Aluminum Electrolytic Capacitors (Surface Mount Type)[pdf :2.02 MB]

2016
Products Catalog
Aluminum Electrolytic Capacitors
Surface mount type
2016.04
http://industrial.panasonic.com/ww/products/capacitors/aluminum-capacitors/aluminum-cap-smd
——— Notices ———
■ Applicable Laws and Regulations
● This product complies with the RoHS Directive (Restriction of the use of certain Hazardous substances in
electrical and electronic equipment (DIRECTIVE 2011/65/EU).
● No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in
producing this product.
● We do not PBBs or PBDEs as brominated flame retardants.
● Export procedure which followed export related regulations, such as foreign exchange and a foreign trade
method, on the occasion of export of this product Thank you for your consideration.
■ Limited applications
● This capacitor is designed to be used for electronics circuits such as audio/visual equipment, home
appliances, computers and other office equipment, optical equipment, measuring equipment.
● High reliability and safety are required [ be / a possibility that incorrect operation of this product may do harm
to a human life or property ] more. When use is considered by the use, the delivery specifications which suited
the use separately need to be exchanged.
——— Items to be observed ———
● This specification guarantees the quality and performance of the product as individual components.
Before use, check and evaluate their compatibility with installed in your products.
● Do not use the products beyond the specifications described in this document.
■ For specifications
● Install the following systems for a failsafe design to ensure safety if these products are to be used in
equipment where a defect in these products may cause the loss of human life or other signification damage,
such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment,
electric heating appliances, combustion/ gas equipment, rotating rotating equipment, and disaster/crime
prevention equipment.
· The system is equipped with a protection circuit and protection device.
· The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event of
a single fault.
■ Conditions of use
● Before using the products, carefully check the effects on their quality and performance, and determined
whether or not they can be used. These products are designed and manufactured for general-purpose and
standard use in general electronic equipment. These products are not intended for use in the following special
conditions.
(1) In liquid, such as Water, Oil, Chemicals, or Organic solvent.
(2) In direct sunlight, outdoors, or in dust.
(3) In vapor, such as dew condensation water of resistive element, or water leakage, salty air, or air with a
high concentration corrosive gas, such as Cl2, H2S, NH3, SO2, or NOx.
(4) In an environment where strong static electricity or electromagnetic waves exist.
(5) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near
these products.
(6) Sealing or coating of these products or a printed circuit board on which these products are mounted,
with resin and other material.
(7) Using resolvent, water or water-soluble cleaner for flux cleaning agent after soldering. (In particular,
when using water or a water-soluble cleaning agent, be careful not to leave water residues)
(8) Using in the atmosphere which strays Acid or alkaline.
(9) Using in the atmosphere which there are excessive vibration and shock.
● Please arrange circuit design for preventing impulse or transitional voltage.
Do not apply voltage, which exceeds the full rated voltage when the capacitors receive impulse voltage,
instantaneous high voltage, high pulse voltage etc.
● Our products there is a product are using an electrolyte solution. Therefore, misuse can result in rapid
deterioration of characteristics and functions of each product. Electrolyte leakage damages printed circuit and
affects performance, characteristics, and functions of customer system.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Nov. 2015
Aluminum Electrolytic Capacitors (SMD Type)
Application Guidelines (SMD Type)
1. Circuit design
1.1 Operating Temperature and Frequency
Electrical parameters for electrolytic capacitors are normally specified at 20 °C temperature and 120 Hz frequency.
These parameters vary with changes in temperature and frequency. Circuit designers should take these changes
into consideration.
(1) Effects of operating temperature on electrical parameters
(a) At higher temperatures, leakage current and capacitance increase while equivalent series resistance
(ESR) decreases.
(b) At lower temperatures, leakage current and capacitance decrease while equivalent series resistance
(ESR) increases.
(2) Effects of frequency on electrical parameters
(a) At higher frequencies, capacitance and impedance decrease while tan d increases.
(b) At lower frequencies, heat generated by ripple current will rise due to an increase in equivalent series
resistance (ESR).
1.2 Operating Temperature and Life Expectancy
(1) Expected life is affected by operating temperature. Generally, each 10 °C reduction in temperature will double
the expected life.
Use capacitors at the lowest possible temperature below the upper category temperature.
(2) If operating temperatures exceed the upper category limit, rapid deterioration of electrical parameter will occur
and irreversible damage will result.
Check for the maximum capacitor operating temperatures including ambient temperature, internal capacitor
temperature rise due to ripple current, and the effects of radiated heat from power transistors, IC's or resistors.
Avoid placing components, which could conduct heat to the capacitor from the back side of the circuit board.
(3) The formula for calculating expected life at lower operating temperatures is as follows ;
L2 = L1×2
( T10-T )
1
2
L1 : Guaranteed life (h) at temperature, T1 °C
L2 : Expected life (h) at temperature, T2 °C
T1 : Upper category temperature (°C)
T2 : Actual operating temperature, ambient temperature + temperature rise due to ripple current (°C)
(4) Please use according to the lifetime as noted in this specification. Using products beyond end of the
lifetime may change characteristics rapidly, short-circuit, operate pressure relief vent, or leak electrolyte.
1.3 Common Application Conditions to Avoid
The following misapplication load conditions will cause rapid deterioration of a capacitor’s electrical parameters.
In addition, rapid heating and gas generation within the capacitor can occur, causing the pressure relief vent to
operate and resultant leakage of electrolyte. Under extreme conditions, explosion and fire ignition could result.
The leaked electrolyte is combustible and electrically conductive.
(1) Reverse Voltage
DC capacitors have polarity. Therefore, please do not apply the reverse voltage. Verify correct polarity
before insertion.
For circuits with changing or uncertain polarity, use DC bipolar capacitors. DC bipolar capacitors are not
suitable for use in AC circuits.
(2) Charge / Discharge Applications
Standard capacitors are not suitable for use in repeating charge/discharge applications. For charge/
discharge applications, consult us with your actual application condition.
For rush current, please to not exceed 100 A.
(3) ON-OFF circuit
Do not use capacitors in circuit where ON-OFF switching is repeated more than 10000 times/per day.
In case of applying to the theses ON-OFF circuit, consult with us about circuit condition and so on.
(4) Over voltage
Do not apply voltages exceeding the maximum specified rated voltage. Voltages up to the surge voltage
rating are acceptable for short periods of time.
Ensure that the sum of the DC voltage and the superimposed AC ripple voltage does not exceed the
rated voltage.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
(5) Ripple Current
Do not apply ripple currents exceeding the maximum specified value. For high ripple current applications,
use a capacitor designed for high ripple currents. In addition, consult us if the applied ripple current is to
be higher than the maximum specified value.
Ensure that rated ripple currents that superimposed on low DC bias voltages do not cause reverse
voltage conditions.
Even if it is within a rated ripple current, in case the practical use is over the pre described endurance
life time, it causes the increase of deterioration of ESR characteristic and the internal generation heat by
ripple current.
Due to this, there is some possibility of vent open, bulging of sleeve and rubber, electrolyte leakage, and
shot circuit, explosion and ignition in the worst case.
1.4 Using Two or More Capacitors in Series or Parallel
(1) Capacitors Connected in Parallel
The circuit resistance can closely approximate the series resistance of the capacitor, causing an
imbalance of ripple current loads within the capacitors. Careful wiring methods can minimize the possible
application of an excessive ripple current to a capacitor.
(2) Capacitors Connected in Series
Differences in normal DC leakage current among capacitors can cause voltage imbalances.
The use of voltage divider shunt resistors with consideration to leakage currents can prevent capacitor
voltage imbalances.
NOTE : Please do not use in the series in the case of conductive polymer hybrid aluminum electrolytic capacitor.
1.5 Capacitor Mounting Considerations
(1) Double-Sided Circuit Boards
Avoid wiring pattern runs, which pass between the mounted capacitor and the circuit board.
(2) Clearance for Case Mounted Pressure Relief (> 010 mm)
Capacitors with case mounted pressure relief require sufficient clearance to allow for proper pressure relief operation.
The minimum clearance are dependent on capacitor diameters as follows.
(Dia 10 mm to Dia 16 mm : 2 mm minimum, Dia 18 mm : 3 mm minimum)
(3) Wiring Near the Pressure Relief (> 010 mm)
Avoid locating high voltage or high current wiring or circuit board paths above the pressure relief. Flammable,
high temperature gas that exceeds 100 °C may be released which could dissolve the wire insulation and ignite.
(4) Circuit Board Patterns Under the Capacitor
Avoid circuit board runs under the capacitor, as an electrical short can occur due to an electrolyte leakage.
1.6 Electrical Isolation of the Capacitor
Completely isolate the capacitor as follows.
Between the cathode and the case and between the anode terminal and other circuit paths.
1.7 Capacitor Coating
The laminate coating is intended for marking and identification purposes and is not meant to electrically
insulate the capacitor.
2. Capacitor Handling Techniques
2.1 Considerations Before Using
(1) Capacitors have a finite life. Do not reuse or recycle capacitors from used equipment.
(2) Transient recovery voltage may be generated in the capacitor due to dielectric absorption.
If required, this voltage can be discharged with a resistor with a value of about 1 kΩ.
(3) Capacitors stored for a long period of time may exhibit an increase in leakage current.
This can be corrected by gradually applying rated voltage in series with a resistor of approximately 1 kΩ.
(4) If capacitors are dropped, they can be damaged mechanically or electrically. Avoid using dropped
capacitors.
(5) Dented or crushed capacitors should not be used. The seal integrity can be damaged and loss of
electrolyte/ shortened life can result.
2.2 Capacitor Insertion
(1)
(2)
(3)
(4)
Verify the correct capacitance and rated voltage of the capacitor.
Verify the correct polarity of the capacitor before insertion.
Verify the correct hole spacing and land pattern size before insertion to avoid stress on the terminals.
Excessive mounting pressure can cause high leakage current, short circuit, or disconnection.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
2.3 Reflow Soldering
(1) Surface-mount type capacitor are exclusively for reflow soldering.
When reflow solder is used an ambient heat condition system such as the simultaneous use of infrared
and hot-air is recommended.
(2) Observe proper soldering conditions (temperature, time, time of reflow, etc.). Do not exceed the specified limits.
✽ The Temperature on Capacitor top shall be measured by using thermal couple that is fixed firmly by epoxy glue.
(3) In case of use in 2 times reflow, 2nd reflow must be done when the capacitor’s temperature return back
to normal level.
(4) In our recommended reflow condition, the case discoloration and the case swelling might be slightly generated.
But please acknowledge that these two phenomena do not influence the reliability of the product.
(5) The crack on top marking might be occurred by reflow heat stress.
But please acknowledge that it does not influence the reliability of the product.
(6) VPS (Vapor Phase Soldering) reflow can cause significant characteristics change and/ or mounting failure
due to deformation by acute temperature rise.
VPS is acceptable provided that the process does not exceed recommended reflow profile and
temperature rise is less than 3 degC/ sec.
Please contact Panasonic for detailed conditions.
2.4 Manual Soldering
(1) Observe temperature and time soldering specifications or do not exceed temperature of 350 °C for 3 seconds or less.
(2) If a soldered capacitor must be removed and reinserted, avoid excessive stress on the capacitor leads.
(3) Avoid physical contacts between the tip of the soldering iron and capacitors to prevent or capacitor failure.
2.5 Capacitor Handling after Soldering
(1) Avoid moving the capacitor after soldering to prevent excessive stress on the lead wires where they enter the seal.
(2) Do not use the capacitor as a handle when moving the circuit board assembly.
(3) Avoid striking the capacitor after assembly to prevent failure due to excessive shock.
2.6 Circuit Board Cleaning
(1) Circuit boards can be immersed or ultrasonically cleaned using suitable cleaning solvents for up to 5 minutes
and up to 60 °C maximum temperatures. The boards should be thoroughly rinsed and dried.
The use of ozone depleting cleaning agents is not recommended for the purpose of protecting our environment.
(2) Avoid using the following solvent groups unless specifically allowed in the specification ;
(a) Halogenated cleaning solvents: except for solvent resistant capacitor types, halogenated solvents can
permeate the seal and cause internal capacitor corrosion and failure.
For solvent resistant capacitors, carefully follow the temperature and time requirements based on the specification.
1,1,1-trichloroethane should never be used on any aluminum electrolytic capacitor.
(b) Alkaline solvents
: could react and dissolve the aluminum case.
(c) Petroleum based solvents : deterioration of the rubber seal could result.
(d) Xylene
: deterioration of the rubber seal could result.
(e) Acetone
: removal of the ink markings on the vinyl sleeve could result.
(3) A thorough drying after cleaning is required to remove residual cleaning solvents that may be trapped
between the capacitor and the circuit board. Avoid drying temperatures, which exceed the Upper category
temperature of the capacitor.
4) Monitor the contamination levels of the cleaning solvents during use in terms of electrical conductivity,
pH, specific gravity, or water content. Chlorine levels can rise with contamination and adversely affect the
performance of the capacitor.
5) Depending on the cleaning method, the marking on a capacitor may be erased or blurred.
Please consult us if you are not certain about acceptable cleaning solvents or cleaning methods.
2.7 Mounting Adhesives and Coating Agents
When using mounting adhesives or coating agents to control humidity, avoid using materials containing
halogenated solvents.
Also, avoid the use of chloroprene based polymers.
Harden on dry adhesive or coating agents well lest the solvent should be left.
After applying adhesives or coatings, dry thoroughly to prevent residual solvents from being trapped between
the capacitor and the circuit board.
2.8 Fumigation
In exporting electronic appliances with aluminum electrolytic capacitors, in some cases fumigation treatment
using such halogen compound as methyl bromide is conducted for wooden boxes.
If such boxes are not dried well, the halogen left in the box is dispersed while transported and enters in the capacitors inside.
This possibly causes electrical corrosion of the capacitors. Therefore, after performing fumigation and drying
make sure that no halogen is left.
Don’t perform fumigation treatment to the whole electronic appliances packed in a box.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
3. Precautions for using capacitors
3.1 Environmental Conditions
Capacitors should not be used in the following environments.
(1) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor.
(2) Direct contact with water, salt water, or oil.
(3) High humidity conditions where water could condense on the capacitor.
(4) Exposure to toxic gases such as hydrogen sulfide, sulfuric acid, nitric acid, chlorine, Chlorine compound,
Bromine, Bromine compound or ammonia.
(5) Exposure to ozone, radiation, or ultraviolet rays.
(6) Vibration and shock conditions exceeding specified requirements.
3.2 Electrical Precautions
(1) Avoid touching the terminals of a capacitor as a possible electric shock could result. The exposed
aluminum case is not insulated and could also cause electric shock if touched.
(2) Avoid short circuiting the area between the capacitor terminals with conductive materials including liquids
such as acids or alkaline solutions.
(3) A low-molecular-weight-shiroxane which is included in a silicon material shall causes abnormal electrical characteristics.
4. Emergency Procedures
(1) If the pressure relief of the capacitor operates, immediately turn off the equipment and disconnect from the
power source.
This will minimize an additional damage caused by the vaporizing electrolyte.
(2) Avoid contact with the escaping electrolyte gas, which can exceed 100 °C temperatures.
If electrolyte or gas enters the eye, immediately flush the eye with large amounts of water.
If electrolyte or gas is ingested by mouth, gargle with water.
If electrolyte contacts the skin, wash with soap and water.
5. Long Term Storage
Leakage current of a capacitor increases with long storage times. The aluminum oxide film deteriorates as a
function of temperature and time.
If used without reconditioning, an abnormally high current will be required to restore the oxide film.
This surge current could cause the circuit or the capacitor to fail.
Expiration date is 42 months from outgoing inspection date.
However, expiration date for series which are not listed below is 12 months from outgoing inspection date.
Series
S (only High temperature reflow)
HA (only High temperature reflow)
HB (only High temperature reflow and 5.4 mm height)
HC, HD, FCA, FC, FKA, FK, FKS, FP, FT, TG, TK,
TP, TC, TCU, TQ
Expiration date
42 months from outgoing inspection date
For storage condition, keep room temperature (5 °C to 35 °C) and humidity (45 % to 85 %) where direct
sunshine doesn't reach.
5.1 Environmental Conditions
Do
(1)
(2)
(3)
(4)
not store under condition outside the area described in the specification, and also under conditions listed below.
Exposure to temperatures above the upper category or below the lower category temperature of the capacitor.
Direct contact with water, salt water, or oil.
High humidity conditions where water could condense on the capacitor.
Exposure to toxic gases such as hydrogen sulfide, sulfuric acid, nitric acid, chlorine, Chlorine compound,
Bromine, Bromine compound or ammonia.
(5) Exposure to ozone, radiation, or ultraviolet rays.
(6) Vibration and shock conditions exceeding specified requirements.
6. Capacitor Disposal
When disposing capacitors, use one of the following methods.
(1) Incinerate after crushing the capacitor or puncturing the can wall (to prevent explosion due to internal
pressure rise).
(2) Dispose as solid waste.
NOTE : Local laws may have specific disposal requirements which must be followed.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Jun. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Diagram
◼ Surface mount type
NEW
High temperature · Long life
TCU series
NEW
TC series
125 °C
3000 h
125 °C
2000 h to 3000 h
TQ series
TP series
TK series
TG series
125 °C
2000 h
125 °C
2000 h to 3000 h
125 °C
3000 h
125 °C
1000 h to 2000 h
Low impedance
HD series
105 °C
5000 h
Upgrade
NEW
FT series
FKS series
HC series
EB series (Large can)
105 °C
3000 h to 5000 h
105 °C
3000 h to 5000 h
HB series
HB series (5.4 L)
105 °C
2000 h
105 °C
2000 h
105 °C
2000 h to 5000 h
105 °C
2000 h
FP series
FK series
FC series
HA series
105 °C
2000 h
105 °C
2000 h to 5000 h
105 °C
1000 h
105 °C
1000 h
S series
85 °C
1000 h to 2000 h
Low impedance
◼ Radial lead type
Long Life · High ripple
EE series
TP series
105 °C
8000 h to 10000 h
135 °C/1000 h to 2000 h
125 °C/2000 h to 5000 h
EB series
TA series
105 °C
5000 h to 10000 h
125 °C
2000 h
FR series
FM series
HD series
105 °C
5000 h to 10000 h
105 °C
2000 h to 7000 h
105 °C
1000 h to 2000 h
FK series
FC series
NHG series
GA series (7L)
GA series Bi-polar
105 °C
3000 h to 5000 h
105 °C
1000 h to 5000 h
105 °C
1000 h to 2000 h
105 °C
1000 h
105 °C
1000 h to 2000 h
M series
SU series Bi-polar
85 °C
2000 h
85 °C
2000 h
KS/KA series
KS/KA series Bi-polar
85 °C
1000 h
85 °C
1000 h
Miniaturized
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Recommendable reflow soldering
compliant
Parts upper part temperature (°C)
● RoHS
260
250
Peak temperature
230
200
160 °C
150
120(s)
Time in (✽1)°C or more
100
50
Time
Lead-Free reflow
Reflow No.
Fig. (1)
Fig. (2)
Fig. (3)
Fig. (4)
Category
04 to 06.3
08 to 010
Peak temperature
250 °C
235 °C
230 °C
(220 °C)
230 °C
Time in peak temperature
5 s
5 s
5 s (5 s)
5 s
EB series
012.5 to 018 (010
to 018)
°C 20 s 200 °C 20 s
Time in (✽1) °C or more >200 °C 60 s >200 °C 60 s >200(30
>
s)
Time of reflow
1 time
1 time
1 time
1 time
High temperature Lead-Free reflow
Reflow No.
Fig. (5)
Fig. (6)
Fig. (7)
Category
04 to 06.3
08 to 010
08 to 010
Fig. (8)
06.3 to 010
(TK・TP series)
260 °C
245 °C
260 °C
250 °C
260 °C
255 °C
260 °C
(255 °C)
250 °C 5 s
Time in peak temperature >
>240 °C 10 s >250 °C 5 s >240 °C 10 s >250 °C 5 s >250 °C 30 s >250 °C 20 s
(10 s)
>230 °C 30 s >230 °C 30 s >230 °C 30 s >230 °C 30 s >230 °C 30 s >230 °C 40 s >230 °C 30 s
Peak temperature
Time in (✽1) °C or more >217 °C 40 s >217 °C 40 s >217 °C 40 s >217 °C 40 s >217 °C 40 s >217 °C 65 s >217 °C 65 s
>200 °C 70 s >200 °C 70 s >200 °C 70 s >200 °C 70 s >200 °C 70 s >200 °C 90 s >200 °C 70 s
Time of reflow
Reflow No.
2 times
2 times
1 time
2 times
1 time
2 times
2 times
Peak temperature
Fig. (9)
012.5 to 018
(FK, TK, HD series)
6.3 V.DC to 35 V.DC
245 °C
Fig. (10)
012.5 to 018
(FK series) 50 V.DC to 63 V.DC
(TK series) 50 V.DC
245 °C
Fig. (11)
012.5 to 018
(FK series) 80 V.DC to 100 V.DC
(TK series) 63 V.DC to 100 V.DC
245 °C
Time in peak temperature
>240 °C 30 s
>240 °C 5 s
>240 °C 5 s
Time in (✽1) °C or more
>217 °C 90 s
>217 °C 30 s
>217 °C 30 s
Time of reflow
2 times
2 times
1 time
Category
✽ For reflow, use a thermal condition system such as infrared radiation (IR) or hot blast.
✽ Panasonic have several series available for pure Tin terminal and ZVEI reflow based on J-STD-020D (JEDEC).
(Please contact sales for details.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Dimensions (Vibration-proof products)
A±0.2
–
K
F
(I)
✽ The size and shape are different from standard products. Please inquire details of our company.
(Unit : mm)
(P)
R
+
L✽
T
(I)
(S)
B±0.2
H
D±0.5
Size
0D L
code
F
I
W
P
K
R
S
T
E
8.0 6.5 8.3 9.5 0 to +0.15
3.4 0.7±0.1 2.2 0.35+0.15
–0.20 0.70±0.2 5.3±0.2 1.7±0.2
F
8.0 10.5 8.3 10.0 0 to +0.15
3.4 1.2±0.2 3.1 0.70±0.2 0.70±0.2 5.3±0.2 1.3±0.2
G 10.0 10.5 10.3 12.0 0 to +0.15
3.5 1.2±0.2 4.6 0.70±0.2 0.70±0.2 6.9±0.2 1.3±0.2
H13 12.5 13.8 13.5 15.0 –0.1 to +0.15 4.7 1.2±0.2 4.4 0.70±0.3 2.2±0.2 7.1±0.2 2.4±0.2
W
✽ E to G : L±0.3
H13 to K16 : L±0.5
A, H
B max.
J16 16.0 16.8 17.0 19.0 –0.1 to +0.15 5.5 1.4±0.2 6.7 0.70±0.3 3.0±0.2 9.0±0.2 1.9±0.2
Supportive Terminals
( ) Reference size
K16 18.0 16.8 19.0 21.0 –0.1 to +0.15 6.7 1.4±0.2 6.7 0.70±0.3 3.0±0.2 11.0±0.2 1.9±0.2
Land/Pad pattern
The circuit board land/pad pattern size for chip capacitors is specified in the following table.
The land pitch influences installation strength and consider it.
● Standard products
[Table of board land size vs. capacitor size]
Size code (Dimensions)
B (04)
C (05)
D (06.3)
E (08 × 6.2L)
F (08 × 10.2L)
G (010 × 10.2L)
H (012.5)
J (016)
K (018)
b
–
b
a
Land space
+
c
a
1.0
1.5
1.8
2.2
3.1
4.6
4.0
6.0
6.0
(Unit : mm)
b
2.5
2.8
3.2
4.0
4.0
4.1
5.7
6.5
7.5
c
1.6
1.6
1.6
1.6
2.0
2.0
2.0
2.5
2.5
✽ When size “a” is wide, back fillet can be made, decreasing fitting strength.
