AOS Semiconductor Product Reliability Report AON1634, rev A Plastic Encapsulated Device ALPHA & OMEGA Semiconductor, Inc www.aosmd.com This AOS product reliability report summarizes the qualification result for AON1634. Accelerated environmental tests are performed on a specific sample size, and then followed by electrical test at end point. Review of final electrical test result confirms that AON1634 passes AOS quality and reliability requirements. The released product will be categorized by the process family and be monitored on a quarterly basis for continuously improving the product quality. Table of Contents: I. II. III. IV. Product Description Package and Die information Environmental Stress Test Summary and Result Reliability Evaluation I. Product Description: The AON1634 combines advanced trench MOSFET technology with a low resistance package to provide extremely low RDS(ON). This device is ideal for load switch and battery protection applications. - RoHS Compliant - Halogen-Free Detailed information refers to datasheet. II. Die / Package Information: AON1634 Standard sub-micron Low voltage N channel Package Type DFN 1.6x1.6A Lead Frame Cu Die Attach Ag epoxy Bonding Cu wire Mold Material Epoxy resin with silica filler MSL (moisture sensitive level) Level 1 based on J-STD-020 Process Note * based on information provided by assembler and mold compound supplier III. Result of Reliability Stress for AON1634 Test Item Test Condition Time Point Lot Attribution Total Sample size Number of Failures MSL Precondition 168hr 85°c /85%RH +3 cycle reflow@260°c HTGB - 3 lots 495pcs 0 JESD22A113 Temp = 150 °c, Vgs=100% of Vgsmax 168hrs 500 hrs 1000 hrs 308pcs 0 4 lots JESD22A108 Temp = 150 °c, Vds=80% of Vdsmax 168hrs 500 hrs 1000 hrs 77pcs / lot 308pcs 0 JESD22A108 HAST 130°°c, 85%RH, 33.3 psi, Vgs = 100% of Vgs max 100 hrs (Note A*) 3 lots 77pcs / lot 165pcs 0 JESD22A110 Pressure Pot 121°°c, 29.7psi, RH=100% 96 hrs (Note A*) 3 lots 55pcs / lot 165pcs 0 JESD22A102 Temperature Cycle -65°°c to 150°°c, air to air 250 / 500 cycles (Note A*) 3 lots 55pcs / lot 165pcs 0 JESD22A104 (Note A*) 55pcs / lot (Note A*) HTRB Standard 4 lots Note A: The reliability data presents the available generic data up to the published date. IV. Reliability Evaluation FIT rate (per billion): 12 MTTF = 9914 years The presentation of FIT rate for the individual product reliability is restricted by the actual burn-in sample size of the selected product (AON1634). Failure Rate Determination is based on JEDEC Standard JESD 85. FIT means one failure per billion hours. 2 9 Failure Rate = Chi x 10 / [2 (N) (H) (Af)] 9 = 1.83 x 10 / [2x (2x77x168+6x77x1000) x258] = 12 9 7 MTTF = 10 / FIT =8.68 x 10 hrs = 9914 years Chi² = Chi Squared Distribution, determined by the number of failures and confidence interval N = Total Number of units from HTRB and HTGB tests H = Duration of HTRB/HTGB testing Af = Acceleration Factor from Test to Use Conditions (Ea = 0.7eV and Tuse = 55°C) Acceleration Factor [Af] = Exp [Ea / k (1/Tj u – 1/Tj s)] Acceleration Factor ratio list: Af 55 deg C 70 deg C 85 deg C 100 deg C 115 deg C 130 deg C 150 deg C 258 87 32 13 5.64 2.59 1 Tj s = Stressed junction temperature in degree (Kelvin), K = C+273.16 Tj u = The use junction temperature in degree (Kelvin), K = C+273.16 -5 K = Boltzmann’s constant, 8.617164 X 10 eV / K