S30814-Q992-B target datasheet Inrush current resistor 400 Ω / 200 Ws Features Outline ● Ultra low profile thick-film on cheramic ● 2kW peak power ● Easy spring fixing heatsink mountable ● Ideal for dynamic braking ● Available with fast-on terminals ● Pulse handling capability ● Non-flammable construction ● Optional preapplied phase-change material aaaaaa a available Specification Parameter Symbol Resistance Condition Value R Tolerance Unit 400 Ω ±20 % Energy E P max=2kW/100ms; T h=100°C, f=50N (pressure to heatsink) 200 Ws Power P T h=100°C, f=50N (pressure to heatsink) 100 W Isolation Voltage Vt Isolation to heatsink 4000 V Construction Notes: Repetitive energy on heatsink 200Ws mounted on heatsink with preapplied phase change material with no forced air cooling (T h =100°C, T a=25°C) Mounted with spring recommended spring force: min. 50N press down / fixing is recommended in the middle of the cover substrate on a minimum of dia. 7mm circular area. Recommended surface roughness of the heatsink: Rz < 0.01mm Copyright Vincotech 1 27 Oct. 2015 / Revision 1 S30814-Q992-B target datasheet Qualification Planned Qualification Technology Qualification Test Item Temperature Shock (TS) Test Conditions Standard T STGmin / T STGmax.: -40°C / +125°C DIN EN 60068-2-14 100 cycles Test Na t dwell =30min (dwell time at each temperature) MIL-STD-883E t change <30sec (temperature change time) Method 1010 Component Qualification Test Item Test Conditions High Temperature T STG =T jmax Storage (HTS) T STG =125°C Standard DIN EN 60068-2-2 t =1000h (2*500h) High Humidity T STG =85°C; RH=85% DIN EN 60068-2-67 High Temperature Storage (HHHTS) t =1000h (2*500h) Electrical Characteristics Qualification in progress Mechanical Dimension [mm] Copyright Vincotech 2 27 Oct. 2015 / Revision 1 S30814-Q992-B target datasheet Ordering Code & Marking Version Ordering Code without thermal paste S30814-Q992-B Q992-B with thermal paste S30814-Q992-B-/3/ Q992-B-/3/ Q992-B 12345 51 0514 Text in DataMatrix as in packaging barcode as Name Ver Lot Q992-B 51 12345 Date code 0514 Copyright Vincotech 3 27 Oct. 2015 / Revision 1 S30814-Q992-B target datasheet Packaging instruction Standard packaging quantity (SPQ) 294 >SPQ Standard <SPQ Sample Handling instruction For handling instructions see vincotech.com website. Document No.: Date: S30814-Q992-B-T1-14 27 Oct. 2015 Modification: Pages Product status definition Datasheet Status Product Status Target Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information, specifications, procedures, methods and recommendations herein (together “information”) are presented by Vincotech to reader in good faith, are believed to be accurate and reliable, but may well be incomplete and/or not applicable to all conditions or situations that may exist or occur. Vincotech reserves the right to make any changes without further notice to any products to improve reliability, function or design. No representation, guarantee or warranty is made to reader as to the accuracy, reliability or completeness of said information or that the application or use of any of the same will avoid hazards, accidents, losses, damages or injury of any kind to persons or property or that the same will not infringe third parties rights or give desired results. It is reader’s sole responsibility to test and determine the suitability of the information and the product for reader’s intended use. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Copyright Vincotech 4 27 Oct. 2015 / Revision 1