152 RMH Datasheet

152 RMH
www.vishay.com
Vishay BCcomponents
Aluminum Electrolytic Capacitors
Radial Miniature, High Voltage
FEATURES
152 RMH
low
voltage
• Long useful life: 3000 h to 4000 h at 105 °C
• AEC-Q200 qualified
• Miniaturized, ultra high CV-product per unit
volume
• High reliability
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Radial leads, cylindrical aluminum case,
insulated with a blue sleeve
• Pressure relief
• Charge and discharge proof
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
148 RUS
Fig. 1
APPLICATIONS
QUICK REFERENCE DATA
DESCRIPTION
Nominal case sizes (Ø D x L in mm)
Rated capacitance range, CR
Tolerance on CR
Rated voltage range, UR
Category temperature range
Endurance test at 105 °C
Useful life at 105 °C:
Case Ø D = 10 mm and 12.5 mm
Case Ø D = 16 mm and 18 mm
Useful life at 40 °C, 1.6 x IR applied:
Case Ø D = 10 mm and 12.5 mm
Case Ø D = 16 mm and 18 mm
Shelf life at 0 V, 105 °C
Based on sectional specification
Climatic category IEC 60068
VALUE
10 x 12 to 18 x 35
1.5 μF to 220 μF
± 20 %
200 V to 450 V
-40 °C to +105 °C
2000 h
3000 h
4000 h
200 000 h
260 000 h
1000 h
IEC 60384-4/EN 130300
40/105/56
• Automotive
• High-reliability and professional applications
• Lighting, monitors, consumer electronics,
industrial
• Filtering of high voltages in power supplies
general
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance value (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code, in accordance with IEC 60062
• Code indicating factory of origin
• Name of manufacturer
• Upper category temperature (105 °C)
• Negative terminal identification
• Series number (152)
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
1.5
2.2
4.7
6.8
10
22
33
47
68
100
220
Revision: 26-Apr-16
UR (V)
200
10 x 12
10 x 16
10 x 20
12.5 x 20
12.5 x 25
16 x 20
16 x 35
250
10 x 16
12.5 x 20
12.5 x 20
12.5 x 25
16 x 20
16 x 25
-
400
10 x 12
10 x 16
10 x 12
10 x 16
10 x 20
12.5 x 25
16 x 20
16 x 20
16 x 25
16 x 35
18 x 35
-
450
10 x 12
10 x 16
10 x 20
12.5 x 20
12.5 x 20
16 x 25
18 x 20
16 x 35
18 x 25
18 x 35
-
Document Number: 28320
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
152 RMH
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
4+1
-0
L
Ød
+
+
F
ØD
F
ØD
-
5
min
L
Ød
15
min
Fig. 2 - Form CA: Long leads
Fig. 3 - Form CB: Cut leads
Fig. 4 - Form TFA: Taped in box (ammopack)
Table 1
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
PACKAGING QUANTITIES
NOMINAL
CASE SIZE
ØDxL
CASE
CODE
Ød
Ø Dmax.
Lmax.
