
(TSLP-3 package only 0.32 mm in height!) in LNA applications.
NF of 0.5 dB possible. Please specify the frequency (range)
in your order.
BFR720L3RH
Transceiver
TDA 5251
Wireless control
transceiver kit
Transceiver
TDA 5252
Wireless control
transceiver kit
Transceiver
TDA 5255
Wireless control
transceiver kit
Transceiver
BFP 405
BFP 405 eval board
RF transistor
BFP 420
BFP 420 eval board
RF transistor
BFP 640
BFP 640 eval board
RF transistor
BFP 450
BFP 450 eval board
RF transistor
BFP 520
BFP 520 board
RF transistor
BFP 720
BFP 720 board
RF transistor
BFP 720F
BFP 720F board
RF transistor
BFR 720L3RH
BFR 720L3RH board
RF transistor
33
Communication
Board Name
BFP 740 board
Products
Description
Order No.
BFP 740
This board shows BFP 740 in LNA applications. Please specify the
frequency (range) in your order.
BFP740 board
This board shows BFP 740F in LNA applications. Please specify
the frequency (range) in your order.
BFP740F board
This board shows BFP 405F in LNA applications. Please specify
the frequency (range) in your order.
BFP405F board
Evaluation board for BFR 740L3RH. This board is designed as a
wide-band LNA. It covers the range from 900 MHz up to 6 GHz.
BFR740L3RH board
This board shows BFP 640F in LNA applications. Please specify
the frequency (range) in your order.
BFP640F board
Evaluation board for BGA 622L7. BGA 622L7 is a multi-purpose
LNA MMIC. This board is available for GPS or 1.8 – 2.4 GHz
applications. Please specify the version in your order. AN89&90.
BGA622L7 board
BGA 628L7 is a wide-band low-noise amplifier MMIC with operating
frequency range of 0.4 - 6 GHz, in tiny TSLP-7-8 package. TR152.
BGA628L7 board
This board shows BFP 650F in LNA applications. Please specify
the frequency (range) in your order.
BFP650F board
Evaluation board for ESD 0P8RFL ESD-protection diodes. This
diode is able to protect one RF line due to its low capacitance.
ESD0P8RFL board
Evaluation board for ESD 1P0RF series ESD-protection diodes.
This diode is able to protect one or two RF lines due to its low
capacitance. It is available in different packages. Please select
the board version in ISAR accordingly.
SP000417050
SP000417052
RF transistor
BFP 740F
BFP 740F board
RF transistor
BFP 405F
BFP 405F eval board
RF transistor
BFR 740L3RH
BFP 740L3H eval board
RF transistor
BFP 640F
BFP 640F board
RF transistor
BGA 622L7
BGA 622L7 eval board
RF MMIC
BGA 628L7
BGA 628L7 eval board
RF MMIC
BFP 650F
BFP 650F eval board
RF transistor
ESD 0P8RFL
ESD 0P8RFL board
ESD & EMI protection
ESD 1P0RF series
ESD 1P0RF board
ESD & EMI protection
ESD 0P2RF
ESD 0P2RF-02LRH board
ESD & EMI protection
ESD 0P4RFL
ESD 0P4RFL board
34
ESD protection for RF antennas using Infineon ESD 0P2RF. This diode SP000535786
is available in two packages: TSLP-2 (equivalent to 0402 inch) and
TSSLP-2 (equivalent to 0201 inch).
ESD & EMI protection
ESD protection for RF antennas using Infineon ESD 0P4RFL,
package is TSLP-4.
SP000417094
Communication
Board Name
Products
Description
Order No.
ESD 5V3S1B-02LRH
ESD protection of audio, speaker and headset lines with ESD 5V3S1B- SP000628748
02LRH diode. Special feature of this diode is ist very low clamping
voltage for protection of applications operating at a maximum
voltage between -5.3 V/+5.3 V.