● Vibration-proof products
[Table of board land size vs. capacitor size]
Land space
G
Size code (Dimensions)
E (08 × 6.5L)
F (08 × 10.5L)
G (010)
H (012.5)
J (016)
K (018)
G
B
A
A
B
E D F
–
C
H
B
C
+
A
1.8
2.7
3.9
3.9
5.8
5.8
B
4.2
4.0
4.4
6.0
6.8
7.3
C
5.0
4.7
4.7
6.9
6.2
6.2
D
1.3
1.3
1.3
2.8
3.6
3.6
E
1.5
1.0
1.2
1.3
1.3
1.8
(Unit : mm)
F
1.4
1.7
1.9
1.9
1.9
1.9
G
1.5
1.1
1.1
2.2
1.7
1.7
H
2.0
2.5
2.5
2.5
2.8
2.8
✽ When size “A” is wide, back fillet can be made, decreasing fitting strength.
✽ Take mounting conditions, solderability and fitting strength into consideration when selecting parts for your company’s design.
Capacitor Ambient Temperature
Expected life estimate quick reference guide
24 hours
operation
(°C)
120
110 2
3
100
90
1 85 °C 2000 h
2 105 °C 1000 h
3 105 °C 2000 h
4 105 °C 5000 h
5 125 °C 2000 h
5
4
1
80
70
60
50
40
Time
(h)
2000
5000
10,000
20,000
(Year)
1
2
3
8 hours/d
operation (Year)
3
6
10
50,000 100,000
4 5
7
15 20
10
30
200,000
(Time)
20
(Year)
(Year)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Packaging specifications
● Reel
● Dimensions
dimensions
of outer carton box
W±1
L±5
2.0±0.5
50 min.
H±5
13.0±0.5
21.0±0.8
W±5
R:10
Unit : mm
B to G : 380±2
G13 to K21 : 330±2
Size code
B, C
D, D8, E
F, G
G13, G17
H13, H16
J16, J21
K16, K21
3.0
Unit : mm
Size code
B, C
D, E, D8
F, G
Size code
G13, G17
H13, H16
J16, J21
K16, K21
W
34
● Min.packing
46
Size code
Feeding hole
4.0±0.1
–
–
+
+
+
Polarity+(except
bi-polar type)
P±0.1
mm
mm
mm
mm
Tape running direction
350
230
350
Min.packing quantity pcs.
330 mm reel
250
200
150
125
75
G13
G17, H13
H16
J16, K16
J21, K21
A±0.2
210
Min.packing quantity pcs.
380 mm reel
2000
2000
1000
1000
1000
900
500
Height
Size code
C
–
E
D8
F, G
0.4
F±0.1
f1.5+0.1
0
B
W±0.3
2.0±0.1
C, D
D±0.2
W, L
395
395
395
quantity
L=5.4
L=5.8
L=5.4
L=5.8
–
–
–
B
dimensions (size B to G)
1.75±0.1
● Taping
W
14
18
26
H
220
250
220
Ask factory for technical specifications.
Size code
W
A
B
C
D
D8
E
F
G
12.0
12.0
16.0
16.0
16.0
24.0
24.0
4.7
5.7
7.0
7.0
8.7
8.7
10.7
● Taping
B
4.6 +0.2
–0.1
5.7 +0.3
–0.2
7.0 +0.3
–0.2
7.0 +0.3
–0.2
8.7 +0.3
–0.2
8.7 +0.3
–0.2
10.7 +0.3
–0.2
C
P
F
6.5±0.3
8.0±0.5
9.0±0.5
9.0±0.5
11.4±0.5
12.5±0.5
14.5±0.5
8.0
12.0
12.0
12.0
12.0
16.0
16.0
5.5
5.5
7.5
7.5
7.5
11.5
11.5
Size
code
–
–
+
+
+
P±0.1
A±0.5
0.5
Tape running direction
C±0.5
–
D±0.2
B±0.5
4.0±0.1
1.75±0.1
2.0±0.1
1.5+0.1
0
F±0.1
S±0.1
0.75+0.1
0
W±0.3
L=5.4 mm
5.8
5.8
5.8
L=5.8 mm
6.2
6.4
6.4
8.4
6.8
11.0
11.0
dimensions (size G13 to K21)
0.2±0.05
Polarity
D
Height
G13
G17
H13
H16
J16
J21
K16
K21
Taping size
A
10.7
10.7
14.0
14.0
17.5
17.5
19.5
19.5
B
10.7
10.7
14.0
14.0
17.5
17.5
19.5
19.5
C
14.5
14.5
18.0
18.0
23.0
23.0
26.0
26.0
D
14.5
17.5
14.5
17.5
17.5
22.5
17.5
22.5
F
14.2
14.2
14.2
14.2
20.2
20.2
20.2
20.2
P
20.0
20.0
24.0
24.0
28.0
28.0
32.0
32.0
S
28.4
28.4
28.4
28.4
40.4
40.4
40.4
40.4
W
32.0
32.0
32.0
32.0
44.0
44.0
44.0
44.0
Ask factory for technical specifications.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : S Type : V
High temperature Lead-Free reflow (suffix : A✽)
Features
● Endurance
: 85 °C 2000 h
product is available upon request. (08 mm and larger)
● RoHS compliant
● Vibration-proof
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +85 °C
6.3 V.DC to 50 V.DC
1 µF to 1500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
V.DC
6.3 10 16 25 35 50
Z(–25 °C)/Z(+20 °C)
4
3
2
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C)
8
6
4
4
3
3
After applying rated working voltage for 2000 hours (Miniaturization product type 1000 hours)
at +85 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meer the following limits.
Within ±20 % of the initial value
Size code
Cap. change
Capacitance change
D8 (06.3×7.7)
2000 hours ±25 %
1000 hours ±30 %
< D (06.3) Miniature
< 200 % of the initial limit
tan d
DC leakege current
Within the initial limit
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current
Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
50, 60
120
1k
10 k to
Correction factor
0.70
1.00
1.30
1.70
Capacitance (µF)
22
6S
Lot number
Series indentification
(S) or (A)
Mark for Lead-Free
products
(Black dot)
Rated voltage (V.DC)
(6=6.3 V.DC)
A±0.2
(P)
H
0D±0.5
Negative polarity marking (–)
–
+
L
W
Pressure Relief (010 and larger)
Size
code 0D
B
4.0
C
5.0
D
6.3
D8
6.3
E
8.0
F
8.0
G 10.0
L
A, B
(I)
0.3 max.
Example : 6.3 V.DC 22 µF
Marking color : BLACK
K
(I)
Dimensions
B±0.2
Marking
( ) Reference size
(Unit : mm)
H.
4.3 5.5 max
5.4 +0.1
-0.2
5.4 +0.1
5.3 6.5 max
-0.2
5.4 +0.1
6.6 7.8 max
-0.2
7.7±0.3 6.6 7.8 max
6.2±0.3 8.3 9.5 max
10.2±0.3 8.3 10.0 max
10.2±0.3 10.3 12.0 max
I
W
P
K
1.8
2.2
2.6
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.0
1.5
1.8
1.8
2.2
3.1
4.6
0.35 +0.15
-0.20
0.35 +0.15
-0.20
0.35 +0.15
-0.20
0.35 +0.15
-0.20
0.35 +0.15
-0.20
0.70±0.20
0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
22
33
47
100
6.3
330
470
1000
1500
22
33
47
100
10
220
330
470
1000
10
22
33
47
16
100
220
330
470
4.7
10
22
33
25
47
100
220
330
470
✽
0D
L
Size
code
4
4
5
5
6.3
6.3
8
8
10
10
4
4
5
5
5
6.3
6.3
8
8
8
10
10
4
4
5
5
5
6.3
6.3
8
6.3
8
8
10
8
10
4
4
5
5
6.3
5
6.3
6.3
8
6.3
8
8
10
8
10
10
5.4
5.4
5.4
5.4
5.4
7.7
6.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
7.7
6.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
7.7
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
7.7
10.2
10.2
10.2
10.2
10.2
10.2
B
(B)
C
(C)
D
D8
E
(F)
G
(G)
(B)
(B)
C
(C)
(C)
D
D8
E
F
(F)
G
(G)
B
(B)
C
(C)
(C)
D
(D)
E
D8
(F)
(F)
G
(F)
G
B
(B)
C
(C)
D
(C)
D
(D)
(E)
D8
F
(F)
G
(F)
G
(G)
Specification
Ripple
current
tan d
Endurance
(120 Hz) (120 Hz)
(hours)
(+85 °C) (+20 °C)
(mA r.m.s.)
29
0.30
2000
22
0.35
1000
46
0.30
2000
47
0.40
1000
71
0.30
2000
188
0.30
2000
300
0.35
2000
380
0.35
1000
700
0.35
2000
750
0.50
1000
28
0.30
1000
29
0.30
1000
43
0.22
2000
47
0.30
1000
50
0.30
1000
70
0.26
2000
173
0.22
2000
250
0.26
2000
390
0.26
2000
390
0.26
1000
400
0.26
2000
580
0.35
1000
28
0.16
2000
28
0.26
1000
39
0.16
2000
35
0.26
1000
39
0.26
1000
70
0.16
2000
70
0.26
1000
200
0.20
2000
162
0.20
2000
280
0.20
1000
320
0.20
1000
380
0.20
2000
350
0.26
1000
420
0.20
2000
22
0.14
2000
22
0.20
1000
28
0.14
2000
35
0.20
1000
55
0.14
2000
42
0.20
1000
65
0.14
2000
70
0.20
1000
91
0.16
1000
143
0.16
2000
180
0.16
2000
230
0.20
1000
310
0.16
2000
270
0.20
1000
340
0.16
2000
380
0.25
1000
Min. Packaging Q'ty
Part No.
EEE0JA220AR
EEE0JA330WAR
EEE0JA470AR
EEE0JA101WAR
EEE0JA101AP
EEE0JA331XAP
EEE0JA331AP
EEE0JA471UAP
EEE0JA102AP
EEE0JA152UAP
EEE1AA220WAR
EEE1AA330WAR
EEE1AA330AR
EEE1AA470WAR
EEE1AA101WAR
EEE1AA101AP
EEE1AA221XAP
EEE1AA221AP
EEE1AA331AP
EEE1AA471UAP
EEE1AA471AP
EEE1AA102UAP
EEE1CA100AR
EEE1CA220WAR
EEE1CA220AR
EEE1CA330WAR
EEE1CA470WAR
EEE1CA470AP
EEE1CA101WAP
EEE1CA101AP
EEE1CA221XAP
EEE1CA221UAP
EEE1CA331UAP
EEE1CA331AP
EEE1CA471UAP
EEE1CA471AP
EEE1EA4R7AR
EEE1EA100WAR
EEE1EA100AR
EEE1EA220WAR
EEE1EA220AP
EEE1EA330WAR
EEE1EA330AP
EEE1EA470WAP
EEE1EA101UAP
EEE1EA101XAP
EEE1EA101AP
EEE1EA221UAP
EEE1EA221AP
EEE1EA331UAP
EEE1EA331AP
EEE1EA471UAP
Reflow
Taping
(pcs)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(5)
(7)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(5)
(7)
(7)
(7)
(7)
(7)
(7)
2000
2000
1000
1000
1000
900
1000
500
500
500
2000
2000
1000
1000
1000
1000
900
1000
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
1000
900
500
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
1000
1000
900
500
500
500
500
500
500
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
4.7
10
22
33
35
47
100
220
330
1
2.2
3.3
4.7
10
22
50
33
47
100
220
✽
0D
L
Size
code
4
4
5
5
6.3
6.3
8
6.3
8
6.3
8
10
8
10
10
4
4
4
4
5
5
6.3
6.3
8
8
6.3
8
6.3
8
10
8
10
10
5.4
5.4
5.4
5.4
5.4
5.4
6.2
5.4
6.2
7.7
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
6.2
7.7
10.2
7.7
10.2
10.2
10.2
10.2
10.2
B
(B)
C
(C)
D
(D)
E
(D)
E
D8
(F)
G
(F)
G
(G)
B
B
B
(B)
C
(C)
D
(D)
E
(E)
D8
F
D8
(F)
G
(F)
G
(G)
Specification
Ripple
current
tan d
Endurance
(120 Hz) (120 Hz)
(hours)
(+85 °C) (+20 °C)
(mA r.m.s.)
22
0.12
2000
22
0.16
1000
30
0.12
2000
36
0.16
1000
60
0.12
2000
60
0.16
1000
130
0.14
2000
70
0.16
1000
165
0.14
2000
132
0.14
2000
140
0.14
1000
210
0.14
2000
200
0.14
1000
310
0.14
2000
350
0.30
1000
10
0.12
2000
16
0.12
2000
16
0.12
2000
18
0.14
1000
23
0.12
2000
27
0.14
1000
35
0.12
2000
40
0.14
1000
120
0.12
2000
65
0.12
1000
65
0.14
2000
110
0.12
2000
105
0.14
2000
110
0.12
1000
130
0.12
2000
200
0.18
1000
250
0.12
2000
300
0.18
1000
Min. Packaging Q'ty
Part No.
EEE1VA4R7AR
EEE1VA100WAR
EEE1VA100AR
EEE1VA220WAR
EEE1VA220AP
EEE1VA330WAP
EEE1VA330AP
EEE1VA470WAP
EEE1VA470AP
EEE1VA101XAP
EEE1VA101UAP
EEE1VA101AP
EEE1VA221UAP
EEE1VA221AP
EEE1VA331UAP
EEE1HA1R0AR
EEE1HA2R2AR
EEE1HA3R3AR
EEE1HA4R7WAR
EEE1HA4R7AR
EEE1HA100WAR
EEE1HA100AP
EEE1HA220WAP
EEE1HA220AP
EEE1HA330UAP
EEE1HA330XAP
EEE1HA330AP
EEE1HA470XAP
EEE1HA470UAP
EEE1HA470AP
EEE1HA101UAP
EEE1HA101AP
EEE1HA221UAP
Reflow
Taping
(pcs)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(5)
(7)
(5)
(7)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(5)
(7)
(5)
(7)
(7)
(7)
(7)
(7)
2000
2000
1000
1000
1000
1000
1000
1000
1000
900
500
500
500
500
500
2000
2000
2000
2000
1000
1000
1000
1000
1000
1000
900
500
900
500
500
500
500
500
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : S Type : V
Features
● Endurance
: 85 °C 2000 h
product is available upon request. (08 mm and larger)
● RoHS compliant
● Vibration-proof
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +85 °C
4 V.DC to 100 V.DC
1 µF to 1500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) (Bi-Polar I < 0.02 CV or 6 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
V.DC
4
6.3 10 16 25 35 50 63 100
Z(–25 °C)/Z(+20 °C) 7
4
3
2
2
2
2
3
3 (Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C) 15
8
6
4
4
3
3
4
4
After applying rated working voltage for 2000 hours (Bi-polar:1000 hours for each polarity) at
+85 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits.
Within ±20 % of the initial value
Size code
Rated voltage
Cap. change
Capacitance change B(04) to D, D8(06.3)
4 V.DC
1000 hours ±30 %
6.3 V.DC
< D(06.3) Miniature
1000 hours ±20 %
> 10 V.DC
tan d
< 200 % of the initial limit
DC leakege current
Within the initial limit
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current
Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
50, 60
120
1k
10 k to
Correction factor
0.70
1.00
1.30
1.70
0.3 max.
L
Pressure Relief (010 and larger)
Capacitance (µF)
33
4S
Series indentification
(S) or (A)
Mark for Lead-Free
products
(Black dot)
Lot number
Rated voltage (V.DC)
(6=6.3 V.DC)
Size
code
B
C
D
D8
E
F
G
0D
L
A, B
0.1
4.3
4.0
5.4+- 0.2
0.1
5.0
5.4+- 0.2
5.3
0.1
6.3
5.4+- 0.2
6.6
6.3
7.7±0.3 6.6
8.0
6.2±0.3 8.3
8.0 10.2±0.3 8.3
10.0 10.2±0.3 10.3
A±0.2
(P)
B±0.2
Negative polarity marking (–)
(No marking for the bi-polar)
–
H
0D±0.5
Example : 4 V.DC 33 µF
Marking color : BLACK
K
(I)
Dimensions
+
(I)
Marking
W
( ) Reference size
(Unit : mm)
H
I
W
5.5 max.
6.5 max.
7.8 max.
7.8 max.
9.5 max.
10.0 max.
12.0 max.
1.8
2.2
2.6
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
P
K
1.0 0.35 +- 0.15
0.20
1.5 0.35 +- 0.15
0.20
+ 0.15
1.8 0.35 - 0.20
1.8 0.35 +- 0.15
0.20
2.2 0.35 +- 0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
4
33
47
100
220
330
470
22
33
47
100
6.3
220
330
470
1000
1500
22
33
47
100
10
220
330
470
1000
10
22
33
47
16
100
220
330
470
✽
0D
L
Size
code
4
4
5
6.3
6.3
6.3
4
4
4
5
5
6.3
6.3
6.3
8
8
8
10
10
4
4
5
5
5
6.3
6.3
8
8
8
10
10
4
4
5
5
5
6.3
6.3
8
6.3
8
8
10
8
10
5.4
5.4
5.4
5.4
5.4
7.7
5.4
5.4
5.4
5.4
5.4
5.4
5.4
7.7
6.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
7.7
6.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
7.7
10.2
10.2
10.2
10.2
10.2
B
B
C
D
(D)
D8
B
(B)
(B)
C
(C)
D
(D)
D8
E
F
(F)
G
G
(B)
(B)
C
(C)
(C)
D
D8
E
F
(F)
G
G
B
(B)
C
(C)
(C)
D
(D)
E
D8
F
(F)
G
(F)
G
Ripple
tan d
current
Endurance
(120 Hz) (120 Hz)
(hours)
(+85 °C) (+20 °C)
(mA r.m.s.)
26
0.35
1000
34
0.35
1000
61
0.35
1000
82
0.35
1000
80
0.50
1000
200
0.35
1000
29
0.26
2000
22
0.35
1000
36
0.35
1000
46
0.26
2000
47
0.35
1000
71
0.26
2000
74
0.35
1000
188
0.26
2000
300
0.35
2000
380
0.35
2000
500
0.35
2000
700
0.35
2000
750
0.35
2000
28
0.30
1000
29
0.30
1000
43
0.20
2000
43
0.30
1000
50
0.30
1000
70
0.26
2000
173
0.20
2000
250
0.26
2000
390
0.26
2000
390
0.26
2000
400
0.26
2000
580
0.26
2000
28
0.16
2000
28
0.26
1000
39
0.16
2000
35
0.26
1000
39
0.26
1000
70
0.16
2000
70
0.26
1000
200
0.20
2000
162
0.16
2000
280
0.20
2000
320
0.20
2000
380
0.20
2000
350
0.20
2000
420
0.20
2000
Min. Packaging Q'ty
Part No.
EEE0GA330SR
EEE0GA470SR
EEE0GA101SR
EEE0GA221SP
EEE0GA331WP
EEE0GA471XP
EEE0JA220SR
EEE0JA330WR
EEE0JA470WR
EEE0JA470SR
EEE0JA101WR
EEE0JA101SP
EEE0JA221WP
EEE0JA331XP
EEE0JA331P
EEE0JA471P
EEE0JA102UP
EEE0JA102P
EEE0JA152P
EEE1AA220WR
EEE1AA330WR
EEE1AA330SR
EEE1AA470WR
EEE1AA101WR
EEE1AA101SP
EEE1AA221XP
EEE1AA221P
EEE1AA331P
EEE1AA471UP
EEE1AA471P
EEE1AA102P
EEE1CA100SR
EEE1CA220WR
EEE1CA220SR
EEE1CA330WR
EEE1CA470WR
EEE1CA470SP
EEE1CA101WP
EEE1CA101P
EEE1CA221XP
EEE1CA221P
EEE1CA331UP
EEE1CA331P
EEE1CA471UP
EEE1CA471P
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(2)
(2)
(2)
(2)
2000
2000
1000
1000
1000
900
2000
2000
2000
1000
1000
1000
1000
900
1000
500
500
500
500
2000
2000
1000
1000
1000
1000
900
1000
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
1000
900
500
500
500
500
500
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
4.7
10
22
33
25
47
100
220
330
470
4.7
10
22
33
35
47
100
220
330
✽
0D
L
Size
code
4
4
5
5
6.3
5
6.3
6.3
6.3
8
8
8
10
8
10
10
4
4
5
5
6.3
6.3
8
6.3
8
6.3
8
10
8
10
10
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
7.7
6.2
10.2
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
6.2
5.4
6.2
7.7
10.2
10.2
10.2
10.2
10.2
B
(B)
C
(C)
D
(C)
D
(D)
D8
(E)
F
(F)
G
(F)
G
G
B
(B)
C
(C)
D
(D)
E
(D)
E
D8
(F)
G
(F)
G
G
Ripple
tan d
current
Endurance
(120 Hz) (120 Hz)
(hours)
(+85 °C) (+20 °C)
(mA r.m.s.)
22
0.14
2000
22
0.20
1000
28
0.14
2000
35
0.20
1000
55
0.14
2000
42
0.20
1000
65
0.14
2000
70
0.20
1000
143
0.14
2000
91
0.16
2000
180
0.16
2000
230
0.16
2000
310
0.16
2000
270
0.16
2000
340
0.16
2000
380
0.16
2000
22
0.12
2000
22
0.16
1000
30
0.12
2000
36
0.16
1000
60
0.12
2000
60
0.16
1000
130
0.14
2000
70
0.16
1000
165
0.14
2000
132
0.12
2000
140
0.14
2000
210
0.14
2000
200
0.14
2000
310
0.14
2000
350
0.14
2000
Min. Packaging Q'ty
Part No.
EEE1EA4R7SR
EEE1EA100WR
EEE1EA100SR
EEE1EA220WR
EEE1EA220SP
EEE1EA330WR
EEE1EA330SP
EEE1EA470WP
EEE1EA101XP
EEE1EA101UP
EEE1EA101P
EEE1EA221UP
EEE1EA221P
EEE1EA331UP
EEE1EA331P
EEE1EA471P
EEE1VA4R7SR
EEE1VA100WR
EEE1VA100SR
EEE1VA220WR
EEE1VA220SP
EEE1VA330WP
EEE1VA330P
EEE1VA470WP
EEE1VA470P
EEE1VA101XP
EEE1VA101UP
EEE1VA101P
EEE1VA221UP
EEE1VA221P
EEE1VA331P
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(1)
(2)
(2)
(2)
(2)
(2)
2000
2000
1000
1000
1000
1000
1000
1000
900
1000
500
500
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
1000
1000
900
500
500
500
500
500
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
1
2.2
3.3
4.7
10
22
50
33
47
100
220
22
63
33
47
100
4.7
10
100
22
33
✽
0D
L
Size
code
4
4
4
4
5
5
6.3
6.3
8
6.3
8
8
6.3
8
10
8
10
10
8
8
8
8
10
10
8
8
8
8
10
10
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
7.7
6.2
10.2
7.7
10.2
10.2
10.2
10.2
10.2
6.2
10.2
10.2
10.2
10.2
10.2
6.2
6.2
10.2
10.2
10.2
10.2
B
B
B
(B)
C
(C)
D
(D)
E
D8
(E)
F
D8
(F)
G
(F)
G
G
(E)
F
F
(F)
G
G
(E)
(E)
F
(F)
G
G
Ripple
tan d
current
Endurance
(120 Hz) (120 Hz)
(hours)
(+85 °C) (+20 °C)
(mA r.m.s.)
10
0.12
2000
16
0.12
2000
16
0.12
2000
18
0.14
1000
23
0.12
2000
27
0.14
1000
35
0.12
2000
40
0.14
1000
120
0.12
2000
85
0.12
2000
65
0.12
2000
110
0.12
2000
105
0.12
2000
110
0.12
2000
130
0.12
2000
200
0.12
2000
250
0.12
2000
300
0.12
2000
40
0.18
2000
40
0.18
2000
45
0.18
2000
45
0.18
2000
45
0.18
2000
60
0.18
2000
50
0.18
2000
50
0.18
2000
85
0.18
2000
55
0.18
2000
85
0.18
2000
90
0.18
2000
Min. Packaging Q'ty
Part No.
