042 AHH-ELB, 043 AHH-ELB Datasheet

042 AHH-ELB, 043 AHH-ELB
www.vishay.com
Vishay BCcomponents
Aluminum Electrolytic Capacitors
Axial High Temperature High Voltage for E.L.B.
FEATURES
041-043
ASH
042/043 AHH-ELB
550 V/24 h
standard
042/043 AMH-ELB
550 V/24 h
85 °C
Fig. 1
• Useful life: 10 000 h at 105 °C
• Stable under overvoltage conditions:
550 V for 24 h at 85 °C
• High ripple current capability
• Smallest dimensions
• Taped versions up to case Ø 15 mm x 30 mm available for
automatic insertion
• Polarized aluminum electrolytic capacitors, non-solid
electrolyte
• Axial leads, cylindrical aluminum case, insulated with a
blue sleeve
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Nominal case sizes (Ø D x L in mm)
12.5 x 30 to 18 x 38
• Electronic lighting ballast, power supply
• Smoothing, filtering, buffering at high voltages
• Boards with restricted mounting height, vibration, and
shock resistant
Rated capacitance range, CR
6.8 μF to 33 μF
MARKING
Tolerance on CR
-10 % to +50 %
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (T for -10 % to +50 %)
• Rated voltage (in V)
• Upper category temperature (105 °C)
• Date code, in accordance with IEC 60062
• Code for factory of origin
• Name of manufacturer
• Negative terminal identification
• Series number (042 or 043)
Rated voltage, UR
450 V
Category temperature range
-25 °C to +105 °C
Endurance test at 105 °C
5000 h
Useful life at 105 °C
10 000 h
Useful life at 85 °C IR applied
100 000 h
Shelf life at 0 V, 105 °C
500 h
Based on sectional specification
IEC 60384-4 / EN130300
Climatic category IEC 60068
25/105/56
DIMENSIONS in millimeters AND AVAILABLE FORMS
I
73 ± 1.6
ØD
L
33 ± 1
L
Ød
Ød
ØD
F
F
Form BR: Taped on reel
Case Ø D x L = 6.5 mm x 18 mm to 15 mm x 30 mm
Fig. 2 - Form BR
Revision: 26-Apr-16
Form AA: Axial in box
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
Fig. 3 - Form AA
Document Number: 28331
1
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
042 AHH-ELB, 043 AHH-ELB
www.vishay.com
Vishay BCcomponents
Table 1
AXIAL; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
AXIAL: FORM AA AND BR
NOMINAL
CASE SIZE
ØDxL
CASE
CODE
ØD
L
Ø Dmax.
Lmax.
Fmin.
MASS
(g)
12.5 x 30
15 x 30
18 x 30
18 x 38
01
02
03
04
0.8
0.8
0.8
0.8
55 ± 1
55 ± 1
55 ± 1
34 ± 1
13.0
15.5
18.5
18.5
30.5
30.5
30.5
39.5
35
35
35
44
6.1
8.3
11.6
 16.0
PACKAGING QUANTITIES
FORM
FORM
AA
BR
260
400
200
250
120
125
-
Note
• For detailed tape dimensions please refer to packaging information: www.vishay.com/doc?28361
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
CR
IR
IL5
ESR
Z
Electrolytic capacitor 042 series
DESCRIPTION
Rated capacitance at 100 Hz, 
tolerance -10 % to+50 %
Rated RMS ripple current at 10 kHz, 105 °C
Max. leakage current after 5 min at UR
Typ. / max. equivalent series resistance at 100 Hz
Typ. / max. impedance at 10 kHz
10 μF/450 V; -10 %/+50 %
Nominal case size: Ø 12.5 mm x 30 mm; Form BR
Ordering code: MAL204272109E3
Former 12NC: 2222 042 72109
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
ØDxL
(mm)
IR
10 kHz
105 °C
(mA)
IL5
5 min
(μA)
ESR
TYP.
100 Hz
()
ESR
MAX.
100 Hz
()
Z
TYP.
10 kHz
()
Z
MAX.
10 kHz
()
450
6.8
10
15
22
33
12.5 x 30
12.5 x 30
15 x 30
18 x 30
18 x 38
390
470
600
750
1020
106
110
115
120
130
4.2
2.9
1.9
1.2
0.9
8.7
5.9
3.9
2.5
1.8
3.1
2.0
1.3
1.0
0.7
5.1
3.3
2.3
1.5
1.1
ORDERING CODE MAL2..........
AXIAL
IN BOX
TAPED ON REEL
FORM AA
FORM BR
04271688E3
04272688E3
04271109E3
04272109E3
04271159E3
04272159E3
04271229E3
04371339E3
-
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
UR = 450 V
24 h at 85 °C
Us  550 V
