134 RLP 5 Datasheet

134 RLP 5
www.vishay.com
Vishay BCcomponents
Aluminum Electrolytic Capacitors
Radial Low Profile, 5 mm
FEATURES
• Useful life: 1500 h at 85 °C
• Very low profile, 5 mm height
• Extremely miniaturized
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Radial leads, cylindrical aluminum case, insulated with a
blue sleeve
• Charge and discharge proof
038 RSU
097 RLP 7
higher
CV-values
134 RLP 5
5 mm
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
longer life
SMD
153 CRV
APPLICATIONS
Fig. 1
• General purpose, industrial, automotive and audio-video
• Coupling, decoupling, smoothing, filtering and timing
• High mounting density
QUICK REFERENCE DATA
DESCRIPTION
• Portable and mobile equipment (very small size and very
low mass), low profile equipment
VALUE
Nominal case sizes (Ø D x L in mm)
Rated capacitance range, CR
Tolerance on CR
4 x 5 to 6.3 x 5
1.0 μF to 100 μF
MARKING
± 20 %
Rated voltage range, UR
The capacitors are marked (where possible) with the
following information:
6.3 V to 50 V
Category temperature range
-40 °C to +85 °C
Endurance test at 85 °C
1000 h
Useful life at 85 °C
1500 h
Useful life at 40 °C, 1.4 x IR applied
Shelf life at 0 V, 85 °C
• Rated capacitance (in μF)
• Rated voltage (in V)
• Negative terminal identification
40 000 h
• Code indicating factory of origin
500 h
Based on sectional specification
Climatic category IEC 60068
• Name of manufacturer
IEC 60384-4 / EN 130300
• Date code, in accordance with IEC 60062
40/085/56
• Series number (134)
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
UR (V)
CR
(μF)
6.3
10
16
25
35
50
1.0
-
-
-
-
-
4x5
2.2
-
-
-
-
-
4x5
3.3
-
-
-
-
-
4x5
4.7
-
-
-
-
4x5
5x5
10
-
-
4x5
-
5x5
6.3 x 5
22
4x5
-
5x5
-
6.3 x 5
-
33
-
5x5
-
6.3 x 5
-
-
47
5x5
-
6.3 x 5
-
-
-
100
6.3 x 5
-
-
-
-
-
Revision: 26-Apr-16
Document Number: 28307
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
134 RLP 5
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
ØD
L
+
F
± 0.5
15
min
5
min
Ød
Case Ø D = 4 mm to 6.3 mm; pitch F = 5 mm
Fig. 2 - Form CA: Long leads
Fig. 3 - Form TFA: Taped in box (ammopack)
Pitch F = 2.5 mm
Case Ø D = 4 mm to 6.3 mm
Fig. 4 - Form TNA: Taped in box (ammopack)
Table 1
DIMENSIONS in millimeters AND PACKAGING QUANTITIES
PACKAGING QUANTITIES
NOMINAL CASE SIZE
ØDxL
CASE
CODE
Ød
Ø Dmax.
Lmax.
F
FORM
CA
FORM
TFA
FORM
TNA
4x5
53
0.45
4.5
6.0
1.5 ± 0.5
2000
2000
2000
5x5
54
0.45
5.5
6.0
2.0 ± 0.5
2000
2000
2000
6.3 x 5
55
0.45
6.8
6.0
2.5 ± 0.5
2000
2000
2 000
Note
• For detailed tape dimensions please see www.vishay.com/doc?28360
Revision: 26-Apr-16
Document Number: 28307
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
134 RLP 5
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
Electrolytic capacitor 134 series
SYMBOL
DESCRIPTION
CR
Rated capacitance at 120 Hz, tolerance ± 20 %
22 μF/16 V; ± 20 %
IR
Rated RMS ripple current at 120 Hz, 85 °C
Nominal case size: Ø 5 mm x 5 mm; form TFA
Max. leakage current after 2 min at UR
Ordering code: MAL213435229E3
Max. dissipation factor at 120 Hz
Former 12NC: 2222 134 35229
IL2
tan 
Z
Max. impedance at 100 kHz
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
IR
120 Hz
85 °C
(mA)
IL2
2 min
(μA)
22
4x5
23
3
0.24
11
53229E3
1.5
33229E3
5.0
73229E3
2.5
47
5x5
38
3
0.24
5.2
53479E3
2.0
33479E3
5.0
73479E3
2.5
100
6.3 x 5
60
7
0.24
3.4
53101E3
2.5
33101E3
5.0
73101E3
2.5
33
5x5
35
4
0.20
6.0
54339E3
2.0
34339E3
5.0
74339E3
2.5
10
4x5
20
3
0.16
12
95105E3
1.5
95103E3
5.0
95107E3
2.5
CR
120 Hz
(μF)
6.3
10
16
25
35
50
ORDERING CODE
MAL2134.......