ESD 5V3S1B-02LRH board ESD & EMI protection
ESD 5V3U1U-02LRH
ESD 5V3U1U-02LRH board
ESD & EMI protection
ESD protection of digital high speed data interfaces with ESD 5V3U1U02LRH diode. This diode has ultralow capacitance of 0.4pF (1 MHz) and
ESD absorption capability of 20 kV exceeding IEC61000-4-2 standard.
Enables application in USB2.0, USB3.0, HDMI 1.3, HDMI 1.4, DisplayPort, DVI, etc. Package is TSLP-2 (equivalent to 0402").
SP000417042
ESD 5V3U1U-02LS
ESD 5V3U1U-02LS board
ESD protection of digital high speed data interfaces with single
SP000417046
line ESD 5V3U1U-02LS diode. This diode has ultralow capacitance
of 0.4pF (1 MHz) and ESD absorption capability of 20 kV exceeding
IEC61000-4-2 standard. Enables application in USB2.0, USB3.0,
HDMI 1.3, HDMI 1.4, DisplayPort, DVI, etc. Package is smallest TVS
ESD & EMI protection in the world: TSSLP-2 (equivalent to 0201").
ESD 5V3U2U-03LRH
ESD 5V3U2U-03LRH board
ESD protection of digital high speed data interfaces with ESD 5V3U2U- SP000417074
03LRH diode. This diode has ultralow capacitance of 0.4pF (1 MHz) and
ESD absorption capability of 20 kV exceeding IEC61000-4-2 standard.
Enables protection of two lines with one device in applications like
USB2.0, USB3.0, HDMI 1.3, HDMI 1.4, DisplayPort, DVI, etc. Package is
ESD & EMI protection leadless 3-pin TSLP-3, size equivalent to 0402".
ESD 5V3U2U-03F
ESD 5V3U2U-03F board
ESD & EMI protection
ESD 5V3U4RRS
ESD 5V3U4RRS board
ESD & EMI protection
ESD protection of digital high speed data interfaces with ESD 5V3U2U-03F SP000417078
diode. This diode has ultralow capacitance of 0.4pF (1 MHz) and ESD
absorption capability of 20 kV exceeding IEC61000-4-2 standard. Enables
protection of two lines with one device in applications like USB2.0, USB3.0,
HDMI 1.3, HDMI 1.4, DisplayPort, DVI, etc. Package is 3-pin TSFP-3.
ESD protection of digital high speed data interfaces with ESD 5V3U4RRS SP000417080
array diode. This diode has ultralow capacitance of 0.4pF (1 MHz) and
ESD absorption capability of 15 kV exceeding IEC61000-4-2 standard. It
is the perfect solution for easy PCB layout and reduced component count
in USB 2.0 and USB 3.0 applications. Package is SOT363.
ESD 5V3U4U-HDMI
ESD 5V3U4U-HDMI board
ESD protection of digital high speed data interfaces with ESD 5V3U4U-HDMI SP000417076
array diode in TSLP-9 package (2.3 mm x 1 mm) This diode has ultralow
capacitance of 0.4pF (1 MHz) and ESD absorption capability of 20 kV
exceeding IEC61000-4-2 standard. Because of flow through package, it
is the ideal solution for protection of up to 4 data lines in HDMI and DisplayPort interfaces. Other applications like SD card protection in slim & small
ESD & EMI protection devices greatly benefit from the ultrathin package (0.3 mm).
DSL 70
DSL 70-board
ESD and transient protection in ADSL, VDSL and other broadband
applications. Preferred solution because of extremely low clamping voltage at high peak currents, lower capacitance and overall
superior ESD absorption capability.
SP000417036
Evaluation board for the ESD 8V0 series TVS-protection diodes.
These diodes are available in different packages either for
single- or dual-channel protection. Please select the
board version in ISAR accordingly.
SP000417056"
Evaluation board for ESD 5V0 series TVS-protection diodes. These
diodes are available in different packages for single- or multi-channel
protection. Please select the board version in ISAR accordingly.
ESD8V0L1B-02LRH
board
Evaluation and programming tool for crankshaft (TLE 492x) and
camshaft (TLE 498x) Hall sensors.
