601D Datasheet

601D
www.vishay.com
Vishay Sprague
Aluminum Capacitors
+105 °C, Tubular, Axial Lead
FEATURES
• Temperature range -55 °C to +105 °C
• Long life
Available
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION
RIPPLE CURRENT MULTIPLIERS
VALUE
Nominal case size 
Ø D x L in mm
TEMPERATURE
0.625" x 1.125" [15.875 x 28.575]
to 1.0" x 3.625" [25.4 x 92.075]
AMBIENT TEMPERATURE
+105 °C
0.4
Operating temperature
-55 °C to +105 °C
+65 °C
1.7
Rated capacitance range, CR
12 μF to 33 000 μF
+45 °C
2.0
+25 °C
2.6
-10 %, +50 %
Tolerance on CR
6.3 WVDC to 300 WVDC
Rated voltage range, UR
Termination
Axial leads
Life validation test 
2000 h at 105 °C
CAP  15 % from initial
measurement.
ESR  1.25 x initial
specified limit.
DCL initial specified limit.
CAP  10 % from initial
measurement.
ESR  1.15 x initial specified
limit.
DCL  2.0 x initial
specified limit.
Shelf life 
500 h at 105 °C
FREQUENCY (Hz)
WVDC
50 TO 60
300 TO 400
0 to 60
0.85
1.10
1.15
61 to 250
0.83
1.15
1.20
1000 AND UP
LOW TEMPERATURE PERFORMANCE
CAPACITANCE RATIO C-55 °C/C+25 °C MINIMUM AT 120 Hz
RATED VOLTAGE WVDC
CAPACITANCE REMAINING
0 to 25
75 %
26 to 100
80 %
101 to 250
85 %
ESR RATIO ESR-55 °C/ESR+25 °C MAXIMUM AT 120 Hz
RATED VOLTAGE WVDC
I = k CV
k = 0.5 at +25 °C
k = 3.0 at +105 °C
I in μA, C in μF, V in Volts
DC leakage current
(after 5 min charge)
MULTIPLIERS
MULTIPLIER
0 to 9
10
10 to 40
12
41 to 250
18
DIMENSIONS in inches [millimeters]
CASE
CODE
FE
FJ
FL
FP
FS
FT
GE
GJ
Revision: 07-Nov-13
STYLE 1 AND 2
INSULATING SLEEVE
D
0.635 ± 0.020
[16.1 ± 0.51]
0.635 ± 0.020
[16.1 ± 0.51]
0.635 ± 0.020
[16.1 ± 0.51]
0.635 ± 0.020
[16.1 ± 0.51]
0.635 ± 0.020
[16.1 ± 0.51]
0.635 ± 0.020
[16.1 ± 0.51]
0.760 ± 0.020
[19.3 ± 0.51]
0.760 ± 0.020
[19.3 ± 0.51]
L
1.141 ± 0.062
[29.0 ± 1.57]
1.641 ± 0.062
[41.7 ± 1.57]
2.141 ± 0.062
[54.4 ± 1.57]
2.641 ± 0.062
[67.1 ± 1.57]
3.141 ± 0.062
[79.8 ± 1.57]
3.641 ± 0.062
[92.5 ± 1.57]
1.141 ± 0.062
[29.0 ± 1.57]
1.641 ± 0.062
[41.7 ± 1.57]
STYLE 3 AND 7
INSULATING SLEEVE, COATED END SEAL
D
0.635 ± 0.020
[16.1 ± 0.51]
0.635 ± 0.020
[16.1 ± 0.51]
0.635 ± 0.020
[16.1 ± 0.51]
0.635 ± 0.020
[16.1 ± 0.51]
0.635 ± 0.020
[16.1 ± 0.51]
0.635 ± 0.020
[16.1 ± 0.51]
0.760 ± 0.020
[19.3 ± 0.51]
0.760 ± 0.020
[19.3 ± 0.51]
L
1.187 ± 0.062
[30.2 ± 1.57]
1.687 ± 0.062
[42.9 ± 1.57]
2.187 ± 0.062
[55.6 ± 1.57]
2.687 ± 0.062
[68.3 ± 1.57]
3.187 ± 0.062
[81.0 ± 1.57]
3.687 ± 0.062
[93.7 ± 1.57]
1.187 ± 0.062
[30.2 ± 1.57]
1.687 ± 0.062
[42.9 ± 1.57]
TYPICAL
WEIGHT
0.32 oz.
