Catalog of "Conductive Polymer Hybrid Aluminum Electrolytic Capacitors (Surface Mount Type)": Posted

2014
CATALOG
Electrolytic Capacitors
(Conductive Polymer Hybrid Aluminum Electrolytic Capacitors)
2014.11 industrial.panasonic.com/ww/
.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Small can type Aluminum Electrolytic Capacitors
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA
Surface Mount Type
Series:
ZA
Type:
V
High temperature Lead-Free reflow
■ Features
● Endurance: 10000 h at 105 °C
● Low ESR and High ripple current
(70 % over, Lower ESR than Current V-FP)
● High voltage (to 80 V)
● Equivalent to conductive polymer type Aluminum Electrolytic Capacitor
(There are little characteristics change by temperature and frequency)
● Vibration-proof product is available upon request. (08 mm and larger)
● AEC-Q200 qualified ✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
Capacitance Tolerance
–55 °C to +105 °C
25 V.DC to 80 V.DC
10 μF to 330 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater)
DC Leakage Current
Please see the attached Standard Products list
The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +105 °C for 10000
hours. After stabilizing at room temperature(+15 to 35 °C), the capacitor shall not exceed the specified limits.
(The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.)
Capacitance change
±30 % of initial measured value
tan d
< 200 % of initial specified value
E. S. R.
< 200 % of initial specified value
DC leakage current
< initial specified value
Size Code
ESR after Endurance
C
D
D8
F
G
(Ω/100 kHz) (–40 °C)
2.0
1.4
0.8
0.4
0.3
tan d
Endurance
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf Life
After applying rated working voltage for 2000 hours at +85 °C±2 °C / 85% to 90%RH and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change
±30 % of initial measured value
tan d
< 200 % of initial specified value
E. S. R.
< 200 % of initial specified value
DC leakage current
< initial specified value
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change
±10 % of initial measured value
tan d
< initial specified value
DC leakage current
< initial specified value
Damp Heat (Load)
Resistance to
Soldering Heat
■ Dimensions in mm (not to scale)
Series identification
L
Pressure Relief (010 and larger)
Rated Voltage Mark
Size
code
Lot number
Rated Voltage Mark
E
V
H
25 V
35 V
50 V
J
K
63 V
80 V
D
L
A, B
C
5.0 5.8±0.3 5.3
D
6.3 5.8±0.3 6.6
D8 6.3 7.7±0.3 6.6
F
8.0 10.2±0.3 8.3
G 10.0 10.2±0.3 10.3
K
(P)
Capacitance (μF)
+
(I)
0D±0.5
Negative polarity marking (–)
33
E ZA
A±0.2
–
(I)
0.3 max.
Marking color : BLACK
H
Example:25 V 33 μF
(Unit : mm)
B±0.2
■ Marking
W
( ) Reference size
H
I
W
P
K
6.5 max.
7.8 max.
7.8 max.
10.0 max.
12.0 max.
2.2
2.6
2.6
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.5
1.8
1.8
3.1
4.6
0.15
0.35 +- 0.20
+ 0.15
0.35 - 0.20
0.15
0.35 +- 0.20
0.70±0.2
0.70±0.2
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Dec. 2014
– EEE-2 –
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA
■ Standard Products Endurance : 105 °C 10000 h
Case size
W.V.
(V)
25
35
50
63
80
Cap.
(±20 %)
(μF)
33
Dia.
Length
(mm)
5
(mm)
5.8
Min.
Packaging Q'ty
Specification
Size
Code
C
Ripple
Current
(100 kHz)
(+105 °C)
(mA r.m.s.)
900
E.S.R.
tan d
(100 kHz)
(+20 °C)
(mΩ)
80
(120 Hz)
(+20 °C)
0.14
Part No.
Reflow
(RoHS:compliant)
EEHZA1E330R
Taping
(5)
(pcs)
1000
56
6.3
5.8
D
1300
50
0.14
EEHZA1E560P
(5)
1000
100
6.3
7.7
D8
2000
30
0.14
EEHZA1E101XP
(5)
900
220
8
10.2
F
2300
27
0.14
EEHZA1E221P
(6)
500
330
10
10.2
G
2500
20
0.14
EEHZA1E331P
(6)
500
22
5
5.8
C
900
100
0.12
EEHZA1V220R
(5)
1000
27
6.3
5.8
D
1300
60
0.12
EEHZA1V270P
(5)
1000
47
6.3
5.8
D
1300
60
0.12
EEHZA1V470P
(5)
1000
68
6.3
7.7
D8
2000
35
0.12
EEHZA1V680XP
(5)
900
500
150
8
10.2
F
2300
27
0.12
EEHZA1V151P
(6)
270
10
10.2
G
2500
20
0.12
EEHZA1V271P
(6)
500
10
5
5.8
C
750
120
0.10
EEHZA1H100R
(5)
1000
22
6.3
5.8
D
1100
80
0.10
EEHZA1H220P
(5)
1000
33
6.3
7.7
D8
1600
40
0.10
EEHZA1H330XP
(5)
900
500
68
8
10.2
F
1800
30
0.10
EEHZA1H680P
(6)
100
10
10.2
G
2000
28
0.10
EEHZA1H101P
(6)
500
5.8
D
1000
120
0.08
EEHZA1J100P
(5)
1000
900
10
6.3
22
6.3
7.7
D8
1500
80
0.08
EEHZA1J220XP
(5)
33
8
10.2
F
1700
40
0.08
EEHZA1J330P
(6)
500
56
10
10.2
G
1800
30
0.08
EEHZA1J560P
(6)
500
22
8
10.2
F
1550
45
0.08
EEHZA1K220P
(6)
500
33
10
10.2
G
1700
36
0.08
EEHZA1K330P
(6)
500
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”.
■ Frequency correction factor for ripple current
Capacitance Frequency
0.1 0.12 0.2 0.3
(μF)
(kHz)
C < 47
0.10 0.10 0.10 0.15
Correction
47 < C < 150
0.15 0.15 0.20 0.25
factor
150 < C
0.15 0.15 0.25 0.25
0.5
1
2
3
5
10
15
20
30
40
50
100 300 500 1000
0.20 0.30 0.40 0.45 0.50 0.60 0.65 0.70 0.75 0.80 0.85 1.00 1.00 1.05 1.05
0.30 0.40 0.45 0.55 0.60 0.70 0.75 0.80 0.80 0.85 0.90 1.00 1.00 1.00 1.00
0.30 0.45 0.50 0.60 0.65 0.75 0.80 0.85 0.85 0.85 0.90 1.00 1.00 1.00 1.00
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03 Dec. 2014
– EEE-3 –
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor/ZC
Surface Mount Type
Series:
ZC
Type:
V
High temperature Lead-Free reflow
■ Features
● Endurance: 4000 h at 125 °C
(The longest endurance in the industry by each case size)
● Low ESR and High ripple current (85% over, Lower ESR than Current V-TP)
● High-withstand voltage (25 V to 63 V),Low LC(0.01 CV or 3 μA)
● Equivalent to conductive polymer type Aluminum Electrolytic Capacitor
(There are little characteristics change by temperature and frequency)
● Vibration-proof product is available upon request. (08 mm and larger).