550 V (1)
Urev  1 V
After 1 min
After 5 min
IL1  0.009 x CR x UR + 200 μA
IL5  0.002 x CR x UR + 100 μA
Case Ø D x L in mm:
12.5 x 30
15 x 30
18 x 30
18 x 38
Typ. 46 nH
Typ. 48 nH
Typ. 50 nH
Typ. 54 nH
Voltage
Surge voltage
Overvoltage test
Reverse voltage
Current
Leakage current
Inductance
Equivalent series inductance
Note
(1) Test conditions on request.
Revision: 26-Apr-16
Document Number: 28331
2
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
042 AHH-ELB, 043 AHH-ELB
www.vishay.com
Vishay BCcomponents
CAPACITANCE (C)
1.1
C
C0
1.0
0.9
0.8
0.7
- 40
- 20
0
20
40
60
80
100
120
Tamb (°C)
C0 = Capacitance at 20 °C, 100 Hz
Fig. 4 - Typical multiplier of capacitance as a function
of ambient temperature
EQUIVALENT SERIES RESISTANCE (ESR)
10 2
102
Curve 1: 100 Hz
Curve 2: 1 kHz
Curve 3: 10 kHz
ESR
ESR0
Curve 1: Tamb = 20 °C
Curve 2: Tamb = 40 °C
Curve 3: Tamb = 60 °C
Curve 4: Tamb = 85 °C
Curve 5: Tamb = 105 °C
ESR
ESR0
10
10
1
2
1
3
4
1
1
5
2
10
3
-1
- 40
- 20
0
20
40
60
80
100
-1
10
Tamb (°C)
ESR0 = Typical at 20 °C, 100 Hz
102
10
120
103
104
f (Hz)
105
ESR0 = Typical at 20 °C, 100 Hz
Fig. 5 - Typical multiplier of ESR as a function of
ambient temperature at different frequencies
Fig. 6 - Typical multiplier of ESR as a function of frequency
at different ambient temperatures
10 3
102
Curve 1: 10 µF,
Case Ø D x L = 12.5 mm x 30 mm
Curve 2: 15 µF,
Case Ø D x L = 15 mm x 30 mm
Curve 3: 22 µF,
Case Ø D x L = 18 mm x 30 mm
Curve 4: 33 µF,
Case Ø D x L = 18 mm x 38 mm
1
2
3
4
Z
(Ω)
10 2
10
10
1
1
10
10 −1
-1
- 40
- 20
0
20
Z0 = Impedance at 20 °C, 100 Hz
40
60
80
100
Tamb (°C)
Fig. 7 - Typical multiplier of impedance as a function
of ambient temperature
Revision: 26-Apr-16
120
10
10 2
10 3
10 4
105
6
f (Hz) 10
Tamb = 20 °C
Fig. 8 - Typical impedance as a function of frequency
Document Number: 28331
3
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
042 AHH-ELB, 043 AHH-ELB
www.vishay.com
Vishay BCcomponents
RIPPLE CURRENT AND USEFUL LIFE
CCC122
6
IA
IR
5
4
Lifetime multiplier
1.0
2.0
5.0
10
3
2
(1)
1
0
40
50
60
70
80
90
100
IA = Actual ripple current at 10 kHz
110
120
Tamb = 20 °C
IR = Rated ripple current at 10 kHz, 105 °C
(1)
Useful life at 105 °C and IR applied: 10 000 h
Fig. 9 - Multiplier of useful life as a function of ambient temperature
and ripple current load
Table 3
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY
(Hz)
50
100
300
1000
3000
10 000
IR MULTIPLIER
0.20
0.27
0.45
0.68
0.82
1.00
Note
• Formula (1) should be used to calculate the actual ripple current at 10 kHz (see Fig. 9) when multiple frequencies are present. For an example
of the values 100 Hz and 50 kHz:

I  100 Hz  2
I  50 kHz  2
(1)
I A =  --------------------------- +  ---------------------------
 0.27 


1.0
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
REFERENCE
PROCEDURE
(quick reference)
Endurance
IEC 60384-4 /
EN130300
subclause 4.13
Tamb = 105 °C; UR applied;
5000 h
Useful life
CECC 30301
subclause 1.8.1
Tamb = 105 °C; UR and IR applied;
10 000 h
Shelf life
(storage at high
temperature)
IEC 60384-4 /
EN130300
subclause 4.17
Tamb = 105 °C; no voltage applied;
500 h
After test: UR to be applied for 30 min, 
24 h to 48 h before measurement
Revision: 26-Apr-16
REQUIREMENTS
C/C: ± 10 %
tan  1.3 x spec. limit
Z  2 x spec. limit
IL5  spec. limit
C/C: ± 30 %
tan  3 x spec. limit
Z  3 x spec. limit
IL5  spec. limit
No short or open circuit
Total failure percentage:  3 %
C/C, tan , Z: 
For requirements
see ‘Endurance test’ above
IL5  2 x spec. limit
Document Number: 28331
4
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000