(9.0 g)
0.39 oz.
(11.0 g)
0.53 oz.
(15.0 g)
0.63 oz.
(18.0 g)
0.88 oz.
(25.0 g)
0.98 oz.
(28.0 g)
0.46 oz.
(13.0 g)
0.67 oz.
(19.0 g)
Document Number: 42039
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
601D
www.vishay.com
Vishay Sprague
DIMENSIONS in inches [millimeters]
STYLE 1 AND 2
INSULATING SLEEVE
CASE
CODE
D
0.760 ± 0.020
[19.3 ± 0.51]
0.760 ± 0.020
[19.3 ± 0.51]
0.760 ± 0.020
[19.3 ± 0.51]
0.760 ± 0.020
[19.3 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
GL
GP
GS
GT
HE
HJ
HL
HP
HS
HT
JE
JJ
JL
JP
JS
JT
STYLE 3 AND 7
INSULATING SLEEVE, COATED END SEAL
L
2.141 ± 0.062
[54.4 ± 1.57]
2.641 ± 0.062
[67.1 ± 1.57]
3.141 ± 0.062
[79.8 ± 1.57]
3.641 ± 0.062
[92.5 ± 1.57]
1.141 ± 0.062
[29.0 ± 1.57]
1.641 ± 0.062
[41.7 ± 1.57]
2.141 ± 0.062
[54.4 ± 1.57]
2.641 ± 0.062
[67.1 ± 1.57]
3.141 ± 0.062
[79.8 ± 1.57]
3.641 ± 0.062
[92.5 ± 1.57]
1.141 ± 0.062
[29.0 ± 1.57]
1.641 ± 0.062
[41.7 ± 1.57]
2.141 ± 0.062
[54.4 ± 1.57]
2.641 ± 0.062
[67.1 ± 1.57]
3.141 ± 0.062
[79.8 ± 1.57]
3.641 ± 0.062
[92.5 ± 1.57]
D
0.760 ± 0.020
[19.3 ± 0.51]
0.760 ± 0.020
[19.3 ± 0.51]
0.760 ± 0.020
[19.3 ± 0.51]
0.760 ± 0.020
[19.3 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
TYPICAL
WEIGHT
L
2.187 ± 0.062
[55.6 ± 1.57]
2.687 ± 0.062
[68.3 ± 1.57]
3.187 ± 0.062
[81.0 ± 1.57]
3.687 ± 0.062
[93.7 ± 1.57]
1.187 ± 0.062
[30.2 ± 1.57]
1.687 ± 0.062
[42.9 ± 1.57]
2.187 ± 0.062
[55.6 ± 1.57]
2.687 ± 0.062
[68.3 ± 1.57]
3.187 ± 0.062
[81.0 ± 1.57]
3.687 ± 0.062
[93.7 ± 1.57]
1.187 ± 0.062
[30.2 ± 1.57]
1.687 ± 0.062
[42.9 ± 1.57]
2.187 ± 0.062
[55.5 ± 1.57]
2.687 ± 0.062
[68.3 ± 1.57]
3.187 ± 0.062
[81.0 ± 1.57]
3.687 ± 0.062
[93.7 ± 1.57]
0.74 oz.
(21.0 g)
0.88 oz.
(25.0 g)
1.16 oz.
(33.0 g)
1.33 oz.
(38.0 g)
0.63 oz.
(18.0 g)
0.95 oz.
(27.0 g)
1.02 oz.
(29.0 g)
1.37 oz.
(39.0 g)
1.72 oz.
(49.0 g)
2.07 oz.
(59.0 g)
0.81 oz.
(23.0 g)
1.02 oz.
(29.0 g)
1.54 oz.
(44.0 g)
1.86 oz.
(53.0 g)
2.21 oz.
(63.0 g)
2.52 oz.
(72.0 g)
DIMENSIONS AND AVAILABLE FORMS
Styles 1 and 2
Styles 3 and 7
PVC sleeve
PVC sleeve
1.25 min.
(31.8)
1.25 min.
(31.8)
-
1.25 min.
(31.8)
1.25 min.
(31.8)
D
-
+
D
+
W
W
L
L
Epoxy end seal
PART NUMBER INFORMATION
601D
158
F
6R3
FE
1
TYPE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING
CASE CODE
CASE STYLE
Identifies
the series
name.