EEE1HA010SR
EEE1HA2R2SR
EEE1HA3R3SR
EEE1HA4R7WR
EEE1HA4R7SR
EEE1HA100WR
EEE1HA100SP
EEE1HA220WP
EEE1HA220P
EEE1HA330XP
EEE1HA330UP
EEE1HA330P
EEE1HA470XP
EEE1HA470UP
EEE1HA470P
EEE1HA101UP
EEE1HA101P
EEE1HA221P
EEE1JA220UP
EEE1JA220P
EEE1JA330P
EEE1JA470UP
EEE1JA470P
EEE1JA101P
EEE2AA4R7UP
EEE2AA100UP
EEE2AA100P
EEE2AA220UP
EEE2AA220P
EEE2AA330P
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(2)
(1)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
2000
2000
2000
2000
1000
1000
1000
1000
1000
900
1000
500
900
500
500
500
500
500
1000
500
500
500
500
500
1000
1000
500
500
500
500
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list (Bi-polar)
Endurance : 85 °C 2000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
6.3
10
16
25
35
50
22
47
10
33
4.7
10
22
3.3
4.7
10
2.2
4.7
10
1
2.2
3.3
4.7
Min. Packaging Q'ty
Specification
0D
L
Size
code
5
6.3
4
6.3
4
5
6.3
4
5
6.3
4
5
6.3
4
5
5
6.3
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
C
D
B
D
B
C
D
B
C
D
B
C
D
B
C
C
D
Ripple
current
tan d
Endurance
(120 Hz) (120 Hz)
(hours)
(+85 °C) (+20 °C)
(mA r.m.s.)
29
0.52
2000
46
0.52
2000
25
0.40
2000
43
0.40
2000
20
0.32
2000
25
0.32
2000
39
0.32
2000
12
0.28
2000
21
0.28
2000
28
0.28
2000
12
0.24
2000
22
0.24
2000
30
0.24
2000
10
0.24
2000
16
0.24
2000
21
0.24
2000
31
0.24
2000
Part No.
EEE0JA220NR
EEE0JA470NP
EEE1AA100NR
EEE1AA330NP
EEE1CA4R7NR
EEE1CA100NR
EEE1CA220NP
EEE1EA3R3NR
EEE1EA4R7NR
EEE1EA100NP
EEE1VA2R2NR
EEE1VA4R7NR
EEE1VA100NP
EEE1HA010NR
EEE1HA2R2NR
EEENZ1H3R3R
EEE1HA4R7NP
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
1000
1000
2000
1000
2000
1000
1000
2000
1000
1000
2000
1000
1000
2000
1000
1000
1000
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Hight-temperature
Surface Mount Type
assuranceize
HA
Series : HA Type : V
↑
High temperature
S
Lead-Free reflow (suffix : A✽)
Features
● Endurance : 105 °C 1000
● Vibration-proof product is
● RoHS compliant
h
available upon request. (08 mm and larger)
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
–40 °C to +105 °C
6.3 V.DC to 50 V.DC
1 µF to 1500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
V.DC
6.3 10
16
25
35
50
Z(–25 °C)/Z(+20 °C)
4
3
2
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C)
8
6
4
4
3
3
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at
+20 °C, capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value
< 200 % of the initial limit
tan d
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
Frequency correction factor for ripple current
Frequency (Hz)
50, 60
120
1k
10 k to
Correction factor
0.70
1.00
1.30
1.70
Capacitance (µF)
22
j HA
L
Series identification
Mark for Lead-Free
products
(Black dot)
(P)
+
Lot number
10
16
25
35
50
A
C
E
V
H
Size
L
A, B
H
code 0D
B
4.0
5.4 +- 0.1
4.3 5.5 max.
0.2
C
5.0
5.4 +- 0.1
5.3 6.5 max.
0.2
D
6.3
5.4 +- 0.1
6.6 7.8 max.
0.2
D8
6.3 7.7±0.3 6.6 7.8 max.
E
8.0 6.2±0.3 8.3 9.5 max.
F
8.0 10.2±0.3 8.3 10.0 max.
G 10.0 10.2±0.3 10.3 12.0 max.
(I)
A±0.2
W
Pressure Relief (010 and larger)
Rated voltage code
R. Voltage
6.3
(V.DC)
Code
j
H
0D±0.5
Negative polarity
marking (–)
–
(I)
0.3 max.
Example : 6.3 V.DC 22 µF
Marking color : BLACK
K
Dimensions
B±0.2
Marking
( ) Reference size
(Unit : mm)
I
W
1.8
2.2
2.6
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
P
K
1.0 0.35 +- 0.15
0.20
1.5 0.35 +- 0.15
0.20
1.8 0.35 +- 0.15
0.20
1.8 0.35 +- 0.15
0.20
2.2 0.35 +- 0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 1000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
22
33
47
100
6.3
330
470
1000
1500
22
33
47
10
100
220
470
1000
10
22
33
47
100
16
220
330
470
680
✽
0D
L
Size
code
4
4
5
5
6.3
6.3
8
8
8
10
10
4
4
5
5
6.3
8
6.3
8
8
10
10
4
4
5
5
5
6.3
6.3
6.3
8
10
8
10
8
10
10
5.4
5.4
5.4
5.4
5.4
7.7
6.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
6.2
7.7
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
5.4
7.7
10.2
10.2
10.2
10.2
10.2
10.2
10.2
B
(B)
C
(C)
D
D8
(E)
F
(F)
G
(G)
(B)
(B)
C
(C)
(D)
E
D8
F
(F)
G
(G)
B
(B)
C
(C)
(C)
D
(D)
D8
(F)
G
(F)
G
(F)
G
(G)
Specification
Ripple
current
tan d
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
29
0.30
29
0.35
46
0.30
47
0.40
71
0.30
105
0.30
18 0
0.35
230
0.35
300
0.35
400
0.35
480
0.50
28
0.30
29
0.30
43
0.22
43
0.30
71
0.30
110
0.26
105
0.22
160
0.26
200
0.26
270
0.26
400
0.35
28
0.16
28
0.26
39
0.16
35
0.26
39
0.26
70
0.16
70
0.26
105
0.20
150
0.20
210
0.20
170
0.20
230
0.20
340
0.26
340
0.20
380
0.26
Min. Packaging Q'ty
Part No.
EEEHA0J220AR
EEEHAJ330WAR
EEEHA0J470AR
EEEHAJ101WAR
EEEHA0J101AP
EEEHAJ331XAP
EEEHAJ331UAP
EEEHA0J331AP
EEEHAJ471UAP
EEEHA0J102AP
EEEHAJ152UAP
EEEHAA220WAR
EEEHAA330WAR
EEEHA1A330AR
EEEHAA470WAR
EEEHAA101WAP
EEEHA1A101AP
EEEHAA221XAP
EEEHA1A221AP
EEEHAA471UAP
EEEHA1A471AP
EEEHAA102UAP
EEEHA1C100AR
EEEHAC220WAR
EEEHA1C220AR
EEEHAC330WAR
EEEHAC470WAR
EEEHA1C470AP
EEEHAC101WAP
EEEHAC221XAP
EEEHAC221UAP
EEEHA1C221AP
EEEHAC331UAP
EEEHA1C331AP
EEEHAC471UAP
EEEHA1C471AP
EEEHAC681UAP
Reflow
Taping
(pcs)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(7)
(5)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(7)
(7)
(7)
(7)
(7)
2000
2000
1000
1000
1000
900
500
500
500
500
500
2000
2000
1000
1000
1000
1000
900
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
900
500
500
500
500
500
500
500
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V, 1H → H
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 1000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
4.7
10
22
33
25
47
100
220
330
470
4.7
10
22
33
35
47
100
220
330
1
2.2
3.3
4.7
10
22
50
33
47
100
220
✽
0D
L
Size
code
4
4
5
5
6.3
5
6.3
6.3
8
8
6.3
8
8
10
8
10
10
4
4
5
5
6.3
6.3
8
8
8
6.3
8
10
8
10
10
4
4
4
5
6.3
8
6.3
8
8
6.3
8
10
8
10
10
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
6.2
7.7
10.2
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
6.2
6.2
10.2
7.7
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
6.2
7.7
6.2
10.2
7.7
10.2
10.2
10.2
10.2
10.2
B
(B)
C
(C)
D
(C)
D
(D)
E
(E)
D8
F
(F)
G
(F)
G
(G)
B
(B)
C
(C)
D
(D)
E
(E)
F
D8
(F)
G
(F)
G
(G)
B
B
B
C
D
E
D8
(E)
F
D8
(F)
G
(F)
G
(G)
Specification
Ripple
tan d
current
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
22
0.14
22
0.20
28
0.14
35
0.20
55
0.14
45
0.20
65
0.14
70
0.20
91
0.16
91
0.16
91
0.16
130
0.16
160
0.20
190
0.16
180
0.20
340
0.16
360
0.25
22
0.12
22
0.16
30
0.12
35
0.16
60
0.12
42
0.16
84
0.14
84
0.14
98
0.14
84
0.14
120
0.14
160
0.14
170
0.14
210
0.14
250
0.30
10
0.12
16
0.12
16
0.12
23
0.12
35
0.12
70
0.12
70
0.14
70
0.12
91
0.12
63
0.14
95
0.12
100
0.12
110
0.18
120
0.12
150
0.18
Min. Packaging Q'ty
Part No.
EEEHA1E4R7AR
EEEHAE100WAR
EEEHA1E100AR
EEEHAE220WAR
EEEHA1E220AP
EEEHAE330WAR
EEEHA1E330AP
EEEHAE470WAP
EEEHA1E470AP
EEEHAE101UAP
EEEHAE101XAP
EEEHA1E101AP
EEEHAE221UAP
EEEHA1E221AP
EEEHAE331UAP
EEEHA1E331AP
EEEHAE471UAP
EEEHA1V4R7AR
EEEHAV100WAR
EEEHA1V100AR
EEEHAV220WAR
EEEHA1V220AP
EEEHAV330WAP
EEEHA1V330AP
EEEHAV470UAP
EEEHA1V470AP
EEEHAV101XAP
EEEHAV101UAP
EEEHA1V101AP
EEEHAV221UAP
EEEHA1V221AP
EEEHAV331UAP
EEEHA1H1R0AR
EEEHA1H2R2AR
EEEHA1H3R3AR
EEEHA1H4R7AR
EEEHA1H100AP
EEEHA1H220AP
EEEHAH330XAP
EEEHAH330UAP
EEEHA1H330AP
EEEHAH470XAP
EEEHAH470UAP
EEEHA1H470AP
EEEHAH101UAP
EEEHA1H101AP
EEEHAH221UAP
Reflow
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(5)
(7)
(7)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(7)
(5)
(7)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(7)
(5)
(7)
(7)
(5)
(7)
(7)
(7)
(7)
(7)
Taping
(pcs)
2000
2000
1000
1000
1000
1000
1000
1000
1000
1000
900
500
500
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
1000
500
900
500
500
500
500
500
2000
2000
2000
1000
1000
1000
900
1000
500
900
500
500
500
500
500
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V, 1H → H
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Hight-temperature
assuranceize
Surface Mount Type
Series : HA Type : V
HA
↑
S
Features
● Endurance : 105 °C 1000
● Vibration-proof product is
● RoHS compliant
h
available upon request. (08 mm and larger)
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +105 °C
6.3 V.DC to 100 V.DC
1 µF to 1500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
V.DC
6.3 10
16
25
35
50
63 100
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 4
3
2
2
2
2
3
3
Z(–40 °C)/Z(+20 °C) 8
6
4
4
3
3
4
4
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±20 % of the initial value (6.3 V.DC of miniature : ±30 %)
< 200 % of the initial limit
tan d
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
50, 60
120
1k
10 k to
Correction factor
0.70
1.00
1.30
1.70
Capacitance (µF)
22
j HA
Mark for Lead-Free
products
(Black dot)
25
35
50
C
E
V
H
W
(I)
( ) Reference size
(Unit : mm)
Rated voltage code
16
+
Pressure Relief (010 and larger)
Series identification
Lot number
R. Voltage
6.3 10
(V.DC)
Code
j
A
L
A±0.2
(P)
Negative polarity
marking (–)
–
H
0D±0.5
0.3 max.
(I)
Example : 6.3 V.DC 22 µF
Marking color : BLACK
K
Dimensions
B±0.2
Marking
63 100
J
2A
Size
L
A, B
H
code 0D
4.3 5.5 max.
B
4.0
5.4 +- 0.1
0.2
C
5.0
5.4 +- 0.1
5.3 6.5 max.
0.2
D
6.3
5.4 +- 0.1
6.6 7.8 max.
0.2
D8
6.3 7.7±0.3 6.6 7.8 max.
E
8.0 6.2±0.3 8.3 9.5 max.
F
8.0 10.2±0.3 8.3 10.0 max.
G 10.0 10.2±0.3 10.3 12.0 max.
I
W
1.8
2.2
2.6
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
P
K
1.0 0.35 +- 0.15
0.20
1.5 0.35 +- 0.15
0.20
1.8 0.35 +- 0.15
0.20
1.8 0.35 +- 0.15
0.20
2.2 0.35 +- 0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 1000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
22
33
47
100
6.3
220
330
470
1000
1500
22
33
47
10
100
220
470
1000
10
22
33
47
100
16
220
330
470
680
✽
0D
L
Size
code
4
4
4
5
5
6.3
6.3
6.3
8
8
8
10
10
4
4
5
5
6.3
8
6.3
8
8
10
10
4
4
5
5
5
6.3
6.3
6.3
8
10
8
10
8
10
10
5.4
5.4
5.4
5.4
5.4
5.4
5.4
7.7
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
6.2
7.7
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
5.4
7.7
10.2
10.2
10.2
10.2
10.2
10.2
10.2
B
(B)
(B)
C
(C)
D
(D)
D8
F
(F)
(F)
G
G
(B)
(B)
C
(C)
(D)
E
D8
F
(F)
G
G
B
(B)
C
(C)
(C)
D
(D)
D8
(F)
G
(F)
G
(F)
G
G
Specification
Ripple
tan d
current
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
29
0.30
29
0.35
36
0.35
46
0.30
47
0.35
71
0.30
74
0.35
105
0.30
230
0.35
300
0.35
300
0.35
400
0.35
480
0.35
28
0.30
29
0.30
43
0.22
43
0.30
71
0.30
110
0.26
105
0.22
160
0.26
200
0.26
270
0.26
400
0.26
28
0.16
28
0.26
39
0.16
35
0.26
39
0.26
70
0.16
70
0.26
105
0.16
150
0.20
210
0.20
170
0.20
230
0.20
340
0.20
340
0.20
380
0.20
Min. Packaging Q'ty
Part No.
EEEHA0J220R
EEEHA0J330WR
EEEHA0J470WR
EEEHA0J470R
EEEHA0J101WR
EEEHA0J101P
EEEHA0J221WP
EEEHA0J331XP
EEEHA0J331P
EEEHA0J471UP
EEEHA0J102UP
EEEHA0J102P
EEEHA0J152P
EEEHA1A220WR
EEEHA1A330WR
EEEHA1A330R
EEEHA1A470WR
EEEHA1A101WP
EEEHA1A101P
EEEHA1A221XP
EEEHA1A221P
EEEHA1A471UP
EEEHA1A471P
EEEHA1A102P
EEEHA1C100R
EEEHA1C220WR
EEEHA1C220R
EEEHA1C330WR
EEEHA1C470WR
EEEHA1C470P
EEEHA1C101WP
EEEHA1C221XP
EEEHA1C221UP
EEEHA1C221P
EEEHA1C331UP
EEEHA1C331P
EEEHA1C471UP
EEEHA1C471P
EEEHA1C681P
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
2000
2000
2000
1000
1000
1000
1000
900
500
500
500
500
500
2000
2000
1000
1000
1000
1000
900
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
900
500
500
500
500
500
500
500
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 1000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
4.7
10
22
33
25
47
100
220
330
470
4.7
10
22
33
35
47
100
220
330
1
2.2
3.3
4.7
10
22
50
33
47
100
220
✽
0D
L
Size
code
4
4
5
5
6.3
5
6.3
6.3
8
6.3
8
8
8
10
8
10
10
4
4
5
5
6.3
6.3
8
8
8
6.3
8
10
8
10
10
4
4
4
5
6.3
8
6.3
8
8
6.3
8
10
8
10
10
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
7.7
6.2
10.2
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
6.2
6.2
10.2
7.7
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
6.2
7.7
6.2
10.2
7.7
10.2
10.2
10.2
10.2
10.2
B
(B)
C
(C)
D
(C)
D
(D)
E
D8
(E)
F
(F)
G
(F)
G
G
B
(B)
C
(C)
D
(D)
E
(E)
F
D8
(F)
G
(F)
G
G
B
B
B
C
D
E
D8
(E)
F
D8
(F)
G
(F)
G
G
Specification
Ripple
tan d
current
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
22
0.14
22
0.20
28
0.14
35
0.20
55
0.14
45
0.20
65
0.14
70
0.20
91
0.16
91
0.14
91
0.16
130
0.16
160
0.16
190
0.16
180
0.16
340
0.16
360
0.16
22
0.12
22
0.16
30
0.12
35
0.16
60
0.12
42
0.16
84
0.14
84
0.14
98
0.14
84
0.12
120
0.14
160
0.14
170
0.14
210
0.14
250
0.14
10
0.12
16
0.12
16
0.12
23
0.12
35
0.12
70
0.12
70
0.12
70
0.12
91
0.12
63
0.12
95
0.12
100
0.12
110
0.12
120
0.12
150
0.12
Min. Packaging Q'ty
Part No.
EEEHA1E4R7R
EEEHA1E100WR
EEEHA1E100R
EEEHA1E220WR
EEEHA1E220P
EEEHA1E330WR
EEEHA1E330P
EEEHA1E470WP
EEEHA1E470P
EEEHA1E101XP
EEEHA1E101UP
EEEHA1E101P
EEEHA1E221UP
EEEHA1E221P
EEEHA1E331UP
EEEHA1E331P
EEEHA1E471P
EEEHA1V4R7R
EEEHA1V100WR
EEEHA1V100R
EEEHA1V220WR
EEEHA1V220P
EEEHA1V330WP
EEEHA1V330P
EEEHA1V470UP
EEEHA1V470P
EEEHA1V101XP
EEEHA1V101UP
EEEHA1V101P
EEEHA1V221UP
EEEHA1V221P
EEEHA1V331P
EEEHA1H1R0R
EEEHA1H2R2R
EEEHA1H3R3R
EEEHA1H4R7R
EEEHA1H100P
EEEHA1H220P
EEEHA1H330XP
EEEHA1H330UP
EEEHA1H330P
EEEHA1H470XP
EEEHA1H470UP
EEEHA1H470P
EEEHA1H101UP
EEEHA1H101P
EEEHA1H221P
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(1)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(2)
(1)
(2)
(2)
(2)
(2)
(2)
2000
2000
1000
1000
1000
1000
1000
1000
1000
900
1000
500
500
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
1000
500
900
500
500
500
500
500
2000
2000
2000
1000
1000
1000
900
1000
500
900
500
500
500
500
500
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 1000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
10
22
63
33
47
4.7
10
100
22
33
47
✽
0D
L
Size
code
8
8
8
10
8
10
8
8
8
10
10
10
6.2
6.2
10.2
10.2
10.2
10.2
6.2
10.2
10.2
10.2
10.2
10.2
E
(E)
F
G
(F)
G
(E)
F
(F)
G
G
(G)
Specification
Ripple
tan d
current
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
25
0.18
25
0.18
30
0.18
45
0.18
45
0.18
50
0.18
30
0.18
55
0.18
55
0.18
60
0.18
65
0.18
65
0.18
Min. Packaging Q'ty
Part No.
EEEHA1J100P
EEEHA1J220UP
EEEHA1J220P
EEEHA1J330P
EEEHA1J470UP
EEEHA1J470P
EEEHA2A4R7UP
EEEHA2A100P
EEEHA2A220UP
EEEHA2A220P
EEEHA2A330P
EEEHA2A470UP
Reflow
Taping
(pcs)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
1000
1000
500
500
500
500
1000
500
500
500
500
500
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : HB Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● Endurance : 105 °C 2000 h
● Vibration-proof product is available
● RoHS compliant
upon request. (08 mm and larger)
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +105 °C
6.3 V.DC to 50 V.DC
1 µF to 1500 µF
±20 % (120 Hz/ +20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
V.DC
6.3 10 16 25 35 50
Z(–25 °C)/Z(+20 °C) 4
3
2
2
2
2
Standard
Z(–40 °C)/Z(+20 °C) 8
6
4
4
3
3 (Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 4
3
2
2
2
2
Miniaturization
product
Z(–40 °C)/Z(+20 °C) 10 8
6
6
4
4
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, capacitors shall meet the following limits.
Within ±20 % of the initial value (16 V.DC or less :
Capacitance change
Within ±25 %, Miniaturization product : Within ±35 %)
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
50, 60
120
1k
10 k to
Correction factor
0.70
1.00
1.30
1.70
22
j HB
L
Series identification
Mark for Lead-Free
products
(Black dot)
Rated voltage code
(P)
W
( )reference size
(Unit : mm)
Lot number
R. Voltage
6.3
(V.DC)
Code
j
+
Pressure Relief (010 and larger)
(I)
Capacitance (µF)
H
0D±0.5
Negative polarity
marking (–)
A±0.2
–
K
0.3 max.
Example : 6.3 V.DC 22 µF
Marking color : BLACK
(I)
Dimensions
B±0.2
Marking
10
16
25
35
50
A
C
E
V
H
Size
L
A, B
H
code 0D
B
4.0 5.8±0.3 4.3 5.5 max.
C
5.0 5.8±0.3 5.3 6.5 max.
D
6.3 5.8±0.3 6.6 7.8 max.
D8
6.3 7.7±0.3 6.6 7.8 max.
E
8.0 6.2±0.3 8.3 9.5 max.
F
8.0 10.2±0.3 8.3 10.0 max.
G 10.0 10.2±0.3 10.3 12.0 max.
I
W
1.8
2.2
2.6
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
P
K
1.0 0.35 +- 0.15
0.20
1.5 0.35 +- 0.15
0.20
1.8 0.35 +- 0.15
0.20
1.8 0.35 +- 0.15
0.20
2.2 0.35 +- 0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
22
33
47
100
6.3
220
330
470
1500
33
68
100
10
150
220
470
10
22
33
47
16
100
220
330
470
4.7
6.8
10
22
33
25
47
100
220
330
470
✽
0D
L
Size
code
4
4
4
5
5
6.3
6.3
8
8
8
8
10
4
5
6.3
6.3
8
6.3
8
8
8
10
4
4
5
6.3
5
6.3
6.3
6.3
8
8
10
10
8
10
4
4
4
5
6.3
5
6.3
6.3
8
8
8
8
10
8
10
10
5.8
5.8
5.8
5.8
5.8
5.8
5.8
10.2
6.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
6.2
5.8
6.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
5.8
5.8
7.7
5.8
10.2
10.2
10.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
5.8
5.8
5.8
5.8
6.2
6.2
10.2
10.2
10.2
10.2
10.2
10.2
B
B
(B)
C
(C)
D
(D)
F
(E)
F
(F)
(G)
(B)
C
D
(D)
E
(D)
(E)
F
(F)
G
B
(B)
C
D
(C)
D
D8
(D)
F
(F)
G
G
(F)
G
B
B
(B)
C
D
(C)
D
(D)
E
(E)
F
(F)
G
(F)
G
(G)
Specification
Ripple
tan d
current
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
26
0.30
29
0.30
26
0.50
46
0.30
42
0.50
71
0.30
80
0.50
150
0.35
180
0.50
230
0.35
230
0.50
290
0.50
23
0.30
43
0.26
70
0.22
71
0.30
110
0.26
64
0.50
110
0.30
160
0.26
220
0.35
270
0.26
28
0.16
29.5
0.26
39
0.16
65
0.16
39
0.26
70
0.16
84
0.16
70
0.26
120
0.20
150
0.20
210
0.20
230
0.20
240
0.40
340
0.20
22
0.14
25
0.14
28
0.16
28
0.14
55
0.14
50
0.20
65
0.14
65
0.20
91
0.16
100
0.16
130
0.16
130
0.30
190
0.16
130
0.30
220
0.16
230
0.30
Min. Packaging Q'ty
Part No.
