PBSS2515E 15 V, 0.5 A NPN low VCEsat (BISS) transistor Rev. 02 — 21 April 2009 Product data sheet 1. Product profile 1.1 General description NPN low VCEsat Breakthrough In Small Signal (BISS) transistor in an ultra small SOT416 (SC-75) Surface-Mounted Device (SMD) plastic package. PNP complement: PBSS3515E. 1.2 Features n n n n n Low collector-emitter saturation voltage VCEsat High collector current capability IC and ICM High collector current gain (hFE) at high IC High efficiency due to less heat generation Smaller required Printed-Circuit Board (PCB) area than for conventional transistors 1.3 Applications n n n n n n DC-to-DC conversion MOSFET gate driving Motor control Charging circuits Low power switches (e.g. motors, fans) Portable applications 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit VCEO collector-emitter voltage open base - - 15 V IC collector current - - 0.5 A ICM peak collector current single pulse; tp ≤ 1 ms - - 1 A RCEsat collector-emitter saturation resistance IC = 500 mA; IB = 50 mA - 300 500 mΩ [1] Pulse test: tp ≤ 300 µs; δ ≤ 0.02. [1] PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 2. Pinning information Table 2. Pinning Pin Description 1 base 2 emitter 3 collector Simplified outline Graphic symbol 3 3 1 1 2 2 sym021 3. Ordering information Table 3. Ordering information Type number PBSS2515E Package Name Description Version SC-75 plastic surface-mounted package; 3 leads SOT416 4. Marking Table 4. Marking codes Type number Marking code PBSS2515E 1Q 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VCBO collector-base voltage open emitter - 15 V VCEO collector-emitter voltage open base - 15 V VEBO emitter-base voltage open collector IC collector current ICM peak collector current IBM Ptot - 6 V - 0.5 A single pulse; tp ≤ 1 ms - 1 A peak base current single pulse; tp ≤ 1 ms - 100 mA total power dissipation Tamb ≤ 25 °C [1] - 150 mW [2] - 250 mW Tj junction temperature - 150 °C Tamb ambient temperature −65 +150 °C Tstg storage temperature −65 +150 °C [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 1 cm2. PBSS2515E_2 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 02 — 21 April 2009 2 of 12 PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 006aaa412 300 Ptot (mW) (1) 200 (2) 100 0 0 40 80 120 160 Tamb (°C) (1) FR4 PCB, mounting pad for collector 1 cm2 (2) FR4 PCB, standard footprint Fig 1. Power derating curves 6. Thermal characteristics Table 6. Thermal characteristics Symbol Parameter Rth(j-a) Rth(j-sp) Conditions thermal resistance from junction to ambient in free air thermal resistance from junction to solder point Typ Max Unit - - 833 K/W [2] - - 500 K/W - - 170 K/W [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 1 cm2. PBSS2515E_2 Product data sheet Min [1] © NXP B.V. 2009. All rights reserved. Rev. 02 — 21 April 2009 3 of 12 PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 006aab472 103 Zth(j-a) (K/W) 102 duty cycle = 1 0.75 0.5 0.33 0.2 0.1 0.05 0.02 10 0.01 0 1 10−5 10−4 10−3 10−2 10−1 1 10 102 103 tp (s) FR4 PCB, standard footprint Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values 006aaa413 103 Zth(j-a) (K/W) 102 duty cycle = 1 0.5 0.33 0.75 0.2 0.1 0.05 0.02 10 0.01 0 1 10−5 10−4 10−3 10−2 10−1 1 10 102 103 t p (s) FR4 PCB, mounting pad for collector 1 cm2 Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values PBSS2515E_2 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 02 — 21 April 2009 4 of 12 PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 7. Characteristics Table 7. Characteristics Tamb = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit ICBO collector-base cut-off current VCB = 15 V; IE = 0 A - - 100 nA VCB = 15 V; IE = 0 A; Tj = 150 °C - - 50 µA - - 100 nA IEBO emitter-base cut-off current VEB = 5 V; IC = 0 A hFE DC current gain VCE = 2 V; IC = 10 mA VCEsat collector-emitter saturation voltage 200 - - VCE = 2 V; IC = 100 mA [1] 150 - - VCE = 2 V; IC = 500 mA [1] 90 - - - - 25 mV IC = 10 mA; IB = 0.5 mA - - 150 mV IC = 500 mA; IB = 50 mA IC = 200 mA; IB = 10 mA [1] - - 250 mV - 300 500 mΩ RCEsat collector-emitter saturation resistance IC = 500 mA; IB = 50 mA [1] VBEsat base-emitter saturation IC = 500 mA; IB = 50 mA voltage [1] - - 1.1 V VBEon base-emitter turn-on voltage VCE = 2 V; IC = 100 mA [1] - - 0.9 V VCC = 11 V; IC = 250 mA; IBon = 12.5 mA; IBoff = −12.5 mA - 10 - ns - 15 - ns - 25 - ns - 215 - ns td delay time tr rise time ton turn-on time ts storage time tf fall time - 34 - ns toff turn-off time - 249 - ns fT transition frequency VCE = 5 V; IC = 100 mA; f = 100 MHz 250 420 - MHz Cc collector capacitance VCB = 10 V; IE = ie = 0 A; f = 1 MHz - 4.4 6 pF [1] Pulse test: tp ≤ 300 µs; δ ≤ 0.02. PBSS2515E_2 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 02 — 21 April 2009 5 of 12 PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 006aaa364 800 006aaa370 1.2 IB = 5.0 mA hFE (1) 600 4.5 4.0 3.5 3.0 IC (A) 0.8 2.5 (2) 2.0 400 1.5 0.4 (3) 1.0 200 0.5 0 10−1 1 10 102 0 103 0 1 2 3 4 IC (mA) 5 VCE (V) Tamb = 25 °C VCE = 2 V (1) Tamb = 100 °C (2) Tamb = 25 °C (3) Tamb = −55 °C Fig 4. DC current gain as a function of collector current; typical values Fig 5. 