Product Specification

LANGUAGE
PRODUCT SPECIFICATION
JAPANESE
ENGLISH
【１．適用範囲 SCOPE】
本仕様書は、
殿 に納入する。
1.0 mm ピッチ FPC / FFC用コネクタ について規定する。
This specification covers the 1.0mm PITCH FPC / FFC CONNECTOR series.
【２．製品名称及び型番 PRODUCT NAME AND PART NUMBER】
製 品 名 称
Product Name
製 品 型 番
Material Number
ハウジングアッセンブリ
Housing Assembly
無鉛
LEAD FREE
５２８０８－＊＊１９
５２８０８－＊＊１９テーピング梱包
Embossed Tape Package For 52808-**19
無鉛
LEAD FREE
５２８０８－＊＊７０
ハウジングアッセンブリ
Housing Assembly
無鉛
LEAD FREE
５２８０８－＊＊２９
５２８０８－＊＊２９テーピング梱包
Embossed Tape Package For 52808-**29
無鉛
LEAD FREE
５２８０８－＊＊７１
＊ ：図面参照
Refer to the drawings.
【３．定格 RATINGS 】
項
目
規
Item
格
Standard
最大許容電圧
Rated Voltage(MAXIMUM)
125 V
[AC (実効値 rms) /DC]
最大許容電流
Rated Current (MAXIMUM)
0.5 A
使用温度範囲
Ambient Temperature Range
＊1：通電による温度上昇分を含む。
Including terminal temperature rise.
A
B
C
SHEET
1~9
1~10
1～9
REVISE ON PC ONLY
*1
-20℃ ～ +80℃
REV.
TITLE:
1.0mm PITCH FPC / FFC CONN. NON ZIF ST.
変更
REVISED
J2015-0830
C
2015/02/06
N.ASANUMA
REV.
DESCRIPTION
DESIGN CONTROL
STATUS
J
DOCUMENT NUMBER
PS-52808-004
-LEAD FREE-
製品仕様書
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
WRITTEN
BY:
N.AIDA
CHECKED
BY:
APPROVED
BY:
K.TOJO
M.SASAO
DATE: YR/MO/DAY
FILE NAME
SHEET
1 OF 10
EN-037(2013-04 rev.1)
.PS52808004.docx
LANGUAGE
PRODUCT SPECIFICATION
【４．性
JAPANESE
ENGLISH
能 PERFORMANCE】
４－１．電気的性能 Electrical Performance
項目
Item
接 触 抵 抗
Contact
Resistance
4-1-1
4-1-2
絶 縁 抵 抗
Insulation
Resistance
4-1-3
耐 電 圧
Dielectric
Strength
条件
Test Condition
規格
Requirement
適合FPC/FFCを嵌合させ、開放電圧 20mV 以下、
短絡電流 10mA にて測定する。
(JIS C5402 5.4)
Mate applicable FPC/FFC and measure by dry
circuit , 20mV MAXIMUM, 10mA .
(JIS C5402 5.4)
30 milliohms MAXIMUM
適合FPC/FFCを嵌合させ、隣接するターミナル間
及びターミナル、アース間に、DC 500Vを印加し
測定する。
(JIS C5402 5.2/MIL-STD-202 試験法 302)
Mate applicable FPC/FFC and apply 500V DC
between adjacent terminal and ground.
(JIS C5402 5.2/MIL-STD-202 Method 302)
適合FPC/FFCを嵌合させ、隣接するターミナル間及
びターミナル、アース間に、AC 500V（実効値）を
1分間印加する。
(JIS C5402 5.1/MIL-STD-202 試験法 301)
Mate applicable FPC/FFC and apply 500V
AC(rms) for 1 minute between adjacent terminal or
ground.