Expressed in pF.
The first two digits are
significant figures.
The third is the
number of zeros.
F = -10 %/+50 % (std.)
Expressed in
volts. The letter
“R” signifies a
decimal point
(i.e. 6R3 = 6.3 V).
See table
Dimensions
1 = PVC sleeve (std.)
2 = Polyester sleeve
3 = Polyester sleeve with epoxy end
seal (required for exposure to
halogenated cleaning solvents)
7 = PVC sleeve with epoxy end seal
(required for exposure to
halogenated cleaning solvents)
Revision: 07-Nov-13
Document Number: 42039
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
601D
www.vishay.com
ORDERING EXAMPLE
Vishay Sprague
(1)
Electrolytic capacitor 601D series: 601D158F050GL1
Note
(1) For lead (Pb)-free/RoHS compliant products add suffix “E3” to part number. Example: 601D158F050GL1E3
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
PART NUMBER
1500
2700
3900
5600
6800
8200
2700
5600
8200
10 000
12 000
15 000
3900
8200
12 000
15 000
18 000
22 000
5600
10 000
18 000
22 000
27 000
33 000
601D158F6R3FE1
601D278F6R3FJ1
601D398F6R3FL1
601D568F6R3FP1
601D688F6R3FS1
601D828F6R3FT1
601D278F6R3GE1
601D568F6R3GJ1
601D828F6R3GL1
601D109F6R3GP1
601D129F6R3GS1
601D159F6R3GT1
601D398F6R3HE1
601D828F6R3HJ1
601D129F6R3HL1
601D159F6R3HP1
601D189F6R3HS1
601D229F6R3HT1
601D568F6R3JE1
601D109F6R3JJ1
601D189F6R3JL1
601D229F6R3JP1
601D279F6R3JS1
601D339F6R3JT1
1000
2200
3300
4700
5600
6800
2200
3900
6800
8200
10 000
12 000
3300
5600
8200
12 000
15 000
18 000
3900
8200
13 000
18 000
22 000
27 000
601D108F010FE1
601D228F010FJ1
601D338F010FL1
601D478F010FP1
601D568F010FS1
601D686F010FT1
601D228F010GE1
601D398F010GJ1
601D688F010GL1
601D828F010GP1
601D109F010GS1
601D129F010GT1
601D338F010HE1
601D568F010HJ1
601D828F010HL1
601D129F010HP1
601D159F010HS1
601D189F010HT1
601D398F010JE1
601D828F010JJ1
601D139F010JL1
601D189F010JP1
601D229F010JS1
601D279F010JT1
Revision: 07-Nov-13
NOMINAL CASE SIZE
DxL
(in)
LEAD DIAMETER
W
(in)
6.3 WVDC AT +85 °C, SURGE = 8 V
0.625 x 1.125
0.625 x 1.625
0.625 x 2.125
No. 20 AWG (0.032)
0.625 x 2.625
0.625 x 3.125
0.625 x 3.625
0.750 x 1.125
0.750 x 1.625
0.750 x 2.125
0.750 x 2.625
0.750 x 3.125
0.750 x 3.625
0.875 x 1.125
0.875 x 1.625
0.875 x 2.125
No. 18 AWG (0.040)
0.875 x 2.625
0.875 x 3.125
0.875 x 3.625
1.000 x 1.125
1.000 x 1.625
1.000 x 2.125
1.000 x 2.625
1.000 x 3.125
1.000 x 3.625
10 WVDC AT +85 °C, SURGE = 15 V
0.625 x 1.125
0.625 x 1.625
0.625 x 2.125
No. 20 AWG (0.032)
0.625 x 2.625
0.625 x 3.125
0.625 x 3.625
0.750 x 1.125
0.750 x 1.625
0.750 x 2.125
0.750 x 2.625
0.750 x 3.125
0.750 x 3.625
0.875 x 1.125
0.875 x 1.625
0.875 x 2.125
No. 18 AWG (0.040)
0.875 x 2.625
0.875 x 3.125
0.875 x 3.625
1.000 x 1.125
1.000 x 1.625
1.000 x 2.125