Reflow
Taping
(pcs)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(7)
(5)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(7)
(7)
(7)
(7)
(7)
(7)
2000
2000
2000
1000
1000
1000
1000
500
1000
500
500
500
2000
1000
1000
1000
1000
1000
1000
500
500
500
2000
2000
1000
1000
1000
1000
900
1000
500
500
500
500
500
500
2000
2000
2000
1000
1000
1000
1000
1000
1000
1000
500
500
500
500
500
500
EEEHB0J220AR
EEEHB0J330AR
EEEHBJ470UAR
EEEHB0J470AR
EEEHBJ101UAR
EEEHB0J101AP
EEEHBJ221UAP
EEEHB0J221AP
EEEHBJ331UAP
EEEHB0J331AP
EEEHBJ471UAP
EEEHBJ152UAP
EEEHBA330UAR
EEEHB1A330AR
EEEHB1A680AP
EEEHBA101UAP
EEEHB1A101AP
EEEHBA151UAP
EEEHBA221UAP
EEEHB1A221AP
EEEHBA471UAP
EEEHB1A471AP
EEEHB1C100AR
EEEHBC220UAR
EEEHB1C220AR
EEEHB1C330AP
EEEHBC470UAR
EEEHB1C470AP
EEEHBC470XAP
EEEHBC101UAP
EEEHB1C101AP
EEEHBC221UAP
EEEHB1C221AP
EEEHB1C331AP
EEEHBC471UAP
EEEHB1C471AP
EEEHB1E4R7AR
EEEHB1E6R8AR
EEEHBE100UAR
EEEHB1E100AR
EEEHB1E220AP
EEEHBE330UAR
EEEHB1E330AP
EEEHBE470UAP
EEEHB1E470AP
EEEHBE101UAP
EEEHB1E101AP
EEEHBE221UAP
EEEHB1E221AP
EEEHBE331UAP
EEEHB1E331AP
EEEHBE471UAP
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
4.7
6.8
10
22
33
35
47
100
220
1
2.2
3.3
4.7
6.8
10
50
22
33
47
100
220
✽
0D
L
Size
code
4
4
5
6.3
8
6.3
8
8
8
10
10
4
4
4
5
5
6.3
6.3
8
8
6.3
8
10
10
10
5.8
5.8
5.8
5.8
6.2
7.7
6.2
10.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
5.8
5.8
5.8
6.2
10.2
7.7
10.2
10.2
10.2
10.2
B
(B)
C
D
E
D8
(E)
F
(F)
G
(G)
B
B
B
C
C
D
(D)
E
F
D8
(F)
G
(G)
(G)
Specification
Ripple
tan d
current
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
21
0.12
25
0.12
28
0.12
55
0.12
84
0.14
98
0.20
91
0.18
98
0.14
98
0.20
160
0.14
180
0.14
10
0.12
16
0.12
16
0.12
23
0.12
23
0.12
35
0.12
35
0.14
70
0.12
91
0.12
63
0.12
95
0.12
100
0.12
250
0.12
270
0.18
Min. Packaging Q'ty
Part No.
Reflow
Taping
(pcs)
(5)
(5)
(5)
(5)
(7)
(5)
(7)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(7)
(7)
(5)
(7)
(7)
(7)
(7)
2000
2000
1000
1000
1000
900
1000
500
500
500
500
2000
2000
2000
1000
1000
1000
1000
1000
500
900
500
500
500
500
EEEHB1V4R7AR
EEEHBV6R8UAR
EEEHB1V100AR
EEEHB1V220AP
EEEHB1V330AP
EEEHBV470YAP
EEEHBV470UAP
EEEHB1V470AP
EEEHBV101UAP
EEEHB1V101AP
EEEHBV221UAP
EEEHB1H1R0AR
EEEHB1H2R2AR
EEEHB1H3R3AR
EEEHB1H4R7AR
EEEHB1H6R8AR
EEEHB1H100AP
EEEHBH220UAP
EEEHB1H220AP
EEEHB1H330AP
EEEHBH470YAP
EEEHBH470UAP
EEEHB1H470AP
EEEHBH101UAP
EEEHBH221UAP
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Long life
Surface Mount Type
Series : HB Type : V
5.5 mm
max.
HB
↑
Low
profile
HA
Features
● Endurance: 105 °C 2000 h
● 5.8 mm height (< 06.3), 5.5 mm height max.
● Vibration-proof product is available upon request.
● RoHS compliant
(08 mm and larger)
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
–40 °C to +105 °C
4 V.DC to 50 V.DC
1 µF to 470 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes
(Whichever is greater)
Leakage current
(Bi-polar I < 0.02 CV or 6 (µA) after 2 minutes)
Dissipation factor (tan d)
Please see the attached characteristics list
V.DC
4
6.3 10
16
25
35
50
Characteristics
Z(–25 °C)/Z(+20 °C)
7
4
3
2
2
2
2
(Impedance ratio at 120 Hz)
at low temperature
Z(–40 °C)/Z(+20 °C) 15
8
6
4
4
3
3
After applying rated working voltage for 2000 hours (Bi-polar : 1000 hours for each polarity) at
+105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits.
Capacitance change Within ±20 % of the initial value (4 V.DC : ±35 % 6.3 V.DC : ±25 % 04 to 06.3), 5.5 mm max. : ±25 %
Endurance
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
Shelf life
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20°C, capacitors shall meet the following limits.
Resistance to
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
soldering heat
DC leakage current Within the initial limit
AEC-Q200
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
0.70
10 k to
1.70
0.3 max.
Mark for Lead-Free
products
(Black dot)
Rated Voltage code
4
6.3
10
16
25
35
50
g
j
A
C
E
V
H
(P)
(I)
W
Pressure Relief (010 and larger)
Series identification
(HP : Bi-polar)
(BS : 5.5 mm max.)
Lot number
+
L
Capacitance (µF)
A±0.2
B±0.2
H
0D±0.5
Negative polarity marking (–)
(No marking for the bi-polar)
47
g HB
–
(I)
Dimensions
Example : 4 V.DC 47 µF
Marking color : BLACK
R. Voltage
(V.DC)
Code
1k
1.30
K
Marking
120
1.00
( ) Reference size
(Unit : mm)
Size
L
A, B
code 0D
B
4.0 5.8±0.3 4.3
C
5.0 5.8±0.3 5.3
D
6.3 5.8±0.3 6.6
E
8.0 6.2±0.3 8.3
F
8.0 10.2±0.3 8.3
G 10.0 10.2±0.3 10.3
H
I
W
P
K
5.5 max.
6.5 max.
7.8 max.
9.5 max.
10.0 max.
12.0 max.
1.8
2.2
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.0
1.5
1.8
2.2
3.1
4.6
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.70±0.20
0.70±0.20
● 5.5
Size
code
B
C
D
P
K
mm height max.
0D
L
A, B
H
I
W
4.0
5.0
6.3
5.4+- 0.1
0.2
5.4+- 0.1
0.2
5.4+- 0.1
0.2
4.3
5.3
6.6
5.5 max.
6.5 max.
7.8 max.
1.8
2.2
2.6
0.65±0.1
0.65±0.1
0.65±0.1
1.0 0.35 +- 0.15
0.20
1.5 0.35 +- 0.15
0.20
1.8 0.35 +- 0.15
0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
4
6.3
10
16
50
Size
code
47
4
5.8
B
5
5.8
C
61
Min. Packaging Q'ty
Part No.
Reflow
Taping
(pcs)
EEEHB0G470R
(1)
2000
0.50
EEEHB0G101R
(1)
1000
150
6.3
5.8
D
82
0.50
EEEHB0G151P
(1)
1000
220
6.3
5.8
D
82
0.50
EEEHB0G221P
(1)
1000
22
4
5.8
B
26
0.30
EEEHB0J220R
(1)
2000
33
4
5.8
B
29
0.30
EEEHB0J330R
(1)
2000
5
5.8
C
46
0.30
EEEHB0J470R
(1)
1000
100
47
6.3
5.8
D
71
0.30
EEEHB0J101P
(1)
1000
220
8
10.2
F
150
0.35
EEEHB0J221P
(2)
500
330
8
10.2
F
230
0.35
EEEHB0J331P
(2)
500
33
5
5.8
C
43
0.22
EEEHB1A330R
(1)
1000
100
8
6.2
E
110
0.26
EEEHB1A101P
(2)
1000
220
8
10.2
F
160
0.26
EEEHB1A221P
(2)
500
470
10
10.2
G
270
0.26
EEEHB1A471P
(2)
500
10
4
5.8
B
28
0.16
EEEHB1C100R
(1)
2000
22
5
5.8
C
39
0.16
EEEHB1C220R
(1)
1000
47
6.3
5.8
D
70
0.16
EEEHB1C470P
(1)
1000
100
8
10.2
F
120
0.20
EEEHB1C101P
(2)
500
220
10
10.2
G
210
0.20
EEEHB1C221P
(2)
500
330
10
10.2
G
230
0.20
EEEHB1C331P
(2)
500
4
5.8
B
22
0.14
EEEHB1E4R7R
(1)
2000
6.8
35
L
100
4.7
25
0D
Specification
Ripple
current
tan d
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
34
0.50
4
5.8
B
25
0.14
EEEHB1E6R8R
(1)
2000
33
6.3
5.8
D
65
0.14
EEEHB1E330P
(1)
1000
47
8
6.2
E
91
0.16
EEEHB1E470P
(2)
1000
100
8
10.2
F
130
0.16
EEEHB1E101P
(2)
500
220
10
10.2
G
190
0.16
EEEHB1E221P
(2)
500
10
5
5.8
C
28
0.12
EEEHB1V100R
(1)
1000
22
6.3
5.8
D
55
0.12
EEEHB1V220P
(1)
1000
33
8
6.2
E
84
0.14
EEEHB1V330P
(2)
1000
47
8
10.2
F
98
0.14
EEEHB1V470P
(2)
500
100
10
10.2
G
160
0.14
EEEHB1V101P
(2)
500
1
4
5.8
B
10
0.12
EEEHB1H1R0R
(1)
2000
2.2
4
5.8
B
16
0.12
EEEHB1H2R2R
(1)
2000
3.3
4
5.8
B
16
0.12
EEEHB1H3R3R
(1)
2000
4.7
5
5.8
C
23
0.12
EEEHB1H4R7R
(1)
1000
6.8
10
5
5.8
C
23
0.12
EEEHB1H6R8R
(1)
1000
6.3
5.8
D
35
0.12
EEEHB1H100P
(1)
1000
22
8
6.2
E
70
0.12
EEEHB1H220P
(2)
1000
33
8
10.2
F
91
0.12
EEEHB1H330P
(2)
500
47
10
10.2
G
100
0.12
EEEHB1H470P
(2)
500
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list (Bi-polar)
Endurance : 105 °C 2000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
6.3
10
16
25
35
50
0D
L
Size
code
Specification
Ripple
tan d
current
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
35
0.60
Min. Packaging Q'ty
Part No.
Reflow
Taping
(pcs)
47
6.3
5.8
D
EEEHP0J470P
(1)
1000
10
4
5.8
B
20
0.44
EEEHP1A100R
(1)
2000
33
6.3
5.8
D
26
0.44
EEEHP1A330P
(1)
1000
10
5
5.8
C
25
0.32
EEEHP1C100R
(1)
1000
3.3
4
5.8
B
12
0.28
EEEHP1E3R3R
(1)
2000
4.7
4
5.8
B
12
0.28
EEEHP1E4R7R
(1)
2000
10
6.3
5.8
D
28
0.28
EEEHP1E100P
(1)
1000
22
6.3
5.8
D
55
0.28
EEEHP1E220P
(1)
1000
2.2
4
5.8
B
10
0.24
EEEHP1V2R2R
(1)
2000
1
4
5.8
B
10
0.24
EEEHP1H1R0R
(1)
2000
3.3
6.3
5.8
D
16
0.24
EEEHP1H3R3P
(1)
1000
4.7
6.3
5.8
D
23
0.24
EEEHP1H4R7P
(1)
1000
Characteristics list (5.5 mm max.)
Endurance : 105 °C 2000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
6.3
0D
L
Size
code
22
4
5.4
B
47
5
5.4
C
100
Specification
Ripple
current
tan d
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
26
0.30
Min. Packaging Q'ty
Part No.
Reflow
Taping
(pcs)
EEEHB0J220SR
(1)
2000
46
0.30
EEEHB0J470SR
(1)
1000
6.3
5.4
D
71
0.30
EEEHB0J101SP
(1)
1000
10
33
5
5.4
C
43
0.22
EEEHB1A330SR
(1)
1000
10
4
5.4
B
28
0.16
EEEHB1C100SR
(1)
2000
16
22
5
5.4
C
39
0.16
EEEHB1C220SR
(1)
1000
47
6.3
5.4
D
70
0.16
EEEHB1C470SP
(1)
1000
25
35
50
4.7
4
5.4
B
22
0.14
EEEHB1E4R7SR
(1)
2000
6.8
4
5.4
B
25
0.14
EEEHB1E6R8SR
(1)
2000
33
6.3
5.4
D
65
0.14
EEEHB1E330SP
(1)
1000
10
5
5.4
C
28
0.12
EEEHB1V100SR
(1)
1000
22
6.3
5.4
D
55
0.12
EEEHB1V220SP
(1)
1000
1
4
5.4
B
10
0.12
EEEHB1H1R0SR
(1)
2000
2.2
4
5.4
B
16
0.12
EEEHB1H2R2SR
(1)
2000
3.3
4
5.4
B
16
0.12
EEEHB1H3R3SR
(1)
2000
4.7
5
5.4
C
23
0.12
EEEHB1H4R7SR
(1)
1000
6.8
5
5.4
C
23
0.12
EEEHB1H6R8SR
(1)
1000
6.3
5.4
D
35
0.12
EEEHB1H100SP
(1)
1000
10
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Long life
Surface Mount Type
Series : HC Type : V
HC
↑
HB
Features
● Endurance
: 105 °C 3000 h to 5000 h
product is available upon request. (08 mm and larger)
● RoHS compliant
● Vibration-proof
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +105 °C
6.3 V.DC to 50 V.DC
1 µF to 1000 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
After applying rated working voltage for +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
04 to 06.3 (3000 hours After applying rated working voltage)
08 to 010 (5000 hours After applying rated working voltage)
Capacitance change Within ±30 % of the initial value
tan d
< 300 % of the initial limit
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C ±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
50, 60
120
1k
10 k to
Correction factor
0.70
1.00
1.30
1.70
Capacitance (µF)
22
j HC
Lot number
R. Voltage
6.3
(V.DC)
Code
j
L
+
W
Pressure Relief (010 and larger)
Series identification
Mark for Lead-Free
products
(Black dot)
(I)
A±0.2
(P)
Negative polarity
marking (–)
–
H
0D±0.5
0.3 max.
(I)
Example : 6.3 V.DC 22 µF
Marking color : BLACK
K
Dimensions
B±0.2
Marking
( ) Reference size
(Unit : mm)
Rated voltage code
10
16
25
35
50
A
C
E
V
H
Size
L
A, B
H
code 0D
B
4.0 5.8±0.3 4.3 5.5 max.
C
5.0 5.8±0.3 5.3 6.5 max.
D
6.3 5.8±0.3 6.6 7.8 max.
D8
6.3 7.7±0.3 6.6 7.8 max.
F
8.0 10.2±0.3 8.3 10.0 max.
G 10.0 10.2±0.3 10.3 12.0 max.
I
W
P
K
1.8
2.2
2.6
2.6
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.0
1.5
1.8
1.8
3.1
4.6
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.70±0.2
0.70±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 3000 h (08, 010 : 5000 h)
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
6.3
10
16
25
35
50
22
47
100
220
330
1000
33
220
10
22
47
100
470
33
47
100
330
4.7
10
22
33
220
1
2.2
3.3
4.7
10
22
33
47
100
0D
L
Size
code
4
5
6.3
6.3
8
10
5
8
4
5
6.3
6.3
10
6.3
6.3
8
10
4
5
6.3
6.3
10
4
4
4
5
6.3
6.3
8
8
10
5.8
5.8
5.8
7.7
10.2
10.2
5.8
10.2
5.8
5.8
5.8
7.7
10.2
5.8
7.7
10.2
10.2
5.8
5.8
5.8
7.7
10.2
5.8
5.8
5.8
5.8
5.8
7.7
10.2
10.2
10.2
B
C
D
D8
F
G
C
F
B
C
D
D8
G
D
D8
F
G
B
C
D
D8
G
B
B
B
C
D
D8
F
F
G
Specification
Ripple
tan d
current
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
26
0.30
46
0.30
71
0.30
101
0.30
230
0.30
313
0.50
43
0.26
160
0.26
28
0.20
39
0.20
70
0.20
81
0.20
340
0.20
65
0.16
65
0.16
130
0.16
238
0.16
15
0.14
28
0.14
55
0.14
57
0.14
220
0.14
10
0.12
16
0.12
16
0.12
23
0.12
35
0.12
49
0.12
91
0.12
100
0.12
160
0.12
Min. Packaging Q'ty
Part No.
EEEHC0J220R
EEEHC0J470R
EEEHC0J101P
EEEHC0J221XP
EEEHC0J331P
EEEHC0J102P
EEEHC1A330R
EEEHC1A221P
EEEHC1C100R
EEEHC1C220R
EEEHC1C470P
EEEHC1C101XP
EEEHC1C471P
EEEHC1E330P
EEEHC1E470XP
EEEHC1E101P
EEEHC1E331P
EEEHC1V4R7R
EEEHC1V100R
EEEHC1V220P
EEEHC1V330XP
EEEHC1V221P
EEEHC1H1R0R
EEEHC1H2R2R
EEEHC1H3R3R
EEEHC1H4R7R
EEEHC1H100P
EEEHC1H220XP
EEEHC1H330P
EEEHC1H470P
EEEHC1H101P
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(2)
(2)
(1)
(2)
(1)
(1)
(1)
(1)
(2)
(1)
(1)
(2)
(2)
(1)
(1)
(1)
(1)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
2000
1000
1000
900
500
500
1000
500
2000
1000
1000
900
500
1000
900
500
500
2000
1000
1000
900
500
2000
2000
2000
1000
1000
900
500
500
500
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : HD Type : V
❈ 6.3 V.DC to 35 V.DC : High temperature Lead-Free reflow (suffix : A✽)
50 V.DC to 100 V.DC : Standard Lead-Free reflow
Features
● Endurance
: 105 °C 5000 h
is available upon request. (08 mm and larger)
● Vibration-proof product
● RoHS compliant
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +105 °C
6.3 V.DC to 100 V.DC
1 µF to 1000 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
V.DC
6.3 10 16 25 35 50 63 100
Z(–25 °C)/Z(+20 °C)
3
3
2
2
2
2
2
2 (Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C)
4
4
3
3
3
3
3
3
After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value
< 300 % of the initial limit
tan d
DC leakage current < initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Capacitance change Within ±20 % of the initial value
< 200 % of the initial limit
tan d
DC leakage current Within the initial limit
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
0.70
1k
1.30
10 k to
1.70
0.3 max.
Capacitance (µF)
Lot number
35
50
C
E
V
H
(P)
B±0.2
( ) Reference size
(Unit : mm)
Mark for Lead-Free
products
(Black dot)
25
W
Pressure Relief (010 and larger)
Series identification
16
+
L
Rated voltage code
R. Voltage
6.3 10
(V.DC)
Code
j
A
H
0D±0.5
Negative polarity
marking (–)
330
j HD
A±0.2
–
K
Example : 6.3 V.DC 330 µF
Marking color : BLACK
(I)
Dimensions
(I)
Marking
120
1.00
63 100
J
2A
Size
L
A, B
code 0D
B
4.0 5.8±0.3 4.3
C
5.0 5.8±0.3 5.3
D
6.3 5.8±0.3 6.6
D8
6.3 7.7±0.3 6.6
E
8.0 6.2±0.3 8.3
F
8.0 10.2±0.3 8.3
G 10.0 10.2±0.3 10.3
H
I
W
P
K
5.5 max.
6.5 max.
7.8 max.
7.8 max.
9.5 max.
10.0 max.
12.0 max.
1.8
2.2
2.6
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.0
1.5
1.8
1.8
2.2
3.1
4.6
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.70±0.20
0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list (6.3 V.DC to 35 V.DC)
Endurance : 105 °C 5000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
6.3
10
16
25
35
330
1000
100
220
330
10
22
47
100
220
470
4.7
10
22
33
47
100
330
4.7
10
22
33
47
100
220
Min. Packaging Q'ty
Specification
0D
L
Size
code
8
10
8
8
8
4.0
5.0
6.3
8
10
10
4
5
6.3
6.3
8
8
10
4
5
6.3
8
6.3
6.3
8
10
10
10.2
10.2
6.2
10.2
10.2
5.8
5.8
5.8
10.2
10.2
10.2
5.8
5.8
5.8
5.8
6.2
10.2
10.2
5.8
5.8
5.8
6.2
7.7
7.7
10.2
10.2
10.2
F
G
E
F
F
B
C
D
F
G
G
B
C
D
D
E
F
G
B
C
D
E
D8
D8
F
G
G
Ripple
Impedance
tan d
current
Part No.
(100 kHz)
(120 Hz)
(120 Hz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
230
1.5
0.30
EEEHD0J331AP
313
0.8
0.50
EEEHD0J102AP
62
2.0
0.30
EEEHD1A101AP
160
1.5
0.30
EEEHD1A221AP
160
1.5
0.30
EEEHD1A331AP
28
12.0
0.20
EEEHD1C100AR
39
7.2
0.20
EEEHD1C220AR
70
4.0
0.20
EEEHD1C470AP
130
1.5
0.20
EEEHD1C101AP
220
0.8
0.20
EEEHD1C221AP
340
0.8
0.20
EEEHD1C471AP
17
12.0
0.16
EEEHD1E4R7AR
28
7.2
0.16
EEEHD1E100AR
55
4.0
0.16
EEEHD1E220AP
55
4.0
0.16
EEEHD1E330AP
56
2.0
0.18
EEEHD1E470AP
130
1.5
0.16
EEEHD1E101AP
238
0.8
0.16
EEEHD1E331AP
17
12.0
0.13
EEEHD1V4R7AR
28
7.2
0.13
EEEHD1V100AR
55
4.0
0.13
EEEHD1V220AP
53
2.0
0.16
EEEHD1V330AP
57
2.0
0.13
EEEHDV330XAP
57
2.0
0.14
EEEHDV470XAP
79
1.5
0.14
EEEHD1V470AP
101
0.8
0.14
EEEHD1V101AP
220
0.8
0.14
EEEHD1V221AP
Reflow
Taping
(pcs)
(7)
(7)
(7)
(7)
(7)
(5)
(5)
(5)
(7)
(7)
(7)
(5)
(5)
(5)
(5)
(7)
(7)
(7)
(5)
(5)
(5)
(7)
(5)
(5)
(7)
(7)
(7)
500
500
1000
500
500
2000
1000
1000
500
500
500
2000
1000
1000
1000
1000
500
500
2000
1000
1000
1000
900
900
500
500
500
Characteristics list (50 V.DC to 100 V.DC)
Endurance : 105 °C 5000 h
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
50
63
100
1
2.2
3.3
4.7
10
22
33
47
100
10
22
33
10
22
0D
L
Size
code
4
4
4
5
6.3
8
8
10
10
8
8
10
8
10
5.8
5.8
5.8
5.8
5.8
6.2
10.2
10.2
10.2
6.2
10.2
10.2
10.2
10.2
B
B
B
C
D
E
F
G
G
E
F
G
F
G
Ripple
Impedance
tan d
current
Part No.
(100 kHz)
(120 Hz)
(120 Hz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
7
12.0
0.12
EEEHD1H1R0R
12
12.0
0.12
EEEHD1H2R2R
16
12.0
0.12
EEEHD1H3R3R
21
7.2
0.12
EEEHD1H4R7R
33
4.0
0.12
EEEHD1H100P
50
2.0
0.14
EEEHD1H220P
74
1.5
0.14
EEEHD1H330P
94
0.8
0.14
EEEHD1H470P
94
0.8
0.14
EEEHD1H101P
45
2.0
0.18
EEEHD1J100P
65
1.5
0.18
EEEHD1J220P
80
0.8
0.18
EEEHD1J330P
55
1.5
0.18
EEEHD2A100P
70
0.8
0.18
EEEHD2A220P
Min. Packaging Q'ty
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
2000
2000
2000
1000
1000
1000
500
500
500
1000
500
500
500
500
If Part number exceeds 12 digits, voltage code is abbrevi ated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V,
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : Medium-size HD Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● Endurance
: 105 °C 5000 h
product is available upon request.