TLE498x
Programmer Kit,
SP000451572
ESD & EMI protection
ESD 8V0 series
ESD 8V0 series eval board ESD & EMI protection
ESD 5V0 series
ESD 5V0 series eval board ESD & EMI protection
TLE 492x, TLE 498x
Powertrain programmer kit Powertrain Hall sensor
35
Communication
Board Name
BGB 707L7ESD board
Products
Description
Order No.
BGB 707L7ESD
This board shows new SiGe:C wideband MMIC BGB 707L7ESD
(ultra low noise, 4 kV at RF_in, power-off, current adjust, TSLP-7-1
package) in LNA applications. NF of 0.5 dB possible. Please specify
the frequency (range) in your order.
BGB707L7ESD board
This board shows new SiGe:C wideband MMIC BGB 717L7ESD
(ultra low noise, 4 kV at RF_in, power-off, TSLP-7-1 package,
Avago pin configuration) in LNA applications. NF of 0.5 dB
possible. Please specify the frequency (range) in your order.
BGB717L7ESD board
This board shows new SiGe:C broadband MMIC BGB 741L7ESD
(low noise, 4 kV at RF_in, power-off, current adjust, integrated
feedback, TSLP-7-1 package) in LNA applications. NF of 0.5 dB
possible. Please specify the frequency (range) in your order.
BGB741L7ESD board
Evaluation board for BGA 615L7. BGA 615L7 is a high-gain lownoise LNA MMIC for GPS with a NF of only 0.9 dB. AN91.
BGA615L7 board
Evaluation board for BGA 461. BGA 461 is a low-cost low-current
LNA MMIC for GPS application, gain 19.5 dB, NF 1.1 dB, Icc 4 mA.
BGA461 board
RF MMIC
BGB 717L7ESD
BGB 717L7ESD board
RF MMIC
BGB 741L7ESD
BGB 741L7ESD board
RF MMIC
BGA 615L7
BGA 615L7 board
RF MMIC
BGA 461
BGA 461 board
RF MMIC
BGA 715L7
BGA 715L7 board
RF MMIC
BGM 781N11
BGM 781N11
36
BGA728L7 board
Evaluation board for BGA 428. BGA 428 is a low-cost LNA MMIC.
This board is available for GPS and 1900 MHz applications.
Please specify the version in your order. AN62.
BGA428 board
Evaluation board for BGA 622. BGA 622 is a low-cost multi-purpose LNA MMIC. This board is available for GPS or 1.8 – 2.4 GHz
applications. Please specify the version in your order. AN69.
BGA622 board
A medium power RF SPDT switch in super small 0.79 x 0.54 mm2
chip-sale package for medium power wireless.
BGS12A board
RF MMIC
BGS 12A
BGS 12A eval board
Evaluation board for BGA 728L7. BGA 728L7 is a broadband low
noise amplifier for portable and mobile TV applications. This
board is available for UHF and ‘UHF+VHF‘. Please specify the
version in your order. AN163.
RF MMIC
BGA 622
BGA 622 eval board
BGM781N11 board
RF MMIC
BGA 428
BGA 428 eval board
Evaluation board for BGM 781N11. BGM 781N11 is a GPS FEM LNA
MMIC with pre-filter, LNA and post-filter integrated in one package.
TR138, TR139, TR143, TR144, TR145, AN184.
RF MMIC
BGA 728L7
BGA 728L7 board
Evaluation board for BGA 715L7. BGA 715L7 is a best-in-class LNA BGA715L7 board
MMIC for GPS application, gain 20 dB, NF 0.6 dB or 0.75 dB. Please
specify the version in your order. AN161.
RF switch
Communication
Board Name
BGS 12AL7-6 eval board
Products
Description
Order No.
BGS 12AL7-6
applications up to 2.5 GHz. Can be used for example as band
select switch, antenna diversity switch, bypass switch or
Rx-Tx switch.