1.000 x 2.625
1.000 x 3.125
1.000 x 3.625
MAX. ESR
AT 120 Hz/25 °C
()
MAX. RIPPLE CURRENT
AT 120 Hz/85 °C
(A)
0.311
0.148
0.098
0.074
0.060
0.051
0.169
0.083
0.057
0.043
0.037
0.031
0.118
0.059
0.042
0.033
0.027
0.023
0.093
0.049
0.033
0.026
0.022
0.019
1.04
1.76
2.41
3.05
3.66
4.26
1.58
2.60
3.52
4.40
5.13
5.98
2.09
3.38
4.47
5.54
6.56
7.52
2.57
4.05
5.44
6.72
7.86
8.98
0.332
0.157
0.106
0.080
0.065
0.055
0.182
0.091
0.061
0.047
0.041
0.035
0.127
0.064
0.044
0.036
0.029
0.025
0.099
0.050
0.036
0.028
0.023
0.020
1.00
1.70
2.31
2.94
3.52
4.11
1.53
2.50
3.40
4.25
5.00
5.72
2.02
3.26
4.38
5.30
6.43
7.37
2.49
4.00
5.27
6.45
7.68
8.75
Document Number: 42039
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
601D
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
PART NUMBER
NOMINAL CASE SIZE
DxL
(in)
LEAD DIAMETER
W
(in)
MAX. ESR
AT 120 Hz/25 °C
()
MAX. RIPPLE CURRENT
AT 120 Hz/85 °C
(A)
16 WVDC AT +85 °C, SURGE = 20 V
820
601D827F016FE1
0.625 x 1.125
0.349
0.99
1800
601D188F016FJ1
0.625 x 1.625
0.175
1.62
2700
601D278F016FL1
0.625 x 2.125
3300
601D338F016FP1
0.625 x 2.625
0.115
2.23
0.087
2.83
3900
601D398F016FS1
0.625 x 3.125
0.071
3.37
4700
1500
601D478F016FT1
0.625 x 3.625
0.060
3.94
601D158F016GE1
0.750 x 1.125
0.198
3300
1.47
601D338F016GJ1
0.750 x 1.625
0.098
2.40
4700
601D478F016GL1
0.750 x 2.125
0.067
3.26
5600
601D568F016GP1
0.750 x 2.625
0.051
4.07
8200
601D828F016GS1
0.750 x 3.125
0.042
4.87
10 000
601D109F016GT1
0.750 x 3.625
0.036
5.64
2200
601D228F016HE1
0.875 x 1.125
0.139
1.93
4700
601D478F016HJ1
0.875 x 1.625
0.070
3.12
No. 20 AWG (0.032)
No. 18 AWG (0.040)
6800
601D688F016HL1
0.875 x 2.125
0.048
4.20
10 000
601D109F016HP1
0.875 x 2.625
0.037
5.23
12 000
601D129F016HS1
0.875 x 3.125
0.031
6.19
15 000
601D159F016HT1
0.875 x 3.625
0.027
7.06
3300
601D338F016JE1
1.000 x 1.125
0.108
2.38
6800
601D688F016JJ1
1.000 x 1.625
0.055
3.83
10 000
601D109F016JL1
1.000 x 2.125
0.038
5.10
25 WVDC AT +85 °C, SURGE = 40 V
560
601D567F025FE1
0.625 x 1.125
0.383
0.94
1000
601D108F025FJ1
0.625 x 1.625
0.198
1.52
1500
601D158F025FL1
0.625 x 2.125
0.125
2.14
2200
601D228F025FP1
0.625 x 2.625
0.096
2.68
2700
601D278F025FS1
0.625 x 3.125
0.078
3.22
3300
601D338F025FT1
0.625 x 3.625
0.065
3.79
1000
601D108F025GE1
0.750 x 1.125
0.213
1.41
No. 20 AWG (0.032)
1800
601D188F025GJ1
0.750 x 1.625
0.110
2.27
2700
601D278F025GL1
0.750 x 2.125
0.073
3.11
3900
601D398F025GP1
0.750 x 2.625
0.056
3.91
4700
601D478F025GS1
0.750 x 3.125
0.045
4.68
5600
601D568F025GT1
0.750 x 3.625
0.038
5.43
1500
601D158F025HE1
0.875 x 1.125
0.157
1.81
2700
601D278F025HJ1
0.875 x 1.625
0.076
2.98
3900
601D398F025HL1
0.875 x 2.125
5600
601D568F025HP1
0.875 x 2.625
6800