● AEC-Q200 qualified ✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
Capacitance Tolerance
–55 °C to +125 °C
25 V.DC to 63 V.DC
10 μF to 330 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater)
DC Leakage Current
Please see the attached Standard Products list
The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +125 °C for 4000
hours. After stabilizing at room temperature(+15 to 35 °C), the capacitor shall not exceed the specified limits.
(The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.)
Capacitance change
±30 % of initial measured value
tan d
< 200 % of initial specified value
E. S. R.
< 200 % of initial specified value
DC leakage current
< initial specified value
Size Code
ESR after Endurance
C
D
D8
F
G
(Ω/100 kHz) (–40 °C)
2.0
1.4
0.8
0.4
0.3
tan d
Endurance
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf Life
After applying rated working voltage for 2000 hours at +85 °C±2 °C / 85% to 90%RH and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change
±30 % of initial measured value
tan d
< 200 % of initial specified value
E. S. R.
< 200 % of initial specified value
DC leakage current
< initial specified value
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change
±10 % of initial measured value
tan d
< initial specified value
DC leakage current
< initial specified value
Damp Heat (Load)
Resistance to
Soldering Heat
■ Dimensions in mm (not to scale)
Series identification
L
Pressure Relief (010 and larger)
Rated Voltage Mark
Lot number
Rated Voltage Mark
E
V
H
J
25 V
35 V
50 V
63 V
Size
code
D
L
A, B
C
5.0 5.8±0.3 5.3
D
6.3 5.8±0.3 6.6
D8 6.3 7.7±0.3 6.6
F
8.0 10.2±0.3 8.3
G 10.0 10.2±0.3 10.3
(I)
(P)
H
0D±0.5
Capacitance (μF)
33
E ZC
A±0.2
–
+
(I)
Marking color : BLACK
Negative polarity marking (–)
(Unit : mm)
K
Example:25 V 33 μF
0.3 max.
B±0.2
■ Marking
W
( ) Reference size
H
I
W
P
K
6.5 max.
7.8 max.
7.8 max.
10.0 max.
12.0 max.
2.2
2.6
2.6
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.5
1.8
1.8
3.1
4.6
0.15
0.35 +- 0.20
+ 0.15
0.35 - 0.20
0.15
0.35 +- 0.20
0.70±0.2
0.70±0.2
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Mar. 2014
– EEE-4 –
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor/ZC
■ Standard Products Endurance : 125 °C 4000 h
Case size
W.V.
(V)
25
35
50
63
Cap.
(±20 %)
(μF)
33
Dia.
Length
(mm)
5
(mm)
5.8
Min.
Packaging Q'ty
Specification
Size
Code
C
Ripple
Current
(100 kHz)
(+125 °C)
(mA r.m.s.)
550
E.S.R.
tan d
(100 kHz)
(+20 °C)
(mΩ)
80
(120 Hz)
(+20 °C)
0.14
Part No.
Reflow
(RoHS:compliant)
EEHZC1E330R
Taping
(5)
(pcs)
1000
56
6.3
5.8
D
900
50
0.14
EEHZC1E560P
(5)
1000
100
6.3
7.7
D8
1400
30
0.14
EEHZC1E101XP
(5)
900
220
8
10.2
F
1600
27
0.14
EEHZC1E221P
(6)
500
330
10
10.2
G
2000
20
0.14
EEHZC1E331P
(6)
500
22
5
5.8
C
550
100
0.12
EEHZC1V220R
(5)
1000
47
6.3
5.8
D
900
60
0.12
EEHZC1V470P
(5)
1000
68
6.3
7.7
D8
1400
35
0.12
EEHZC1V680XP
(5)
900
150
8
10.2
F
1600
27
0.12
EEHZC1V151P
(6)
500
270
10
10.2
G
2000
20
0.12
EEHZC1V271P
(6)
500
10
5
5.8
C
500
120
0.10
EEHZC1H100R
(5)
1000
22
6.3
5.8
D
750
80
0.10
EEHZC1H220P
(5)
1000
33
6.3
7.7
D8
1100
40
0.10
EEHZC1H330XP
(5)
900
68
8
10.2
F
1250
30
0.10
EEHZC1H680P
(6)
500
100
10
10.2
G
1600
28
0.10
EEHZC1H101P
(6)
500
10
6.3
5.8
D
700
120
0.08
EEHZC1J100P
(5)
1000
22
6.3
7.7
D8
900
80
0.08
EEHZC1J220XP
(5)
900
33
8
10.2
F
1100
40
0.08
EEHZC1J330P
(6)
500
56
10
10.2
G
1400
30
0.08
EEHZC1J560P
(6)
500
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”.
■ Frequency correction factor for ripple current
Capacitance Frequency
0.1 0.12 0.2 0.3
(μF)
(kHz)
C < 47
0.10 0.10 0.10 0.15
Correction
0.15 0.15 0.20 0.25
47 < C < 150
factor
150 < C
0.15 0.15 0.25 0.25
0.5
1
2
3
5
10
15
20
30
40
50
100 300 500 1000
0.20 0.30 0.40 0.45 0.50 0.60 0.65 0.70 0.75 0.80 0.85 1.00 1.00 1.05 1.05
0.30 0.40 0.45 0.55 0.60 0.70 0.75 0.80 0.80 0.85 0.90 1.00 1.00 1.00 1.00
0.30 0.45 0.50 0.60 0.65 0.75 0.80 0.85 0.85 0.85 0.90 1.00 1.00 1.00 1.00
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Mar. 2014
– EEE-5 –
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Notices matter
■ Law and regulation which are applied
● This product complies with the RoHS Directive (Restriction of the use of certain Hazardous substances in electrical
and electronic equipment (DIRECTIVE 2011/65/EU).
● No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in producing
this product.
● We do not PBBs or PBDEs as brominated flame retardants.
● Export procedure which followed export related regulations, such as foreign exchange and a foreign trade method,
on the occasion of export of this product Thank you for your consideration.
■ Usage limitation
● This capacitor is designed to be used for electronics circuits such as audio/visual equipment, home appliances,
computers and other office equipment, optical equipment, measuring equipment.
High reliability and safety are required [ be / a possibility that incorrect operation of this product may do harm to a
human life or property ] more. When use is considered by the use, the delivery specifications which suited the use
separately need to be exchanged.
