CX11VSM CRYSTAL 32 kHz to 180 kHz Surface Mount Quartz Crystal DESCRIPTION Designed and manufactured in the USA, Statek’s CX11VSM tuning-fork quartz crystal has an extremely small footprint (3.2 mm x 1.5 mm) and a very low profile (under 1 mm). For applications where space or mass are a premium, the small size and low mass of the CX11VSM make it the ideal choice. glass lid ceramic lid PACKAGE DIMENSIONS FEATURES Ultra-miniature Low profile (less than 1 mm) Low mass (12 mg for SM1 with ceramic lid) Surface mount Available with ceramic or glass lid High shock and vibration survival Excellent aging characteristics TYPICAL inches mm 0.127 3.20 0.060 1.50 0.027 0.69 Ideal for low power applications Full military testing available Designed and manufactured in the USA APPLICATIONS DIM A B C D Medical MAXIMUM inches mm 0.135 3.43 0.068 1.73 see below 0.037 0.94 CRM Termination Typical inches mm Ceramic THICKNESS (DIM C) Lid SM1 0.030 0.77 0.035 0.90 SM2/SM4 0.031 0.79 0.036 0.92 SM3/SM5 0.033 0.84 0.038 0.97 SM1 0.029 0.74 0.034 0.87 SM2/SM4 0.030 0.77 0.035 0.89 SM3/SM5 0.032 0.81 0.037 0.94 SM1 0.025 0.64 0.030 0.77 SM2/SM4 0.026 0.66 0.031 0.79 SM3/SM5 0.028 0.71 0.033 0.84 Infusion pumps Diabetes Control Glass SUGGESTED LAND PATTERN Thin Glass 0.138 (3.50) 0.126 (3.20) 0.099 (2.51) 0.059 0.071 (1.50) (1.80) 0.039 (0.99) TERMINATIONS Designation SM1 SM2 SM3 SM4 SM5 Termination Gold Plated Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) 10174 Rev B IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com YS 90 01 TEM C ERT I F I C AT N IO S Inches (mm) Maximum inches mm CONVENTIONAL CMOS PIERCE OSCILLATOR CIRCUIT SPECIFICATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Rf Fundamental Frequency Motional Resistance R1 32.768 kHz 50 k! 50 kHz 40 k! 100 kHz 20 k! Motional Capacitance C1 3.5 fF 1.4 fF 1.0 fF Quality Factor Q 25,000 55,000 70,000 Shunt Capacitance C0 1.0 pF 0.8 pF 0.8 pF Load Capacitance1 9 pF 9 pF 9 pF 12 mg 12 mg 12 mg Mass (SM1, ceramic lid) BUFFER CG Temperature Characterization 2 Turnover Temperature T0 25 C 3 17 C O O CD CX11 18 C O Frequency - Temperature Constant k OSC Freq (fO ) RA AMPLIFIER EQUIVALENT CIRCUIT -0.035 ppm/OC2 Standard Calibration Tolerance4 C0 ± 20 ppm ±100 ppm 1 Drive Level 0.5 µW MAX Aging, first year 3 ppm MAX Shock, survival 5,000 g, 0.3 ms, 1/2 sine Vibration, survival 20 g, 10-2,000 Hz swept sine Operating Temp. Range -10OC to +70OC (Commercial) Storage Temp. Range Max Process Temperature -40 C to +85 C (Industrial) -55OC to +125OC (Military) -55OC to +125OC 260OC for 20 sec. O L1 C1 R1 2 R1 Motional Resistance L 1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance PACKAGING OPTIONS O • Tray Pack • 12 mm tape, 7”or 13” reels Per EIA 481 (see Tape and Reel data sheet 10109) 1. Other load capacitances available. 2. The crystal frequency f as a function of temperature T follows the parabolic relationship f (T) = f (T0) [1 + k (T - T0)2], where T0 is the turnover temperature and k is the frequency-temperature constant. 3. Other turnover temperatures available. 4. Tighter tolerances available. HOW TO ORDER CX11VSM CRYSTALS CX11V S C SM1 – “S” if special or custom design. Blank if Std. Blank = Glass Lid T = Thin Glass Lid C = Ceramic Lid SM1 = Gold Plated (Lead Free) SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated (Lead Free) SM5 = Solder Dipped (Lead Free) 32.768K Frequency K = kHz , 100 Calibration Tolerance @ 250C (in ppm) / I , Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified 9pF Load Capacitance (Customer Specified) Note: Crystals with SM1, SM4 or SM5 terminations are Pb-free. Crystals with SM2 or SM3 terminations contain Pb. IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com 90 01 TEM C ERT I F I C AT N IO S 10174 Rev B YS