(JIS C5402 5.1/MIL-STD-202 Method 301)
100 Megohms MINIMUM
異状なきこと
No Breakdown
４－２. 機械的性能 Mechanical Performance
項目
Item
条件
Test Condition
4-2-1
挿入力及び抜去力
Insertion /
Withdrawal Force
適合FFCを用いて、毎分25±3mmの速さで挿入、
抜去を行う。
Insert and withdraw the applicable FFC to the
connector at the speed rate of 25 ± 3 mm per
minute.
4-2-2
ターミナル保持力
Terminal /
Housing
Rtention Force
ターミナルを毎分25±3 mmの速さで引っ張る。
Apply axial pull out force at the speed rate of 25±3
mm per minute on the terminal assembled in the
housing.
REVISE ON PC ONLY
規格
Requirement
第6項参照
Refer to paragraph 6
5.9N {0.6kgf}
MINIMUM
TITLE:
1.0 mm PITCH FPC / FFC CONN. NON ZIF ST.
C
SEE SHEET 1 OF 10
REV.
DESCRIPTION
-LEAD FREE-
製品仕様書
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DOCUMENT NUMBER
FILE NAME
SHEET
PS-52808-004
PS52808004.docx
2 OF 10
EN-037(2013-04 rev.1)
LANGUAGE
PRODUCT SPECIFICATION
４－３．そ
の
他 Environmental Performance and Others
項目
Item
4-3-1
繰り返し挿抜
Repeated
Insertion /
Withdrawal
4-3-2
温 度 上 昇
Temperature
Rise
耐 振 動 性
Vibration
4-3-3
耐 衝 撃 性
Shock
4-3-4
JAPANESE
ENGLISH
条件
Test Condition
1分間に10回以下の速さで挿入、抜去を10回繰り
返す。
When mated up to 10 cycles repeatedly by the
rate of 10 cycles per minute.
適合FPC/FFCを嵌合させ、最大許容総電流を通
電し、コネクタの温度上昇分を測定する。
(UL 498)
Mate connectors and measure the temperature
rise of contact when the maximum AC rated
current is passed.
(UL 498)
DC 1mA 通電状態にて、嵌合軸を含む互いに垂
直な3方向に掃引割合 10～55～10 Hz/分、全振
幅 1.5mm の振動を各 2時間 加える。
(MIL-STD-202試験法 201)
Mate connectors and subject to the following
vibration conditions, for a period of 2 hours in
each of 3 mutually perpendicular axes,
passing DC 1 mA during the test.
Amplitude : 1.5 mm P-P
Frequency : 10-55-10 Hz
shall be traversed in 1 minute.
(MIL-STD-202, Method 201)
DC 1mA 通電状態にて、嵌合軸を含む互いに垂
2
直な 6方向に 490m/s {50G} の衝撃を各3回加
える。
(JIS C0041 / MIL-STD-202試験法 213)
Mate connectors and subject to the following
shock conditions. 3 times of shocks shall be
applied for each 6 directions along 3 mutually
perpendicular axes, passing DC 1 mA current
during the test.(Total of 18 shocks)
2
Peak value : 490 m/s (50 G)
(JIS C0041/MIL-STD-202 Method 213
REVISE ON PC ONLY
規格
Requirement
接触抵抗
Contact
Resistance
50 milliohms
MAXIMUM
温度上昇
Temperature
Rise
30 °C
MAXIMUM
外
観
Appearance
異状なきこと
No Damage
接触抵抗
Contact
Resistance
50 milliohms
MAXIMUM
瞬
断
Discontinuity
1.0
microsecond
MAXIMUM
外
観
Appearance
異状なきこと
No Damage
接触抵抗
Contact
Resistance
50 milliohms
MAXIMUM
瞬
断
Discontinuity
1.0
microsecond
MAXIMUM
TITLE:
1.0 mm PITCH FPC / FFC CONN. NON ZIF ST.
C
SEE SHEET 1 OF 10
REV.
