097 RLP 7 Datasheet

097 RLP 7
www.vishay.com
Vishay BCcomponents
Aluminum Electrolytic Capacitors
Radial Low Profile, 7 mm
FEATURES
•
•
•
•
038 RSU
Fig.0 Component
097 RLP 7 outlines.
higher
CV-values
7 mm
lower height
5 mm
134 RLP 5
Fig. 1
APPLICATIONS
•
•
•
•
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Nominal case sizes (Ø D x L in mm)
4 x 7 to 6.3 x 7
Rated capacitance range, CR
General purpose; industrial, automotive and audio-video
Low surface demand on printed-circuit board
Coupling, decoupling, smoothing, filtering and timing
Portable and mobile equipment (small size, low mass), 
low profile equipment
0.1 μF to 220 μF
Tolerance on CR
MARKING
± 20 %
Rated voltage, UR
6.3 V to 63 V
Category temperature range
-40 °C to +85 °C
Endurance test at 85 °C
1000 h
Useful life at 85 °C
1500 h
Useful life at 40 °C, 1.4 x IR applied
40 000 h
Shelf life at 0 V, 85 °C
500 h
Based on sectional specification
Useful life: 1500 h at 85 °C
Low profile, 7 mm height
Miniaturized, high CV-product per unit volume
Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Radial leads, cylindrical aluminum case, insulated with
a blue sleeve
• Charge and discharge proof
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
IEC 60384-4 / EN 130300
Climatic category IEC 60068
40/085/56
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Rated voltage (in V)
• Negative terminal identification
• Code indicating factory of origin
• Name of manufacturer
• Date code, in accordance with IEC 60062
• Series number (097)
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
UR (V)
CR
(μF)
6.3
10
16
25
35
50
63
0.10
-
-
-
-
-
-
4x7
0.22
-
-
-
-
-
-
4x7
0.47
-
-
-
-
-
-
4x7
1.0
-
-
-
-
-
-
4x7
2.2
-
-
-
-
-
-
4x7
3.3
-
-
-
-
-
4x7
5x7
4.7
-
-
-
-
4x7
5x7
6.3 x 7
10
-
-
4x7
-
5x7
6.3 x 7
6.3 x 7
22
4x7
-
5x7
-
6.3 x 7
6.3 x 7
-
33
-
5x7
-
6.3 x 7
6.3 x 7
-
-
47
5x7
-
6.3 x 7
6.3 x 7
-
-
-
100
-
6.3 x 7
6.3 x 7
-
-
-
-
220
6.3 x 7
-
-
-
-
-
-
Revision: 26-Apr-16
Document Number: 28308
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
097 RLP 7
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
ØD
+
F
± 0.5
15
min.
5
min.
Ød
Fig. 2 - Form CA: Long leads
Fig. 3 - Form TFA: Taped in box (ammopack),
formed leads, pitch F = 5 mm
Fig. 4 - Form TNA: Taped in box (ammopack), pitch F = 2.5 mm
DIMENSIONS in millimeters AND PACKAGING QUANTITIES
PACKAGING QUANTITIES
NOMINAL CASE SIZE
ØDxL
CASE
CODE
Ød
4x7
71
5x7
6.3 x 7
Ø Dmax.
Lmax.
F
0.45
4.5
8
72
0.45
5.5
73
0.45
6.8
FORM CA
FORM TFA
FORM TNA
1.5 ± 0.5
2000
2000
2000
8
2.0 ± 0.5
1000
2000
2000
8
2.5 ± 0.5
1000
2000
2000
Note
• For detailed tape dimensions please see www.vishay.com/doc?28360
Revision: 26-Apr-16
Document Number: 28308
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
097 RLP 7
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
Electrolytic capacitor 097 series
DESCRIPTION
CR
Rated capacitance at 120 Hz, tolerance ± 20 %
100 μF/16 V; ± 20 %
IR
Rated RMS ripple current at 120 Hz, 85 °C
Nominal case size: Ø 6.3 mm x 7 mm; form TFA
Max. leakage current after 2 min at UR
Ordering code: MAL209735101E6
Former 12NC: 2222 097 35101
IL2
tan 
Max. dissipation factor at 120 Hz
Z
Max. impedance at 100 kHz
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
ELECTRICAL DATA AND ORDERING INFORMATION
ORDERING CODE MAL2097.......
UR
(V)
6.3
10
16
25
35
50
63
CR
120 Hz
(μF)
NOMINAL
CASE SIZE
ØDxL
(mm)
IR
120 Hz
85 °C
(mA)
IL2
2 min
(μA)
tan 
120 Hz
22
4x7
31
3
0.24
Z
100 kHz
()
8.4
BULK
LONG LEADS
TAPED AMMOPACK
FORM
CA
F
(mm)
FORM
TFA
F
(mm)
FORM
TNA
F
(mm)
53229E6
1.5
33229E6
5.0
73229E6
2.5
47
5x7
47
3
0.24
4.6
53479E6
2.0
33479E6
5.0
73479E6
2.5
220
6.3 x 7
90
14
0.24
1.8
53221E6
2.5
33221E6
5.0
73221E6
2.5
33
5x7
43
4
0.20
3.7
54339E6
2.0
34339E6
5.0
74339E6
2.5
100
6.3 x 7
80
10
0.20
2.2
54101E6
2.5
34101E6
5.0
74101E6
2.5
10
4x7
25
3
0.16
10.0
55109E6
1.5
35109E6
5.0
75109E6
2.5
22
5x7
39
4
0.16
5.0
55229E6
2.0
35229E6
5.0
75229E6
2.5
47
6.3 x 7
59
8
0.16
3.5
55479E6
2.5
35479E6
5.0
75479E6
2.5
100
6.3 x 7
90
16
0.16
2.5
55101E6
2.5
35101E6
5.0
75101E6
2.5
33
6.3 x 7
53
9
0.14
2.6
56339E6
2.5
36339E6
5.0
76339E6
2.5
47
6.3 x 7
65
12
0.14
1.9
56479E6
2.5
36479E6
5.0
76479E6
2.5
4.7
4x7
20
3
0.12
10.0
50478E6
1.5
30478E6
5.0
70478E6
2.5
10
5x7
30
4
0.12
5.6
50109E6
2.0
30109E6
5.0
70109E6
2.5
22
6.3 x 7
47
8
0.12
3.0
50229E6
2.5
30229E6
5.0
70229E6
2.5
33
6.3 x 7
60
12
0.12
2.6
50339E6
2.5
30339E6
5.0
70339E6
2.5
3.3
4x7
18
3
0.10
14.0
51338E6
1.5
31338E6
5.0
71338E6
2.5
4.7
5x7
23
3
0.10
10.0
51478E6
2.0
31478E6
5.0
71478E6
2.5
10
6.3 x 7
34
5
0.10
5.5
51109E6
2.5
31109E6
5.0
71109E6
2.5
22
6.3 x 7
53
11
0.10
2.9
51229E6
2.5
31229E6
5.0
71229E6
2.5
0.10
4x7
1.3
3
0.08
170.0
58107E6
1.5
38107E6
5.0
78107E6
2.5
0.22
4x7
2.9
3
0.08
110.0
58227E6
1.5
38227E6
5.0
78227E6
2.5
0.47
4x7
7.9
3
0.08
66.0
58477E6
1.5
38477E6
5.0
78477E6
2.5
1.0
4x7
11
3
0.08
36.0
58108E6
1.5
38108E6
5.0
78108E6
2.5
2.2
4x7
17
3
0.08
19.0
58228E6
1.5
38228E6
5.0
78228E6
2.5
3.3
5x7
21
3
0.08
14.0
58338E6
2.0
38338E6
5.0
78338E6
2.5
4.7
6.3 x 7
26
3
0.08
10.0
58478E6
2.5
38478E6
5.0
78478E6
2.5
10
6.3 x 7
40
7
0.08
5.5
58109E6
2.5
38109E6
5.0
78109E6
2.5
Revision: 26-Apr-16
Document Number: 28308
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
097 RLP 7
www.vishay.com
Vishay BCcomponents
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Voltage
Us  1.15 x UR
Surge voltage
Urev  1 V
Reverse voltage
Current
After 2 min at UR
IL2  0.01 CR x UR or 3 μA (whichever is greater)
Calculated from tan max. and CR (see Table 2)
ESR = tan /2 f CR
Leakage current
Resistance
Equivalent series resistance (ESR)
RIPPLE CURRENT AND USEFUL LIFE
CCC205
3.3
IA
3.2
IR
3.1
3.0
2.8
2.6
2.4
Lifetime multiplier
2.2
0
1.
5
1.
2.0
0
2.
0
3.
1.8
0
4.
6
1.6
.0
15
20
30
70
40
(1)
(1)
50
IA = Actual ripple current at 120 Hz
IR = Rated ripple current at 120 Hz, 85 °C
1.2
1.0
0.8
0.5
0.0
10
1.4
50
60
70
80
90
100
Tamb (°C)
Useful life at 85 °C and IR applied: 1500 h
Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 1
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
Revision: 26-Apr-16
FREQUENCY (Hz)
IR MULTIPLIER
50
0.60
120
1.00
400
1.20
800
1.30
2000
1.40
Document Number: 28308
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
097 RLP 7
www.vishay.com
Vishay BCcomponents
Table 2
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Endurance
REFERENCE
IEC 60384-4 /
EN 130 300,
subclause 4.13
PROCEDURE
(quick reference)
REQUIREMENTS
Tamb = 85 °C, UR applied;
1000 h
C/C: ± 20 %
tan  2 x spec. limit
IL2  spec. limit
Useful life
CECC 30301,
subclause 1.8.1
Tamb = 85 °C, UR and IR applied;
1500 h
C/C: ± 50 %
tan  3 x spec. limit
Z  3 x spec. limit
IL2  spec. limit
no short or open circuit
total failure percentage: 3 %
Shelf life
(storage at high
temperature)
IEC 60384-4 /
EN 130300,
subclause 4.17
Tamb = 85 °C; no voltage applied;
500 h
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
C/C, tan , Z:
For requirements see 
“Endurance test” above
IL2  spec. limit
Revision: 26-Apr-16
Document Number: 28308
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000