601D688F025HS1
0.875 x 3.125
0.033
6.00
8200
601D828F025HT1
0.875 x 3.625
0.028
6.91
1800
601D188F025JE1
1.000 x 1.125
0.117
2.28
3900
601D398F025JJ1
1.000 x 1.625
0.059
3.70
No. 18 AWG (0.040)
0.052
4.04
0.040
5.04
5600
601D568F025JL1
1.000 x 2.125
0.040
4.96
8200
601D828F025JP1
1.000 x 2.625
0.031
6.14
10 000
601D109F025JS1
1.000 x 3.125
0.027
7.15
12 000
601D129F025JT1
1.000 x 3.625
0.023
8.21
Revision: 07-Nov-13
Document Number: 42039
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
601D
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
PART NUMBER
NOMINAL CASE SIZE
DxL
(in)
LEAD DIAMETER
W
(in)
MAX. ESR
AT 120 Hz/25 °C
()
MAX. RIPPLE CURRENT
AT 120 Hz/85 °C
(A)
0.480
0.231
0.154
0.118
0.095
0.080
0.266
0.133
0.087
0.068
0.054
0.046
0.182
0.091
0.062
0.047
0.039
0.033
0.146
0.071
0.048
0.037
0.030
0.026
0.84
1.40
1.93
2.42
2.91
3.40
1.26
2.06
2.84
3.52
4.25
4.95
1.68
2.73
3.67
4.61
5.46
6.33
2.04
3.35
4.52
5.62
6.66
7.66
0.519
0.249
0.165
0.128
0.107
0.087
0.285
0.139
0.095
0.071
0.060
0.050
0.196
0.099
0.067
0.051
0.042
0.036
0.148
0.077
0.052
0.040
0.033
0.028
0.81
1.35
1.87
2.33
2.76
3.28
1.22
2.02
2.73
3.45
4.08
4.76
1.62
2.63
3.55
4.44
5.28
6.12
2.03
3.23
4.37
5.44
6.47
7.45
35 WVDC AT +85 °C, SURGE = 50 V
330
680
1000
1500
1800
2200
680
1200
2200
2700
3300
3900
1000
2200
2700
3900
4700
5600
1200
2700
3900
5600
6800
8200
601D337F035FE1
601D687F035FJ1
601D108F035FL1
601D158F035FP1
601D188F035FS1
601D228F035FT1
601D687F035GE1
601D128F035GJ1
601D228F035GL1
601D278F035GP1
601D338F035GS1
601D398F035GT1
601D108F035HE1
601D228F035HJ1
601D278F035HL1
601D398F035HP1
601D478F035HS1
601D568F035HT1
601D128F035JE1
601D278F035JJ1
601D398F035JL1
601D568F035JP1
601D688F035JS1
601D828F035JT1
0.625 x 1.125
0.625 x 1.625
0.625 x 2.125
0.625 x 2.625
0.625 x 3.125
0.625 x 3.625
0.750 x 1.125
0.750 x 1.625
0.750 x 2.125
0.750 x 2.625
0.750 x 3.125
0.750 x 3.625
0.875 x 1.125
0.875 x 1.625
0.875 x 2.125
0.875 x 2.625
0.875 x 3.125
0.875 x 3.625
1.000 x 1.125
1.000 x 1.625
1.000 x 2.125
1.000 x 2.625
1.000 x 3.125
1.000 x 3.625
270
470
680
1000
1200
1500
470
1000
1500
1800
2200
2700
680
1500
2200
2700
3300
3900
1000
1800
2700
3900
4700
5600
601D277F050FE1
601D477F050FJ1
601D687F050FL1
601D108F050FP1
601D128F050FS1
601D158F050FT1
601D477F050GE1
601D108F050GJ1
601D158F050GL1
601D188F050GP1
601D228F050GS1
601D278F050GT1
601D687F050HE1
601D158F050HJ1
601D228F050HL1
601D278F050HP1
601D338F050HS1
601D398F050HT1
601D108F050JE1
601D188F050JJ1
601D278F050JL1
601D398F050JP1
601D478F050JS1
601D568F050JT1
0.625 x 1.125
0.625 x 1.625
0.625 x 2.125
0.625 x 2.625
0.625 x 3.125
0.625 x 3.625
0.750 x 1.125
0.750 x 1.625
0.750 x 2.125
0.750 x 2.625