DESCRIPTION
-LEAD FREE-
製品仕様書
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DOCUMENT NUMBER
FILE NAME
SHEET
PS-52808-004
PS52808004.docx
3 OF 10
EN-037(2013-04 rev.1)
LANGUAGE
PRODUCT SPECIFICATION
項目
Item
耐 熱 性
Heat Resistance
4-3-5
耐 寒 性
Cold Resistance
4-3-6
耐 湿 性
Humidity
4-3-7
JAPANESE
ENGLISH
条件
Test Condition
適合FPC/FFCを嵌合させ、85±2℃の雰囲気中に
96時間放置後取り出し、1～2時間室温に放置す
る。
( JIS C0021/MIL-STD-202 試験法 108 )
Mate FPC/FFC and expose to 85±2℃for 96
hours. Upon completion of the exposure period,
the test specimens shall be conditioned at
ambient room conditions for 1 to 2 hours, after
which the specified measurements shall be
performed.
( JIS C0021/MIL-STD-202 Method 108)
適合FPC/FFCを嵌合させ、-40±2℃の雰囲気中に
96時間放置後取り出し、1～2時間室温に放置す
る。
(JIS C0020)
Mate FPC/FFC and expose to –40±2℃ for 96
hours. Upon completion of the exposure
period,the test specimens shall be conditioned at
ambient room conditions for 1 to 2 hours, after
which the specified measurements shall be
performed.
(JIS C0020)
適合FPC/FFCを嵌合させ、40±2℃ 相対湿度 90
～95%の雰囲気中に96時間放置後取り出し、30
分以内に測定。水滴は拭き取る。
(JIS C0022/MIL-STD-202 試験方法103)
Mate FPC/FFC and expose to 40±2℃,relative
humidity 90 to 95% for 96 hours. Upon
completion of the exposure period, within 30
minutes which the specified measurements shall
be performed.
( JIS C0022/MIL-STD-202 Method 103 )
REVISE ON PC ONLY
規格
Requirement
外
観
Appearance
異状なきこと
No Damage
接触抵抗
Contact
Resistance
50 milliohms
MAXIMUM
外
観
Appearance
異状なきこと
No Damage
接触抵抗
Contact
Resistance
50 milliohms
MAXIMUM
外
観
Appearance
異状なきこと
No Damage
接触抵抗
Contact
Resistance
50 milliohms
MAXIMUM
耐 電 圧
Dielectric
Strength
4-1-3項 満足
のこと
Must meet
4-1-3
絶縁抵抗
Insulation
Resistance
50 Megohms
MINIMUM
TITLE:
1.0 mm PITCH FPC / FFC CONN. NON ZIF ST.
C
SEE SHEET 1 OF 10
REV.
DESCRIPTION
-LEAD FREE-
製品仕様書
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DOCUMENT NUMBER
FILE NAME
SHEET
PS-52808-004
PS52808004.docx
4 OF 10
EN-037(2013-04 rev.1)
LANGUAGE
PRODUCT SPECIFICATION
項目
Item
温度サイクル
Temperature
Cycling
4-3-8
塩 水 噴 霧
Salt Spray
4-3-9
亜硫酸ガス
SO2 Gas
4-3-10
耐アンモニア性
NH3 Gas
4-3-11
JAPANESE
ENGLISH
条件
Test Condition
適合FPC/FFCを嵌合させ、-55±3℃に30分、+85
±2℃に30分、これを1サイクルとし、5サイクル
繰り返す。但し、温度移行時間は3分以内とする。
試験後1～2時間室温に放置する。 (JIS C0025)
Mate connectors and subject to the following
conditions for 5 cycles. Upon completion of the
exposure period, the test specimens shall be
conditioned at ambient room conditions for 1 to 2
hours, after which the specified measurements
shall be performed.
1 cycle
a) –55±3℃ 30minutes
b) +85±2℃ 30minutes
(Transit time shall be with in 3 minutes)
(JIS C0025)
適合FPC/FFCを嵌合させ、35±2℃にて重量比 5
±1%の塩水を48±4時間噴霧し、試験後常温で
水洗いした後、室温で乾燥させる。
(JIS C0023/MIL-STD-202 試験方法101)
Mate connectors and expose to the following salt
mist condition. Upon completion of the exposure
period, salt deposits shall be removed by a
gentle wash or dip in running water, after which
the specified measurements shall be performed.