Items to be observed
● This specification guarantees the quality and performance of the product as individual components.
Before use, check and evaluate their compatibility with installed in your products.
● Do not use the products beyond the specifications described in this document.
■ When using this capacitor in a product where safety is critical
● Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other signification damage, such as damage
to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/ gas equipment, rotating rotating equipment, and disaster/crime prevention equipment.
・ The system is equipped with a protection circuit and protection device.
・ The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event of a
single fault.
■ Conditions of use
● Before using the products, carefully check the effects on their quality and performance, and determined whether or
not they can be used. These products are designed and manufactured for general-purpose and standard use in
general electronic equipment. These products are not intended for use in the following special conditions.
(1) In liquid, such as Water, Oil, Chemicals, or Organic solvent.
(2) In direct sunlight, outdoors, or in dust.
(3) In vapor, such as dew condensation water of resistive element, or water leakage, salty air, or air with a high
concentration corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2.
(4) In an environment where strong static electricity or electromagnetic waves exist.
(5) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near these
products.
(6) Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin
and other material.
(7) Using resolvent, water or water-soluble cleaner for flux cleaning agent after soldering.
(In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues)
(8) Using in the atmosphere which strays Acid or alkaline.
(9) Using in the atmosphere which there are excessive vibration and shock.
● Please arrange circuit design for preventing impulse or transitional voltage.
Do not apply voltage, which exceeds the full rated voltage when the capacitors receive impulse voltage, instantaneous
high voltage, high pulse voltage etc.
● Electrolyte is used in the products. Therefore, misuse can result in rapid deterioration of characteristics and functions
of each product. Electrolyte leakage damages printed circuit and affects performance, characteristics, and functions
of customer system.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
! Application Guidelines
1. Circuit Design
1.1 Operating Temperature and Frequency
Electrical parameters for electrolytic capacitors are normally specified at 20 ℃ temperature and 120 Hz frequency.
These parameters vary with changes in temperature and frequency. Circuit designers should take these changes
into consideration.
(1) Effects of operating temperature on electrical parameters
(a) At higher temperatures, leakage current and capacitance increase while equivalent series resistance (ESR)
decreases.
(b) At lower temperatures, leakage current and capacitance decrease while equivalent series resistance (ESR)
increases.
(2) Effects of frequency on electrical parameters
(a) At higher frequencies, capacitance and impedance decrease while tanδ increases.
(b) At lower frequencies, heat generated by ripple current will rise due to an increase in equivalent series
resistance (ESR).
1.2 Operating Temperature and Life Expectancy
(1) Expected life is affected by operating temperature. Generally, each 10 ℃ reduction in temperature will double the
expected life. Use capacitors at the lowest possible temperature below the upper category temperature.
(2) If operating temperatures exceed the upper category limit, rapid deterioration of electrical parameter will occur and
irreversible damage will result.
Check for the maximum capacitor operating temperatures including ambient temperature, internal capacitor
temperature rise due to ripple current, and the effects of radiated heat from power transistors, IC's or resistors.
Avoid placing components, which could conduct heat to the capacitor from the back side of the circuit board.
(3) The formula for calculating expected life at lower operating temperatures is as follows ;
L2 = L1×2
T1–T2
10
L1: Guaranteed life (h) at temperature, T1 ℃
L2: Expected life (h) at temperature, T2 ℃
T1: Upper category temperature (℃)
T2: Actual operating temperature, ambient temperature + temperature rise due to ripple current heating(℃)
(4) Please use according to the lifetime as noted in this specification. Using products beyond end of the lifetime may
change characteristics rapidly, short-circuit, operate pressure relief vent, or leak electrolyte.
1.3 Common Application Conditions to Avoid
The following misapplication load conditions will cause rapid deterioration of a capacitor’s electrical parameters.
In addition, rapid heating and gas generation within the capacitor can occur, causing the pressure relief vent to operate
and resultant leakage of electrolyte. Under extreme conditions, explosion and fire ignition could result.
The leaked electrolyte is combustible and electrically conductive.
(1) Reverse Voltage
DC capacitors have polarity. Therefore, please do not apply the reverse voltage. Verify correct polarity before
insertion.
(2) Charge / Discharge Applications
Standard capacitors are not suitable for use in repeating charge/discharge applications. For charge/ discharge
applications, consult us with your actual application condition.
For rush current, please to nor exceed 100A.
(3) ON-OFF circuit
Do not use capacitors in circuit where ON-OFF switching is repeated more than 10000 times/per day.
In case of applying to the theses ON-OFF circuit, consult with us about circuit condition and so on.
(4) Over voltage
Do not apply voltages exceeding the maximum specified rated voltage. Voltages up to the surge voltage rating are
acceptable for short periods of time.
Ensure that the sum of the DC voltage and the superimposed AC ripple voltage does not exceed the rated voltage
(5) Ripple Current
Do not apply ripple currents exceeding the maximum specified value. For high ripple current applications, use a
capacitor designed for high ripple currents. In addition, consult us if the applied ripple current is to be higher than
the maximum specified value. Ensure that rated ripple currents that superimposed on low DC bias voltages do
not cause reverse voltage conditions. Even if it is within a rated ripple current, in case the practical use is over the
pre described endurance life time, it causes the increase of deterioration of ESR characteristic and the internal
generation heat by ripple current. Due to this, there is some possibility of vent open, bulging of sleeve and rubber,
electrolyte leakage, and shot circuit, explosion and ignition in the worst case.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
1.4 Using Two or More Capacitors in Parallel
The circuit resistance can closely approximate the series resistance of the capacitor, causing an imbalance of
ripple current loads within the capacitors. Careful wiring methods can minimize the possible application of an
excessive ripple current to a capacitor. Moreover, please do not use it in series.
1.5 Capacitor Mounting Considerations
(1) Double-Sided Circuit Boards
Avoid wiring pattern runs, which pass between the mounted capacitor and the circuit board.
(2) Clearance for Case Mounted Pressure Relief (≧ Dia. 10 mm)
Capacitors with case mounted pressure relief require sufficient clearance to allow for proper pressure relief
operation. The minimum clearance are dependent on capacitor diameters as follows.
・ ≧ Dia. 10 mm : 2mm minimum
(3) Wiring Near the Pressure Relief (≧ Dia. 10 mm)
Avoid locating high voltage or high current wiring or circuit board paths above the pressure relief . Flammable,
high temperature gas that exceeds 100゚C may be released which could dissolve the wire insulation and ignite.
(4) Circuit Board Patterns Under the Capacitor
Avoid circuit board runs under the capacitor, as an electrical short can occur due to an electrolyte leakage.
1.6 Electrical Isolation of the Capacitor
Completely isolate the capacitor as follows.
・ Between the cathode and the case and between the anode terminal and other circuit paths.
1.7 Capacitor Sleeve
The laminate coating is intended for marking and identification purposes and is not meant to electrically insulate the
capacitor.
2. Capacitor Handling Techniques
2.1 Considerations Before Using
(1) Capacitors have a finite life. Do not reuse or recycle capacitors from used equipment.
(2) Transient recovery voltage may be generated in the capacitor due to dielectric absorption.
If required, this voltage can be discharged with a resistor with a value of about 1kΩ.
(3) Capacitors stored for a long period of time may exhibit an increase in leakage current.
This can be corrected by gradually applying rated voltage in series with a resistor of approximately 1kΩ.
(4) If capacitors are dropped, they can be damaged mechanically or electrically. Avoid using dropped capacitors.
(5) Dented or crushed capacitors should not be used.
The seal integrity can be damaged and loss of electrolyte/ shortened life can result.
2.2 Capacitor Insertion
(1)
(2)
(3)
(4)
Verify the correct capacitance and rated voltage of the capacitor.
Verify the correct polarity of the capacitor before insertion.
Verify the correct hole spacing and land pattern size before insertion to avoid stress on the terminals.
Excessive mounting pressure can cause high leakage current, short circuit, or disconnection.
2.3 Reflow Soldering
(1) Surface-mount type capacitor are exclusively for reflow soldering.
When reflow solder is used an ambient heat condition system such as the simultaneous use of infrared and
hot-air is recommended.
(2) Observe proper soldering conditions (temperature, time, etc.). Do not exceed the specified limits.
✽ The Temperature on Capacitor top shall be measured by using thermal couple that is fixed firmly by epoxy glue.
(3) In case of use in 2times reflow, 2nd reflow must be done when the capacitor’s temperature return back to normal
level.
(4) In our recommended reflow condition , the case discoloration and the case swelling might be slightly generated.
But please acknowledge that these two phenomena do not influence the reliability of the product.
(5) The crack on top marking might be occurred by reflow heat stress.
But please acknowledge that it does not influence the reliability of the product.
(6) VPS (Vapor Phase Soldering) reflow can cause significant characteristics change and/ or mounting failure due to
deformation by acute temperature rise.
VPS is acceptable provided that the process does not exceed recommended reflow profile and temperature rise
is less than 3degC/sec.
Please contact Panasonic for detailed conditions.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
2.4 Manual Soldering
(1) Observe temperature and time soldering specifications or do not exceed temperature of 350 ℃ for 3 seconds or
less.
(2) If a soldered capacitor must be removed and reinserted, avoid excessive stress on the capacitor leads.
(3) Avoid physical contacts between the tip of the soldering iron and capacitors to prevent or capacitor failure.
2.5 Capacitor Handling after Soldering
(1) Avoid moving the capacitor after soldering to prevent excessive stress on the lead wires where they enter the seal.
(2) Do not use the capacitor as a handle when moving the circuit board assembly.
(3) Avoid striking the capacitor after assembly to prevent failure due to excessive shock.
2.6 Circuit Board Cleaning
(1) Circuit boards can be immersed or ultrasonically cleaned using suitable cleaning solvents for up to 5 minutes
and up to 60 ℃ maximum temperatures. The boards should be thoroughly rinsed and dried.
The use of ozone depleting cleaning agents is not recommended for the purpose of protecting our environment.
(2) Avoid using the following solvent groups unless specifically allowed in the specification ;
(a) Halogenated cleaning solvents : except for solvent resistant capacitor types, halogenated solvents can
permeate the seal and cause internal capacitor corrosion and failure.
For solvent resistant capacitors, carefully follow the temperature and time requirements based on the
specification. 1-1-1 trichloroethane should never be used on any aluminum electrolytic capacitor.
(b) Alkaline solvents
: could react and dissolve the aluminum case.
(c) Petroleum based solvents : deterioration of the rubber seal could result.
(d) Xylene
: deterioration of the rubber seal could result.
(e) Acetone
: removal of the ink markings on the vinyl sleeve could result.
(3) A thorough drying after cleaning is required to remove residual cleaning solvents that may be trapped between the
capacitor and the circuit board. Avoid drying temperatures, which exceed the Upper category temperature of the
capacitor.
(4) Monitor the contamination levels of the cleaning solvents during use in terms of electrical conductivity, pH, specific
gravity, or water content.
Chlorine levels can rise with contamination and adversely affect the performance of the capacitor.
(5) Depending on the cleaning method, the marking on a capacitor may be erased or blurred.
Please consult us if you are not certain about acceptable cleaning solvents or cleaning methods.
2.7 Mounting Adhesives and Coating Agents
When using mounting adhesives or coating agents to control humidity, avoid using materials containing halogenated
solvents.
Also, avoid the use of chloroprene based polymers.
Harden on dry adhesive or coating agents well lest the solvent should be left.
After applying adhesives or coatings, dry thoroughly to prevent residual solvents from being trapped between the
capacitor and the circuit board.
2.8 Fumigation
In exporting electronic appliances with aluminum electrolytic capacitors, in some cases fumigation treatment using
such halogen compound as methyl bromide is conducted for wooden boxes.
If such boxes are not dried well, the halogen left in the box is dispersed while transported and enters in the capacitors
inside.
This possibly causes electrical corrosion of the capacitors. Therefore, after performing fumigation and drying make
sure that no halogen is left.
Don’t perform fumigation treatment to the whole electronic appliances packed in a box.
3. Precautions for using capacitors
3.1 Environmental Conditions
Capacitors should not be stored or used in the following environments.
(1) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor.
(2) Direct contact with water, salt water, or oil.
(3) High humidity conditions where water could condense on the capacitor.
(4) Exposure to toxic gases such as hydrogen sulfide, sulfuric acid, nitric acid, chlorine, Chlorine compound,
Bromine, Bromine compound or ammonia.
(5) Exposure to ozone, radiation, or ultraviolet rays.
(6) Vibration and shock conditions exceeding specified requirements.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
3.2 Electrical Precautions
(1) Avoid touching the terminals of a capacitor as a possible electric shock could result. The exposed aluminum case
is not insulated and could also cause electric shock if touched.
(2) Avoid short circuiting the area between the capacitor terminals with conductive materials including liquids such as
acids or alkaline solutions.
(3) A low-molecular-weight-shiroxane which is included in a silicon material shall causes abnormal electrical
characteristics.
4. Emergency Procedures
(1) If the pressure relief of the capacitor operates, immediately turn off the equipment and disconnect from the power
source.
This will minimize an additional damage caused by the vaporizing electrolyte.
(2) Avoid contact with the escaping electrolyte gas, which can exceed 100 ℃ temperatures.
If electrolyte or gas enters the eye, immediately flush the eye with large amounts of water.
If electrolyte or gas is ingested by mouth, gargle with water.
If electrolyte contacts the skin, wash with soap and water.
5. Long Term Storage
Leakage current of a capacitor increases with long storage times. The aluminum oxide film deteriorates as a
function of temperature and time.
If used without reconditioning, an abnormally high current will be required to restore the oxide film.
This surge current could cause the circuit or the capacitor to fail.
Storage period is one year. When storage period is over 12 months, a capacitor should be reconditioned by applying
the rated voltage in series with a 1000 Ω current limiting resistor for a time period of 30 minutes.
For storage condition, keep room temperature (5℃ to 35℃) and humidity (45% to 85%) where direct sunshine
doesn't reach.
5.1 Environmental Conditions
(1)
(2)
(3)
(4)
Exposure to temperatures above the upper category or below the lower category temperature of the capacitor.
Direct contact with water, salt water, or oil.
High humidity conditions where water could condense on the capacitor.
Exposure to toxic gases such as hydrogen sulfide, sulfuric acid, nitric acid, chlorine, Chlorine compound, Bromine,
Bromine compound or ammonia.
(5) Exposure to ozone, radiation, or ultraviolet rays.
(6) Vibration and shock conditions exceeding specified requirements.
6. Capacitor Disposal
When disposing capacitors, use one of the following methods.
(1) Incinerate after crushing the capacitor or puncturing the can wall (to prevent explosion due to internal pressure rise).
(2) Dispose as solid waste.
NOTE : Local laws may have specific disposal requirements which must be followed.
* Intellectual property right
We, Panasonic Group are providing the product and service that customers can use without anxiety, and are working positively
on the protection of our products under intellectual property rights.
Representative patents relating to Conductive Polymer Hybrid Aluminum Electrolytic Capacitors are as follows:
US Patent Nos. 7497879 and 7621970 JP Patent No. 5360250
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
■ Reflow guaranteed condition
Parts upper part temperature
● RoHS compliant
Peak temperature
250
200
160℃
Time in (✽1) ℃ or more
150
120 sec
100
Refl ow No.
Category
Peak temperature
Time in peak
temperature
Fig. (5)
φ5, φ6.3
260℃ (255℃)
≧ 250℃ 5 s
(10 s)
≧ 230℃ 30 s
≧ 217℃ 40 s
≧ 200℃ 70 s
2 times
Time in (✽1) °C
or more
50
Time of refl ow
Time
Fig. (6)
φ8, φ10
245℃
260℃
≧ 240℃ 10 s
≧ 250℃ 5 s
≧ 230℃ 30 s
≧ 217℃ 40 s
≧ 200℃ 70 s
2 times
≧ 230℃ 30 s
≧ 217℃ 40 s
≧ 200℃ 70 s
1 time
✽ For refl ow, use a thermal condition system such as infrared radiation (IR) or hot blast.
✽ Panasonic have several series available for pure Tin terminal and ZVEI refl ow based
on J-STD-020D (JEDEC). (Please contact sales for details.)
■ Land/Pad Pattern
The circuit board land/pad pattern size for chip capacitors is specifi ed in the following table.
The land pitch infl uences installation strength and consider it.
[Table of Board Land Size vs. Capacitor Size]
b
C (φ5)
D (φ6.3)
D8 (φ6.3×7.7L)
F (φ8×10.2L)
G (φ10×10.2L)
b
a
Land space
(Unit : mm)
a
b
c
1.5
1.8
1.8
3.1
4.6
2.8
3.2
3.2
4.0
4.1
1.6
1.6
1.6
2.0
2.0
Size
✽ When size “A” is wide, back fillet can be made,
decreasing fitting strength.
c
✽ Take mounting conditions, solderability and fi tting strength into consideration when selecting parts for your company’s design.
■ Packaging Specifications
● Reel Dimensions in mm (not to scale)
● Dimensions of Outer Carton Box
W±1
2.0±0.5
φ13.0±0.5
Size code
C,D
D8
F,G
Min.Packing Q'ty pcs.
1000
900
500
H±5
φ50 min
L±5
φ21.0±0.8
● Min.Packing Quantity
W±5
3.0
φ380±2
(Unit : mm)
Size code
C
D,D8
F,G
(Unit : mm)
Size code
C
D,D8
F,G
W
14
18
26
H
220
250
220
W,L
395
395
395
P±0.1
D±0.2
C±0.5
0.4
B+0.3
-0.2
φ1.5+0.1
0
F±0.1
4.0±0.1
W±0.3
2.0±0.1
.75±0.1
● Taping Dimensions in mm
Size code
C
D
D8
F
G
A
5.7
7.0
7.0
8.7
10.7
B
5.7
7.0
7.0
8.7
10.7
C
8.0
9.0
9.0
12.5
14.5
D
6.4
6.4
8.4
11.0
11.0
P
12.0
12.0
12.0
16.0
16.0
F
5.5
7.5
7.5
11.5
11.5
A±0.2
✽ Ask factory for technical specifi cations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
W
12.0
16.0
16.0
24.0
24.0
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
EEHZA1E330R
25V33μF
φ5x5.8
・・・ ZA-2
EEHZA1E560P
25V56μF
φ6.3x5.8
・・・ ZA-3
EEHZA1E101XP
25V100μF
φ6.3x7.7
・・・ ZA-4
EEHZA1E221P
25V220μF
φ8x10.2
・・・ ZA-5
EEHZA1E331P
25V330μF
φ10x10.2
・・・ ZA-6
EEHZA1V220R
35V22μF
φ5x5.8
・・・ ZA-7
EEHZA1V270P
35V27μF
φ6.3x5.8
・・・ ZA-8
EEHZA1V470P
35V47μF
φ6.3x5.8
・・・ ZA-9
EEHZA1V680XP
35V68μF
φ6.3x7.7
・・・ ZA-10
EEHZA1V151P
35V150μF
φ8x10.2
・・・ ZA-11
EEHZA1V271P
35V270μF
φ10x10.2
・・・ ZA-12
EEHZA1H100R
50V10μF
φ5x5.8
・・・ ZA-13
EEHZA1H220P
50V22μF
φ6.3x5.8
・・・ ZA-14
EEHZA1H330XP
50V33μF
φ6.3x7.7
・・・ ZA-15
EEHZA1H680P
50V68μF
φ8x10.2
・・・ ZA-16
EEHZA1H101P
50V100μF
φ10x10.2
・・・ ZA-17
EEHZA1J100P
63V10μF
φ6.3x5.8
・・・ ZA-18
EEHZA1J220XP
63V22μF
φ6.3x7.7
・・・ ZA-19
EEHZA1J330P
EEHZA1J560P
63V33μF
63V56μF
φ8x10.2
φ10x10.2
・・・ ZA-20
・・・ ZA-21
EEHZA1K220P
EEHZA1K330P
80V22μF
80V33μF
φ8x10.2
φ10x10.2
・・・ ZA-22
・・・ ZA-23
- ZA-1 -
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1E330R
φ5.0×5.8 mm / 25 V / 33 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 25 V
33 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
80 mΩ max. (at 100 kHz)
900 mArms max.
(at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
ZA
H
φD±0.5
⊖
(at 120 Hz)
8.2 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: C
Capacitance (μF)
Series Identification
0.14 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
5.0
5.8±0.3
5.3
6.5 max.
2.2
0.65±0.10
1.5
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
1000
Cap.
Frequency - Cap., tanδ
100
tanδ
ESL
100
Cap.
100
ESL
1
1
0.1
10
1
0.1
ESR
tanδ
1
0.01
10
10
C (μF)
10
0.1
0.01
0.001
100
1k
10 k
100 k
0.001
10 M
1M
0.1
100
1k
10 k
Osc. Level: 1.0 Vrms (at no load)
Temperature - Cap., tanδ
tanδ
0.50
-40 ºC
-25 ºC
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.20
-20
0.01
10 M
-55 ºC
1000
tanδ
ESR (Ω)
40
1M
Temperature - ESR
⊿Cap.
50
100 k
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Cap. Change (%)
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.15
tan
-30
0.10
-40
0.1
0.05
-50
-60
-40
-20
0
20
40
60
80
100
0.00
120
0.01
100
1k
10 k
100 k
1M
Frequency (Hz)
Temperature (℃)
Typical Cirve
- ZA-2 -
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
ZA series
Part Number: EEHZA1E560P
φ6.3×5.8 mm / 25 V / 56 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 25 V
56 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
50 mΩ max. (at 100 kHz)
1300 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
14 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D
Capacitance (μF)
Series Identification
0.14 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
5.8±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
|z|
Cap.
100
10
ESL
1
1
0.1
10
1
tanδ
10
C (μF)
10
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
1
ESR
0.01
0.001
100
0.1
tanδ
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
0.45
30
0.40
20
0.35
10
0.30
0
0.25
Cap.
0.20
-20
-40 ºC
1000
40
-10
-55 ºC
Temperature - ESR
⊿Cap.
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
85 ºC
10
105 ºC
1
0.15
-30
0.10
tan
-40
0.1
0.05
-50
-60
-40
-20
0
20
40
60
80
100
0.00
120
0.01
100
1k
Temperature (℃)
Typical Cirve
- ZA-3 -
10 k
Frequency (Hz)
100 k
1M
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1E101XP
φ6.3×7.7 mm / 25 V / 100 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 25 V
100 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
30 mΩ max. (at 100 kHz)
2000 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
25.0 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D8
Capacitance (μF)
Series Identification
0.14 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
7.7±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
|z|
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
ESL
100
|z|
Cap.
100
10
10
ESL
1
1
0.1
C (μF)
10
ESL (nH)
|z| (Ω), ESR (Ω)
100
10
1
0.1
0.01
tanδ
1
ESR
0.001
100
0.1
0.01
1k
10 k
100 k
0.001
10 M
1M
0.1
100
1k
10 k
Frequency (Hz)
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0.25
-10
0.20
-20
1M
Temperature - ESR
⊿Cap.
0.01
10 M
-55 ºC
1000
-40 ºC
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
100 k
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
0
100
tanδ
tanδ
1000
Frequency - |z|, ESR, ESL
85 ºC
10
105 ºC
1
0.15
tan
-30
0.10
-40
0.1
0.05
-50
-60
-40
-20
0
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-4 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1E221P
φ8.0×10.2 mm / 25 V / 220 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 25 V
220 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
27 mΩ max. (at 100 kHz)
2300 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
55.0 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: F
Capacitance (μF)
Series Identification
0.14 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
8.0
10.2±0.3
8.3
10.0 max.
3.4
0.9±0.2
3.1
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
|z|
ESR
1000
100
10
10
100
tanδ
ESL
100
Cap.
Frequency - Cap., tanδ
1000
Cap.
ESL
1
0.1
C (μF)
|z|
1
ESL (nH)
|z| (Ω), ESR (Ω)
100
10
10
1
tanδ
0.1
1
ESR
0.01
0.001
100
0.1
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
1M
Temperature - ESR
⊿Cap.
tanδ
0.45
30
0.40
20
0.35
10
0.30
Cap.
0.25
-10
0.20
-20
-40 ºC
0.50
40
0.01
10 M
-55 ºC
1000
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
100 k
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
0
tanδ
1000
Frequency - |z|, ESR, ESL
85 ºC
10
105 ºC
1
0.15
tan
-30
0.10
-40
0.1
0.05
-50
-60
-40
-20
0
20
40
60
80
100
0.00
120
0.01
100
1k
Temperature (℃)
Typical Cirve
- ZA-5 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1E331P
φ10.0×10.2 mm / 25 V / 330 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 25 V
330 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
20 mΩ max. (at 100 kHz)
2500 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
82.5 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: G
Capacitance (μF)
Series Identification
0.14 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
10.0
10.2±0.3
10.3
12.0 max.
3.5
0.9±0.2
4.6
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
Cap.
ESL
|z|
1
1
0.1
10
1
tanδ
0.1
1
ESR
0.01
0.001
100
10
10
C (μF)
10
ESL (nH)
|z| (Ω), ESR (Ω)
100
tanδ
100
0.1
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
tan
-30
0.10
-40
-55 ºC
1000
-40 ºC
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-40
-20
0
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-6 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1V220R
φ5.0×5.8 mm / 35 V / 22 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 35 V
22 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
100 mΩ max. (at 100 kHz)
900 mArms max.
(at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
7.7 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: C
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
5.0
5.8±0.3
5.3
6.5 max.
2.2
0.65±0.10
1.5
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
10
10
1
0.1
ESR
tanδ
1
0.01
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
tanδ
0.45
30
0.40
20
0.35
10
0.30
Cap.
0.25
-10
0.20
-20
-40 ºC
0.50
40
0
-55 ºC
1000
⊿Cap.
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
85 ºC
10
105 ºC
1
0.15
-30
0.10
tan
-40
0.1
0.05
-50
-60
-40
-20
0
20
40
60
80
100
0.00
120
0.01
100
1k
10 k
100 k
1M
Frequency (Hz)
Temperature (℃)
Typical Cirve
- ZA-7 -
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1V270P
φ6.3×5.8 mm / 35 V / 27 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 35 V
27 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
60 mΩ max. (at 100 kHz)
1300 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
ZA
H
φD±0.5
⊖
(at 120 Hz)
9.4 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
5.8±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000 1000
Cap.
