Datenblatt

CX3HSM CRYSTAL
18 kHz to 600 kHz
Low Profile Surface Mount
Quartz Crystal for Series Oscillators
DESCRIPTION
The CX3HSM quartz crystals are leadless devices
designed for surface mounting on printed circuit boards
or hybrid substrates. These miniature crystals are
intended to be used in Series oscillators. They are
hermetically sealed in a rugged, miniature ceramic
package. They are manufactured using the STATEKdeveloped photolithographic process, and were designed
utilizing the experience acquired by producing millions of
crystals for industrial, commercial, military and medical
applications. Maximum process temperature should not
exceed 260O C.
actual size
side view
Glass Lid Shown
PACKAGE DIMENSIONS
D
TOP
A
BOTTOM
D
FEATURES
Miniature tuning fork design
D
High shock resistance
E
B
Designed for low power applications
C
TYP.
Compatible with hybrid or PC board packaging
MAX.
DIM
inches
mm
inches
mm
A
0.263
6.68
0.270
6.86
Full military testing available
B
0.097
2.46
0.104
2.64
Designed and manufactured in the USA
C
-
-
D
0.052
1.32
0.058
1.47
E
0.030
0.76
0.035
0.89
Low aging
EQUIVALENT CIRCUIT
DIM “C“”
C0
1
L1
C1
R1
2
R1 Motional Resistance L1 Motional Inductance
C1 Motional Capacitance C0 Shunt Capacitance
see below
GLASS LID
CERAMIC LID
MAX
inches
mm
inches
mm
SM1
0.053
1.35
0.067
1.70
SM2/SM4
0.055
1.40
0.069
1.75
SM3/SM5
0.058
1.47
0.072
1.83
CONVENTIONAL SERIES
OSCILLATOR CIRCUIT
Rf
SUGGESTED LAND PATTERN
0.070 (1.78)
OSCILLATOR
0.110 (2.79)
CX3H XTAL
CA
RA
BUFFER
Contact factory for
design guidelines
RB
inches (mm)
0.210 (5.33)
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
10146 - Rev E
FIGURE 1
CX3H TYPICAL MOTIONAL RESISTANCE (R1)
1. Other calibration values available, consult factory.
2. Other turning point available.
3. Higher shock and vibration available.
1000
R1(k!)
500
Frequency Range (kHz)
10
170-249.9
250-600
30 ppm
(0.003%)
50 ppm
(0.005%)
+
_
+
_
+
_
+
_
+
_
+
_
100 ppm
(0.01%)
+
_
100 ppm
(0.01%)
100 ppm
(0.01%)
+
_
1000 ppm
(0.1%)
1000 ppm
(0.1%)
+
_
2000 ppm
(0.2%)
500 ppm
(0.05%)
+
_
5000 ppm
(0.5%)
PACKAGING OPTIONS
CX3HSM - Tray Pack
- Tape and Reel
(Reference tape and reel data sheet 10109)
S
C
SM1
Blank = Glass Lid
C = Ceramic Lid
“S” if special or
custom design.
Blank if Std.
32.0K
,
Frequency
K = kHz
SM1 = Gold Plated
SM2 = Solder Plated
SM3 = Solder Dipped
SM4 = Solder Plated (Lead Free)
SM5 = Solder Dipped (Lead Free)
30
/
I
Calibration Operating Temp. Range:
Tolerance C = -10OC to +70OC
@ 25OC
I = -40OC to +85OC
(in ppm) M = -55OC to +125OC
S = Customer Specified
200
600
1.0
18
50
100
200
Frequency (kHz)
600
FIGURE 3
CX3H TYPICAL QUALITY FACTOR (Q)
50
20
10
5
2
18
50
100
200
Frequency (kHz)
600
FIGURE 4
CX3H TYPICAL TURNING POINT TEMP. (T0)
+80
+70
+60
+50
+40
+30
+20
+10
0
-10
-20
18
50
100
200
Frequency (kHz)
600
Note: Frequency f at temperature T is related to frequency f0 at
turning point temperature T0 by:
f-f0 = k(T-T )2
0
f0
HOW TO ORDER CX3HSM CRYSTALS
CX3H
100
Frequency (kHz)
2
0.5
200 ppm
(0.02%)
200 ppm
(0.02%)
50
5
O
+
_
+
_
18
FIGURE 2
CX3H TYPICAL MOTIONAL CAPACITANCE (C1)
TO( C)
75-169.9
100
20
CX3H Standard Calibration Tolerance at 25OC
18-74.9
200
50
C1(fF)
Specifications are typical at 25OC unless otherwise noted.
Specifications are subject to change without notice.
Frequency Range
18 kHz to 600 kHz
Functional Mode
Tuning Fork (Flexure)
Standard Calibration Tolerance1 (see table below)
Motional Resistance (R1)
See Figure 1
MAX: 18-25 kHz, 2x Typ.
25-600 kHz, 2.5x Typ.
Motional Capacitance (C1) Figure 2
Quality Factor (Q)
Figure 3
MIN is 0.25x Typ.
1.8 pF MAX.
Shunt Capacitance (C0)
Drive Level
18-24.9 kHz 0.5 µW MAX.
25-600 kHz 1.0 µW MAX.
Turning Point (T0)2
Figure 4
Temperature Coefficient (k) -0.035 ppm/0C2
Aging, first year
5 ppm MAX
3
Shock, survival
1,500 g, 0.3 ms, 1/2 sine
Vibration, survival3
10 g RMS, 20-2,000 Hz random
Operating Temp. Range
-10OC to +70OC (Commercial)
-40OC to +85OC (Industrial)
-55OC to +125OC (Military)
Storage Temp. Range
-55OC to +125OC
Max Process Temperature 260OC for 20 sec.
(in 1000's)
SPECIFICATIONS
TERMINATIONS
Designation
SM1
SM2
SM3
SM4
SM5
Termination
Gold Plated
Solder Plated
Solder Dipped
Solder Plated (Lead Free)
Solder Dipped (Lead Free)
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
10146 - Rev E