NaCl solution
Concentration
: 5±1%
Spray time
: 48±4 hours
Ambient temperature : 35±2℃
(JIS C0023/MIL-STD-202 Method 101)
適合FPC/FFCを嵌合させ、40±2℃にて50±
5ppmの亜硫酸ガス中に24時間放置する。
Mate FPC/FFC and expose them to the following
SO2 gas atmosphere.
Temperature
40±2℃
Gas Density
50±5ppm
Duration
24 hours
適合FPC/FFCを嵌合させ、濃度28%のアンモニ
ア水を入れた容器中に40分間放置する。
（1Lに対して25mLの割合）
Mate FPC/FFC and 40 minutes exposure to NH3
gas evaporating from 28% Ammonia solution.
REVISE ON PC ONLY
規格
Requirement
外
観
Appearance
異状なきこと
No Damage
接触抵抗
Contact
Resistance
50 milliohms
MAXIMUM
外
観
Appearance
異状なきこと
No Damage
接触抵抗
Contact
Resistance
50 milliohms
MAXIMUM
接触抵抗
Contact
Resistance
50 milliohms
MAXIMUM
外
観
Appearance
異状なきこと
No Damage
接触抵抗
Contact
Resistance
50 milliohms
MAXIMUM
TITLE:
1.0 mm PITCH FPC / FFC CONN. NON ZIF ST.
C
SEE SHEET 1 OF 10
REV.
DESCRIPTION
-LEAD FREE-
製品仕様書
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DOCUMENT NUMBER
FILE NAME
SHEET
PS-52808-004
PS52808004.docx
5 OF 10
EN-037(2013-04 rev.1)
LANGUAGE
PRODUCT SPECIFICATION
項目
Item
半田付け性
Solder Ability
4-3-12
半田耐熱性
Resistance to
Soldering Heat
4-3-13
JAPANESE
ENGLISH
条件
Test Condition
端子先端より1.5mm迄、245±5℃の半田に
3±0.5秒浸す。
Tip of solder tails into the molten solder
(held at 245±5℃) up to 1.5mm from the bottom
of the housing for 3±0.5 seconds.
（リフロー時）
When reflowing
第7項の条件にて、2回リフローを行う。
Refer to paragraph 7, two times.
（手半田）
Soldering iron method
端子先端より1.5mm迄、370～400℃の半田ゴテ
にて、最大5秒加熱する。
1.5mm from terminal tip.
Soldering time
: 5 seconds MAX.
Solder temperature : 370～400℃
規格
Requirement
浸漬面積の
75%以上
75% of
濡 れ 性
immersed
Solder
area must
Wetting
show no
voids, pin
holes.
外
観
Appearance
（
端子ガタ、
割れ等
異状無き事
No Damage
） ： 参考規格
Reference Standard
【５．外観形状、寸法及び材質 PRODUCT SHAPE, DIMENSIONS AND MATERIALS】
図面参照
Refer to the drawing.
REVISE ON PC ONLY
TITLE:
1.0 mm PITCH FPC / FFC CONN. NON ZIF ST.
C
SEE SHEET 1 OF 10
REV.