0.750 x 3.125
0.750 x 3.625
0.875 x 1.125
0.875 x 1.625
0.875 x 2.125
0.875 x 2.625
0.875 x 3.125
0.875 x 3.625
1.000 x 1.125
1.000 x 1.625
1.000 x 2.125
1.000 x 2.625
1.000 x 3.125
1.000 x 3.625
No. 20 AWG (0.032)
No. 18 AWG (0.040)
50 WVDC AT +85 °C, SURGE = 75 V
Revision: 07-Nov-13
No. 20 AWG (0.032)
No. 18 AWG (0.040)
Document Number: 42039
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
601D
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
PART NUMBER
NOMINAL CASE SIZE
DxL
(in)
LEAD DIAMETER
W
(in)
MAX. ESR
AT 120 Hz/25 °C
()
MAX. RIPPLE CURRENT
AT 120 Hz/85 °C
(A)
0.563
0.269
0.178
0.134
0.111
0.095
0.304
0.150
0.105
0.080
0.062
0.053
0.210
0.109
0.070
0.054
0.045
0.038
0.158
0.081
0.055
0.042
0.034
0.029
0.78
1.30
1.80
2.27
2.70
3.13
1.18
1.94
2.59
3.26
3.99
4.62
1.57
2.50
3.47
4.31
5.12
5.98
1.97
3.14
4.25
5.31
6.31
7.29
1.714
0.869
0.561
0.415
0.330
0.274
0.986
0.461
0.302
0.230
0.183
0.152
0.632
0.308
0.205
0.155
0.124
0.108
0.469
0.226
0.152
0.120
0.093
0.081
0.444
0.725
1.010
1.290
1.570
1.840
0.656
1.110
1.530
1.920
2.330
2.730
0.903
1.490
2.030
2.560
3.080
3.530
1.140
1.880
2.560
3.140
3.830
4.370
63 WVDC AT +85 °C, SURGE = 90 V
220
470
680
820
1000
1200
390
820
1200
1500
1800
2200
680
1200
1800
2200
2700
3900
820
1800
2700
3300
3900
4700
601D227F063FE1
601D477F063FJ1
601D687F063FL1
601D827F063FP1
601D108F063FS1
601D128F063FT1
601D397F063GE1
601D827F063GJ1
601D128F063GL1
601D158F063GP1
601D188F063GS1
601D228F063GT1
601D687F063HE1
601D128G063HJ1
601D188F063HL1
601D228F063HP1
601D278F063HS1
601D398F063HT1
601D827F063JE1
601D188F063JJ1
601D278F063JL1
601D338F063JP1
601D398F063JS1
601D478F063JT1
0.625 x 1.125
0.625 x 1.625
0.625 x 2.125
0.625 x 2.625
0.625 x 3.125
0.625 x 3.625
0.750 x 1.125
0.750 x 1.625
0.750 x 2.125
0.750 x 2.625
0.750 x 3.125
0.750 x 3.625
0.875 x 1.125
0.875 x 1.625
0.875 x 2.125
0.875 x 2.625
0.875 x 3.125
0.875 x 3.625
1.000 x 1.125
1.000 x 1.625
1.000 x 2.125
1.000 x 2.625
1.000 x 3.125
1.000 x 3.625
68
120
180
270
330
390
120
270
390
470
560
680
180
390
560
680
820
1000
270
470
820
1000
1200
1500
601D686F100FE1
601D127F100FJ1
601D187F100FL1
601D277F100FP1
601D337F100FS1
601D397F100FT1
601D127F100GE1
601D277F100GJ1
601D387F100GL1
601D477F100GP1
601D567F100GS1
601D687F100GT1
601D187F100HE1
601D397F100HJ1
601D567F100HL1
601D687F100HP1
601D827F100HS1
601D108F100HT1
601D277F100JE1
601D477F100JJ1
601D827F100JL1
601D108F100JP1
601D128F100JS1
601D157F100JT1
0.625 x 1.125
0.625 x 1.625
0.625 x 2.125
0.625 x 2.625
0.625 x 3.125
0.625 x 3.625
0.750 x 1.125
0.750 x 1.625
0.750 x 2.125
0.750 x 2.625
0.750 x 3.125
0.750 x 3.625
0.875 x 1.125
0.875 x 1.625
0.875 x 2.125
0.875 x 2.625
0.875 x 3.125