NOMINAL
CASE SIZE
ØDxL
(mm)
tan 
120 Hz
Z
100 kHz
()
BULK
LONG LEADS
FORM
CA
F
(mm)
TAPED
AMMOPACK
FORM
TFA
F
(mm)
FORM
TNA
F
(mm)
22
5x5
32
4
0.16
6.4
55229E3
2.0
35229E3
5.0
75229E3
2.5
47
6.3 x 5
50
8
0.16
4.2
55479E3
2.5
35479E3
5.0
75479E3
2.5
33
6.3 x 5
45
9
0.14
4.6
56339E3
2.5
36339E3
5.0
76339E3
2.5
4.7
4x5
15
3
0.12
27
50478E3
1.5
30478E3
5.0
70478E3
2.5
10
5x5
25
4
0.12
17
50109E3
2.0
30109E3
5.0
70109E3
2.5
22
6.3 x 5
40
8
0.12
11
50229E3
2.5
30229E3
5.0
70229E3
2.5
1.0
4x5
7.5
3
0.10
28
91105E3
1.5
91103E3
5.0
91107E3
2.5
2.2
4x5
12
3
0.10
26
91225E3
1.5
91223E3
5.0
91227E3
2.5
3.3
4x5
14
3
0.10
25
51338E3
1.5
31338E3
5.0
71338E3
2.5
4.7
5x5
19
3
0.10
22
51478E3
2.0
31478E3
5.0
71478E3
2.5
10
6.3 x 5
29
5
0.10
14
51109E3
2.5
31109E3
5.0
71109E3
2.5
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Voltage
Us  1.15 x UR
Surge voltage
Urev  1 V
Reverse voltage
Current
Leakage current
After 2 min at UR
IL2  0.01 CR x UR or 3 μA (whichever is greater)
Calculated from tan max. and CR (see Table 3)
ESR = tan /2  f CR
Resistance
Equivalent series resistance (ESR)
Revision: 26-Apr-16
Document Number: 28307
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
134 RLP 5
www.vishay.com
Vishay BCcomponents
RIPPLE CURRENT AND USEFUL LIFE
CCC205
3.3
IA
3.2
IR
3.1
3.0
2.8
2.6
2.4
Lifetime multiplier
2.2
0
1.
5
1.
2.0
0
2.
0
3.
1.8
0
4.
6
1.6
.0
10
1.4
15
30
70
40
(1)
(1)
50
IA = Actual ripple current at 120 Hz
IR = Rated ripple current at 120 Hz, 85 °C
20
1.2
1.0
0.8
0.5
0.0
50
60
70
80
90
100
Tamb (°C)
Useful life at 85 °C and IR applied: 1500 h
Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 3
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
IR MULTIPLIER
50
0.60
120
1.00
400
1.20
800
1.30
 2000
1.40
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Endurance
REFERENCE
IEC 60384-4 /
EN 130300,
subclause 4.13
PROCEDURE
(quick reference)
REQUIREMENTS
Tamb = 85 °C; UR applied;
1000 h
C/C: ± 20 %
tan  2 x spec. limit
IL2  spec. limit
Useful life
CECC 30301,
subclause 1.8.1
Tamb = 85 °C; UR and IR applied;
1500 h
C/C: ± 50 %
tan  3 x spec. limit
Z  3 x spec. limit
IL2  spec. limit
no short or open circuit
total failure percentage:  3 %
Shelf life
(storage at high
temperature)
IEC 60384-4 /
EN 130300,
subclause 4.17
Tamb = 85 °C; no voltage applied;
500 h
After test: UR to be applied for 30 min, 24 h to 48 h
before measurement
C/C, tan , Z:
For requirements 
see “Endurance test” above
IL2  spec. limit
Revision: 26-Apr-16
Document Number: 28307
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000