006aaa365 1100 VBE (mV) Collector current as a function of collector-emitter voltage; typical values 006aaa368 1.3 VBEsat (V) 900 (1) 0.9 (1) 700 (2) (2) 500 (3) (3) 0.5 300 100 10−1 1 10 102 0.1 10−1 103 1 IC (mA) VCE = 2 V IC/IB = 20 (1) Tamb = −55 °C (1) Tamb = −55 °C (2) Tamb = 25 °C (3) Tamb = 100 °C (3) Tamb = 100 °C Base-emitter voltage as a function of collector current; typical values Fig 7. 103 Base-emitter saturation voltage as a function of collector current; typical values PBSS2515E_2 Product data sheet 102 IC (mA) (2) Tamb = 25 °C Fig 6. 10 © NXP B.V. 2009. All rights reserved. Rev. 02 — 21 April 2009 6 of 12 PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 006aaa366 1 VCEsat (V) 006aaa367 1 VCEsat (V) 10−1 10−1 (1) (1) (2) (3) 10−2 (2) 10−2 (3) 10−3 10−1 1 10 102 103 10−3 10−1 1 10 102 IC (mA) Tamb = 25 °C IC/IB = 20 (1) Tamb = 100 °C (1) IC/IB = 100 (2) Tamb = 25 °C (2) IC/IB = 50 (3) Tamb = −55 °C (3) IC/IB = 10 Fig 8. 103 IC (mA) Collector-emitter saturation voltage as a function of collector current; typical values 006aaa369 102 Fig 9. Collector-emitter saturation voltage as a function of collector current; typical values 006aaa371 103 RCEsat (Ω) RCEsat (Ω) 102 10 (1) 10 (2) (1) (2) (3) 1 10−1 10−1 1 10 102 (3) 1 103 10−1 10−1 1 IC (mA) 102 103 IC (mA) Tamb = 25 °C IC/IB = 20 (1) Tamb = 100 °C (1) IC/IB = 100 (2) Tamb = 25 °C (2) IC/IB = 50 (3) Tamb = −55 °C (3) IC/IB = 10 Fig 10. Collector-emitter saturation resistance as a function of collector current; typical values Fig 11. Collector-emitter saturation resistance as a function of collector current; typical values PBSS2515E_2 Product data sheet 10 © NXP B.V. 2009. All rights reserved. Rev. 02 — 21 April 2009 7 of 12 PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 8. Test information IB input pulse (idealized waveform) 90 % IBon (100 %) 10 % IBoff output pulse (idealized waveform) IC 90 % IC (100 %) 10 % t td ts tr ton tf toff 006aaa003 Fig 12. BISS transistor switching time definition VBB RB VCC RC Vo (probe) oscilloscope 450 Ω (probe) 450 Ω oscilloscope R2 VI DUT R1 mlb826 VCC = 11 V; IC = 250 mA; IBon = 12.5 mA; IBoff = −12.5 mA Fig 13. Test circuit for switching times PBSS2515E_2 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 02 — 21 April 2009 8 of 12 PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 9. Package outline 0.95 0.60 1.8 1.4 3 0.45 0.15 1.75 0.9 1.45 0.7 1 2 0.30 0.15 0.25 0.10 1 Dimensions in mm 04-11-04 Fig 14. Package outline SOT416 (SC-75) 10. Packing information Table 8. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number PBSS2515E [1] Package SOT416 Description Packing quantity 4 mm pitch, 8 mm tape and reel 3000 10000 -115 -135 For further information and the availability of packing methods, see Section 14. 11. Soldering 2.2 1.7 solder lands solder resist 1 0.85 2 solder paste 0.5 (3×) occupied area Dimensions in mm 0.6 (3×) 1.3 sot416_fr Fig 15. Reflow soldering footprint SOT416 (SC-75) PBSS2515E_2 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 02 — 21 April 2009 9 of 12 PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 12. Revision history Table 9. Revision history Document ID Release date Data sheet status Change notice Supersedes PBSS2515E_2 20090421 Product data sheet - PBSS2515E_1 Modifications: PBSS2515E_1 • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. • • • • • • Legal texts have been adapted to the new company name where appropriate. Figure 2: added Table 6 “Thermal characteristics”: enhanced Table 7 “Characteristics”: switching times added Figure 8 and 9: amended Section 13 “Legal information”: updated 20050418 Product data sheet PBSS2515E_2 Product data sheet - - © NXP B.V. 2009. All rights reserved. Rev. 02 — 21 April 2009 10 of 12 PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 13. Legal information 13.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 13.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 13.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. 13.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] PBSS2515E_2 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 02 — 21 April 2009 11 of 12 PBSS2515E NXP Semiconductors 15 V, 0.5 A NPN low VCEsat (BISS) transistor 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Packing information. . . . . . . . . . . . . . . . . . . . . . 9 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information. . . . . . . . . . . . . . . . . . . . . 11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 21 April 2009 Document identifier: PBSS2515E_2