0.875 x 3.625
1.000 x 1.125
1.000 x 1.625
1.000 x 2.125
1.000 x 2.625
1.000 x 3.125
1.000 x 3.625
No. 20 AWG (0.032)
No. 18 AWG (0.040)
100 WVDC AT +85 °C, SURGE = 150 V
Revision: 07-Nov-13
No. 20 AWG (0.032)
No. 18 AWG (0.040)
Document Number: 42039
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
601D
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
PART NUMBER
NOMINAL CASE SIZE
DxL
(in)
LEAD DIAMETER
W
(in)
MAX. ESR
AT 120 Hz/25 °C
()
MAX. RIPPLE CURRENT
AT 120 Hz/85 °C
(A)
150 WVDC AT +85 °C, SURGE = 200 V
33
601D336F150FE1
0.625 x 1.125
3.518
0.310
68
601D686F150FJ1
0.625 x 1.625
1.677
0.522
100
601D107F150FL1
0.625 x 2.125
120
601D127F150FP1
0.625 x 2.625
150
601D157F150FS1
0.625 x 3.125
0.672
1.100
180
601D187F150FT1
0.625 x 3.625
0.560
1.290
0.451
No. 20 AWG (0.032)
1.114
0.718
0.842
0.907
56
601D566F150GE1
0.750 x 1.125
2.089
100
601D107F150GJ1
0.750 x 1.625
1.033
0.740
150
601D157F150GL1
0.750 x 2.125
0.683
1.020
220
601D227F150GP1
0.750 x 2.625
0.511
1.290
270
601D277F150GS1
0.750 x 3.125
0.409
1.560
330
601D337F150GT1
0.750 x 3.625
0.341
1.820
82
601D826F150HE1
0.875 x 1.125
1.395
0.608
150
601D157F150HJ1
0.875 x 1.625
0.695
0.989
270
601D277F150HL1
0.875 x 2.125
330
601D337F150HP1
0.875 x 2.625
390
601D397F150HS1
470
601D477F150HT1
100
220
0.451
1.370
0.345
1.710
0.875 x 3.125
0.273
2.080
0.875 x 3.625
0.226
2.440
601D107F150JE1
1.000 x 1.125
1.082
0.753
601D227F150JJ1
1.000 x 1.625
0.502
1.260
No. 18 AWG (0.040)
330
601D337F150JL1
1.000 x 2.125
0.328
1.740
470
601D477F150JP1
1.000 x 2.625
0.244
2.200
560
601D566F150JS1
1.000 x 3.125
0.195
2.650
680
601D687F150JT1
1.000 x 3.625
0.165
3.070
200 WVDC AT +85 °C, SURGE = 250 V
27
601D276F200FE1
0.625 x 1.125
3.985
0.292
56
601D566F200FJ1
0.625 x 1.625
1.892
0.491
82
601D826F200FL1
0.625 x 2.125
100
601D107F200FP1
0.625 x 2.625
120
601D127F200FS1
0.625 x 3.125
0.761
1.032
150
601D157F200FT1
0.625 x 3.625
0.651
1.190
47
601D476F200GE1
0.750 x 1.125
2.354
0.424
82
601D826F200GJ1
0.750 x 1.625
1.142
0.704
120
601D127F200GL1
0.750 x 2.125
0.774
0.956
180
601D187F200GP1
0.750 x 2.625
0.578
1.210
220
601D227F200GS1
0.750 x 3.125
0.462
1.460
270
601D277F200GT1
0.750 x 3.625
0.385
1.710
120
601D127F200HJ1
0.875 x 1.625
0.787
0.930
180
601D187F200HL1
0.875 x 2.125
0.521
1.270
270
601D277F200HP1
0.875 x 2.625
0.390
1.610
330
601D337F200HS1
0.875 x 3.125
0.302
1.970
390
601D397F200HT1
0.875 x 3.625
0.254
2.300
82
601D826F200JE1
1.000 x 1.125
1.128
0.737
180
601D187F200JJ1
1.000 x 1.625
0.560
1.200
No. 20 AWG (0.032)
No. 18 AWG (0.040)
1.242
0.680
0.925
0.865
270
601D277F200JL1
1.000 x 2.125
0.365
1.650
390
601D397F200JP1
1.000 x 2.625
0.278
2.060
470
601D477F200JS1
1.000 x 3.125