BGS12AL7-6 board
RF switch
BGS 12AL7-4
BGS 12AL7-4 eval board
RF switch
BGS 13AL12
BGS 13AL12 eval board
BGA735N16 board
Evaluation board for BGA 751L7. BGA 751L7 is a single-band UMTS BGA751L7 board
LNA for band V/VI. It provides two gain-levels and on/off function,
supports the transceiver with the date rate of 14.4 Mbits/s.
BGA758L7 is a low noise amplifier MMIC for 5-6 GHz WLAN
application, in tiny TSLP-7-8 package.
BGA 758L7 board
Evaluation board for BGA 711L7 is a single wide-band UMTS LNA
BGA711L7 board
covering all frequencies 1.85 ... 2.62 GHz. It provides two gain modes and on/off function and supports the transceiver with a data
rate of 14.4 Mbits/s.
BGA 777L7 is a low-current, single-band, low-noise amplifier
MMIC for UMTS bands 7, 38 and 40 with frequency range
2.3 - 2.7 GHz.
BGA 777L7 board
PCS, GPS, Bluetooth, 2.4 GHz WLAN, SDARS LNA (2-stage 6 GHz
WLAN LNA). This board shows BFP 650 in LNA applications.
Please specify the frequency (range) in your order.
BFP650 board
RF MMIC
BFP 650
BFP 650 eval board
Evaluation board for BGA 735L16. BGA 736L16 is a triple-band
UMTS LNA with adjustable band combination. It provides two
gain modes and on/off function and supports the transceiver with
a data rate of 14.4 Mbits/s.
RF MMIC
BGA 777L7
BGA 777L7 eval board
BGA736L16 board
RF MMIC
BGA 711L7
BGA 711L7 eval board
Evaluation board for BGA 736L16. BGA 736L16 is a triple-band
UMTS LNA with adjustable band combination. It provides three
gain levels and on/off function and supports the transceiver with
a data rate of 7.2 Mbits/s.
RF MMIC
BGA 758L7
BGA 758L7 eval board
BGA734L16 board
RF MMIC
BGA 751L7
BGA 751L7 eval board
Evaluation board for BGA 734L16. BGA 734L16 is a triple-band
UMTS LNA with adjustable band combination. It provides two
gain modes and on/off function and supports the transceiver with
a date rate of 3.6 Mbits/s.
RF MMIC
BGA 735L16
BGA735N16 eval board
BGS13AL12 board
RF MMIC
BGA 736L16
BGA 736L16 eval board
A medium power RF SP3T switch with additional termination port
in tiny 2.0 x 2.0 mm² TSLP12 package. Can be used for example
as WCDMA diversity switch or band select switch in digital tuner
applications.
RF switch
BGA 734L16
BGA 734L16 eval board
A medium power RF SPDT switch in 2.3 x 1.5 mm² TSLP7-4 package BGS12AL7-4 board
for medium power wireless applications up to 2.5 GHz. Can be
used for example as band select switch, antenna diversity switch,
bypass switch or Rx-Tx switch.
Transistor
37
Microcontroller
Board Name
KIT_XC866_SK
Products
Description
Order No.
XC800 family XC866
Evaluation kit for the XC866 including documentation, compiler,
debugger, DAVE™ mother system v2.1, cables and U-link.
KIT_XC866_SK
Evaluation kit for the XC886/888 including documentation,
compiler, debugger and DAVE™ mother system v2.1.
KIT_XC888_SK
Microcontroller
XC800 family
XC886CM
KIT_XC888_SK
Microcontroller
C515C
KIT_C515C_SK
Microcontroller
XC822
Easy kit XC822
Microcontroller
XC864
Easy kit XC864
38
Evaluation kit for the C515 including documentation, compiler and KIT_C515C_SK
debugger.
Drive kit
- USB cable, CDROM, XC822-TSSOP16 hardware board, high power
LED module and technical documentation (user manual, data
sheets, board documentation, Errata sheets)
- Free development tools: DAVE™ Bench (compiler, debugger,
Flash loader)
- Examples with hands-on training
- Application
KIT_XC822_EK_V1
Evaluation kit for the XC864 including documentation, compiler,
debugger, operating system, parallel cable and one extension
board.