DESCRIPTION
-LEAD FREE-
製品仕様書
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DOCUMENT NUMBER
FILE NAME
SHEET
PS-52808-004
PS52808004.docx
6 OF 10
EN-037(2013-04 rev.1)
LANGUAGE
PRODUCT SPECIFICATION
JAPANESE
ENGLISH
【６．挿抜力及び抜去力 INSERTION / WITHDRAWAL FORCE】
下記のFFCを使用した場合 （参考） In case of used the following FFC (Reference)
厚さ ： 0.3mm
Thickness : 0.3mm
極 数
Number of
Circuit
単 位
UNIT
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
挿入力 （最大値）
Insertion Force (MAXIMUM)
初回
6回目
10回目
1st
6th
10th
11.2
14.2
14.2
(1.15)
(1.45)
(1.45)
12.7
15.6
15.6
(1.3)
(1.6)
(1.6)
14.2
17.1
17.1
(1.45)
(1.75)
(1.75)
15.6
18.6
18.6
(1.6)
(1.9)
(1.9)
17.1
20.0
20.0
(1.75)
(2.05)
(2.05)
18.6
21.5
21.5
(1.9)
(2.2)
(2.2)
20.0
23.0
23.0
(2.05)
(2.35)
(2.35)
21.5
24.5
24.5
(2.2)
(2.5)
(2.5)
23.0
25.9
25.9
(2.35)
(2.65)
(2.65)
24.5
27.4
27.4
(2.5)
(2.8)
(2.8)
25.9
28.9
28.9
(2.65)
(2.95)
(2.95)
27.4
30.3
30.3
(2.8)
(3.1)
(3.1)
28.9
31.8
31.8
(2.95)
(3.25)
(3.25)
30.3
33.3
33.3
(3.1)
(3.4)
(3.4)
31.8
34.7
34.7
(3.25)
(3.55)
(3.55)
33.3
36.2
36.2
(3.4)
(3.7)
(3.7)
34.7
37.7
37.7
(3.55)
(3.85)
(3.85)
36.2
39.2
39.2
(3.7)
(4.0)
(4.0)
37.7
40.6
40.6
(3.85)
(4.15)
(4.15)
REVISE ON PC ONLY
抜去力 （最小値）
Withdrawal Force (MINIMUM)
初回
6回目
10回目
1st
6th
10th
0.4
0.3
0.3
(0.04)
(0.03)
(0.03)
0.5
0.4
0.4
(0.05)
(0.04)
(0.04)
0.6
0.5
0.5
(0.06)
(0.05)
(0.05)
0.7
0.6
0.6
(0.07)
(0.06)
(0.06)
0.8
0.7
0.7
(0.08)
(0.07)
(0.07)
0.9
0.8
0.8
(0.09)
(0.08)
(0.08)
1.0
0.9
0.9
(0.1)
(0.09)
(0.09)
1.1
1.0
1.0
(0.11)
(0.1)
(0.1)
1.2
1.1
1.1
(0.12)
(0.11)
(0.11)
1.3
1.2
1.2
(0.13)
(0.12)
(0.12)
1.4
1.3
1.3
(0.14)
(0.13)
(0.13)
1.5
1.4
1.4
(0.15)
(0.14)
(0.14)
1.6
1.5
1.5
(0.16)
(0.15)
(0.15)
1.7
1.6
1.6
(0.17)
(0.16)
(0.16)
1.8
1.7
1.7
(0.18)
(0.17)
(0.17)
1.9
1.8
1.8
(0.19)
(0.18)
(0.18)
2.0
1.9
1.9
(0.2)
(0.19)
(0.19)
2.1
2.0
2.0
(0.21)
(0.2)
(0.2)
2.2
2.1
2.1
(0.22)
(0.21)
(0.21)
TITLE:
1.0 mm PITCH FPC / FFC CONN. NON ZIF ST.
C
SEE SHEET 1 OF 10
REV.