0.221
2.490
560
601D567F200JT1
1.000 x 3.625
0.183
2.910
Revision: 07-Nov-13
Document Number: 42039
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
601D
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
PART NUMBER
NOMINAL CASE SIZE
DxL
(in)
LEAD DIAMETER
W
(in)
MAX. ESR
AT 120 Hz/25 °C
()
MAX. RIPPLE CURRENT
AT 120 Hz/85 °C
(A)
7.136
3.228
2.132
1.591
1.270
1.057
3.614
1.721
1.130
0.880
0.690
0.568
2.369
1.148
0.753
0.574
0.464
0.375
1.708
0.829
0.548
0.410
0.328
0.274
0.22
0.38
0.52
0.66
0.80
0.94
0.34
0.57
0.79
0.98
1.20
1.41
0.47
0.77
1.06
1.33
1.59
1.89
0.60
0.98
1.34
1.69
2.04
2.38
8.217
3.809
2.479
1.839
1.461
1.231
4.164
1.931
1.294
0.953
0.795
0.672
2.712
1.296
0.886
0.679
0.519
0.441
1.973
0.947
0.637
0.468
0.386
0.318
0.20
0.35
0.48
0.61
0.75
0.87
0.32
0.54
0.74
0.94
1.12
1.30
0.44
0.72
0.98
1.22
1.50
1.74
0.56
0.92
1.25
1.59
1.88
2.21
250 WVDC AT +85 °C, SURGE = 300 V
15
33
47
68
82
100
27
56
100
120
150
180
47
100
150
180
220
270
56
120
180
270
330
390
601D156F250FE1
601D336F250FJ1
601D476F250FL1
601D686F250FP1
601D826F250FS1
601D107F250FT1
601D276F250GE1
601D566F250GJ1
601D107F250GL1
601D127F250GP1
601D157F250GS1
601D187F250GT1
601D476F250HE1
601D107F250HJ1
601D157F250HL1
601D187F250HP1
601D227F250HS1
601D277F250HT1
601D566F250JE1
601D127F250JJ1
601D187F250JL1
601D277F250JP1
601D337F250JS1
601D397F250JT1
0.625 x 1.125
0.625 x 1.625
0.625 x 2.125
0.625 x 2.625
0.625 x 3.125
0.625 x 3.625
0.750 x 1.125
0.750 x 1.625
0.750 x 2.125
0.750 x 2.625
0.750 x 3.125
0.750 x 3.625
0.875 x 1.125
0.875 x 1.625
0.875 x 2.125
0.875 x 2.625
0.875 x 3.125
0.875 x 3.625
1.000 x 1.125
1.000 x 1.625
1.000 x 2.125
1.000 x 2.625
1.000 x 3.125
1.000 x 3.625
12
27
39
47
56
68
22
47
68
100
120
150
33
68
100
150
180
220
47
100
150
180
220
270
601D126F300FE1
601D276F300FJ1
601D396F300FL1
601D476F300FP1
601D566F300FS1
601D686F300FT1
601D226F300GE1
601D476F300GJ1
601D686F300GL1
601D107F300GP1
601D127F300GS1
601D157F300GT1
601D336F300HE1
601D686F300HJ1
601D107F300HL1
601D157F300HP1
601D187F300HS1
601D227F300HT1
601D476F300JE1
601D107F300JJ1
601D157F300JL1
601D187F300JP1
601D227F300JS1
601D277F300JT1
0.625 x 1.125
0.625 x 1.625
0.625 x 2.125
0.625 x 2.625
0.625 x 3.125
0.625 x 3.625
0.750 x 1.125
0.750 x 1.625
0.750 x 2.125
0.750 x 2.625
0.750 x 3.125
0.750 x 3.625
0.875 x 1.125
0.875 x 1.625
0.875 x 2.125
0.875 x 2.625
0.875 x 3.125
0.875 x 3.625
1.000 x 1.125
1.000 x 1.625
1.000 x 2.125
1.000 x 2.625
1.000 x 3.125
1.000 x 3.625
No. 20 AWG (0.032)
No. 18 AWG (0.040)
300 WVDC AT +85 °C, SURGE = 350 V
Revision: 07-Nov-13
No. 20 AWG (0.032)
No. 18 AWG (0.040)
Document Number: 42039
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages