Overview FAX Communication Module The FAX communication module consists of SoC with built-in modem, flash memory for program area and network control circuit. This module is designed to equip the MFP with fax communication function easily. It controls various communication by commands from main system via the USB or Serial interface. Main Specifications 1.Basic specification (FAX) Modem Speed Modulation Communication Mode Number of Chanel : : : : 2.Sending Scanning Resolution (mm) Scanning Resolution (inch) Maximum transmission Width : 16 x 15.4, 8 x 15.4, 8 x 7.7 , 8 x 3.85 (dot/mm x line/mm) : 600 x 600dpi : A3 33600bps with auto fallback to 2400bps V.34, V.17, V.29, V.27ter ITU-T G3 Standard Machine（SuperG3 / G3） Single PSTN Line 3.Receiving Printing Resolution (mm) : 16 x 15.4, 8 x 15.4, 8 x 7.7 , 8 x 3.85 (dot/mm x line/mm) Printing Resolution (inch) : 600 x 600dpi Maximum transmission Width : A3 4. Image Processing Codec (JBIG / MMR / MR / MH), Changing the image size, Changing the image resolution Board Specifications Host System I/F Host Command I/F Power supply voltage Board size : : : : USB or Serial I/F (TTL level), Power supply AT Command （FAX Class2, with original command） 5V ±0.25V, 3.3V ±0.3V 80mm(L) x 108mm(W) x 25mm(H) Optional Specifications Function : Line monitor, Telephone function support I/F specification : Single power supply (5V), USB HS Device (Bus power) External View / Interface Connectors Main Board Power supply Serial I/F (UART) USB * Note: The product photo is not final. Design and specifications are each subject to change without notice. Please ask for the latest Product Standards to guarantee the satisfaction of your product requirements. No reproduction or republication without written permission. Panasonic System Networks Co., Ltd. http://industrial.panasonic.com As of Jan, 2014