Data Sheet

PBSS4021NZ
20 V, 8 A NPN low VCEsat (BISS) transistor
Rev. 01 — 31 March 2010
Product data sheet
1. Product profile
1.1 General description
NPN low VCEsat Breakthrough In Small Signal (BISS) transistor in a SOT223 (SC-73)
medium power Surface-Mounted Device (SMD) plastic package.
PNP complement: PBSS4021PZ.
1.2 Features and benefits
„
„
„
„
„
„
Very low collector-emitter saturation voltage VCEsat
High collector current capability IC and ICM
High collector current gain (hFE) at high IC
High energy efficiency due to less heat generation
AEC-Q101 qualified
Smaller required Printed-Circuit Board (PCB) area than for conventional transistors
1.3 Applications
„
„
„
„
„
Loadswitch
Battery-driven devices
Power management
Charging circuits
Power switches (e.g. motors, fans)
1.4 Quick reference data
Table 1.
Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VCEO
collector-emitter voltage
open base
-
-
20
V
IC
collector current
-
-
8
A
ICM
peak collector current
single pulse;
tp ≤ 1 ms
-
-
20
A
RCEsat
collector-emitter
saturation resistance
IC = 6 A;
IB = 600 mA
-
14
20
mΩ
[1]
Pulse test: tp ≤ 300 μs; δ ≤ 0.02.
[1]
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
1
base
2
collector
3
emitter
4
collector
Simplified outline
Graphic symbol
4
2, 4
1
1
2
3
3
sym016
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
PBSS4021NZ
SC-73
plastic surface-mounted package with increased
heat sink; 4 leads
SOT223
4. Marking
Table 4.
Marking codes
Type number
Marking code
PBSS4021NZ
PB4021NZ
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
PBSS4021NZ_1
Product data sheet
Symbol
Parameter
Conditions
Min
Max
Unit
VCBO
collector-base voltage
open emitter
-
20
V
VCEO
collector-emitter voltage
open base
-
20
V
VEBO
emitter-base voltage
open collector
-
5
V
IC
collector current
-
8
A
ICM
peak collector current
-
20
A
IB
base current
-
1
A
single pulse;
tp ≤ 1 ms
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
2 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
Table 5.
Limiting values …continued
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Ptot
Parameter
Conditions
total power dissipation
Tamb ≤ 25 °C
Min
Max
Unit
[1]
-
770
mW
[2]
-
1700
mW
[3]
-
2600
mW
Tj
junction temperature
-
150
°C
Tamb
ambient temperature
−55
+150
°C
Tstg
storage temperature
−65
+150
°C
[1]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2]
Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 6 cm2.
[3]
Device mounted on a ceramic PCB, Al2O3, standard footprint.
006aac060
3.0
(1)
Ptot
(W)
2.0
(2)
1.0
0
−75
(3)
−25
25
75
125
175
Tamb (°C)
(1) Ceramic PCB, Al2O3, standard footprint
(2) FR4 PCB, mounting pad for collector 6 cm2
(3) FR4 PCB, standard footprint
Fig 1.
PBSS4021NZ_1
Product data sheet
Power derating curves
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
3 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
6. Thermal characteristics
Table 6.
Thermal characteristics
Symbol
Parameter
Conditions
thermal resistance from
junction to ambient
Rth(j-a)
in free air
Min
Typ
Max
Unit
[1]
-
-
160
K/W
[2]
-
-
75
K/W
[3]
-
-
50
K/W
-
-
11
K/W
thermal resistance from
junction to solder point
Rth(j-sp)
[1]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2]
Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 6 cm2.
[3]
Device mounted on a ceramic PCB, Al2O3, standard footprint.
006aac061
103
Zth(j-a)
(K/W)
duty cycle = 1
0.75
102
0.5
0.33
0.2
0.1
10
0.05
0.02
0.01
1
0
10−1
10−5
10−4
10−3
10−2
10−1
1
10
102
103
tp (s)
FR4 PCB, standard footprint
Fig 2.
Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
PBSS4021NZ_1
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
4 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
006aac062
103
Zth(j-a)
(K/W)
102
duty cycle = 1
0.75
0.5
0.33
0.2
10
0.1
0.05
0.02
1
0.01
0
10−1
10−5
10−4
10−3
10−2
10−1
1
10
102
103
tp (s)
FR4 PCB, mounting pad for collector 6 cm2
Fig 3.
Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
006aac063
102
duty cycle = 1
Zth(j-a)
(K/W)
0.75
0.50
0.33
10
0.20
0.10
0.05
0.02
1
0.01
0
10−1
10−5
10−4
10−3
10−2
10−1
1
10
102
103
tp (s)
Ceramic PCB, Al2O3, standard footprint
Fig 4.
Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
PBSS4021NZ_1
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
5 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
7. Characteristics
Table 7.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol Parameter
Min
Typ
Max
Unit
collector-base cut-off VCB = 20 V; IE = 0 A
current
VCB = 20 V; IE = 0 A;
Tj = 150 °C
-
-
100
nA
-
-
50
μA
ICES
collector-emitter
cut-off current
VCE = 16 V; VBE = 0 V
-
-
100
nA
IEBO
emitter-base cut-off
current
VEB = 5 V; IC = 0 A
-
-
100
nA
hFE
DC current gain
VCE = 2 V; IC = 500 mA
300
550
-
VCE = 2 V; IC = 1 A
300
550
-
VCE = 2 V; IC = 2 A
300
500
-
VCE = 2 V; IC = 4 A
250
450
-
250
400
-
IC = 1 A; IB = 50 mA
-
18
30
mV
IC = 1 A; IB = 10 mA
-
27
40
mV
IC = 2 A; IB = 40 mA
-
37
55
mV
IC = 4 A; IB = 200 mA
-
60
85
mV
IC = 4 A; IB = 40 mA
-
75
105
mV
ICBO
Conditions
[1]
VCE = 2 V; IC = 8 A
VCEsat
collector-emitter
saturation voltage
[1]
IC = 8 A; IB = 400 mA
Product data sheet
120
170
mV
-
14
20
mΩ
RCEsat
collector-emitter
IC = 6 A; IB = 600 mA
saturation resistance
VBEsat
base-emitter
saturation voltage
IC = 1 A; IB = 100 mA
[1]
-
0.84
0.9
V
IC = 4 A; IB = 400 mA
[1]
-
0.98
1.05
V
[1]
-
0.72
0.85
V
-
60
-
ns
-
40
-
ns
-
100
-
ns
VBEon
base-emitter turn-on
voltage
VCE = 2 V; IC = 2 A
td
delay time
tr
rise time
ton
turn-on time
VCC = 12.5 V; IC = 1 A;
IBon = 0.05 A;
IBoff = −0.05 A
ts
storage time
-
780
-
ns
tf
fall time
-
80
-
ns
toff
turn-off time
-
860
-
ns
fT
transition frequency
-
95
-
MHz
Cc
collector capacitance VCB = 10 V; IE = ie = 0 A;
f = 1 MHz
-
110
-
pF
[1]
PBSS4021NZ_1
[1]
VCE = 10 V;
IC = 100 mA;
f = 100 MHz
Pulse test: tp ≤ 300 μs; δ ≤ 0.02.
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
6 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
006aac064
1000
hFE
006aac065
25.0
IC
(A)
(1)
800
IB (mA) = 70
20.0
63
56
49
(2)
600
15.0
400
10.0
42
35
28
21
(3)
14
200
7
5.0
0
10−1
1
10
102
103
0.0
0.0
104
105
IC (mA)
1.0
2.0
3.0
4.0
5.0
VCE (V)
Tamb = 25 °C
VCE = 2 V
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −55 °C
Fig 5.
DC current gain as a function of collector
current; typical values
Fig 6.
006aac066
1.2
VBE
(V)
Collector current as a function of
collector-emitter voltage; typical values
006aac067
1.4
VBEsat
(V)
0.8
1.0
(1)
(1)
(2)
(2)
0.4
0.6
(3)
(3)
0.0
10−1
1
10
102
103
0.2
10−1
104
105
IC (mA)
1
VCE = 2 V
IC/IB = 20
(1) Tamb = −55 °C
(1) Tamb = −55 °C
(2) Tamb = 25 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
(3) Tamb = 100 °C
Fig 7.
Base-emitter voltage as a function of collector
current; typical values
PBSS4021NZ_1
Product data sheet
Fig 8.
10
102
103
104
105
IC (A)
Base-emitter saturation voltage as a function
of collector current; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
7 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
006aac068
1
006aac069
1
VCEsat
(V)
VCEsat
(V)
10−1
10−1
(1)
(2)
(1)
10−2
(3)
(2)
10−2
10−3
(3)
10−3
10−1
1
10
102
103
104
105
IC (mA)
10−4
10−1
1
102
103
104
105
IC (mA)
Tamb = 25 °C
IC/IB = 20
(1) Tamb = 100 °C
(1) IC/IB = 100
(2) Tamb = 25 °C
(2) IC/IB = 50
(3) Tamb = −55 °C
(3) IC/IB = 10
Fig 9.