● RoHS compliant
● Vibration-proof
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Endurance
Shelf life
–55 °C to +105 °C
6.3 V.DC to 35 V.DC
680 µF to 7500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (µA) After 2 minutes
Please see the attached characteristics list
After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Resistance to
soldering heat
AEC-Q200
Frequency correction factor for ripple current
Frequency (Hz)
Capacitance (µF)
680
to
1200
to
2700
to
1000
2200
7500
60
120
1k
10 k
100 k to
0.93
0.94
0.94
1.00
1.00
1.00
1.20
1.13
1.12
1.27
1.19
1.18
1.33
1.25
1.18
Capacitance (µF)
3300
j HD
Series identification
L
Pressure Relief
Mark for Lead-Free
products
(Black dot)
Rated voltage code
+
W
( ) Reference size
(Unit : mm)
Lot number
R. Voltage
(V.DC)
Code
A±0.2
B±0.2
0D±0.5
Negative polarity
marking (–)
H
–
K
0.3 max.
(P)
Example : 6.3 V.DC 3300 µF
Marking color : BLACK
(I)
Dimensions
(I)
Marking
6.3
10
16
25
35
j
A
C
E
V
Size
L
A,B
H
I
W
P
K
code 0D
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3
J16 16.0 16.5±0.5 17.0 19.0 max 5.5 1.20±0.3 6.7 0.70±0.3
K16 18.0 16.5±0.5 19.0 21.0 max 6.7 1.20±0.3 6.7 0.70±0.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 5000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(µF)
6.3
10
16
25
35
3300
6800
7500
2200
4700
6800
1500
3300
4700
1000
2200
3300
680
1500
1800
0D
L
Size
code
12.5
16
18
12.5
16
18
12.5
16
18
12.5
16
18
12.5
16
18
13.5
16.5
16.5
13.5
16.5
16.5
13.5
16.5
16.5
13.5
16.5
16.5
13.5
16.5
16.5
H13
J16
K16
H13
J16
K16
H13
J16
K16
H13
J16
K16
H13
J16
K16
Specification
Ripple
tan d
current
(120 Hz) (120 Hz)
(+105 °C) (+20 °C)
(mA r.m.s.)
680
0.32
1280
0.38
1540
0.40
620
0.24
1280
0.28
1540
0.32
620
0.18
1280
0.22
1540
0.24
580
0.16
1200
0.18
1540
0.20
580
0.14
1200
0.16
1450
0.16
Min. Packaging Q'ty
Part No.
EEEHD0J332AQ
EEEHD0J682AM
EEEHD0J752AM
EEEHD1A222AQ
EEEHD1A472AM
EEEHD1A682AM
EEEHD1C152AQ
EEEHD1C332AM
EEEHD1C472AM
EEEHD1E102AQ
EEEHD1E222AM
EEEHD1E332AM
EEEHD1V681AQ
EEEHD1V152AM
EEEHD1V182AM
Reflow
Taping
(pcs)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
200
125
125
200
125
125
200
125
125
200
125
125
200
125
125
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P” or “M”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Low impedance
Surface Mount Type
Series : FC Type : V
High temperature
Lead-Free reflow (suffix : A✽)
FC
↑
HA
Features
● Endurance : 105 °C 1000 h
● Low impedance (1/2 for HA series)
● Vibration-proof product is available
● RoHS compliant
upon request. (08 mm and larger)
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +105 °C
6.3 V.DC to 35 V.DC
1 µF to 1500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
V.DC
6.3
10
16
25
35
Z(–25 °C) / Z(+20 °C)
2
2
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C) / Z(+20 °C)
3
3
3
3
3
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change Within ±20 % of the initial value
< 200 % of the initial limit
tan d
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
0.70
1k
0.90
10 k
0.95
Capacitance (µF)
22
j FC
L
Series identification
K
A±0.2
(P)
+
(I)
Negative polarity
marking (–)
–
H
0D±0.5
0.3 max.
W
Pressure Relief (010 and larger)
Mark for Lead-Free
products
(Black dot)
(I)
Dimensions
Example : 6.3 V.DC 22 µF
Marking color : BLACK
( ) Reference size
(Unit : mm)
Rated voltage code
Lot number
R. Voltage
(V.DC)
Code
100 k to
1.00
B±0.2
Marking
120
0.75
6.3
10
16
25
35
j
A
C
E
V
Size
L
A, B
H
code 0D
+0.1
4.3 5.5 max.
B
4.0 5.4 -0.2
5.3 6.5 max.
C
5.0 5.4 +0.1
-0.2
6.6 7.8 max.
D
6.3 5.4 +0.1
-0.2
E
8.0 6.2±0.3 8.3 9.5 max.
F
8.0 10.2±0.3 8.3 10.0 max.
G
10.0 10.2±0.3 10.3 12.0 max.
I
W
P
K
1.8
2.2
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.0
1.5
1.8
2.2
3.1
4.6
0.35 +0.15
-0.20
0.35 +0.15
-0.20
0.35 +0.15
-0.20
0.35 +0.15
-0.20
0.70±0.2
0.70±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 1000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
6.3
10
16
25
35
22
47
68
100
220
330
1000
1500
33
100
150
220
470
1000
10
22
47
68
100
220
330
470
680
6.8
22
33
47
68
100
220
330
470
1
2.2
3.3
4.7
6.8
10
22
33
47
100
220
330
0D
L
Size
code
4
5
6.3
6.3
8
8
10
10
5
8
8
8
10
10
4
5
6.3
8
8
10
10
10
10
4
6.3
6.3
8
8
8
10
10
10
4
4
4
4
5
5
6.3
8
8
10
10
10
5.4
5.4
5.4
5.4
6.2
10.2
10.2
10.2
5.4
6.2
6.2
10.2
10.2
10.2
5.4
5.4
5.4
6.2
6.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
6.2
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
6.2
10.2
10.2
10.2
B
C
D
D
E
F
G
G
C
E
E
F
G
G
B
C
D
E
E
G
G
G
G
B
D
D
E
F
F
G
G
G
B
B
B
B
C
C
D
E
E
G
G
G
Specification
Ripple
Impedance
tan d
current
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
60
3.00
0.26
95
1.80
0.26
140
1.00
0.26
140
1.00
0.26
230
0.40
0.26
450
0.30
0.26
670
0.15
0.26
670
0.15
0.26
95
1.80
0.19
230
0.40
0.19
230
0.40
0.19
450
0.30
0.19
670
0.15
0.19
670
0.15
0.19
60
3.00
0.16
95
1.80
0.16
140
1.00
0.16
230
0.40
0.16
230
0.40
0.16
670
0.15
0.16
670
0.15
0.16
670
0.15
0.16
670
0.15
0.16
60
3.00
0.14
140
1.00
0.14
140
1.00
0.14
230
0.40
0.14
450
0.30
0.14
450
0.30
0.14
670
0.15
0.14
670
0.15
0.14
670
0.15
0.14
60
3.00
0.12
60
3.00
0.12
60
3.00
0.12
60
3.00
0.12
95
1.80
0.12
95
1.80
0.12
140
1.00
0.12
230
0.40
0.12
230
0.40
0.12
670
0.15
0.12
670
0.15
0.12
670
0.15
0.12
Min. Packaging Q'ty
Part No.
Reflow
EEEFC0J220AR
EEEFC0J470AR
EEEFC0J680AP
EEEFC0J101AP
EEEFC0J221AP
EEEFC0J331AP
EEEFC0J102AP
EEEFC0J152AP
EEEFC1A330AR
EEEFC1A101AP
EEEFC1A151AP
EEEFC1A221AP
EEEFC1A471AP
EEEFC1A102AP
EEEFC1C100AR
EEEFC1C220AR
EEEFC1C470AP
EEEFC1C680AP
EEEFC1C101AP
EEEFC1C221AP
EEEFC1C331AP
EEEFC1C471AP
EEEFC1C681AP
EEEFC1E6R8AR
EEEFC1E220AP
EEEFC1E330AP
EEEFC1E470AP
EEEFC1E680AP
EEEFC1E101AP
EEEFC1E221AP
EEEFC1E331AP
EEEFC1E471AP
EEEFC1V1R0AR
EEEFC1V2R2AR
EEEFC1V3R3AR
EEEFC1V4R7AR
EEEFC1V6R8AR
EEEFC1V100AR
EEEFC1V220AP
EEEFC1V330AP
EEEFC1V470AP
EEEFC1V101AP
EEEFC1V221AP
EEEFC1V331AP
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(5)
(6)
(6)
(6)
(6)
(6)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(6)
(6)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(6)
Taping
(pcs)
2000
1000
1000
1000
1000
500
500
500
1000
1000
1000
500
500
500
2000
1000
1000
1000
1000
500
500
500
500
2000
1000
1000
1000
500
500
500
500
500
2000
2000
2000
2000
1000
1000
1000
1000
1000
500
500
500
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Low impedance
Surface Mount Type
Series : FC Type : V
FC
↑
HA
Features
● Endurance : 105 °C 1000 h
● Low impedance (1/2 for HA series)
● Vibration-proof product is available
● RoHS compliant
upon request. (08 mm and larger)
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +105 °C
6.3 V.DC to 50 V.DC
1 µF to 1500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
V.DC
6.3
10
16
25
35
50
Z(–25 °C) / Z(+20 °C)
2
2
2
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C) / Z(+20 °C)
3
3
3
3
3
3
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change Within ±20 % of the initial value
< 200 % of the initial limit
tan d
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
50, 60
120
1k
10 k
100 k to
Correction factor
0.70
0.75
0.90
0.95
1.00
Capacitance (µF)
22
j FC
L
Series identification
Mark for Lead-Free
products
(Black dot)
Rated voltage code
(P)
W
Pressure Relief (010 and larger)
( ) Reference size
(Unit : mm)
Lot number
R. Voltage
6.3
(V.DC)
Code
j
+
(I)
Negative polarity
marking (–)
A±0.2
–
H
0D±0.5
0.3 max.
K
Example : 6.3 V.DC 22 µF
Marking color : BLACK
(I)
Dimensions
B±0.2
Marking
10
16
25
35
50
A
C
E
V
H
Size
L
A, B
H
code 0D
+ 0.1
4.3 5.5 max.
B
4.0 5.4 - 0.2
C
5.0 5.4 +- 0.1
5.3 6.5 max.
0.2
D
6.3 5.4 +- 0.1
6.6 7.8 max.
0.2
E
8.0 6.2±0.3 8.3 9.5 max.
F
8.0 10.2±0.3 8.3 10.0 max.
G 10.0 10.2±0.3 10.3 12.0 max.
I
W
P
K
1.8
2.2
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.0
1.5
1.8
2.2
3.1
4.6
0.35+- 0.15
0.20
0.35+- 0.15
0.20
0.35+- 0.15
0.20
0.35+- 0.15
0.20
0.70±0.2
0.70±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 1000 h
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
6.3
10
16
25
35
50
22
47
68
100
220
330
1000
1500
33
100
150
220
470
1000
10
22
47
68
100
220
330
470
680
6.8
22
33
47
68
100
220
330
470
1
2.2
3.3
4.7
6.8
10
22
33
47
100
220
330
1
2.2
3.3
4.7
10
22
33
47
100
220
0D
L
Size
code
4
5
6.3
6.3
8
8
10
10
5
8
8
8
10
10
4
5
6.3
8
8
10
10
10
10
4
6.3
6.3
8
8
8
10
10
10
4
4
4
4
5
5
6.3
8
8
10
10
10
4
4
4
5
6.3
8
8
10
10
10
5.4
5.4
5.4
5.4
6.2
10.2
10.2
10.2
5.4
6.2
6.2
10.2
10.2
10.2
5.4
5.4
5.4
6.2
6.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
6.2
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
6.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
6.2
10.2
10.2
10.2
10.2
B
C
D
D
E
F
G
G
C
E
E
F
G
G
B
C
D
E
E
G
G
G
G
B
D
D
E
F
F
G
G
G
B
B
B
B
C
C
D
E
E
G
G
G
B
B
B
C
D
E
F
G
G
G
Ripple
Impedance
tan d
current
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
60
3.00
0.26
95
1.80
0.26
140
1.00
0.26
140
1.00
0.26
230
0.40
0.26
450
0.30
0.26
670
0.15
0.26
670
0.15
0.26
95
1.80
0.19
230
0.40
0.19
230
0.40
0.19
450
0.30
0.19
670
0.15
0.19
670
0.15
0.19
60
3.00
0.16
95
1.80
0.16
140
1.00
0.16
230
0.40
0.16
230
0.40
0.16
670
0.15
0.16
670
0.15
0.16
670
0.15
0.16
670
0.15
0.16
60
3.00
0.14
140
1.00
0.14
140
1.00
0.14
230
0.40
0.14
450
0.30
0.14
450
0.30
0.14
670
0.15
0.14
670
0.15
0.14
670
0.15
0.14
60
3.00
0.12
60
3.00
0.12
60
3.00
0.12
60
3.00
0.12
95
1.80
0.12
95
1.80
0.12
140
1.00
0.12
230
0.40
0.12
230
0.40
0.12
670
0.15
0.12
670
0.15
0.12
670
0.15
0.12
30
5.00
0.12
30
5.00
0.12
30
5.00
0.12
50
3.00
0.12
70
2.00
0.12
120
0.70
0.12
300
0.60
0.12
500
0.30
0.12
500
0.30
0.12
500
0.30
0.12
Min. Packaging Q'ty
Part No.
EEEFC0J220R
EEEFC0J470R
EEEFC0J680P
EEEFC0J101P
EEEFC0J221P
EEEFC0J331P
EEEFC0J102P
EEEFC0J152P
EEEFC1A330R
EEEFC1A101P
EEEFC1A151P
EEEFC1A221P
EEEFC1A471P
EEEFC1A102P
EEEFC1C100R
EEEFC1C220R
EEEFC1C470P
EEEFC1C680P
EEEFC1C101P
EEEFC1C221P
EEEFC1C331P
EEEFC1C471P
EEEFC1C681P
EEEFC1E6R8R
EEEFC1E220P
EEEFC1E330P
EEEFC1E470P
EEEFC1E680P
EEEFC1E101P
EEEFC1E221P
EEEFC1E331P
EEEFC1E471P
EEEFC1V1R0R
EEEFC1V2R2R
EEEFC1V3R3R
EEEFC1V4R7R
EEEFC1V6R8R
EEEFC1V100R
EEEFC1V220P
EEEFC1V330P
EEEFC1V470P
EEEFC1V101P
EEEFC1V221P
EEEFC1V331P
EEEFC1H1R0R
EEEFC1H2R2R
EEEFC1H3R3R
EEEFC1H4R7R
EEEFC1H100P
EEEFC1H220P
EEEFC1H330P
EEEFC1H470P
EEEFC1H101P
EEEFC1H221P
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(1)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
2000
1000
1000
1000
1000
500
500
500
1000
1000
1000
500
500
500
2000
1000
1000
1000
1000
500
500
500
500
2000
1000
1000
1000
500
500
500
500
500
2000
2000
2000
2000
1000
1000
1000
1000
1000
500
500
500
2000
2000
2000
1000
1000
1000
500
500
500
500
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : FK Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● Endurance : 105 °C 2000 h
● Low impedance (40 % to 60
% less than FC series)
Miniaturized (30 % to 50 % less than FC series)
● Vibration-proof product is available upon request. (08 mm and larger)
● RoHS compliant
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
–55 °C to +105 °C
6.3 V.DC to 35 V.DC
4.7 µF to 1500 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
V.DC
6.3
10
16
25
35
Z(–25 °C)/Z(+20 °C)
2
2
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C)
3
3
3
3
3
Z(–55 °C)/Z(+20 °C)
4
4
4
3
3
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value
< 200 % of the initial limit
tan d
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
Frequency correction factor for ripple current
Frequency (Hz)
Capacitance (µF)
4.7
to
680
to
470
1500
120
1k
10 k
100 k to
0.65
0.70
0.85
0.90
0.95
0.95
1.00
1.00
0.3 max.
22
j FK
L
Pressure Relief (010 and larger)
Series identification
Mark for Lead-Free
products
(Black dot)
Rated voltage code
Lot number
R. Voltage
(V.DC)
Code
6.3
10
16
25
35
j
A
C
E
V
Size
code
B
C
D
D8
E
F
G
0D
L
A, B
4.0 5.8±0.3 4.3
5.0 5.8±0.3 5.3
6.3 5.8±0.3 6.6
6.3 7.7±0.3 6.6
8.0 6.2±0.3 8.3
8.0 10.2±0.3 8.3
10.0 10.2±0.3 10.3
(P)
+
(I)
Capacitance (µF)
A±0.2
B±0.2
Negative polarity
marking (–)
–
H
0D±0.5
Example : 6.3 V.DC 22 µF
Marking color : BLACK
(I)
Dimensions
K
Marking
W
( ) Reference size
(Unit : mm)
H
I
W
5.5 max.
6.5 max.
7.8 max.
7.8 max.
9.5 max.
10.0 max.
12.0 max.
1.8
2.2
2.6
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
P
K
1.0 0.35 +- 0.15
0.20
1.5 0.35 +- 0.15
0.20
+ 0.15
1.8 0.35 - 0.20
1.8 0.35 +- 0.15
0.20
2.2 0.35 +- 0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
22
47
100
6.3
220
330
470
1000
1500
22
33
150
10
220
330
470
680
1000
10
22
47
16
68
100
150
220
330
470
680
10
22
33
25
47
68
100
150
220
330
470
4.7
10
35
22
33
47
68
100
150
220
330
✽
0D
L
Size
code
4
4
5
5
6.3
6.3
6.3
8
8
8
10
4
4
5
6.3
6.3
8
8
8
8
10
4
4
5
5
6.3
6.3
6.3
6.3
6.3
8
8
8
10
4
5
5
6.3
6.3
6.3
6.3
8
8
8
8
10
4
4
5
5
6.3
6.3
6.3
6.3
8
8
8
10
5.8
5.8
5.8
5.8
5.8
5.8
7.7
6.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
7.7
6.2
10.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
5.8
5.8
5.8
7.7
7.7
6.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
5.8
5.8
7.7
6.2
10.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
5.8
5.8
7.7
7.7
10.2
10.2
10.2
10.2
B
(B)
C
(C)
D
D
D8
E
F
F
G
B
(B)
C
D
D8
E
F
F
F
G
B
(B)
C
(C)
D
D
D
D8
D8
E
F
F
G
B
C
(C)
D
D
D
D8
E
F
F
F
G
B
(B)
C
C
D
D
D8
D8
F
F
F
G
Ripple
Impedance
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
90
1.35
0.26
EEEFK0J220AR
90
1.35
0.26
EEEFKJ470UAR
160
0.70
0.26
EEEFK0J470AR
160
0.70
0.26
EEEFKJ101UAR
240
0.36
0.26
EEEFK0J101AP
240
0.36
0.26
EEEFK0J221AP
280
0.34
0.26
EEEFKJ331XAP
300
0.26
0.26
EEEFK0J331AP
600
0.16
0.26
EEEFK0J471AP
600
0.16
0.26
EEEFK0J102AP
850
0.08
0.26
EEEFK0J152AP
90
1.35
0.19
EEEFK1A220AR
90
1.35
0.19
EEEFKA330UAR
160
0.70
0.19
EEEFK1A330AR
240
0.36
0.19
EEEFK1A151AP
280
0.34
0.19
EEEFKA221XAP
300
0.26
0.19
EEEFK1A221AP
600
0.16
0.19
EEEFK1A331AP
600
0.16
0.19
EEEFK1A471AP
600
0.16
0.19
EEEFK1A681AP
850
0.08
0.19
EEEFK1A102AP
90
1.35
0.16
EEEFK1C100AR
90
1.35
0.16
EEEFKC220UAR
160
0.70
0.16
EEEFK1C220AR
160
0.70
0.16
EEEFKC470UAR
240
0.36
0.16
EEEFK1C470AP
240
0.36
0.16
EEEFK1C680AP
240
0.36
0.16
EEEFK1C101AP
280
0.34
0.16
EEEFKC151XAP
280
0.34
0.16
EEEFKC221XAP
300
0.26
0.16
EEEFK1C221AP
600
0.16
0.16
EEEFK1C331AP
600
0.16
0.16
EEEFK1C471AP
850
0.08
0.16
EEEFK1C681AP
90
1.35
0.14
EEEFK1E100AR
160
0.70
0.14
EEEFK1E220AR
160
0.70
0.14
EEEFKE330UAR
240
0.36
0.14
EEEFK1E330AP
240
0.36
0.14
EEEFK1E470AP
240
0.36
0.14
EEEFK1E680AP
280
0.34
0.14
EEEFKE101XAP
300
0.26
0.14
EEEFK1E101AP
600
0.16
0.14
EEEFK1E151AP
600
0.16
0.14
EEEFK1E221AP
600
0.16
0.14
EEEFK1E331AP
850
0.08
0.14
EEEFK1E471AP
90
1.35
0.12
EEEFK1V4R7AR
90
1.35
0.12
EEEFKV100UAR
160
0.70
0.12
EEEFK1V100AR
160
0.70
0.12
EEEFK1V220AR
240
0.36
0.12
EEEFK1V330AP
240
0.36
0.12
EEEFK1V470AP
280
0.34
0.12
EEEFKV680XAP
280
0.34
0.12
EEEFKV101XAP
600
0.16
0.12
EEEFK1V101AP
600
0.16
0.12
EEEFK1V151AP
600
0.16
0.12
EEEFK1V221AP
850
0.08
0.12
EEEFK1V331AP
Min. Packaging Q'ty
Reflow
Taping
(pcs)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
2000
2000
1000
1000
1000
1000
900
1000
500
500
500
2000
2000
1000
1000
900
1000
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
900
900
1000
500
500
500
2000
1000
1000
1000
1000
1000
900
1000
500
500
500
500
2000
2000
1000
1000
1000
1000
900
900
500
500
500
500
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : Medium-size FK Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● Endurance : 105 °C 5000 h
● Vibration-proof product is available
● RoHS compliant
upon request.
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–55 °C to +105 °C
6.3 V.DC to 100 V.DC
47 µF to 6800 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (µA) After 2 minutes
Please see the attached characteristics list
V.DC
6.3 10
16
25
35
50
63
80 100
Z(–25 °C)/Z(+20 °C) 2
2
2
2
2
2
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C) 3
3
3
3
3
3
3
3
3
Z(–55 °C)/Z(+20 °C) 4
4
4
3
3
3
3
3
3
After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value
< 200 % of the initial limit
tan d
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
0.75
Marking
1k
0.90
10 k
0.95
100 k to
1.00
Dimensions
Series identification
Mark for Lead-Free
products
(Black dot)
+
L
Pressure Relief
K
(P)
B±0.2
Capacitance (µF)
3300
j FK
H
0D±0.5
Negative polarity
marking (–)
A±0.2
–
(I)
0.3 max.