Frequency - Cap., tanδ
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
|z| (Ω), ESR (Ω)
10
10
1
0.1
ESR
tanδ
1
0.01
tanδ
|z|
ESL (nH)
100
0.1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-8 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1V470P
φ6.3×5.8 mm / 35 V / 47 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 35 V
47 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
60 mΩ max. (at 100 kHz)
1300 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
16.4 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
5.8±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
Cap.
100
ESL
1
1
0.1
10
1
0.1
ESR
tanδ
1
0.01
10
10
C (μF)
10
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
0.45
30
0.40
20
0.35
10
0.30
Cap.
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-40 ºC
1000
40
0
-55 ºC
Temperature - ESR
⊿Cap.
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
60
80
100
0.00
120
0.01
100
1k
Temperature (℃)
Typical Cirve
- ZA-9 -
10 k
Frequency (Hz)
100 k
1M
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1V680XP
φ6.3×7.7 mm / 35 V / 68 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 35 V
68 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
35 mΩ max. (at 100 kHz)
2000 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
23.8 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D8
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
7.7±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
|z|
10
1
1
0.1
10
1
0.1
ESR
tanδ
1
0.01
tanδ
10
ESL
C (μF)
10
|z| (Ω), ESR (Ω)
Cap.
100
ESL (nH)
100
0.1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
tanδ
0.45
30
0.40
20
0.35
10
0.30
Cap.
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-40 ºC
0.50
40
0
-55 ºC
1000
⊿Cap.
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
60
80
100
0.00
120
0.01
100
Temperature (℃)
1k
Typical Cirve
- ZA-10 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1V151P
φ8.0×10.2 mm / 35 V / 150 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 35 V
150 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
27 mΩ max. (at 100 kHz)
2300 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
52.5 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: F
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
8.0
10.2±0.3
8.3
10.0 max.
3.4
0.9±0.2
3.1
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
1000
|z|
ESR
1000
100
ESL
1
1
0.1
10
10
C (μF)
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
Cap.
100
10
10
1
0.1
tanδ
1
ESR
0.01
0.001
100
100
tanδ
ESL
100
Cap.
Frequency - Cap., tanδ
1000
tanδ
Osc. Level: 0.5 Vrms (at no load)
Frequency - |z|, ESR, ESL
0.1
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-11 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1V271P
φ10.0×10.2 mm / 35 V / 270 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 35 V
270 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
20 mΩ max. (at 100 kHz)
2500 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
94.5 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: G
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
10.0
10.2±0.3
10.3
12.0 max.
3.5
0.9±0.2
4.6
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
Cap.
ESL
|z|
1
1
0.1
10
1
tanδ
0.1
1
ESR
0.01
0.001
100
10
10
C (μF)
10
ESL (nH)
|z| (Ω), ESR (Ω)
100
tanδ
100
0.1
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
0
0.25
Cap.
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-12 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1H100R
φ5.0×5.8 mm / 50 V / 10 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 50 V
10 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
120 mΩ max. (at 100 kHz)
750 mArms max.
(at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
ZA
H
φD±0.5
⊖
(at 120 Hz)
5 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: C
Capacitance (μF)
Series Identification
0.1 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
5.0
5.8±0.3
5.3
6.5 max.
2.2
0.65±0.10
1.5
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
|z|
ESR
|z|
Cap.
Frequency - Cap., tanδ
1000 1000
100
tanδ
ESL
100
100
10
10
1
1
0.1
C (μF)
ESL
ESL (nH)
|z| (Ω), ESR (Ω)
100
10
Cap.
10
1
tanδ
1000
Frequency - |z|, ESR, ESL
0.1
ESR
1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
0.1
tanδ
0.01
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-55 ºC
1000
-40 ºC
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-40
-20
0
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-13 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1H220P
φ6.3×5.8 mm / 50 V / 22 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 50 V
22 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
80 mΩ max. (at 100 kHz)
1100 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
11 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D
Capacitance (μF)
Series Identification
0.10 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
5.8±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
10
10
1
0.1
0.01
0.001
100
tanδ
1
ESR
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.45
30
0.40
20
0.35
10
0.30
Cap.
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-45 ºC
0.50
40
0
-55 ºC
Temperature - ESR
1000
⊿Cap.
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
60
80
100
0.00
120
0.01
100
1k
Temperature (℃)
10 k
Frequency (Hz)
100 k
1M
Typical Cirve
- ZA-14 -
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1H330XP
φ6.3×7.7 mm / 50 V / 33 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 50 V
33 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
40 mΩ max. (at 100 kHz)
1600 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
16.5 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D8
Capacitance (μF)
Series Identification
0.10 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
7.7±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
10
10
1
0.1
0.01
0.001
100
tanδ
1
ESR
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-15 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1H680P
φ8.0×10.2 mm / 50 V / 68 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 50 V
68 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
30 mΩ max. (at 100 kHz)
1800 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
ZA
H
φD±0.5
⊖
(at 120 Hz)
34 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: F
Capacitance (μF)
Series Identification
0.1 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
8.0
10.2±0.3
8.3
10.0 max.
3.4
0.9±0.2
3.1
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
Cap.
Frequency - Cap., tanδ
1000 1000
100
tanδ
ESL
100
1
1
0.1
C (μF)
ESL
10
10
ESL (nH)
10
|z| (Ω), ESR (Ω)
Cap.
100
|z|
10
1
tanδ
100
0.1
1
ESR
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
0.1
tanδ
0.01
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-16 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1H101P
φ10.0×10.2 mm / 50 V / 100 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 50 V
100 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
28 mΩ max. (at 100 kHz)
2000 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
50 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: G
Capacitance (μF)
Series Identification
0.1 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
10.0
10.2±0.3
10.3
12.0 max.
3.5
0.9±0.2
4.6
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
100
1
1
0.1
10
Cap.
10
C (μF)
ESL
10
ESL (nH)
|z| (Ω), ESR (Ω)
|z|
10
1
0.1
0.01
0.001
100
tanδ
1
ESR
tanδ
100
0.1
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-17 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1J100P
φ6.3×5.8 mm / 63 V / 10 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 63 V
10 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
120 mΩ max. (at 100 kHz)
1000 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
6.3 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D
Capacitance (μF)
Series Identification
0.08 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
5.8±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
100
|z|
ESR
|z|
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
1
1
0.1
10
10
C (μF)
ESL
ESL (nH)
|z| (Ω), ESR (Ω)
100
10
Cap.
10
1
tanδ
1000
Frequency - |z|, ESR, ESL
0.1
ESR
1
0.01
0.1
tanδ
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Temperature - ESR
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-40 ºC
0.50
40
Cap.
-55 ºC
1000
⊿Cap.