10
Collector-emitter saturation voltage as a
function of collector current; typical values
006aac070
102
Fig 10. Collector-emitter saturation voltage as a
function of collector current; typical values
006aac071
103
RCEsat
(Ω)
RCEsat
(Ω)
102
10
10
(1)
1
1
(2)
(1)
10−1
(2)
10−1
(3)
10−2
10−1
1
10
102
103
104
105
IC (mA)
(3)
10−2
10−1
1
(1) Tamb = 100 °C
(1) IC/IB = 100
(2) Tamb = 25 °C
(2) IC/IB = 50
(3) Tamb = −55 °C
(3) IC/IB = 10
Fig 11. Collector-emitter saturation resistance as a
function of collector current; typical values
Product data sheet
102
103
104
105
IC (mA)
Tamb = 25 °C
IC/IB = 20
PBSS4021NZ_1
10
Fig 12. Collector-emitter saturation resistance as a
function of collector current; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
8 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
8. Test information
IB
input pulse
(idealized waveform)
90 %
IBon (100 %)
10 %
IBoff
output pulse
(idealized waveform)
IC
90 %
IC (100 %)
10 %
t
td
ts
tr
ton
tf
toff
006aaa003
Fig 13. BISS transistor switching time definition
VBB
RB
VCC
RC
Vo
(probe)
oscilloscope
450 Ω
(probe)
450 Ω
oscilloscope
R2
VI
DUT
R1
mlb826
Fig 14. Test circuit for switching times
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
PBSS4021NZ_1
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
9 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
9. Package outline
6.7
6.3
3.1
2.9
1.8
1.5
4
1.1
0.7
7.3
6.7
3.7
3.3
1
2
3
2.3
4.6
0.8
0.6
Dimensions in mm
0.32
0.22
04-11-10
Fig 15. Package outline SOT223 (SC-73)
10. Packing information
Table 8.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number
PBSS4021NZ
[1]
PBSS4021NZ_1
Product data sheet
Package Description
SOT223
8 mm pitch, 12 mm tape and reel
Packing quantity
1000
4000
-115
-135
For further information and the availability of packing methods, see Section 14.
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
10 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
11. Soldering
7
3.85
3.6
3.5
0.3
1.3 1.2
(4×) (4×)
solder lands
4
solder resist
3.9
6.1 7.65
solder paste
occupied area
1
2
3
Dimensions in mm
2.3
2.3
1.2
(3×)
1.3
(3×)
6.15
sot223_fr
Fig 16. Reflow soldering footprint SOT223 (SC-73)
8.9
6.7
1.9
solder lands
4
solder resist
6.2
8.7
occupied area
Dimensions in mm
1
2
3
1.9
(3×)
2.7
preferred transport
direction during soldering
2.7
1.1
1.9
(2×)
sot223_fw
Fig 17. Wave soldering footprint SOT223 (SC-73)
PBSS4021NZ_1
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
11 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
12. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
PBSS4021NZ_1
20100331
Product data sheet
-
-
PBSS4021NZ_1
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
12 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
PBSS4021NZ_1
Product data sheet
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on a weakness or default in the
customer application/use or the application/use of customer’s third party
customer(s) (hereinafter both referred to as “Application”). It is customer’s
sole responsibility to check whether the NXP Semiconductors product is
suitable and fit for the Application planned. Customer has to do all necessary
testing for the Application in order to avoid a default of the Application and the
product. NXP Semiconductors does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
13 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
PBSS4021NZ_1
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 01 — 31 March 2010
© NXP B.V. 2010. All rights reserved.
14 of 15
PBSS4021NZ
NXP Semiconductors
20 V, 8 A NPN low VCEsat (BISS) transistor
15. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
8.1
9
10
11
12
13
13.1
13.2
13.3
13.4
14
15
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 4
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 9
Quality information . . . . . . . . . . . . . . . . . . . . . . 9
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Packing information . . . . . . . . . . . . . . . . . . . . 10
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12
Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Contact information. . . . . . . . . . . . . . . . . . . . . 14
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 31 March 2010
Document identifier: PBSS4021NZ_1