F
MASS
(g)
10 x 12
14
0.6
10.5
13.5
5.0 ± 0.5
10 x 16
15
0.6
10.5
17.5
10 x 20
16
0.6
10.5
12.5 x 20
17
0.6
12.5 x 25
18
16 x 20
FORM
CA
FORM
CB
FORM
TFA
 1.6
1000
500
800
5.0 ± 0.5
 1.9
500
500
800
22.0
5.0 ± 0.5
 2.2
500
500
800
13.0
22.0
5.0 ± 0.5
 4.0
500
500
500
0.6
13.0
27.0
5.0 ± 0.5
 5.0
250
250
500
19a
0.8
16.5
22.0
7.5 ± 0.5
 6.0
250
250
250
16 x 25
19
0.8
16.5
27.0
7.5 ± 0.5
 8.0
250
250
250
16 x 35
21
0.8
16.5
37.5
7.5 ± 0.5
 11.0
100
100
-
18 x 20
1820
0.8
18.5
22.0
7.5 ± 0.5
 8.0
100
100
-
18 x 25
1825
0.8
18.5
27.0
7.5 ± 0.5
 10.0
100
100
-
18 x 35
22
0.8
18.5
37.5
7.5 ± 0.5
 14.5
100
100
-
Note
• For detailed tape dimensions please see www.vishay.com/doc?28360
Revision: 26-Apr-16
Document Number: 28320
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
152 RMH
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
Electrolytic capacitor 152 series
DESCRIPTION
CR
Rated capacitance at 100 Hz, tolerance ± 20 %
4.7 μF/400 V; ± 20 %
IR
Rated RMS ripple current at 100 Hz, 105 °C
Nominal case size: Ø 10 mm x 16 mm; form TFA
Max. leakage current after 1 min at UR
Ordering code: MAL215236478E3
Former 12NC: 2222 152 36478
IL1
tan 
Max. dissipation factor at 100 Hz
Z
Max. impedance at 10 kHz
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
200
250
400
450
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
ØDxL
(mm)
IR
100 Hz
105 °C
(mA)
IL1
1 min
(μA)
tan 
100 Hz
10
10 x 12
85
130
22
10 x 16
120
33
10 x 20
150
47
12.5 x 20
68
100
ORDERING CODE MAL2152 .......
Z
10 kHz
()
FORM CA
FORM CB
FORM TFA
0.12
6.3
52109E3
62109E3
32109E3
202
0.12
3.2
52229E3
62229E3
32229E3
268
0.12
2.3
52339E3
62339E3
32339E3
240
352
0.12
0.9
52479E3
62479E3
32479E3
12.5 x 25
310
478
0.12
0.6
52689E3
62689E3
32689E3
16 x 20
340
670
0.12
0.4
52101E3
62101E3
32101E3
BULK PACKAGING
TAPED
220
16 x 35
630
1390
0.12
0.2
52221E3
62221E3
-
10
10 x 16
105
145
0.12
6.3
53109E3
63109E3
33109E3
22
12.5 x 20
180
235
0.12
2.3
53229E3
63229E3
33229E3
33
12.5 x 20
180
318
0.12
1.5
53339E3
63339E3
33339E3
47
12.5 x 25
310
423
0.12
0.9
53479E3
63479E3
33479E3
47
16 x 20
310
423
0.12
0.9
93475E3
93476E3
93473E3
100
16 x 25
340
820
0.12
0.4
53101E3
63101E3
33101E3
2.2
10 x 12
44
96
0.15
28.0
56228E3
66228E3
36228E3
4.7
10 x 12
48
127
0.15
24.0
96475E3
96476E3
96473E3
4.7
10 x 16
65
126
0.15
18.0
56478E3
66478E3
36478E3
6.8
10 x 16
65
152
0.15
12.0
56688E3
66688E3
36688E3
36109E3
10
10 x 20
80
190
0.15
9.0
56109E3
66109E3
22
12.5 x 25
150
334
0.15
3.8
56229E3
66229E3
36229E3
22
16 x 20
150
334
0.15
3.8
96225E3
96226E3
96223E3
33
16 x 20
190
466
0.15
2.6
56339E3
66339E3
36339E3
47
16 x 25
240
634
0.15
2.0
56479E3
66479E3
36479E3
68
16 x 35
310
886
0.15
1.7
56689E3
66689E3
-
100
18 x 35
380
1270
0.15
0.9
56101E3
66101E3
-
1.5
10 x 12
30
90
0.20
26.0
57158E3
67158E3
37158E3
2.2
10 x 16
50
99
0.20
26.0
57228E3
67228E3
37228E3
4.7
10 x 20
65
133
0.20
20.0