(I)
Example : 6.3 V.DC 3300 µF
Marking color : BLACK
W
( ) Reference
Rated voltage code
Lot number
R. Voltage
6.3 10 16 25 35 50 63 80 100
(V.DC)
Code
j A C E V H J K 2A
(Unit : mm)
Size
code
H13
J16
K16
0D
L
A, B
H
I
W
P
K
12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.30
16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30
18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 5000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
6.3
10
16
25
35
50
63
80
100
3300
6800
2200
4700
6800
1500
3300
4700
1000
1500
2200
3300
470
680
1000
1500
330
390
470
560
680
1000
150
220
470
680
68
100
150
330
470
47
68
100
150
220
330
Min. Packaging Q'ty
Specification
0D
L
Size
code
12.5
16
12.5
16
18
12.5
16
18
12.5
16
16
18
12.5
12.5
16
16
12.5
12.5
16
16
16
16
12.5
12.5
16
18
12.5
12.5
12.5
16
18
12.5
12.5
16
16
18
18
13.5
16.5
13.5
16.5
16.5
13.5
16.5
16.5
13.5
16.5
16.5
16.5
13.5
13.5
16.5
16.5
13.5
13.5
16.5
16.5
16.5
16.5
13.5
13.5
16.5
16.5
13.5
13.5
13.5
16.5
16.5
13.5
13.5
16.5
16.5
16.5
16.5
H13
J16
H13
J16
K16
H13
J16
K16
H13
J16
J16
K16
H13
H13
J16
J16
H13
H13
J16
J16
J16
J16
H13
H13
J16
K16
H13
H13
H13
J16
K16
H13
H13
J16
J16
K16
K16
Ripple
Impedance
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
1100
0.06
0.30
EEEFK0J332AQ
1800
0.035
0.36
EEEFK0J682AM
1100
0.06
0.21
EEEFK1A222AQ
1800
0.035
0.25
EEEFK1A472AM
2060
0.033
0.29
EEEFK1A682AM
1100
0.06
0.16
EEEFK1C152AQ
1800
0.035
0.20
EEEFK1C332AM
2060
0.033
0.22
EEEFK1C472AM
1100
0.06
0.14
EEEFK1E102AQ
1800
0.035
0.16
EEEFK1E152AM
1800
0.035
0.16
EEEFK1E222AM
2060
0.033
0.18
EEEFK1E332AM
1100
0.06
0.12
EEEFK1V471AQ
1100
0.06
0.12
EEEFK1V681AQ
1800
0.035
0.12
EEEFK1V102AM
1800
0.035
0.12
EEEFK1V152AM
900
0.12
0.12
EEEFK1H331AQ
900
0.12
0.12
EEEFK1H391AQ
1610
0.073
0.12
EEEFK1H471AM
1610
0.073
0.12
EEEFK1H561AM
1610
0.073
0.12
EEEFK1H681AM
1610
0.073
0.12
EEEFK1H102AM
800
0.16
0.10
EEEFK1J151AQ
800
0.16
0.10
EEEFK1J221AQ
1410
0.082
0.10
EEEFK1J471AM
1690
0.08
0.10
EEEFK1J681AM
500
0.32
0.08
EEEFK1K680AQ
500
0.32
0.08
EEEFK1K101AQ
500
0.32
0.08
EEEFK1K151AQ
793
0.17
0.08
EEEFK1K331AM
917
0.153
0.08
EEEFK1K471AM
500
0.32
0.07
EEEFK2A470AQ
500
0.32
0.07
EEEFK2A680AQ
793
0.17
0.07
EEEFK2A101AM
793
0.17
0.07
EEEFK2A151AM
917
0.153
0.07
EEEFK2A221AM
917
0.153
0.07
EEEFK2A331AM
Reflow
Taping
(pcs)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
200
125
200
125
125
200
125
125
200
125
125
125
200
200
125
125
200
200
125
125
125
125
200
200
125
125
200
200
200
125
125
200
200
125
125
125
125
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “Q” or “M”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : FK Type : V
Features
● Endurance : 105 °C 2000 h to 5000 h
● Low impedance (40 % to 60 % less than
FC series)
Miniaturized (30 % to 50 % less than FC series)
● Vibration-proof product is available upon request. (08 mm and larger)
● RoHS compliant
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–55 °C to +105 °C
6.3 V.DC to 100 V.DC
3.3 µF to 6800 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
V.DC
6.3 10 16 25 35 50 63 80 100
Z(–25 °C)/Z(+20 °C) 2
2
2
2
2
2
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C) 3
3
3
3
3
3
3
3
3
Z(–55 °C)/Z(+20 °C) 4
4
4
3
3
3
3
3
3
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits. ( > 012.5 and suffix “G” in 08×10.2, 010×10.2 are 5000 hours)
Capacitance change
Within ±30 % of the initial value (Suffix “G” is 35 %)
< 200 % of the initial limit (Suffix “G” is 300 %)
tan d
DC leakage current
Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change
Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current
Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
50, 60
0.70
1k
0.90
K
(I)
(P)
(I)
+
L
Pressure Relief (010 and larger)
Rated Voltage code
A±0.2
–
H
0D±0.5
Series identification
Mark for Lead-Free
products
(Black dot)
W
( ) Reference size
(Unit : mm)
> 012.5
Lot number
0.3 max.
Capacitance (µF)
22
j FK
Lot number
Negative polarity
marking (–)
100 k to
1.00
Dimensions
Example : 6.3 V.DC 22 µF, 6.3 V.DC 3300 µF
Marking color : BLACK
< 010
Negative polarity
marking (–)
10 k
0.95
B±0.2
Marking
120
0.75
Capacitance (µF)
3300
j FK
Series identification
Rated Voltage code
R. Voltage
6.3 10 16 25 35 50 63 80 100
(V.DC)
Code
j A C E V H J K 2A
Size
code
B
C
D
D8
E
F
G
H13
J16
K16
0D
L
A,B
4.0
5.0
6.3
6.3
8.0
8.0
10.0
12.5
16.0
18.0
5.8±0.3
5.8±0.3
5.8±0.3
7.7±0.3
6.2±0.3
10.2±0.3
10.2±0.3
13.5±0.5
16.5±0.5
16.5±0.5
4.3
5.3
6.6
6.6
8.3
8.3
10.3
13.5
17.0
19.0
H
5.5
6.5
7.8
7.8
9.5
10.0
12.0
15.0
19.0
21.0
max.
max.
max.
max.
max.
max.
max.
max.
max.
max.
I
W
P
K
1.8
2.2
2.6
2.6
3.4
3.4
3.5
4.7
5.5
6.7
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
0.90±0.3
1.20±0.3
1.20±0.3
1.0
1.5
1.8
1.8
2.2
3.1
4.6
4.4
6.7
6.7
0.35 -+1.5
0.2
0.35 -+1.5
0.2
0.35 -+1.5
0.2
0.35 -+1.5
0.2
0.35 -+1.5
0.2
0.70±0.2
0.70±0.2
0.70±0.3
0.70±0.3
0.70±0.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h (> 012.5 : 5000 h)
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
22
47
100
220
6.3
330
470
1000
1500
3300
6800
22
33
150
220
10
330
470
680
1000
2200
4700
6800
10
22
47
16
68
100
150
220
330
470
680
1500
3300
4700
10
22
33
47
68
100
25
150
220
330
470
1000
1500
2200
3300
✽
0D
L
Size
code
4
4
5
5
6.3
6.3
6.3
8
8
8
10
12.5
16
4
4
5
6.3
6.3
8
8
8
8
10
12.5
16
18
4
4
5
5
6.3
6.3
6.3
6.3
6.3
8
8
8
10
12.5
16
18
4
5
5
6.3
6.3
6.3
6.3
8
8
8
8
10
12.5
16
16
18
5.8
5.8
5.8
5.8
5.8
5.8
7.7
6.2
10.2
10.2
10.2
13.5
16.5
5.8
5.8
5.8
5.8
7.7
6.2
10.2
10.2
10.2
10.2
13.5
16.5
16.5
5.8
5.8
5.8
5.8
5.8
5.8
5.8
7.7
7.7
6.2
10.2
10.2
10.2
13.5
16.5
16.5
5.8
5.8
5.8
5.8
5.8
5.8
7.7
6.2
10.2
10.2
10.2
10.2
13.5
16.5
16.5
16.5
B
(B)
C
(C)
D
D
D8
E
F
F
G
H13
J16
B
(B)
C
D
D8
E
F
F
F
G
H13
J16
K16
B
(B)
C
(C)
D
D
D
D8
D8
E
F
F
G
H13
J16
K16
B
C
(C)
D
D
D
D8
E
F
F
F
G
H13
J16
J16
K16
Ripple
Impedance
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
90
1.35
0.26
EEEFK0J220R
90
1.35
0.26
EEEFK0J470UR
160
0.70
0.26
EEEFK0J470R
160
0.70
0.26
EEEFK0J101UR
240
0.36
0.26
EEEFK0J101P
240
0.36
0.26
EEEFK0J221P
280
0.34
0.26
EEEFK0J331XP
300
0.26
0.26
EEEFK0J331P
600
0.16
0.26
EEEFK0J471P
600
0.16
0.26
EEEFK0J102P
850
0.08
0.26
EEEFK0J152P
1100
0.06
0.30
EEVFK0J332Q
1800
0.035
0.36
EEVFK0J682M
90
1.35
0.19
EEEFK1A220R
90
1.35
0.19
EEEFK1A330UR
160
0.70
0.19
EEEFK1A330R
240
0.36
0.19
EEEFK1A151P
280
0.34
0.19
EEEFK1A221XP
300
0.26
0.19
EEEFK1A221P
600
0.16
0.19
EEEFK1A331P
600
0.16
0.19
EEEFK1A471P
600
0.16
0.19
EEEFK1A681P
850
0.08
0.19
EEEFK1A102P
1100
0.06
0.21
EEVFK1A222Q
1800
0.035
0.25
EEVFK1A472M
2060
0.033
0.29
EEVFK1A682M
90
1.35
0.16
EEEFK1C100R
90
1.35
0.16
EEEFK1C220UR
160
0.70
0.16
EEEFK1C220R
160
0.70
0.16
EEEFK1C470UR
240
0.36
0.16
EEEFK1C470P
240
0.36
0.16
EEEFK1C680P
240
0.36
0.16
EEEFK1C101P
280
0.34
0.16
EEEFK1C151XP
280
0.34
0.16
EEEFK1C221XP
300
0.26
0.16
EEEFK1C221P
600
0.16
0.16
EEEFK1C331P
600
0.16
0.16
EEEFK1C471P
850
0.08
0.16
EEEFK1C681P
1100
0.06
0.16
EEVFK1C152Q
1800
0.035
0.20
EEVFK1C332M
2060
0.033
0.22
EEVFK1C472M
90
1.35
0.14
EEEFK1E100R
160
0.70
0.14
EEEFK1E220R
160
0.70
0.14
EEEFK1E330UR
240
0.36
0.14
EEEFK1E330P
240
0.36
0.14
EEEFK1E470P
240
0.36
0.14
EEEFK1E680P
280
0.34
0.14
EEEFK1E101XP
300
0.26
0.14
EEEFK1E101P
600
0.16
0.14
EEEFK1E151P
600
0.16
0.14
EEEFK1E221P
600
0.16
0.14
EEEFK1E331P
850
0.08
0.14
EEEFK1E471P
1100
0.06
0.14
EEVFK1E102Q
1800
0.035
0.14
EEVFK1E152M
1800
0.035
0.16
EEVFK1E222M
2060
0.033
0.18
EEVFK1E332M
Min. Packaging Q'ty
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(3)
(3)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
2000
2000
1000
1000
1000
1000
900
1000
500
500
500
200
125
2000
2000
1000
1000
900
1000
500
500
500
500
200
125
125
2000
2000
1000
1000
1000
1000
1000
900
900
1000
500
500
500
200
125
125
2000
1000
1000
1000
1000
1000
900
1000
500
500
500
500
200
125
125
125
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h (> 012.5 : 5000 h)
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
4.7
10
22
33
47
68
35
100
150
220
330
470
680
1000
1500
4.7
10
22
33
47
50
100
150
220
330
390
470
560
680
1000
4.7
10
22
63
33
47
68
100
150
220
470
680
3.3
4.7
10
80
22
33
47
68
100
150
330
470
✽
0D
L
Size
code
4
4
5
5
6.3
6.3
6.3
6.3
8
8
8
10
12.5
12.5
16
16
4
5
6.3
6.3
6.3
8
6.3
8
8
10
10
12.5
12.5
16
16
16
16
5
6.3
6.3
8
8
8
8
10
12.5
12.5
16
18
5
6.3
6.3
8
8
8
10
12.5
12.5
12.5
16
18
5.8
5.8
5.8
5.8
5.8
5.8
7.7
7.7
10.2
10.2
10.2
10.2
13.5
13.5
16.5
16.5
5.8
5.8
5.8
5.8
7.7
6.2
7.7
6.2
10.2
10.2
10.2
13.5
13.5
16.5
16.5
16.5
16.5
5.8
5.8
7.7
6.2
10.2
10.2
10.2
10.2
13.5
13.5
16.5
16.5
5.8
5.8
7.7
6.2
10.2
10.2
10.2
13.5
13.5
13.5
16.5
16.5
B
(B)
C
C
D
D
D8
D8
F
F
F
G
H13
H13
J16
J16
B
(C)
D
D
D8
E
D8
E
F
G
G
H13
H13
J16
J16
J16
J16
C
D
D8
E
F
F
(F)
G
H13
H13
J16
K16
C
D
D8
E
F
F
G
H13
H13
H13
J16
K16
Ripple
Impedance
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
90
1.35
0.12
EEEFK1V4R7R
90
1.35
0.12
EEEFK1V100UR
160
0.70
0.12
EEEFK1V100R
160
0.70
0.12
EEEFK1V220R
240
0.36
0.12
EEEFK1V330P
240
0.36
0.12
EEEFK1V470P
280
0.34
0.12
EEEFK1V680XP
280
0.34
0.12
EEEFK1V101XP
600
0.16
0.12
EEEFK1V101P
600
0.16
0.12
EEEFK1V151P
600
0.16
0.12
EEEFK1V221P
850
0.08
0.12
EEEFK1V331P
1100
0.06
0.12
EEVFK1V471Q
1100
0.06
0.12
EEVFK1V681Q
1800
0.035
0.12
EEVFK1V102M
1800
0.035
0.12
EEVFK1V152M
60
2.90
0.10
EEEFK1H4R7R
85
1.52
0.10
EEEFK1H100UR
165
0.88
0.10
EEEFK1H100P
165
0.88
0.10
EEEFK1H220P
195
0.68
0.10
EEEFK1H330XP
195
0.68
0.10
EEEFK1H330P
195
0.68
0.10
EEEFK1H470XP
195
0.68
0.10
EEEFK1H470P
350
0.34
0.10
EEEFK1H101P
670
0.18
0.10
EEEFK1H151P
670
0.18
0.10
EEEFK1H221P
900
0.12
0.10
EEVFK1H331Q
900
0.12
0.10
EEVFK1H391Q
1610
0.073
0.10
EEVFK1H471M
1610
0.073
0.10
EEVFK1H561M
1610
0.073
0.10
EEVFK1H681M
1610
0.073
0.10
EEVFK1H102M
50
3.00
0.08
EEEFK1J4R7R
80
1.50
0.08
EEEFK1J100P
120
1.20
0.08
EEEFK1J220XP
120
1.20
0.08
EEEFK1J220P
250
0.65
0.08
EEEFK1J330P
250
0.65
0.08
EEEFK1J470P
250
0.65
0.08
EEEFK1J680UP
400
0.35
0.08
EEEFK1J101P
800
0.16
0.08
EEVFK1J151Q
800
0.16
0.08
EEVFK1J221Q
1410
0.082
0.08
EEVFK1J471M
1690
0.08
0.08
EEVFK1J681M
25
5.00
0.08
EEEFK1K3R3R
40
3.00
0.08
EEEFK1K4R7P
60
2.40
0.08
EEEFK1K100XP
60
2.40
0.08
EEEFK1K100P
130
1.30
0.08
EEEFK1K220P
130
1.30
0.08
EEEFK1K330P
200
0.70
0.08
EEEFK1K470P
500
0.32
0.08
EEVFK1K680Q
500
0.32
0.08
EEVFK1K101Q
500
0.32
0.08
EEVFK1K151Q
793
0.17
0.08
EEVFK1K331M
917
0.153
0.08
EEVFK1K471M
Min. Packaging Q'ty
Reflow
Taping
(pcs)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(1)
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(3)
(3)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(3)
2000
2000
1000
1000
1000
1000
900
900
500
500
500
500
200
200
125
125
2000
1000
1000
1000
900
1000
900
1000
500
500
500
200
200
125
125
125
125
1000
1000
900
1000
500
500
500
500
200
200
125
125
1000
1000
900
1000
500
500
500
200
200
200
125
125
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h (> 012.5 : 5000 h)
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
100
22
33
47
68
100
150
220
330
✽
0D
L
Size
code
8
10
12.5
12.5
16
16
18
18
10.2
10.2
13.5
13.5
16.5
16.5
16.5
16.5
F
G
H13
H13
J16
J16
K16
K16
Min. Packaging Q'ty
Ripple
Impedance
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
130
1.30
0.07
EEEFK2A220P
200
0.70
0.07
EEEFK2A330P
500
0.32
0.07
EEVFK2A470Q
500
0.32
0.07
EEVFK2A680Q
793
0.17
0.07
EEVFK2A101M
793
0.17
0.07
EEVFK2A151M
917
0.153
0.07
EEVFK2A221M
917
0.153
0.07
EEVFK2A331M
Reflow
Taping
(pcs)
(2)
(2)
(3)
(3)
(3)
(3)
(3)
(3)
500
500
200
200
125
125
125
125
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
Characteristics list
Endurance : 105 °C 5000 h
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
6.3
10
16
25
35
50
470
1000
1500
330
470
680
1000
330
470
680
150
220
330
470
100
150
220
330
100
150
220
✽
0D
8
8
10
8
8
8
10
8
8
10
8
8
8
10
8
8
8
10
8
10
10
L
Size
code
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
F
F
G
F
F
F
G
F
F
G
F
F
F
G
F
F
F
G
F
G
G
Ripple
Impedance
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
600
0.16
0.26
EEEFK0J471GP
600
0.16
0.26
EEEFK0J102GP
850
0.08
0.26
EEEFK0J152GP
600
0.16
0.19
EEEFK1A331GP
600
0.16
0.19
EEEFK1A471GP
600
0.16
0.19
EEEFK1A681GP
850
0.08
0.19
EEEFK1A102GP
600
0.16
0.16
EEEFK1C331GP
600
0.16
0.16
EEEFK1C471GP
850
0.08
0.16
EEEFK1C681GP
600
0.16
0.14
EEEFK1E151GP
600
0.16
0.14
EEEFK1E221GP
600
0.16
0.14
EEEFK1E331GP
850
0.08
0.14
EEEFK1E471GP
600
0.16
0.12
EEEFK1V101GP
600
0.16
0.12
EEEFK1V151GP
600
0.16
0.12
EEEFK1V221GP
850
0.08
0.12
EEEFK1V331GP
350
0.34
0.10
EEEFK1H101GP
670
0.18
0.10
EEEFK1H151GP
670
0.18
0.10
EEEFK1H221GP
Min. Packaging Q'ty
Reflow
Taping
(pcs)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
NEW
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
6.3
10
16
25
35
50
270
470
1800
220
330
820
1200
150
270
560
1000
100
150
180
390
680
68
82
120
270
470
39
82
180
270
Min. Packaging Q'ty
Specification
0D
L
Size
Code
6.3
6.3
10
6.3
6.3
8
10
6.3
6.3
8
10
6.3
6.3
6.3
8
10
6.3
6.3
6.3
8
10
6.3
6.3
8
10
5.8
7.7
10.2
5.8
7.7
10.2
10.2
5.8
7.7
10.2
10.2
5.8
7.7
7.7
10.2
10.2
5.8
5.8
7.7
10.2
10.2
5.8
7.7
10.2
10.2
D
D8
G
D
D8
F
G
D
D8
F
G
D
D8
D8
F
G
D
D
D8
F
G
D
D8
F
G
Ripple
ESR
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
240
0.36
0.26
EEEFK0J271SP
280
0.34
0.26
EEEFKJ471XSP
850
0.08
0.26
EEEFK0J182SP
240
0.36
0.19
EEEFK1A221SP
280
0.34
0.19
EEEFKA331XSP
600
0.16
0.19
EEEFK1A821SP
850
0.08
0.19
EEEFK1A122SP
240
0.36
0.16
EEEFK1C151SP
280
0.34
0.16
EEEFKC271XSP
600
0.16
0.16
EEEFK1C561SP
850
0.08
0.16
EEEFK1C102SP
240
0.36
0.14
EEEFK1E101SP
280
0.34
0.14
EEEFKE151XSP
280
0.34
0.14
EEEFKE181XSP
600
0.16
0.14
EEEFK1E391SP
850
0.08
0.14
EEEFK1E681SP
240
0.36
0.12
EEEFK1V680SP
240
0.36
0.12
EEEFK1V820SP
280
0.34
0.12
EEEFKV121XSP
600
0.16
0.12
EEEFK1V271SP
850
0.08
0.12
EEEFK1V471SP
165
0.88
0.10
EEEFK1H390SP
195
0.68
0.10
EEEFKH820XSP
350
0.34
0.10
EEEFK1H181SP
670
0.18
0.10
EEEFK1H271SP
Reflow
Taping
(pcs)
(5)
(5)
(6)
(5)
(5)
(6)
(6)
(5)
(5)
(6)
(6)
(5)
(5)
(5)
(6)
(6)
(5)
(5)
(5)
(6)
(6)
(5)
(5)
(6)
(6)
1000
900
500
1000
900
500
500
1000
900
500
500
1000
900
900
500
500
1000
1000
900
500
500
1000
900
500
500
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V, 1H → H
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : FT Type : V
High temperature Lead-Free reflow
Features
● Endurance
: 105 °C 2000 h to 5000 h
Low ESR (1 size smaller than series FK)
● Vibration-proof product is available upon request. (08 mm and larger)
● RoHS compliant
● Miniaturized,
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–55 °C to +105 °C
6.3 V.DC to 50 V.DC
10 μF to 2200 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV After 2 minutes
Please see the attached characteristics list
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits. (Suffix “G” in 6.3 V.DC : 3000 hours, 10 V.DC to 50 V.DC : 5000 hours)
Capacitance change Within ±30 % of the initial value (Suffix “G” is ±35 %)
tan d
< 200 % of the initial limit (Suffix “G” is < 300 %)
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Capacitance (μF)
10
to
560
to
470
2200
120
1k
10 k
100 k to
0.65
0.70
0.85
0.90
0.95
0.95
1.00
1.00
Capacitance (μF)
22
E FT
L
Series identification
K
A±0.2
(P)
+
W
Pressure Relief (010 and larger)
( ) Reference size
(Unit : mm)
Rated voltage code
Lot number
R. Voltage
6.3
(V.DC)
Code
j
H
0D±0.5
Negative polarity
marking (–)
–
(I)
0.3 max.
Example : 25 V.DC 22 μF
Marking color : BLACK
(I)
Dimensions
B±0.2
Marking
10
16
25
35
50
A
C
E
V
H
Size
H
L
A, B
0D
code
B
4.0 5.8±0.3 4.3 5.5 max.
C
5.0 5.8±0.3 5.3 6.5 max.
D
6.3 5.8±0.3 6.6 7.8 max.
D8
6.3 7.7±0.3 6.6 7.8 max.
F
8.0 10.2±0.3 8.3 10.0 max.
G 10.0 10.2±0.3 10.3 12.0 max.
I
W
P
K
1.8
2.2
2.6
2.6
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.0
1.5
1.8
1.8
3.1
4.6
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.35 +- 0.15
0.20
0.70±0.20
0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Feb. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC)
(μF)
6.3
10
16
25
35
100
220
330
470
680
1500
2200
68
150
220
330
470
1000
1500
47
68
100
150
220
330
680
1000
22
33
47
68
100
150
220
470
820
22
33
47
68
100
150
330
560
10
50
22
47
100
220
330
✽
0D
L
Size
code
4
5
6.3
6.3
6.3
8
10
4
5
6.3
6.3
6.3
8
10
4
5
5
6.3
6.3
6.3
8
10
4
4
5
5
6.3
6.3
6.3
8
10
4
5
5
6.3
6.3
6.3
8
10
4
5
5
6.3
6.3
8
10
5.8
5.8
5.8
7.7
7.7
10.2
10.2
5.8
5.8
5.8
7.7
7.7
10.2
10.2
5.8
5.8
5.8
5.8
5.8
7.7
10.2
10.2
5.8
5.8
5.8
5.8
5.8
7.7
7.7
10.2
10.2
5.8
5.8
5.8
5.8
5.8
7.7
10.2
10.2
5.8
5.8
5.8
5.8
7.7
10.2
10.2
B
C
D
D8
D8
F
G
B
C
D
D8
D8
F
G
B
C
C
D
D
D8
F
G
B
B
C
C
D
D8
D8
F
G
B
C
C
D
D
D8
F
G
(B)
C
C
D
D8
F
G
Ripple
ESR
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
160
0.85
0.26
EEEFT0J101AR
240
0.36
0.26
EEEFT0J221AR
300
0.26
0.26
EEEFT0J331AP
600
0.16
0.26
EEEFTJ471XAP
600
0.16
0.26
EEEFTJ681XAP
850
0.08
0.26
EEEFT0J152AP
1190
0.06
0.28
EEEFT0J222AP
160
0.85
0.19
EEEFT1A680AR
240
0.36
0.19
EEEFT1A151AR
300
0.26
0.19
EEEFT1A221AP
600
0.16
0.19
EEEFTA331XAP
600
0.16
0.19
EEEFTA471XAP
850
0.08
0.19
EEEFT1A102AP
1190
0.06
0.19
EEEFT1A152AP
160
0.85
0.16
EEEFT1C470AR
240
0.36
0.16
EEEFT1C680AR
240
0.36
0.16
EEEFT1C101AR
300
0.26
0.16
EEEFT1C151AP
300
0.26
0.16
EEEFT1C221AP
600
0.16
0.16
EEEFTC331XAP
850
0.08
0.16
EEEFT1C681AP
1190
0.06
0.16
EEEFT1C102AP
160
0.85
0.14
EEEFT1E220AR
160
0.85
0.14
EEEFT1E330AR
240
0.36
0.14
EEEFT1E470AR
240
0.36
0.14
EEEFT1E680AR
300
0.26
0.14
EEEFT1E101AP
600
0.16
0.14
EEEFTE151XAP
600
0.16
0.14
EEEFTE221XAP
850
0.08
0.14
EEEFT1E471AP
1190
0.06
0.14
EEEFT1E821AP
160
0.85
0.12
EEEFT1V220AR
240
0.36
0.12
EEEFT1V330AR
240
0.36
0.12
EEEFT1V470AR
300
0.26
0.12
EEEFT1V680AP
300
0.26
0.12
EEEFT1V101AP
600
0.16
0.12
EEEFTV151XAP
850
0.08
0.12
EEEFT1V331AP
1190
0.06
0.12
EEEFT1V561AP
85
2.30
0.10
EEEFTH100UAR
165
0.88
0.10
EEEFT1H100AR
165
0.88
0.10
EEEFT1H220AR
195
0.68
0.10
EEEFT1H470AP
350
0.34
0.10
EEEFTH101XAP
670
0.18
0.10
EEEFT1H221AP
900
0.12
0.10
EEEFT1H331AP
Min. Packaging Q'ty
Reflow
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
Taping
(pcs)
2000
1000
1000
900
900
500
500
2000
1000
1000
900
900
500
500
2000
1000
1000
1000
1000
900
500
500
2000
2000
1000
1000
1000
900
900
500
500
2000
1000
1000
1000
1000
900
500
500
2000
1000
1000
1000
900
500
500
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V, 1H → H
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Feb. 2016
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : FP Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● Low ESR (30 % to 50 % less than FK series)
● Endurance : 105 °C 2000 h
● Vibration-proof product is available upon request.
