1F1 THRU 1F7

FAST RECOVERY RECTIFIER
VOLTAGE RANGE
CURRENT
1F1 THRU 1F7
50 to 1000 Volts
1.0 Ampere
R-1
FEATURES
•
•
•
•
•
Low coat construction
Fast switching for high efficiency.
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension
.787
MIN.
(20.0)
.138(3.5)
.114(2.9)
.102(2.6)
DIA.
.087(2.2)
MECHANICAL DATA
•
•
•
•
•
•
.787
MIN.
(20.0)
Case: Transfer molded plastic
Epoxy: UL94V-O rate flame retardant
Polarity: Color band denotes cathode end
Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
Mounting position: Any
Weight: 0.007ounce, 0.20 grams
.025(0.6)
DIA.
.021(0.5)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
•
•
Ratings at 25OC ambient temperature unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load
For capacitive load derate current by 20%
SYMBOLS
VRRM
VRMS
VDC
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
0.375”(9.5mm) lead length at T A= 25℃
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
Maximum Instantaneous Forward Voltage @ 1.0A
Maximum DC Reverse Current at Rated
DC Blocking Voltage
TA = 25℃
TA = 100℃
1F2
100
70
100
1F3
200
140
200
1F4
400
280
400
1F5
600
420
600
1F6
800
560
800
1F7
1000
700
1000
UNITS
Volts
Volts
Volts
I(AV)
1.0
Amps
IFSM
25
Amps
VF
1.3
5.0
50
250
15
Volts
IR
Typical Junction Capacitance (Note 1)
Trr
CJ
Typical Thermal Resistance (Note 2)
RθJA
Maximum Reverse Recovery Tine (Note 3) T J=25℃
1F1
50
35
50
150
50
TJTSTG
-55 to +150
Notes:
1.Measured at 1.0MHz and Applied Reverse Voltage of 4.0Volits.
2.Thermal Resistance from junction to Ambient at .375”(9.5mm)lead length, P.C.board mounted.
3.Reverse Recovery Test Conditions:If=0.5A,Ir=1.0A,Irr=0.25A
Operating and Storage Temperature Range
Web Site: www.hkmic.com
µAmps
500
ns
pF
℃/W
℃
FAST RECOVERY RECTIFIER
VOLTAGE RANGE
CURRENT
1F1 THRU 1F7
50 to 1000 Volts
1.0 Ampere
RATING AND CHRACTERISTIC CURVES 1F1 Thur 1F7
FIG.1-TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.2-MAXIMUM NON-REPETITIVE PEAK
AVERAGE FORW ARD CURRENT,
(A)
1.2
FORWARD SURGE CURRENT
30
0.8
0.6
0.4
Single Phase
Half Wave 60Hz
0.2
Resistive or
25
CURRENT, (A)
PEAK FORWARD SURGE
1.0
8.3ms Single Half Sine-Wave
(JEDEC Method) =T T j
jmax
20
10
Inductive Load
0
0
25
50
100
75
150
125
0
175
1
5
2
8
20
10
50
100
NUMBER OF CYCLES AT 60 Hz
AMBIENT TEMPERATURE, (° C)
FIG.3-TYPICAL INSTANTANEOUS
FIG.4-TYPICAL REVERSE
CHARACTERISTICS
FORWARD CHARACTERISTICS
20
10
INSTANTANEOUS REVERSE CURRENT,
(mA)
1
(A)
INSTANTANEOUS FORWARD CURRENT,
10
0.1
Tj =25° C
Pulse Width=300us
1% Duty Cycle
0.01
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
1.0
Tj =100° C
0.1
Tj =25° C
0.01
0
INSTANTANEOUS FORWARD VOLTAGE,(V)
20
40
60
80
PERCENT OF RATED PEAK
REVERSE VOLTAGE,(%)
FIG.5-TYPICAL JUNCTION CAPACITANCE
CAPACITANCE,(pF)
100
10
TJ=25° C F=1MHz
10
0.1
1.0
4.0
10.0
100
REVERSE VOLTAGE,(VOLTS)
Web Site: www.hkmic.com
100
120
140
Similar pages