KIT_XC864_EK_V1
Microcontroller
Board Name
KIT_AK_XC800_FOC_V1
Products
Description
Order No.
XC886
Field-oriented-control (FOC) evaluation kit based on XC886/888
including documentation, ready-to-use FOC software, compiler,
debugger, USB-CAN interface, DAVE™ mother system and a
24 V PMSM motor.
KIT_AK_XC800_
FOC_V1
Drive kit
XC866
vKIT_AK_BLDC_MDB_V1
Drive kit
XC866
KIT_AK_XC866_LIN_
STEPPER
Drive kit
XC866
BLDC (brushless DC)
application kit
Drive kit
XC878, XE164F
Dual motor drive
application kit
Drive kit
XC22xxN – series
XC88x – series
Automotive BLDC motor
drive kit 12 V
Drive kit
XC878
Easy kit XC878
KIT_AK_
DaveDrive_V3
12 V BLDC application kit: pp to 20 A BLDC motor, inverter,
MCU (XC866). Free compiler (SDCC) and debugger (HITOP).
Tutorial videos demonstrating how to use the kit.
KIT_AK_XC866_BLDC
XC878 with vector computer, XE164 real time signal controller
with MAC unit. Power board 23 V - 56 V, 7.5 A. 15 W PMSM motor
and plug-in 24 V power supply. Using Infineon 6ED003L06 gate
driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power
supply and TLE 4264 LDO. Software package including source
code. Sensorless FOC of PMSM with XE164. Sensorless FOC of
PMSM with XC878.
KIT_AK_FOCDRIVE_V1
XC878 with vector computer, XE164 real time signal controller with MAC KIT_AK_
unit. Power board 23 V - 56 V, 7.5A. 15 W PMSM motor and plug-in 24 V
2MOTORDRIVE_V1
power supply. Using Infineon 6ED003L06 gate driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply and TLE 4264 LDO. Software
package including source code. Simultaneous control of two PMSMs
with sensorless FOC & digital PFC with XE164. Sensorless FOC & digital
PFC with XC878. V/f control of ACIM for quick evaluation.
Key features: scalable 3-phase inverter, example code: FOC & V/f for XC886 KIT_AK_TLE7184_V1
and XC2238N, Integrated protection features for high system reliability,
complete IDE software packages included, easy installation, plug & play
included: TLE 7184F power board (12V...24V/20A), BLDC / PMSM motor,
AC/DC power-supply (12V/2A), XC886 (8-bit) drive-card with 16-bit, arithmetic, XC2238N (16-bit) drive card, capable of running FOC code, USB drivemonitor, CD-Rom with software & documentation, cables and connectors
Evaluation kit for the XC878 including documentation, compiler,
debugger, operating system, parallel cable and one extension
board.
KIT_XC878_EK_V1
Evaluation kit for the XE162FN including Getting Started, DAVE TM,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XE162FN_V1
Evaluation kit for the XE162FN including Getting Started, DAVE TM,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XE164FN_V1
Drive kit
XE164FN
Easy kit XE164FN
Scalable low voltage PMSM motor driver kit with DAVE™ Drive auto
code generator. Uses the full power of Infineon microcontrollers, e.g.
it generates optimized FOC code for XC878 using a vector computer
and XE164 with MAC unit supporting single cycle 16 x 16 bit
multiplication and accumulation. This usually requires expert
knowledge in both motor control and assembler programming.
Drive kit
XE162FN
Easy kit XE162FN
KIT_AK_XC866_
LIN_STEPPER
Drive kit
XC878, XE164F
FOC drive application kit
XC866 LIN stepper motor kit: To jump start stepper motor design
and provide an introduction to the Local Interconnect Network
(LIN) protocol, Infineon offers the XC866 LIN stepper motor
application kit.
Drive kit
XC886/888 family
KIT_AK_DaveDrive_V3
Motor control demo kit for block commutation (20 ~ 45 V, 0 ~ 16 A) KIT_AK_BLDC_
on BLDC motors.
MDB_V1
Drive kit
39
Microcontroller
Board Name
Easy kit XE162FM
Products
Description
XE162FM
Evaluation kit for the XE162FM including Getting Started, DAVE ,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XE162FM_EK_V1
Evaluation kit for the XE164FM including Getting Started, DAVE TM,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XE164FM_EK_V1
Evaluation kit for the XE167FM including Getting Started, DAVE TM,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XE167FM_EK_V1
Evaluation kit for the XE167FH including Getting Started, DAVE TM,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XE167FH_EK_V1
Evaluation kit for the XE169FH including Getting Started, DAVE TM,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XE169FH_EK_V1
Evaluation kit for the C167CS including documentation, compiler
and debugger.
KIT_C167CS_SK
Evaluation kit for the XC167CI including documentation, compiler,
debugger, DAVE™ mother system v2.1 and a Flash programming
tool.
KIT_XC167CI_EK_V3
Evaluation kit for the XC164CM including documentation,
compiler, debugger, DAVE™ mother system v2.1 and a Flash
programming tool.
KIT_XC164CM_EK_V3
Evaluation kit for the XC164CS including documentation,
compiler, debugger, DAVE™ mother system v2.1 and a Flash
programming tool.
KIT_XC164CS_EK_V3
Evaluation kit for the XE164 including documentation, compiler,
debugger, DAVE™ mother system v2.1 and a Flash programming
tool.
KIT_XE164F_EK_V1
Evaluation kit for the XE167 including documentation, compiler,
debugger, DAVE™ mother system v2.1 and a Flash programming
tool.
KIT_XE167F_EK_V1
Drive kit
XE164FM
Easy kit XE164FM
Drive kit
XE167FM
Easy kit XE167FM
Drive kit
XE167FH
Easy kit XE167FH
Drive kit
XE169FH
Easy kit XE169FH
Microcontroller
C167CS
KIT_C167CS_SK
Microcontroller
XC167CI
KIT_XC167CI_EK_V3
Microcontroller
XC164CM
SK-XC164CM_EK_V3
Microcontroller
XC164CS
KIT_XC164CS_EK_V3
Microcontroller
XE164F
KIT_XE164F_EK_V1
Microcontroller
XE167F
KIT_XE167F_EK_V1
40
Order No.
TM
Microcontroller
Microcontroller
Board Name
Easy kit XC2336B
Products
Description
Order No.
Automotive safety
applications 233x
B-Series TQFP-64
Evaluation kit for the XC2336B including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XC2336B_SK
Evaluation kit for the XC2365B including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XC2365B_SK
Automotive body
Evaluation kit for the XC2238N including Getting Started, DAVE™,
applications XC223x technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
N-Series TQFP-64
debugging.
KIT_XC2238N_SK
Microcontroller
Automotive safety
applications 236x
B-Series TQFP-100
Easy kit XC2365B
Easy kit XC2238N
Microcontroller
Microcontroller
Automotive body
Evaluation kit for the XC2268N including Getting Started, DAVE™,
applications XC226x technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
N-series TQFP-100
debugging.
Easy kit XC2268N
Microcontroller
Automotive powertrain Evaluation kit for the XC2734X including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
applications 2734
power supply, virtual COM port and Flash programming and
X-Series TQFP-64
debugging.
Easy kit XC2734X
KIT_XC2336A_SK
Evaluation kit for the XC2365A including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XC2365A_SK
Evaluation kit for the XC2387A including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XC2387A_SK
Microcontroller
Automotive safety
applications 238x
A-Series TQFP-144
Easy kit XC2387A
Evaluation kit for the XC2336A including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
Microcontroller
Automotive safety
applications 236x
A-Series TQFP-100
Easy kit XC2365A
KIT_XC2764X_SK
Microcontroller
Automotive safety
applications 233x
A-Series TQFP-64
Easy kit XC2336A
KIT_XC2734X_SK
Microcontroller
Automotive powertrain Evaluation kit for the XC2764X including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
applications 2764
power supply, virtual COM port and Flash programming and
X-Series TQFP-100
debugging.