● RoHS compliant
(08 mm and larger)
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–55 °C to +105 °C
6.3 V.DC to 50 V.DC
10 μF to 1800 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater)
Please see the attached characteristics list
V.DC
6.3 10 16 25 35 50
Z(–25 °C)/Z(+20 °C)
2
2
2
2
2
2
(Impedance ratio at 120 Hz)
Z(–40°C)/Z(+20 °C)
3
3
3
3
3
3
Z(–55°C)/Z(+20 °C)
4
4
4
3
3
3
After applying rated working voltage at +105 °C ±2 °C for 2000 hours the capacitors shall meet
the limits specified below. Post-test requirement at +20 °C
Capacitance change Within ±30 % of the initial value
< 200 % of the initial limit
tan d
DC leakege current
Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current
Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Capacitance (μF)
10
to
560
to
470
1800
120
1k
10 k
100 k to
0.65
0.75
0.85
0.90
0.95
0.95
1.00
1.00
Series identification
(P)
B±0.2
W
Pressure Relief (010 and larger)
Mark for Lead-Free
products
(Black dot)
Rated voltage code
Lot number
R. Voltage
6.3
(V.DC)
Code
j
+
L
Capacitance (μF)
22
j FP
H
0D±0.5
Negative polarity
marking (–)
A±0.2
–
K
0.3 max.
Example : 6.3 V.DC 22 μF
Marking color : BLACK
10
16
25
35
50
A
C
E
V
H
Size
L
A, B
0D
code
B
4.0 5.8±0.30 4.3
C
5.0 5.8±0.30 5.3
D
6.3 5.8±0.30 6.6
D8
6.3 7.7±0.30 6.6
E
8.0 6.2±0.30 8.3
F
8.0 10.2±0.30 8.3
G 10.0 10.2±0.30 10.3
(I)
Dimensions
(I)
Marking
( ) Reference size
(Unit : mm)
H
I
W
5.5 max.
6.5 max.
7.8 max.
7.8 max.
9.5 max.
10.0 max.
12.0 max.
1.8
2.2
2.6
2.6
3.4
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
P
K
1.0 0.35 +- 0.15
0.20
1.5 0.35 +- 0.15
0.20
1.8 0.35 +- 0.15
0.20
1.8 0.35 +- 0.15
0.20
2.2 0.35 +- 0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (μF)
22
47
100
6.3
220
330
470
1000
1500
1800
22
33
150
10
220
330
470
680
1000
1200
10
22
47
68
16
100
150
220
330
470
680
820
10
22
33
47
68
25
100
150
220
330
470
560
Min. Packaging Q'ty
Specification
✽
0D
L
Size
code
4
4
5
5
6.3
6.3
6.3
8
8
8
10
10
4
4
5
6.3
6.3
8
8
8
8
10
10
4
4
5
5
6.3
6.3
6.3
6.3
6.3
6.3
8
8
8
10
10
4
5
5
6.3
6.3
6.3
6.3
8
8
8
8
10
10
5.8
5.8
5.8
5.8
5.8
5.8
7.7
6.2
10.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
7.7
6.2
10.2
10.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
5.8
5.8
5.8
7.7
7.7
7.7
6.2
10.2
10.2
10.2
10.2
5.8
5.8
5.8
5.8
5.8
5.8
7.7
6.2
10.2
10.2
10.2
10.2
10.2
B
(B)
C
(C)
D
D
D8
E
F
F
G
(G)
B
(B)
C
D
D8
E
F
F
F
G
(G)
B
(B)
C
(C)
D
D
D
D8
D8
D8
E
F
F
G
(G)
B
C
(C)
D
D
D
D8
E
F
F
F
G
(G)
Ripple
ESR
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
160
0.85
0.26
EEEFP0J220AR
160
0.85
0.26
EEEFPJ470UAR
240
0.36
0.26
EEEFP0J470AR
240
0.36
0.26
EEEFPJ101UAR
300
0.26
0.26
EEEFP0J101AP
300
0.26
0.26
EEEFP0J221AP
600
0.16
0.26
EEEFPJ331XAP
500
0.18
0.26
EEEFP0J331AP
850
0.08
0.26
EEEFP0J471AP
850
0.08
0.26
EEEFP0J102AP
1190
0.06
0.26
EEEFP0J152AP
850
0.08
0.26
EEEFPJ182UAP
160
0.85
0.19
EEEFP1A220AR
160
0.85
0.19
EEEFPA330UAR
240
0.36
0.19
EEEFP1A330AR
300
0.26
0.19
EEEFP1A151AP
600
0.16
0.19
EEEFPA221XAP
500
0.18
0.19
EEEFP1A221AP
850
0.08
0.19
EEEFP1A331AP
850
0.08
0.19
EEEFP1A471AP
850
0.08
0.19
EEEFP1A681AP
1190
0.06
0.19
EEEFP1A102AP
850
0.08
0.19
EEEFPA122UAP
160
0.85
0.16
EEEFP1C100AR
160
0.85
0.16
EEEFPC220UAR
240
0.36
0.16
EEEFP1C220AR
240
0.36
0.16
EEEFPC470UAR
300
0.26
0.16
EEEFP1C470AP
300
0.26
0.16
EEEFP1C680AP
300
0.26
0.16
EEEFP1C101AP
600
0.16
0.16
EEEFPC101XAP
600
0.16
0.16
EEEFPC151XAP
600
0.16
0.16
EEEFPC221XAP
500
0.18
0.16
EEEFP1C221AP
850
0.08
0.16
EEEFP1C331AP
850
0.08
0.16
EEEFP1C471AP
1190
0.06
0.16
EEEFP1C681AP
850
0.08
0.16
EEEFPC821UAP
160
0.85
0.14
EEEFP1E100AR
240
0.36
0.14
EEEFP1E220AR
240
0.36
0.14
EEEFPE330UAR
300
0.26
0.14
EEEFP1E330AP
300
0.26
0.14
EEEFP1E470AP
300
0.26
0.14
EEEFP1E680AP
600
0.16
0.14
EEEFPE101XAP
500
0.18
0.14
EEEFP1E101AP
850
0.08
0.14
EEEFP1E151AP
850
0.08
0.14
EEEFP1E221AP
850
0.08
0.14
EEEFP1E331AP
1190
0.06
0.14
EEEFP1E471AP
850
0.08
0.14
EEEFPE561UAP
Reflow
Taping
(pcs)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(6)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(6)
(6)
2000
2000
1000
1000
1000
1000
900
1000
500
500
500
500
2000
2000
1000
1000
900
1000
500
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
900
900
900
1000
500
500
500
500
2000
1000
1000
1000
1000
1000
900
1000
500
500
500
500
500
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 2000 h
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (μF)
10
22
33
47
68
35
50
100
150
220
330
390
100
220
✽
0D
L
Size
code
4
5
6.3
6.3
6.3
6.3
8
8
8
10
10
8
10
5.8
5.8
5.8
5.8
7.7
7.7
10.2
10.2
10.2
10.2
10.2
10.2
10.2
(B)
C
D
D
D8
D8
F
F
F
G
(G)
F
G
Ripple
ESR
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+105 °C)
(Ω)
(mA r.m.s.)
160
0.85
0.12
EEEFPV100UAR
240
0.36
0.12
EEEFP1V220AR
300
0.26
0.12
EEEFP1V330AP
300
0.26
0.12
EEEFP1V470AP
600
0.16
0.12
EEEFPV680XAP
600
0.16
0.12
EEEFPV101XAP
850
0.08
0.12
EEEFP1V101AP
850
0.08
0.12
EEEFP1V151AP
850
0.08
0.12
EEEFP1V221AP
1190
0.06
0.12
EEEFP1V331AP
850
0.08
0.12
EEEFPV391UAP
670
0.18
0.10
EEEFP1H101AP
900
0.12
0.10
EEEFP1H221AP
Min. Packaging Q'ty
Reflow
Taping
(pcs)
(5)
(5)
(5)
(5)
(5)
(5)
(6)
(6)
(6)
(6)
(6)
(6)
(6)
2000
1000
1000
1000
900
900
500
500
500
500
500
500
500
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : TG Type : V
Features
● Endurance : 125 °C 1000 h to 2000 h
● Miniaturization (40 % less than TA Series)
● Low ESR (Low temp)
● Vibration-proof product is available upon request. (08 mm and larger)
● RoHS compliant (Parts No 08 to 010 : EEE✽, 012.5 to 018 : EEV✽)
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +125 °C
10 V.DC to 100 V.DC
10 µF to 4700 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV After 2 minutes
Please see the attached characteristics list
V.DC
10
16
25
35
50
63
80 100
Z(–25 °C)/Z(+20 °C) 3
2
2
2
2
2
2
2 (Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C) 6
4
4
3
3
3
3
3
After applying rated working voltage for 1000 hours (08×6.2), 2000 hours (08×10.2 <) at +125 °C±2 °C
and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value (code U : ±35 %)
< 300 % of the initial limit (code U : ±350 %)
tan d
DC leakage current Within the initial limit
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
0.65
Marking
1k
0.85
10 k
0.95
100 k to
1.00
Dimensions
(P)
+
(I)
L
Pressure Relief (010 and larger)
Rated Voltage code
Lot number
B±0.2
Series identification
Mark for Lead-Free
products
(Black dot)
H
100
A TG
0D±0.5
Negative polarity
marking (–)
A±0.2
–
K
0.3 max.
Capacitance (µF)
(I)
Example : 10 V.DC 100 µF, 10 V.DC 1000 µF
Marking color : BLACK
Lead-Free products (< 010)
W
( ) Reference size
Lead-Free products (> 012.5)
Capacitance (µF)
Negative polarity
marking (–)
1000
A TG
Rated Voltage code
Lot number
R. Voltage
10
(V.DC)
Code
A
(Unit : mm)
Series identification
16
25
35
50
63
C
E
V
H
J
80 100
K
2A
Size
code
E
F
G
H13
J16
K16
0D
L
A, B
H
I
W
P
K
8.0
8.0
10.0
12.5
16.0
18.0
6.2±0.3
10.2±0.3
10.2±0.3
13.5±0.5
16.5±0.5
16.5±0.5
8.3
8.3
10.3
13.5
17.0
19.0
9.5 max.
10.0 max.
12.0 max.
15.0 max.
19.0 max.
21.0 max.
3.4
3.4
3.5
4.7
5.5
6.7
0.65±0.1
0.90±0.2
0.90±0.2
0.90±0.3
1.20±0.3
1.20±0.3
2.2
3.1
4.6
4.4
6.7
6.7
0.35 +- 0.15
0.20
0.70±0.20
0.70±0.20
0.70±0.30
0.70±0.30
0.70±0.30
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 125 °C 1000 h (08×10.2 < : 2000 h)
Specification
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
100
220
330
10
470
1000
1500
2200
3300
4700
100
220
330
16
470
680
1000
2200
3300
47
100
220
25
330
470
680
1000
2200
33
47
100
35
220
330
470
680
1000
✽
0D
L
Size
code
8
8
8
8
10
10
12.5
12.5
16
16
18
18
8
8
10
10
12.5
12.5
12.5
12.5
16
16
18
18
8
8
8
8
10
10
12.5
12.5
12.5
16
16
18
18
8
8
8
8
10
10
12.5
12.5
16
16
18
18
6.2
6.2
10.2
10.2
10.2
10.2
13.5
13.5
16.5
16.5
16.5
16.5
10.2
10.2
10.2
10.2
13.5
13.5
13.5
13.5
16.5
16.5
16.5
16.5
6.2
6.2
10.2
10.2
10.2
10.2
13.5
13.5
13.5
16.5
16.5
16.5
16.5
6.2
6.2
10.2
10.2
10.2
10.2
13.5
13.5
16.5
16.5
16.5
16.5
E
(E)
F
(F)
G
(G)
H13
(H13)
J16
(J16)
K16
K16
F
(F)
G
(G)
H13
H13
H13
(H13)
J16
(J16)
K16
K16
E
(E)
F
(F)
G
(G)
H13
H13
(H13)
J16
(J16)
K16
K16
E
(E)
F
(F)
G
(G)
H13
(H13)
J16
(J16)
K16
K16
Ripple
ESR
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+125 °C)
(Ω)
(mA r.m.s.)
100
1.00
0.30
EEETG1A101P
100
1.00
0.30
EEETG1A221UP
197
0.50
0.30
EEETG1A221P
197
0.50
0.30
EEETG1A331UP
270
0.30
0.30
EEETG1A331P
270
0.30
0.30
EEETG1A471UP
800
0.12
0.30
EEVTG1A102Q
800
0.12
0.30
EEVTG1A152UQ
1100
0.08
0.32
EEVTG1A222M
1100
0.08
0.34
EEVTG1A332UM
1300
0.075
0.34
EEVTG1A332M
1300
0.075
0.36
EEVTG1A472M
197
0.50
0.23
EEETG1C101P
197
0.50
0.23
EEETG1C221UP
270
0.30
0.23
EEETG1C221P
270
0.30
0.23
EEETG1C331UP
800
0.12
0.23
EEVTG1C331Q
800
0.12
0.23
EEVTG1C471Q
800
0.12
0.23
EEVTG1C681Q
800
0.12
0.23
EEVTG1C102UQ
1100
0.08
0.23
EEVTG1C102M
1100
0.08
0.25
EEVTG1C222UM
1300
0.075
0.25
EEVTG1C222M
1300
0.075
0.27
EEVTG1C332M
100
1.00
0.18
EEETG1E470P
100
1.00
0.18
EEETG1E101UP
197
0.50
0.18
EEETG1E101P
197
0.50
0.18
EEETG1E221UP
270
0.30
0.18
EEETG1E221P
EEETG1E331UP
270
0.30
0.18
800
0.12
0.18
EEVTG1E331Q
800
0.12
0.18
EEVTG1E471Q
800
0.12
0.18
EEVTG1E681UQ
1100
0.08
0.18
EEVTG1E681M
1100
0.08
0.18
EEVTG1E102UM
1300
0.075
0.18
EEVTG1E102M
1300
0.075
0.20
EEVTG1E222M
100
1.00
0.16
EEETG1V330P
100
1.00
0.16
EEETG1V470UP
197
0.50
0.16
EEETG1V470P
197
0.50
0.16
EEETG1V101UP
270
0.30
0.16
EEETG1V101P
270
0.30
0.16
EEETG1V221UP
800
0.12
0.16
EEVTG1V331Q
800
0.12
0.16
EEVTG1V471UQ
1100
0.08
0.16
EEVTG1V471M
1100
0.08
0.16
EEVTG1V681UM
1300
0.075
0.16
EEVTG1V681M
0.075
0.16
EEVTG1V102M
1300
Min. Packaging Q'ty
Reflow
Taping
(pcs)
(2)
(2)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(3)
(3)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(2)
(2)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(2)
(2)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(3)
(3)
1000
1000
500
500
500
500
200
200
125
125
125
125
500
500
500
500
200
200
200
200
125
125
125
125
1000
1000
500
500
500
500
200
200
200
125
125
125
125
1000
1000
500
500
500
500
200
200
125
125
125
125
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”, “Q”, or “M”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 125 °C 1000 h (08×10.2 < : 2000 h)
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
10
22
33
47
50
100
220
330
470
680
1000
10
22
33
63
47
100
220
330
470
10
22
33
47
80
100
220
330
470
10
22
100
33
47
100
220
330
Min. Packaging Q'ty
Specification
✽
0D
L
Size
code
8
8
8
8
8
10
10
12.5
12.5
16
16
18
18
8
8
8
10
8
10
10
12.5
12.5
16
16
8
8
10
8
10
10
12.5
12.5
16
16
18
16
18
18
8
8
10
10
12.5
16
18
18
6.2
6.2
6.2
10.2
10.2
10.2
10.2
13.5
13.5
16.5
16.5
16.5
16.5
6.2
10.2
10.2
10.2
10.2
10.2
10.2
13.5
13.5
16.5
16.5
10.2
10.2
10.2
10.2
10.2
10.2
13.5
13.5
16.5
16.5
16.5
16.5
16.5
16.5
10.2
10.2
10.2
10.2
13.5
16.5
16.5
16.5
E
E
(E)
F
(F)
G
(G)
H13
H13
J16
(J16)
K16
K16
E
F
(F)
G
(F)
G
(G)
H13
H13
J16
J16
F
(F)
G
(F)
G
(G)
H13
(H13)
J16
(J16)
K16
(J16)
K16
K16
F
(F)
G
G
H13
J16
K16
K16
Ripple
ESR
tan d
current
Part No.
(100 kHz)
(120 Hz)
(100 kHz)
(+20 °C)
(+20 °C)
(+125 °C)
(Ω)
(mA r.m.s.)
80
1.60
0.14
EEETG1H100P
80
1.60
0.14
EEETG1H220P
80
1.60
0.14
EEETG1H330UP
133
0.75
0.14
EEETG1H330P
133
0.75
0.14
EEETG1H470UP
221
0.50
0.14
EEETG1H470P
221
0.50
0.14
EEETG1H101UP
600
0.23
0.14
EEVTG1H221Q
600
0.23
0.14
EEVTG1H331Q
900
0.15
0.14
EEVTG1H471M
900
0.15
0.14
EEVTG1H681UM
950
0.14
0.14
EEVTG1H681M
950
0.14
0.14
EEVTG1H102M
55
2.20
0.12
EEETG1J100P
100
1.00
0.12
EEETG1J220P
100
1.00
0.12
EEETG1J330UP
150
0.80
0.12
EEETG1J330P
100
1.00
0.12
EEETG1J470UP
150
0.80
0.12
EEETG1J470P
150
0.80
0.12
EEETG1J101UP
350
0.26
0.12
EEVTG1J101Q
350
0.26
0.12
EEVTG1J221Q
500
0.18
0.12
EEVTG1J331M
500
0.18
0.12
EEVTG1J471M
70
1.30
0.12
EEETG1K100P
70
1.30
0.12
EEETG1K220UP
90
1.00
0.12
EEETG1K220P
70
1.30
0.12
EEETG1K330UP
90
1.00
0.12
EEETG1K330P
90
1.00
0.12
EEETG1K470UP
250
0.42
0.12
EEVTG1K470Q
250
0.42
0.12
EEVTG1K101UQ
350
0.30
0.12
EEVTG1K101M
350
0.30
0.12
EEVTG1K221UM
400
0.28
0.12
EEVTG1K221M
350
0.30
0.12
EEVTG1K331UM
400
0.28
0.12
EEVTG1K331M
400
0.28
0.12
EEVTG1K471M
70
1.30
0.10
EEETG2A100P
70
1.30
0.10
EEETG2A220UP
90
1.00
0.10
EEETG2A220P
90
1.00
0.10
EEETG2A330P
250
0.42
0.10
EEVTG2A470Q
350
0.30
0.10
EEVTG2A101M
400
0.28
0.10
EEVTG2A221M
400
0.28
0.10
EEVTG2A331M
Reflow
Taping
(pcs)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(3)
(3)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(2)
(2)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(2)
(2)
(2)
(2)
(3)
(3)
(3)
(3)
1000
1000
1000
500
500
500
500
200
200
125
125
125
125
1000
500
500
500
500
500
500
200
200
125
125
500
500
500
500
500
500
200
200
125
125
125
125
125
125
500
500
500
500
200
125
125
125
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”, “Q”, or “M”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : Medium-size TK Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● Endurance
: 125 °C 2000 h
product is available upon request.
● RoHS compliant
● Vibration-proof
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +125 °C
10 V.DC to 100 V.DC
47 µF to 4700 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV After 2 minutes
Please see the attached characteristics list
V.DC
10 16 25 35 50 63 80 100
Z(–25 °C)/Z(+20 °C)
3
2
2
2
2
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C)
6
4
4
3
3
3
3
3
After applying rated working voltage for 2000 hours at +125 °C±2 °C and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change Within ±30 % of the initial value (Miniaturization product : Within ±35 %)
< 300 % of the initial limit (Miniaturization product : Within 350 %)
tan d
DC leakage current Within the initial limit
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
0.75
Marking
1k
0.90
10 k
0.95
100 k to
1.00
Dimensions
L
Pressure Relief
+
(P)
(I)
Series identification
Mark for Lead-Free
products
(Black dot)
A±0.2
B±0.2
Capacitance (µF)
1000
A TK
H
0D±0.5
Negative polarity
marking (–)
–
K
0.3 max.
(I)
Example : 10 V.DC 1000 µF
Marking color : BLACK
W
( ) Reference size
Rated voltage code
(Unit : mm)
Lot number
R. Voltage
10
(V.DC)
Code
A
16
25
35
50
63
C
E
V
H
J
80 100
K
2A
Size
L
A, B
H
I
0D
code
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7
W
P
K
0.90±0.3
1.20±0.3
1.20±0.3
4.4
6.7
6.7
0.70±0.3
0.70±0.3
0.70±0.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 125 °C 2000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
10
1000
1500
2200
3300
4700
330
470
680
16
1000
2200
3300
330
470
25
680
1000
2200
330
470
35
680
50
1000
220
330
470
680
63
1000
100
220
330
470
47
100
80
220
330
100
470
47
100
220
330
0D
L
12.5
12.5
16
16
18
18
12.5
12.5
12.5
12.5
16
16
18
18
12.5
12.5
12.5
16
16
18
18
12.5
12.5
16
16
18
18
12.5
12.5
16
16
18
18
12.5
12.5
16
16
12.5
12.5
16
16
18
16
18
18
12.5
16
18
18
13.5
13.5
16.5
16.5
16.5
16.5
13.5
13.5
13.5
13.5
16.5
16.5
16.5
16.5
13.5
13.5
13.5
16.5
16.5
16.5
16.5
13.5
13.5
16.5
16.5
16.5
16.5
13.5
13.5
16.5
16.5
16.5
16.5
13.5
13.5
16.5
16.5
13.5
13.5
16.5
16.5
16.5
16.5
16.5
16.5
13.5
16.5
16.5
16.5
Min. Packaging Q'ty
Specification
Ripple
✽
Size
current
code (100 kHz)
(+125 °C)
(mA r.m.s.)
