link

Analog Power
AM1535CE
These miniature surface mount MOSFETs utilize a
high cell density trench process to provide low
rDS(on) and to ensure minimal power loss and heat
dissipation. Typical applications are DC-DC
converters and power management in portable and
battery-powered products such as computers,
printers, PCMCIA cards, cellular and cordless
telephones.
•
•
•
•
PRODUCT SUMMARY
VDS (V)
rDS(on) (Ω)
ID (A)
0.09 @ VGS = 4.5V
0.18 @ VGS = 2.5V
0.21 @ VGS = -4.5V
0.29 @ VGS = -2.5V
30
-30
1.5
1.1
-1.0
-0.9
Low rDS(on) provides higher efficiency and
extends battery life
Low thermal impedance copper leadframe
SC70-6 saves board space
Fast switching speed
High performance trench technology
ABSOLUTE MAXIMUM RATINGS (TA = 25 oC UNLESS OTHERWISE NOTED)
Symbol N-Channel P-Channel Units
Parameter
Drain-Source Voltage
VDS
30
-30
V
Gate-Source Voltage
VGS
8
-8
o
TA=25 C
a
Continuous Drain Current
o
1.5
1
1.3
0.8
IDM
0.7
-1.2
IS
0.25
-0.25
0.3
0.3
0.21
0.21
ID
TA=70 C
b
Pulsed Drain Current
a
Continuous Source Current (Diode Conduction)
o
TA=25 C
a
Power Dissipation
o
PD
TA=70 C
Operating Junction and Storage Temperature Range
TJ, Tstg
THERMAL RESISTANCE RATINGS
Parameter
Maximum Junction-to-Ambient
a
A
W
o
-55 to 150
Symbol
t <= 5 sec
Steady-State
A
RTHJA
C
Maximum Units
415
460
o
C/W
Notes
a.
Surface Mounted on 1” x 1” FR4 Board.
b.
Pulse width limited by maximum junction temperature
1
PRELIMINARY
Publication Order Number:
DS-AM1535CE_A
Analog Power
Parameter
AM1535CE
Symbol
Test Conditions
Min
Typ
Max
Unit
Static
Gate-Source Threshold Voltage
V GS(th)
Gate-Body Leakage
IGSS
Zero Gate Voltage Drain Current
IDSS
On-State Drain Current
ID(on)
Drain-Source On-Resistance
Forward Transconductance
Diode Forward Voltage
rDS(on)
gf s
V SD
Total Gate Charge
Qg
Gate-Source Charge
Qgs
Gate-Drain Charge
Qgd
Turn-On Delay Time
td(on)
Rise Time
Turn-Off Delay Time
Fall Time
±10
V DS = 0 V, V GS = ±8 V
V DS = 8 V, V GS = 0 V
(N-ch)
1
V DS = -8 V, V GS = 0 V
(P-ch)
-1
(N-ch)
1.5
A
(P-ch)
-1.5
A
V GS = 4.5 V, ID = 1.2 A
(N-ch)
90
VGS = 2.5 V, ID = 0.96 A
(N-ch)
180
VGS = -4.5 V, ID = -0.8 A
(P-ch)
210
VGS = -4.5 V, ID = -0.64 A (P-ch)
290
(N-ch)
3
(P-ch)
5
S
IS = 0.2 A, V GS = 0 V
(N-ch)
0.65
V
IS = -1.2 A, VGS = 0 V
Dynamic
(P-ch)
-0.66
V
V DS
N - Channel
= 10 V, VGS = 4.5 V, ID = 1.2 A
Total Gate Charge
Qg
Qgs
Gate-Drain Charge
Qgd
Turn-On Delay Time
td(on)
V DS
P - Channel
= -10 V, V GS = 4.5 V, ID = -0.8 A
8
8
25
4
0.5
td(of f )
ID = -0.8 A,
28
tf
V GEN = -4.5 V, RGEN = 6 Ω
Coss
Reverse Transfer Capacitance
Crss
P - Channel
V DS = -15 V, V GS = 0 V, f = 1 MHz
nC
0.9
10
Output Capacitance
pF
20
P - Channel
V DD = -10 V, RL = 12.5 Ω,
Ciss
ns
73
tr
Input Capacitance
nC
0.7
V GEN = 4.5 V, RGEN = 6 Ω
N - Channel
V DS = 15 V, V GS = 0 V, f = 1 MHz
S
5
0.3
tf
Gate-Source Charge
mΩ
V DS = -10 V, ID = -0.8 A
25
Crss
mΩ
V DS = 10 V, ID = 1.2 A
ID = 1.2 A,
Reverse Transfer Capacitance
uA
V DS = 5 V, V GS = 4.5 V
td(of f )
Coss
uA
V DS = -5 V, V GS = -4.5 V
13
Output Capacitance
Fall Time
V
V
N - Channel
VDD = 10 V, RL = 8.3 Ω,
Ciss
Turn-Off Delay Time
0.3
-0.3
tr
Input Capacitance
Rise Time
(N-ch)
V DS = V GS, ID = -250 uA (P-ch)
V DS = V GS, ID = 250 uA
8
ns
13
120
28
pF
25
Notes
a.
Pulse test: PW <= 300us duty cycle <= 2%.
b.
Guaranteed by design, not subject to production testing.
Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty,
representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of
the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential
or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different
applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products
are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal
injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall
indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an
Equal Opportunity/Affirmative Action Employer.
2
PRELIMINARY
Publication Order Number:
DS-AM1535CE_A
Analog Power
AM1535CE
Package Information
SC-70: 6LEAD
3
PRELIMINARY
Publication Order Number:
DS-AM1535CE_A