Easy kit XC2764X
KIT_XC2268N_SK
Microcontroller
Automotive body
Evaluation kit for the XC2237M including Getting Started, DAVE™, KIT_XC2237M_SK
applications XC223x technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
M-Series TQFP-64
debugging.
Easy kit XC2237M
Microcontroller
Automotive body
Evaluation kit for the XC2267M including Getting Started, DAVE™, KIT_XC2267M_SK
applications XC226x technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
M-Series TQFP-100
debugging.
Easy kit XC2267M
Microcontroller
41
Microcontroller
Board Name
Products
Description
Order No.
Automotive body
Evaluation kit for the XC2287M including Getting Started, DAVE™, KIT_XC2287M_SK
applications XC228x technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
M-Series TQFP-144
debugging.
Easy kit XC2287M
Microcontroller
Automotive powertrain Evaluation kit for the XC2765X including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
applications 2765
power supply, virtual COM port and Flash programming and
X-Serie TQFP-100
debugging.
Easy kit XC2765X
Microcontroller
Automotive powertrain Evaluation kit for the XC2785X including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
applications 2785
power supply, virtual COM port and Flash programming and
X-Series TQFP-144
debugging.
Easy kit XC2785X
KIT_XC2365_SK
Evaluation kit for the XC2267 including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XC2267_SK
Evaluation kit for the XC2287 including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XC2287_SK
Microcontroller
Automotive body
applications XC228
V-Series TQFP-144
Easy kit XC2287
Evaluation kit for the XC2365 including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
Microcontroller
Automotive body
applications XC226
X-Series TQFP-100
Easy kit XC2267
Microcontroller
Automotive powertrain Evaluation kit for the XC2766X including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
applications 2766
power supply, virtual COM port and Flash programming and
X-Series TQFP-100
debugging.
Easy kit XC2766X
Easy kit XC2298H
Evaluation kit for the XC2388C including Getting Started, DAVE™, KIT_XC2388C_SK
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
Microcontroller
Automotive body
applications XC228
X H-Series TQFP-144
Easy kit XC2288H
Evaluation kit for the XC2288H including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
debugging.
KIT_XC2288H_SK
Automotive body
Evaluation kit for the XC2298H including Getting Started, DAVE™,
applications XC229x technical documentation, compiler and debugger. USB cable for
power supply, virtual COM port and Flash programming and
H-Series TQFP-176
debugging.
KIT_XC2298H_SK
Microcontroller
Microcontroller
Automotive powertrain Evaluation kit for the XC2787X including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
applications 2787
power supply, virtual COM port and Flash programming and
X-Series TQFP-144
debugging.
Easy kit XC2787X
42
KIT_XC2786X_SK
Microcontroller
Automotive safety
applications 238x
C-Series TQFP-144
Easy kit XC2388C
KIT_XC2766X_SK
Microcontroller
Automotive powertrain Evaluation kit for the XC2786X including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
applications 2786
power supply, virtual COM port and Flash programming and
X-Series TQFP-144
debugging.
Easy kit XC2786X
KIT_XC2785X_SK
Microcontroller
Automotive safety
applications XC236
X-Series TQFP-100
Easy kit XC2365
KIT_XC2765X_SK
Microcontroller
KIT_XC2787X_SK
Board Name
Products
KIT_XC2797X_SK
Easy kit XC2797X
Automotive powertrain Evaluation kit for the XC2797X including Getting Started, DAVE™,
technical documentation, compiler and debugger. USB cable for
applications 2797
power supply, virtual COM port and Flash programming and
X-Series TQFP-176
debugging.
Microcontroller
KIT_XC2238N_
UCONNECT_USB
UConnect XC2238N
Automotive body
The UConnect XC2238N is a low-cost USB stick providing full evaluaapplications XC223x tion capability for the XC2000 16-bit family of microntrollers. The kit
includes development toolchains, demos, a CANopen EVA version
N-Series TQFP-64
and tutorials for quick installation and ease of. The UConnect USB
stick comes with a CAN extension board.
Microcontroller
XC2287
Combines microcontroller easy kit XC2287 with interface to other
demo boards (to be ordered separately). Enables quick start for
software evaluation for driving external power outputs placed
demo boards plugged onto the power easy kit. E.g. this can be
used as a universal body control module system evaluation tool.
Power Easy Kit
Evaluation kit for the TC1130 including Getting Started, technical
documentation, evaluation versions for compiler and debugger.
cable, power supply and extension board.
KIT_TC1130_SK_V1.5
Evaluation kit for the TC116x including documentation, compiler,
debugger, operating system, cable and one extension board.
KIT_TC116x_SK
Evaluation kit for the TC1762 and TC1766 including documentation,
compiler, debugger, operating system, parallel cable and one
extension board.
KIT_TC1766_SK
Evaluation kit for the TC1167 and TC1767 including Getting Started, technical documentation, evaluation versions for compiler
and debugger, USB cable, power supply and extension board.
KIT_TC1767_SK
Evaluation kit for the TC1796 including documentation, compiler,
debugger, operating system, parallel cable and one extension
board.
KIT_TC1796_SK
Evaluation kit for the TC1797 and TC1197 including Getting Started, technical documentation, evaluation versions for compiler
and debugger, USB cable, power supply and extension board.
KIT_TC1797_SK
KIT_XC800_
USCALE_USB
Microcontroller
The XC800 USCALE kit is a low-cost USB stick providing full evaluation capability for the XC866, XC886 and XC888 8-bit family of
microcontrollers, all on a single platform. The kit includes development toolchains, demos and tutorials for quick installation and
ease of use as well as access to the key features and hardware
signals of each of the three microcontrollers for more extensive
benchmarking and evaluation.
XC166 family
XC164CM
USB stick for XC164CM including tasking compiler, HITEX HiTop
debugger and TwinCAN demonstration programs.
KIT_XC164CM_
UCAN_USB
XE164F
The UConnect XE164 is a low-cost USB stick providing full evaluation capability for the new XE166 16 bit family of microcontrollers.
The kit includes development toolchains, demos, a CANopen EVA
version and tutorials for quick installation and ease of.
The UConnect USB stick comes with a CAN extension board.
KIT_XE164_
UConnect_USB
The miniWiggler is Infineon’s high-performance and cost-efficient
debugging tool for the future. On the host side, it has a USB
interface, which is available on every computer. On the device
side, the communication goes over Infineon 10-pin DAP or 16-pin
OCDSL1 interfaces. The miniWiggler has been designed specifically
to work in combination with Infineon’s Debug Access Software (DAS).
KIT_DAP_
MINIWIGGLER_USB
Power easy kit XC2287
Microcontroller
TC1130
KIT_TC1130_SK_V1.5
Description
Order No.
Microcontroller
TC116x family
SK TC116x-series starter kit Microcontroller
TC1762, TC1766
Easy kit TC1766
Microcontroller
TC1167, TC1767
Easy kit TC1767
Microcontroller
TC1796
Easy kit TC1796
Microcontroller
TC1797, TC1197
Easy kit TC1797
Microcontroller
XC866, XC886, XC888
XC800 USCALE start kit
XC164CM U CAN start kit
UConnect-CAN XE164
KIT_DAP_
MINIWIGGLER_USB
Microcontroller
Debugging tool for
all microcontrollers
supporting the DAP
interface
Microcontroller
Where to Buy
Infineon Distribution Partners worldwide
Please use our location finder to get in contact with your nearest Infineon distribution partner.
www.infineon.com/WhereToBuy
ENERGY EFFICIENCY
COMMUNICATIONS
SECURITY
Infineon Technologies – innovative semiconductor solutions for energy efficiency,
communications and security.
[ www.infineon.com/evalkits ]
Order No.
B192-H9214-G2-X-7600
Published by Infineon Technologies AG