Download

CHDBX-1CL
HDBaseT™ Lite Repeater
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO.
DATE DD/MM/YY SUMMARY OF CHANGE
VR0
04/01/13
Preliminary Release
VS1
24/06/13
Updated Format/Diagrams
CONTENTS
1. Introduction�������������������������������������������� 1
2. Applications������������������������������������������� 1
3. Package Contents�������������������������������� 1
4. System Requirements���������������������������� 1
5. Features�������������������������������������������������� 2
6. Operation Controls and Functions������� 3
6.1 Front Panel�����������������������������������������3
6.2 Rear Panel�����������������������������������������4
7. Connection Diagram���������������������������� 5
8. Specifications���������������������������������������� 7
9. Acronyms����������������������������������������������� 7
1. INTRODUCTION
This HDBaseT™ Repeater allows HDBaseT Lite systems to be
extended and cascaded. The model supports the highest quality of
uncompressed high-definition HD video up to 4K×2K (Ultra HD), up to 8
channels of uncompressed multi-channel audio, RS-232 and IR control
systems, complete HDBaseT 3Play convergence with just a simple
connection over a single CAT5e/6/7 cable.
2. APPLICATIONS
• HDBaseT Lite signal extension up to 60m (up to 120m with additional
optional Repeater unit), 180m (1080p) in total (cascaded 3 times)
• Extending a zone's output range
• Cascading HDBaseT Lite equipment
3. PACKAGE CONTENTS
• HDBaseT Lite Repeater
• 24 V/1.25 A Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
HDBaseT Lite Transmitter and HDBaseT Lite Receiver with CAT5e/6/7
connection cables.
1
5. FEATURES
• HDMI, DVI and HDCP compliant
• Supports 3D over HDMI and 4k×2k (Ultra HD) resolution
• Supports CEC bypass
• Doubles up the distance of HDBaseT transmission between HDBaseT
Lite transmitter and receiver, with a single repeater. The transmission
distance can be added up 60 meters for every additional repeaters
up to 3 tiers
• Uncompressed video support up to [email protected]/36-bit and 4k×2K
(Ultra HD)
• Audio support up to LPCM 7.1CH, Dolby TrueHD and DTS-HD Master
Audio
• 3Play Convergence: Full uncompressed HD Video, Audio and
Controls (IR and RS-232) over a single CAT5e/6/7 cable
• Installation friendly
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDBaseT Repeater
MODE
CHDBX-1CL
LINK
CAT5e/6 OUT
1
2
3
1 MODE LED
The yellow LED will flash when the unit is powered or when an
active receiver is connected.
2 CAT5e/6 OUT
Connect to the receiver unit with a single CAT5e/6/7 cable (up to
60m).
3 LINK LED
The green LED will illuminate when output is connected to an
active receiver. The LED will flash if there is a problem with the
connection.
3
6.2 Rear Panel
POWER
MODE
DC 24V
LINK
CAT5e/6 IN
1
2
3
4
5
1 MODE LED
The yellow LED will flash when the unit is powered or when an
active transmitter is connected.
2 CAT5e/6 IN
Connect to the transmitter unit with a single CAT5e/6/7 cable (up
to 60m).
3 LINK LED
The green LED will illuminate when output is connected to an
active transmitter. The LED will flash if there is a problem with the
connection.
4 POWER
The LED will illuminate blue when the unit is connected to a power
supply.
5 DC 24V
4
Connect the 24V DC power adaptor included in the package to
the unit and plug it into an AC outlet.
7. CONNECTION DIAGRAM
Example 1
RS-232 Equipped PC
or Control System
Blu-ray Player
3m
m
7m
m
m
3m
1.5m
60°
HDMI
Input
60°
IR Extender
IR Blaster
RS-232
IR2 Extender
Power
Supply
RS232 In
HDMI In
TX
IR1 Blaster
DC 24V
Power
Link
Lite
CAT 5e /6 Out
Power
Supply
60 m
POWER
MODE
Rear
DC 24V
LINK
CAT5e/6 IN
Front
HDBaseT Repeater
MODE
CHDBX-1CL
LINK
CAT5e/6 OUT
60 m
RS-232 Device to
be Controlled
Power
Link
CAT 5e /6 In
IR1 Extender
RS232 Out
HDMI Out
RX
IR2 Blaster
RS-232
IR Extender
HDMI
Output
60°
IR Blaster
1.5m
60°
3m
m
7m
m
3m
HDTV
5
Example 2
Blu-ray Player
1.5m
3m
m
HDMI
Input
60°
7m
m
IR Blaster
IR Extender
Power
Supply
TX
Power
Supply
60 m
POWER
MODE
Rear
DC 24V
LINK
CAT5e/6 IN
Front
HDBaseT Repeater
MODE
CHDBX-1CL
LINK
CAT5e/6 OUT
Power
Supply
60 m
POWER
MODE
Rear
DC 24V
LINK
CAT5e/6 IN
Front
HDBaseT Repeater
MODE
CHDBX-1C
LINK
CAT5e/6 OUT
RX
IR Extender
HDMI
Output
3m
HDTV
6
60°
1.5m
60°
7m
m
Optional 2nd Repeater
extends the operating
distance by another 60 m
60 m
Power
Supply
3m
m
m
3m
60°
IR Blaster
8. SPECIFICATIONS
Video Bandwidth
300 MHz/10.2 Gbps
Input Port
1×CAT5e/6/7
Output Port
1×CAT5e/6/7
Resolution Support
[email protected]/60, [email protected], 4k×2K
CAT5e/6 In/Out Distance
Up to 60/60 meters
Power Supply
24 V/1.25 A DC (US/EU Standards, CE/
FCC/UL certified)
Dimensions
102 mm (W)×145 mm (D)×25 mm (H)
Weight
324 g
Chassis Material
Metal
Silkscreen Color
Silver
Operating Temperature
0 °C ~ 40 °C/32 °C~104 °C
Storage Temperature
-20 ˚C ~ 60 ˚C / -4 ˚F ~ 140 ˚F
Relative Humidity
20~90 % RH (non-condensing)
Power Consumption
16.2 W
9. ACRONYMS
ACRONYM
COMPLETE TERM
CAT5e
Category 5 Cable
CAT6
Category 6 Cable
CAT7
Category 7 Cable
CEC
Consumer Electronics Control
HDCP
High-bandwidth Digital Content Protection
HDMI
High Definition Multimedia Interface
PoE
Power over Ethernet
7
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
MPM-CHDBX1CL
Similar pages