57478E3
67478E3
37478E3
6.8
12.5 x 20
80
162
0.20
16.0
57688E3
67688E3
37688E3
10
12.5 x 20
90
205
0.20
10.0
57109E3
67109E3
37109E3
22
16 x 25
150
367
0.20
4.6
57229E3
67229E3
37229E3
22
18 x 20
150
367
0.20
4.6
97225E3
97226E3
-
33
16 x 35
200
516
0.20
3.4
57339E3
67339E3
-
33
18 x 25
200
516
0.20
3.4
97335E3
97336E3
-
47
18 x 35
260
705
0.20
2.0
57479E3
67479E3
-
Revision: 26-Apr-16
Document Number: 28320
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
152 RMH
www.vishay.com
Vishay BCcomponents
ADDITIONAL ELECTRICAL DATA
PARAMETER
Voltage
CONDITIONS
VALUE
UR = 200 V to 250 V
UR = 400 V to 450 V
Us 1.15 x UR
Us 1.10 x UR
Urev 1 V
After 1 min at UR
After 5 min at UR
IL1  0.03 CR x UR + 70 μA
IL5  0.015 CR x UR + 30 μA
Case Ø D = 10 mm
Case Ø D  12.5 mm
Typ. 16 nH
Typ. 18 nH
Calculated from tan max. and CR (see Table 2)
ESR = tan /2f CR
Surge voltage
Reverse voltage
Current
Leakage current
Inductance
Equivalent series inductance (ESL)
Resistance
Equivalent series resistance (ESR)
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY
(Hz)
50
100
300
1000
3000
10 000
 100 000
IR MULTIPLIER
UR  250 V
0.75
1.00
1.50
2.00
2.20
2.50
3.00
UR > 250 V
0.75
1.00
1.30
1.60
1.90
2.20
2.50
RIPPLE CURRENT AND USEFUL LIFE
CCC206
3.8
IA 3.7
IR 3.6
3.5
3.4
3.3
3.2
3.1
3.0
2.8
Lifetime multiplier
2.6
0
1.
2.4
5
1.
0
2.
2.2
0
3.
0
4.
2.0
0
6.
0
8.
1.8
20
60
1.4
1.2
1.0
0.8
0.5
0.0
(1)
0
10 0
15 0
20
Useful life at 105 °C and IR applied
Case Ø D = 10 mm and 12.5 mm: 3000 h
Case Ø D = 16 mm and 18 mm: 4000 h
1.6
30
(1)
12
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz, 105 °C
40
50
60
70
80
90
100
110
Tamb (°C)
Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load
Revision: 26-Apr-16
Document Number: 28320
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
152 RMH
www.vishay.com
Vishay BCcomponents
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Endurance
REFERENCE
IEC 60384-4 /
EN 130300
subclause 4.13
PROCEDURE
(quick reference)
REQUIREMENTS
Tamb = 105 °C; UR applied;
2000 h
C/C: ± 20 %
tan   2 x spec. limit
Z  2 x spec. limit
IL5  spec. limit
Useful life
CECC 30301
subclause 1.8.1
Tamb = 105 °C; UR and IR applied;
Case Ø D = 10 mm and 12.5 mm: 3000 h
Case Ø D = 16 mm and 18 mm: 4000 h
C/C: ± 50 %
tan   3 x spec. limit
Z  3 x spec. limit
IL5  spec. limit
no short or open circuit
total failure percentage:  1 %
Shelf life
(storage at high
temperature)
IEC 60384-4 /
EN 130300
subclause 4.17
Tamb = 105 °C; no voltage applied;
1000 h
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
C/C: ± 20 %
tan   2 x spec. limit
Z  2 x spec. limit
IL5  2 x spec. limit
Reverse voltage
IEC 60384-4 /
EN 130300
subclause 4.15
Tamb = 105 °C:
125 h at U = -1 V,
followed by 125 h at UR
C/C: ± 15 %
IL5  spec. limit
tan   spec. limit
Revision: 26-Apr-16
Document Number: 28320
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000