H13
800
(H13)
800
J16
1100
(J16)
1100
K16
1300
K16
1300
H13
800
H13
800
H13
800
(H13)
800
J16
1100
(J16)
1100
K16
1300
K16
1300
H13
800
H13
800
(H13)
800
J16
1100
(J16)
1100
K16
1300
K16
1300
H13
800
(H13)
800
J16
1100
(J16)
1100
K16
1300
K16
1300
H13
600
H13
600
J16
900
(J16)
900
K16
950
K16
950
H13
350
H13
350
J16
500
J16
500
H13
250
(H13)
250
J16
350
(J16)
350
K16
400
(J16)
350
K16
400
K16
400
H13
250
J16
350
K16
400
K16
400
ESR
(100 kHz)
(Ω)
+20 °C
0.120
0.120
0.080
0.080
0.075
0.075
0.120
0.120
0.120
0.120
0.080
0.080
0.075
0.075
0.120
0.120
0.120
0.080
0.080
0.075
0.075
0.120
0.120
0.080
0.080
0.075
0.075
0.230
0.230
0.150
0.150
0.140
0.140
0.260
0.260
0.180
0.180
0.420
0.420
0.300
0.300
0.280
0.300
0.280
0.280
0.420
0.300
0.280
0.280
–40 °C
1.80
1.80
1.20
1.20
1.10
1.10
1.80
1.80
1.80
1.80
1.20
1.20
1.10
1.10
1.80
1.80
1.80
1.20
1.20
1.10
1.10
1.80
1.80
1.20
1.20
1.10
1.10
3.40
3.40
2.20
2.20
2.10
2.10
5.20
5.20
3.60
3.60
8.40
8.40
6.00
6.00
5.60
6.00
5.60
5.60
8.40
6.00
5.60
5.60
tan d
(120 Hz)
(+20 °C)
0.30
0.30
0.32
0.34
0.36
0.38
0.23
0.23
0.23
0.23
0.25
0.27
0.27
0.29
0.18
0.18
0.18
0.18
0.18
0.18
0.20
0.16
0.16
0.16
0.16
0.16
0.16
0.14
0.14
0.14
0.14
0.14
0.14
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.10
0.10
0.10
0.10
Part No.
Reflow
Taping
(pcs)
EEETK1A102AQ
EEETKA152UAQ
EEETK1A222AM
EEETKA332UAM
EEETK1A332AM
EEETK1A472AM
EEETK1C331AQ
EEETK1C471AQ
EEETK1C681AQ
EEETKC102UAQ
EEETK1C102AM
EEETKC222UAM
EEETK1C222AM
EEETK1C332AM
EEETK1E331AQ
EEETK1E471AQ
EEETKE681UAQ
EEETK1E681AM
EEETKE102UAM
EEETK1E102AM
EEETK1E222AM
EEETK1V331AQ
EEETKV471UAQ
EEETK1V471AM
EEETKV681UAM
EEETK1V681AM
EEETK1V102AM
EEETK1H221AQ
EEETK1H331AQ
EEETK1H471AM
EEETKH681UAM
EEETK1H681AM
EEETK1H102AM
EEETK1J101AQ
EEETK1J221AQ
EEETK1J331AM
EEETK1J471AM
EEETK1K470AQ
EEETKK101UAQ
EEETK1K101AM
EEETKK221UAM
EEETK1K221AM
EEETKK331UAM
EEETK1K331AM
EEETK1K471AM
EEETK2A470AQ
EEETK2A101AM
EEETK2A221AM
EEETK2A331AM
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(9)
(10)
(10)
(10)
(10)
(10)
(10)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
(11)
200
200
125
125
125
125
200
200
200
200
125
125
125
125
200
200
200
125
125
125
125
200
200
125
125
125
125
200
200
125
125
125
125
200
200
125
125
200
200
125
125
125
125
125
125
200
125
125
125
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “Q” or “M”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : TK Type : V
Features
● Endurance : 125 °C 3000 h
● Low ESR at –40 °C (50 % lower than TG series)
● Added ESR specification after the endurance test
● Vibration-proof product is available upon request.
● RoHS compliant
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Characteristics
at low temperature
Endurance
Shelf life
ESR after the life test
AEC-Q200
–40 °C to +125 °C
10 V.DC to 35 V.DC
47 µF to 470 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV After 2 minutes
Please see the attached characteristics list
V.DC
10
16
25
35
Z(–25 °C)/Z(+20 °C)
3
2
2
2
(Impedance ratio at 120 Hz)
Z(–40 °C)/Z(+20 °C)
4
3
3
3
After the life test with DC rated woking voltage at +125 °C ±2 °C for 3000 hours, the capacitors
shall meet the limits specified below.
Capacitance change Within ±30 % of the initial value (code U : ±35 %)
< 300 % of the initial limit (code U : ±350 %)
tan d
DC leakage current Within the initial limit
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours, ESR value shall
meet the specified below.
< 150 % of the initial limit
20 °C
After 1000 hours
< 200 % of the initial limit
–40 °C
20 °C
< 300 % of the initial limit
After 2000 hours
< 400 % of the initial limit
–40 °C
20 °C
< 1000 % of the initial limit
After 3000 hours
< 1500 % of the initial limit
–40 °C
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
0.65
100 k to
1.00
Lot number
Series identification
L
Pressure Relief (010 and larger)
Mark for Lead-Free
products
(Black dot)
A±0.2
+
(P)
(I)
220
A TK
H
0D±0.5
Capacitance (µF)
–
K
0.3 max.
Negative polarity
marking (–)
(I)
Dimensions
Example : 10 V.DC 220 µF
Marking color : BLACK
R. Voltage
(V.DC)
Code
10 k
0.95
B±0.2
Marking
1k
0.85
W
( ) Reference size
Rated voltage code
(Unit : mm)
10
16
25
35
A
C
E
V
Size
L
A, B
H
I
0D
code
F
8.0 10.2±0.3 8.3 10.0 max. 3.4
G
10.0 10.2±0.3 10.3 12.0 max. 3.5
W
P
K
0.90±0.2
0.90±0.2
3.1
4.6
0.70±0.2
0.70±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 125 °C 3000 h
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
220
10
330
470
100
16
220
330
100
25
220
330
47
35
100
220
0D
L
8
8
10
10
8
8
10
10
8
8
10
10
8
8
10
10
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
Min. Packaging Q'ty
Specification
Ripple
✽
ESR
Size
current
tan d
Part No.
(100 kHz)
code (100 kHz)
(120 Hz)
(Ω)
(+125 °C)
(+20 °C)
(mA r.m.s.) +20 °C –40 °C
F
197
0.3
5
0.30
EEETK1A221P
(F)
197
0.3
5
0.30
EEETK1A331UP
G
270
0.2
3
0.30
EEETK1A331P
(G)
270
0.2
3
0.30
EEETK1A471UP
F
197
0.3
5
0.23
EEETK1C101P
(F)
197
0.3
5
0.23
EEETK1C221UP
G
270
0.2
3
0.23
EEETK1C221P
(G)
270
0.2
3
0.23
EEETK1C331UP
F
197
0.3
5
0.18
EEETK1E101P
(F)
197
0.3
5
0.18
EEETK1E221UP
G
270
0.2
3
0.18
EEETK1E221P
(G)
270
0.2
3
0.18
EEETK1E331UP
F
197
0.3
5
0.16
EEETK1V470P
(F)
197
0.3
5
0.16
EEETK1V101UP
G
270
0.2
3
0.16
EEETK1V101P
(G)
270
0.2
3
0.16
EEETK1V221UP
Reflow
Taping
(pcs)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
(8)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
✽ Size code( ) : Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : TP Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● Lower ESR at Low temperature after endurance
● Endurance : 125 °C 3000 h (D8 size : 2000 h)
● Automotive
● Vibration-proof product is available upon request.
● RoHS compliant
(08 mm and larger)
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +125 °C
10 V.DC to 35 V.DC
47 µF to 470 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (µA) After 2 minutes
Please see the attached characteristics list
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours (D8 size : 2000 h).
the capacitors shall meet the limits specified below.
Capacitance change Within ±30 % of the initial value
< 300 % of the initial limit
tan d
DC leakage current Within the initial limit
Size Code
ESR after
D8
F
G
endurance
Initial
(+20
°C)
0.45
0.2
0.15
(Ω/100kHz)
After 2000 h (-40 °C)
40
4.5
3.5
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
0.65
100 k to
1.00
0.3 max.
+
L
(I)
Series identification
Mark for Lead-Free
products
(Black dot)
(P)
B±0.2
Capacitance (µF)
220
A TP
H
0D±0.5
Negative polarity
marking (–)
A±0.2
–
(I)
Dimensions
Example : 10 V.DC 220 µF
Marking color : BLACK
W
Pressure Relief (010 and larger)
( ) Reference size
(Unit : mm)
Rated voltage code
Lot number
R. Voltage
(V.DC)
Code
10 k
0.95
K
Marking
1k
0.85
10
16
25
35
A
C
E
V
Size
code
D8
F
G
0D
L
A, B
H
I
6.3
7.7±0.3 6.6 7.8 max. 2.6
8.0 10.2±0.3 8.3 10.0max. 3.4
10.0 10.2±0.3 10.3 12.0max. 3.5
W
0.65±0.1
0.90±0.2
0.90±0.2
P
K
1.8 0.35 +- 0.15
0.20
3.1 0.70±0.20
4.6 0.70±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 125 °C 3000 h (06.3×7.7 : 2000 h)
Specification
Case size (mm)
Rated Cap.
voltage (±20 %)
(V.DC) (µF)
220
10
330
470
100
16
25
L
8
10.2
Ripple
✽
ESR
Size
current
tan d
Part No.
(100 kHz)
code (100 kHz)
(120
Hz)
(Ω)
(+125 °C)
(+20 °C)
(mA r.m.s.) +20 °C –40 °C
F
270
0.20
3
0.30
EEETP1A221AP
Reflow
Taping
(pcs)
(8)
500
8
10.2
(F)
270
0.20
3
0.30
EEETPA331UAP
(8)
500
10
10.2
G
500
0.15
2
0.30
EEETP1A331AP
(8)
500
10
10.2
G
500
0.15
2
0.30
EEETP1A471AP
(8)
500
7.7
D8
197
0.45
5
0.23
EEETPC101XAP
(8)
900
F
270
0.20
3
0.23
EEETP1C101AP
(8)
500
6.3
8
10.2
220
8
10.2
F
270
0.20
3
0.23
EEETP1C221AP
(8)
500
330
10
10.2
G
500
0.15
2
0.23
EEETP1C331AP
(8)
500
470
10
10.2
G
500
0.15
2
0.23
EEETP1C471AP
(8)
500
500
100
8
10.2
F
270
0.20
3
0.18
EEETP1E101AP
(8)
220
10
10.2
G
500
0.15
2
0.18
EEETP1E221AP
(8)
500
330
10
10.2
G
500
0.15
2
0.18
EEETP1E331AP
(8)
500
7.7
D8
197
0.45
5
0.16
EEETPV470XAP
(8)
900
F
270
0.20
3
0.16
EEETP1V470AP
(8)
500
47
35
0D
Min. Packaging Q'ty
6.3
8
10.2
100
8
10.2
F
270
0.20
3
0.16
EEETP1V101AP
(8)
500
220
10
10.2
G
500
0.15
2
0.16
EEETP1V221AP
(8)
500
✽ Size code( ) : Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
NEW
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 125 °C 3000 h (D8 size : 2000 h)
Case size (mm)
Rated Cap.
voltage (±20 %)
(V.DC) (µF)
10
L
220
8
10.2
330
10
10.2
470
10
10.2
G
750
0.15
7.7
D8
300
0.45
100
16
25
G
750
0.15
Reflow
Taping
(pcs)
(8)
500
0.30
EEETC1A331P
(8)
500
2
0.30
EEETC1A471P
(8)
500
5
0.23
EEETC1C101XP
(8)
900
2
8
10.2
F
410
0.20
3
0.23
EEETC1C101P
(8)
500
220
8
10.2
F
410
0.20
3
0.23
EEETC1C221P
(8)
500
330
10
10.2
G
750
0.15
2
0.23
EEETC1C331P
(8)
500
470
10
10.2
G
750
0.15
2
0.23
EEETC1C471P
(8)
500
100
8
10.2
F
410
0.20
3
0.18
EEETC1E101P
(8)
500
220
10
10.2
G
750
0.15
2
0.18
EEETC1E221P
(8)
500
330
10
10.2
G
750
0.15
2
0.18
EEETC1E331P
(8)
500
7.7
D8
300
0.45
5
0.16
EEETC1V470XP
(8)
900
47
35
Ripple
ESR
Size Current
tan d
(100 kHz)
Part No.
code (100 kHz)
(120 Hz)
(Ω)
(+20 °C)
(+125 °C)
(mA r.m.s.) +20 °C –40 °C
F
410
0.20
3
0.30
EEETC1A221P
0D
6.3
Min. Packaging Q'ty
Specification
6.3
8
10.2
F
410
0.20
3
0.16
EEETC1V470P
(8)
500
100
8
10.2
F
410
0.20
3
0.16
EEETC1V101P
(8)
500
220
10
10.2
G
750
0.15
2
0.16
EEETC1V221P
(8)
500
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
NEW
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 125 °C 3000 h
Case size (mm)
Rated Cap.
voltage (±20 %)
(V.DC) (µF)
10
16
25
35
0D
L
Specification
Min. Packaging Q'ty
Ripple
ESR
Size
tan d
current
(100 kHz)
code (100 kHz)
(120 Hz)
(Ω)
(+20 °C)
(+125 °C)
(mA r.m.s.) +20 °C –40 °C
Part No.
Reflow
Taping
(pcs)
330
8
10.2
F
410
0.20
3
0.30
EEETC1A331UP
(8)
500
470
8
10.2
F
410
0.20
3
0.30
EEETC1A471UP
(8)
500
560
8
10.2
F
410
0.20
3
0.30
EEETC1A561UP
(8)
500
680
10
10.2
G
750
0.15
2
0.30
EEETC1A681UP
(8)
500
330
8
10.2
F
410
0.20
3
0.23
EEETC1C331UP
(8)
500
390
8
10.2
F
410
0.20
3
0.23
EEETC1C391UP
(8)
500
680
10
10.2
G
750
0.15
2
0.23
EEETC1C681UP
(8)
500
220
8
10.2
F
410
0.20
3
0.18
EEETC1E221UP
(8)
500
330
8
10.2
F
410
0.20
3
0.18
EEETC1E331UP
(8)
500
470
10
10.2
G
750
0.15
2
0.18
EEETC1E471UP
(8)
500
220
8
10.2
F
410
0.20
3
0.16
EEETC1V221UP
(8)
500
330
10
10.2
G
750
0.15
2
0.16
EEETC1V331UP
(8)
500
390
10
10.2
G
750
0.15
2
0.16
EEETC1V391UP
(8)
500
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : TQ Type : V
High temperature
Lead-Free reflow (suffix : A✽)
Features
● 1 size smaller and same performance compare with V-TK series
● Low ESR (85 % low ESR in low temperature after endurance compare
● Endurance : 125 °C 2000 h
● RoHS compliant
with V-TP series)
Recommended applications
● Automotive
Specifications
Category temperature range
Rated voltage range
Capacitance range
Capacitance tolerance
Leakage current
Dissipation factor (tan d)
Endurance
Shelf life
Resistance to
soldering heat
AEC-Q200
–40 °C to +125 °C
35 V.DC
47 µF to 100 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (µA) After 2 minutes
Please see the attached characteristics list
After the life test with DC rated working voltage at +125 °C±2 °C for 2000 hours,
the capacitors shall meet the limits specified below.
Capacitance change Within ±30 % of the initial value
< 300 % of the initial limit
tan d
DC leakage current Within the initial limit
Size Code
ESR after
D8
endurance
Initial (+20 °C)
0.30
(Ω/100kHz)
After 2000 h (-40 °C)
6
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
AEC-Q200 compliant
Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
0.65
10 k
0.95
100 k to
1.00
0.3 max.
–
(P)
+
L
Lot number
A±0.2
B±0.2
Series
identification
H
Capacitance (µF)
47
V TQ
0D±0.5
Negative polarity marking (–)
(I)
Example : 35 V.DC 47 µF
Marking color : BLACK
(I)
Dimensions
K
Marking
1k
0.85
W
Rated
Voltage code
( ) Reference size
(Unit : mm)
R. Voltage
(V.DC)
Code
35
V
Size
0D
code
D8
6.3
L
A, B
7.7±0.3
6.6
H
I
7.8 max. 2.6
W
P
K
0.65±0.1
1.8
0.35 +- 0.15
0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 125 °C 2000 h
Case size (mm)
Rated Cap.
voltage (±20 %)
(V.DC) (µF)
35
47
100
Specification
0D
L
Size
code
6.3
6.3
7.7
7.7
D8
D8
Ripple
current
(100 kHz)
(+125 °C)
(mA r.m.s.)
197
197
Min. Packaging Q'ty
ESR
(100 kHz)
(+20 °C)
(Ω)
tan d
(120 Hz)
(+20 °C)
0.30
0.30
0.16
0.16
Part No.
Reflow
Taping
(pcs)
EEETQV470XAP
EEETQV101XAP
(5)
(5)
900
900
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 1V → V
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Surface Mount Type
Series : EB (Large Can Size) Type : V
Features
● Endurance
● RoHS
: 105 °C 3000 h to 5000 h
compliant
Specifications
Category temperature range
–25 °C to +105 °C
Rated voltage range
160 V.DC to 450 V.DC
Capacitance range
2.2 µF to 100 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.06 CV +10 (µA) After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
V.DC
160 200 250 350 400 450
Characteristics
(Impedance ratio at 120 Hz)
at low temperature
Z(–25 °C) / Z(+20 °C)
2
2
3
5
6
6
After the life test with DC rated working voltage at +105 °C±2 °C for 5000 hours, the capacitors
shall meet the limits specified below. (Size code G13 : 3000 hours, G17 : 4000 hours)
Capacitance change Within ±20 % of the initial value
Endurance
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
Shelf life
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
Resistance to
soldering heat
tan d
Within the initial limit
DC leakage current Within the initial limit
Frequency correction factor for ripple current
Frequency (Hz)
Rated Voltage (V.DC)
160
to
250
350
to
450
120
1k
10 k < f < 30 k
30 k < f < 100 k
0.55
0.50
0.85
0.80
0.90
0.90
1.00
1.00
Capacitance (µF)
10
2C EB
K
W
( ) Reference size
(Unit : mm)
Rated voltage code
Lot number
R. Voltage
160
(V.DC)
Code
2C
+
L
Pressure Relief
Series identification
A±0.2
B±0.2
Negative polarity
marking (–)
–
H
0D±0.5
0.3 max.
(P)
Example : 160 V.DC 10 µF
Marking color : BLACK
(I)
Dimensions
(I)
Marking
200
250
350
400
450
2D
2E
2V
2G
2W
Size
code
G13
G17
H16
J16
J21
K16
K21
0D
L
10.0
10.0
12.5
16.0
16.0
18.0
18.0
13.5±0.5
16.5±0.5
16.5±0.5
16.5±0.5
21.5±0.5
16.5±0.5
21.5±0.5
A,B
H
10.3 12.0
10.3 12.0
13.5 15.0
17.0 19.0
17.0 19.0
19.0 21.0
19.0 21.0
max.
max.
max.
max.
max.
max.
max.
I
W
P
K
3.5
3.5
4.7
5.5
5.5
6.7
6.7
0.9±0.2
0.9±0.2
0.9±0.2
1.2±0.3
1.2±0.3
1.2±0.3
1.2±0.3
4.6
4.6
4.4
6.7
6.7
6.7
6.7
0.70±0.20
0.70±0.20
0.70±0.30
0.70±0.30
0.70±0.30
0.70±0.30
0.70±0.30
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
Aluminum Electrolytic Capacitors (SMD Type)
Characteristics list
Endurance : 105 °C 5000 h (G13 : 3000 h, G17 : 4000 h)
Case size (mm)
Rated
Cap.
voltage (±20 %)
(V.DC) (µF)
10
160
250
400
13.5
G13
Reflow
Taping
(4)
250
12.5
16.5
H16
470
0.15
5000
EEVEB2C330SQ
(4)
150
16
16.5
J16
600
0.15
5000
EEVEB2C470SM
(4)
125
16
21.5
J21
750
0.15
5000
EEVEB2C680M
(4)
75
18
16.5
K16
750
0.15
5000
EEVEB2C680SM
(4)
125
100
18
21.5
K21
1060
0.15
5000
EEVEB2C101M
(4)
75
10
10
16.5
G17
80
0.15
4000
EEVEB2D100Q
(4)
200
22
12.5
16.5
H16
470
0.15
5000
EEVEB2D220SQ
(4)
150
33
16
16.5
J16
600
0.15
5000
EEVEB2D330SM
(4)
125
47
18
16.5
K16
600
0.15
5000
EEVEB2D470SM
(4)
125
68
16
21.5
J21
750
0.15
5000
EEVEB2D680M
(4)
75
100
18
21.5
K21
1060
0.15
5000
EEVEB2D101M
(4)
75
10
10
16.5
G17
88
0.15
4000
EEVEB2E100Q
(4)
200
22
16
16.5
J16
560
0.15
5000
EEVEB2E220SM
(4)
125
33
18
16.5
K16
560
0.15
5000
EEVEB2E330SM
(4)
125
47
16
21.5
J21
710
0.15
5000
EEVEB2E470M
(4)
75
18
21.5
K21
990
0.15
5000
EEVEB2E680M
(4)
75
3.3
10
13.5
G13
38
0.20
3000
EEVEB2V3R3Q
(4)
250
4.7
10
16.5
G17
50
0.20
4000
EEVEB2V4R7Q
(4)
200
10
16
16.5
J16
270
0.20
5000
EEVEB2V100SM
(4)
125
22
18
16.5
K16
350
0.20
5000
EEVEB2V220SM
(4)
125
33
16
21.5
J21
480
0.20
5000
EEVEB2V330M
(4)
75
47
18
21.5
K21
670
0.20
5000
EEVEB2V470M
(4)
75
3.3
10
13.5
G13
40
0.24
3000
EEVEB2G3R3Q
(4)
250
4.7
10
16.5
G17
50
0.24
4000
EEVEB2G4R7Q
(4)
200
10
16
16.5
J16
250
0.24
5000
EEVEB2G100SM
(4)
125
22
16
21.5
J21
410
0.24
5000
EEVEB2G220M
(4)
75
33
450
Size
code
47
68
350
10
L
Min. Packaging Q'ty
33
68
200
0D
Specification
Ripple
tan d
current
Part No.
Endurance
(100 kHz) (120 Hz)
(hours)
(+105 °C) (+20 °C)
(mA r.m.s.)
70
0.15
3000
EEVEB2C100Q
18
21.5
K21
600
0.24
5000
EEVEB2G330M
(4)
75
2.2
10
13.5
G13
29
0.24
3000
EEVEB2W2R2Q
(4)
250
3.3
10
16.5
G17
41
0.24
4000
EEVEB2W3R3Q
(4)
200
12.5
16.5
H16
49
0.24
5000
EEVEB2W4R7SQ
(4)
150
10
18
16.5
K16
310
0.24
5000
EEVEB2W100SM
(4)
125
22
18
21.5
K21
560
0.24
5000
EEVEB2W220M
(4)
75
4.7
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “Q or M”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02
Mar. 2016
CAUTION AND WARNING
1. The electronic components contained in this catalog are designed and produced for use in home electric appliances, office eq uipment, information equipment,
communications equipment, and other general purpose electronic devices.
Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aeros pace equipment, disaster-prevention
equipment, security equipment, vehicles (automobile, train, vessel),
please be sure to contact our sales representative.
2. When applying one of these components for equipment requiring a high degree of safety, no matter what sort of application it might be, be sure to install a protective
circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility.
3. When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on thespecifications with us in advance.
4. Technical information contained in this catalog is intended to convey examples of typical performances and/or applications a nd is not intended to make any
warranty with respect to the intellectual property rights or any other related rights of our company or any third parties nor grant any license under such rights.
5. In order to export products in this catalog, the exporter may be subject to the export license requirement under the Foreign Exchange and Foreign Trade Law of
Japan.
6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing processes of Automotive & Ind ustrial Systems Company, Panasonic
Corporation.
Please contact
Factory
The information in this catalog is valid as of December 2015.
Similar pages