DESCRIPTION
-LEAD FREE-
製品仕様書
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DOCUMENT NUMBER
FILE NAME
SHEET
PS-52808-004
PS52808004.docx
7 OF 10
EN-037(2013-04 rev.1)
LANGUAGE
PRODUCT SPECIFICATION
極 数
Number of
Circuit
単 位
UNIT
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
N
(kgf)
23
24
25
26
27
28
29
30
JAPANESE
ENGLISH
挿入力 （最大値）
Insertion Force (MAXIMUM)
初回
6回目
10回目
1st
6th
10th
39.2
42.1
42.1
(4.0)
(4.3)
(4.3)
40.6
43.6
43.6
(4.15)
(4.45)
(4.45)
42.1
45.0
45.0
(4.3)
(4.6)
(4.6)
43.6
46.5
46.5
(4.45)
(4.75)
(4.75)
45.0
48.0
48.0
(4.6)
(4.9)
(4.9)
46.5
49.4
49.4
(4.75)
(5.05)
(5.05)
48.0
50.9
50.9
(4.9)
(5.2)
(5.2)
49.4
52.4
52.4
(5.05)
(5.35)
(5.35)
REVISE ON PC ONLY
抜去力 （最小値）
Withdrawal Force (MINIMUM)
初回
6回目
10回目
1st
6th
10th
2.3
2.2
2.2
(0.23)
(0.22)
(0.22)
2.4
2.3
2.3
(0.24)
(0.23)
(0.23)
2.5
2.4
2.4
(0.25)
(0.24)
(0.24)
2.6
2.5
2.5
(0.26)
(0.25)
(0.25)
2.7
2.6
2.6
(0.27)
(0.26)
(0.26)
2.8
2.7
2.7
(0.28)
(0.27)
(0.27)
2.9
2.8
2.8
(0.29)
(0.28)
(0.28)
3.0
2.9
2.9
(0.3)
(0.29)
(0.29)
TITLE:
1.0 mm PITCH FPC / FFC CONN. NON ZIF ST.
C
SEE SHEET 1 OF 10
REV.
DESCRIPTION
-LEAD FREE-
製品仕様書
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DOCUMENT NUMBER
FILE NAME
SHEET
PS-52808-004
PS52808004.docx
8 OF 10
EN-037(2013-04 rev.1)
LANGUAGE
PRODUCT SPECIFICATION
JAPANESE
ENGLISH
【７．赤外線リフロー条件 INFRARED REFLOW CONDITION】
+5
250 -0 ℃以下(ピーク温度)
+5
250 -0 ℃ MAX.(PEAK TEMP.)
20～40秒 (230℃以上)
20～40 sec. (230℃ MIN.)
90～120秒
90～120 sec.
(予熱：150～200℃)
(Pre-heat 150～200℃ )
温度条件グラフ
(温度は基板パターン面)
TEMPERATURE CONDITION GRAPH
(TEMPERATURE ON BOARD PATTERN SIDE)
注記 ： 本リフロー条件に関しては、リフロー装置及び基板などにより条件が
異なりますので、事前にリフロー評価の確認をお願いします。
NOTE : Please check the reflow soldering condition by your own devices beforehand.
Because the condition changes by the soldering devisces, p.c.boards, and so on.
REVISE ON PC ONLY
TITLE:
1.0 mm PITCH FPC / FFC CONN. NON ZIF ST.
C
SEE SHEET 1 OF 10
REV.
DESCRIPTION
-LEAD FREE-
製品仕様書
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DOCUMENT NUMBER
FILE NAME
SHEET
PS-52808-004
PS52808004.docx
9 OF 10
EN-037(2013-04 rev.1)
LANGUAGE
PRODUCT SPECIFICATION
JAPANESE
ENGLISH
REV.
REV. RECORD
DATE
ECN NO.
WRITTEN BY :
CHECKED BY :
A
RELEASED
2004/02/16
J2004-2426
N.AIDA
K.TOJO
B
REVISED
2013/07/25
J2013-0123
F.SATO
K.TAKAHASHI
C
REVISED
2015/02/06
J2015-0830
N.ASANUMA
K.TAKAHASHI
REVISE ON PC ONLY
TITLE:
1.0 mm PITCH FPC / FFC CONN. NON ZIF ST.
C
SEE SHEET 1 OF 10
REV.
DESCRIPTION
-LEAD FREE-
製品仕様書
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO
MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DOCUMENT NUMBER
FILE NAME
SHEET
PS-52808-004
PS52808004.docx
10 OF 10
EN-037(2013-04 rev.1)