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
60
80
100
0.00
120
0.01
100
1k
10 k
100 k
1M
Frequency (Hz)
Temperature (℃)
Typical Cirve
- ZA-18 -
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1J220XP
φ6.3×7.7 mm / 63 V / 22 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 63 V
22 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
80 mΩ max. (at 100 kHz)
1500 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
ZA
H
φD±0.5
⊖
(at 120 Hz)
13.8 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D8
Capacitance (μF)
Series Identification
0.08 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
7.7±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
Cap.
Frequency - Cap., tanδ
1000 1000
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
|z| (Ω), ESR (Ω)
10
10
1
tanδ
|z|
ESL (nH)
100
0.1
1
ESR
0.01
0.001
100
1k
0.1
tanδ
0.01
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-19 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1J330P
φ8.0×10.2 mm / 63 V / 33 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 63 V
33 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
40 mΩ max. (at 100 kHz)
1700 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
20.7 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: F
Capacitance (μF)
Series Identification
0.08 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
8.0
10.2±0.3
8.3
10.0 max.
3.4
0.9±0.2
3.1
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
10
10
1
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
1
ESR
0.01
0.1
tanδ
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.45
30
0.40
20
0.35
10
0.30
Cap.
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-40 ºC
0.50
40
0
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
60
80
100
0.00
120
0.01
100
Temperature (℃)
1k
Typical Cirve
- ZA-20 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1J560P
φ10.0×10.2 mm / 63 V / 56 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 63 V
56 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
30 mΩ max. (at 100 kHz)
1800 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
35.2 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: G
Capacitance (μF)
Series Identification
0.08 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
10.0
10.2±0.3
10.3
12.0 max.
3.5
0.9±0.2
4.6
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
|z|
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
ESL
100
100
Cap.
100
1
1
0.1
10
10
C (μF)
ESL
10
ESL (nH)
|z| (Ω), ESR (Ω)
|z|
10
1
0.1
0.001
100
tanδ
1
ESR
0.01
0.1
0.01
1k
10 k
100 k
0.001
10 M
1M
0.1
100
1k
10 k
Frequency (Hz)
Osc. Level: 1.0 Vrms (at no load)
50
tanδ
30
0.40
20
0.35
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
C
1
0.1
0.05
-50
-60
-40 ºC
0.50
0.45
0.01
10 M
-55 ºC
1000
40
10
1M
Temperature - ESR
⊿Cap.
tanδ
ESR (Ω)
Temperature - Cap., tanδ
100 k
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Cap. Change (%)
100
tanδ
tanδ
1000
Frequency - |z|, ESR, ESL
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-21 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1K220P
φ8.0×10.2 mm / 80 V / 22 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 80 V
22 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
45 mΩ max. (at 100 kHz)
1550 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZA
⊖
(at 120 Hz)
17.6 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: F
Capacitance (μF)
Series Identification
0.08 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
8.0
10.2±0.3
8.3
10.0 max.
3.4
0.9±0.2
3.1
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
|z|
ESR
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
|z|
100
1000
100
1
1
0.1
10
Cap.
10
C (μF)
ESL
ESL (nH)
|z| (Ω), ESR (Ω)
100
10
10
1
0.1
ESR
tanδ
1
0.01
tanδ
1000
Frequency - |z|, ESR, ESL
0.1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-22 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZA series
Part Number: EEHZA1K330P
φ10.0×10.2 mm / 80 V / 33 μF / 105 ℃, 10000 h
-55 to 105 ℃
DC 80 V
33 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
36 mΩ max. (at 100 kHz)
1700 mArms max. (at 100 kHz, 105 ℃)
105 ℃, 10000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
ZA
H
φD±0.5
⊖
(at 120 Hz)
26.4 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: G
Capacitance (μF)
Series Identification
0.08 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
10.0
10.2±0.3
10.3
12.0 max.
3.5
0.9±0.2
4.6
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
Cap.
Frequency - Cap., tanδ
1000 1000
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
|z| (Ω), ESR (Ω)
10
10
1
0.1
ESR
tanδ
1
0.01
tanδ
|z|
ESL (nH)
100
0.1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
1
0.1
0.05
-50
-60
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
Temperature (℃)
60
80
100
0.00
120
0.01
100
1k
Typical Cirve
- ZA-23 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
EEHZC1E330R
25V33μF
φ5x5.8
・・・ ZC-2
EEHZC1E560P
25V56μF
φ6.3x5.8
・・・ ZC-3
EEHZC1E101XP
25V100μF
φ6.3x7.7
・・・ ZC-4
EEHZC1E221P
25V220μF
φ8x10.2
・・・ ZC-5
EEHZC1E331P
25V330μF
φ10x10.2
・・・ ZC-6
EEHZC1V220R
35V22μF
φ5x5.8
・・・ ZC-7
EEHZC1V470P
35V47μF
φ6.3x5.8
・・・ ZC-8
EEHZC1V680XP
35V68μF
φ6.3x7.7
・・・ ZC-9
EEHZC1V151P
35V150μF
φ8x10.2
・・・ ZC-10
EEHZC1V271P
35V270μF
φ10x10.2
・・・ ZC-11
EEHZC1H100R
50V10μF
φ5x5.8
・・・ ZC-12
EEHZC1H220P
50V22μF
φ6.3x5.8
・・・ ZC-13
EEHZC1H330XP
50V33μF
φ6.3x7.7
・・・ ZC-14
EEHZC1H680P
50V68μF
φ8x10.2
・・・ ZC-15
EEHZC1H101P
50V100μF
φ10x10.2
・・・ ZC-16
EEHZC1J100P
63V10μF
φ6.3x5.8
・・・ ZC-17
EEHZC1J220XP
63V22μF
φ6.3x7.7
・・・ ZC-18
EEHZC1J330P
63V33μF
φ8x10.2
・・・ ZC-19
EEHZC1J560P
63V56μF
φ10x10.2
・・・ ZC-20
- ZC-1 -
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1E330R
φ5.0×5.8 mm / 25 V / 33 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 25 V
33 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
.
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
80 mΩ max. (at 100 kHz)
550 mArms max.
(at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
8.2 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: C
Capacitance (μF)
Series Identification
0.14 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
5.0
5.8±0.3
5.3
6.5 max.
2.2
0.65±0.10
1.5
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
Cap.
100
ESL
1
1
0.1
10
1
0.1
ESR
tanδ
1
0.01
10
10
C (μF)
10
0.1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
Osc. Level: 1.0 Vrms (at no load)
50
Temperature - ESR
tanδ
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-40
-20
0
20
40
60
80
100
120
0.00
140
0.01
10 M
-55 ºC
-40 ºC
0.50
40
-60
1M
1000
⊿Cap.
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
100 k
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Cap. Change (%)
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
85 ºC
10
105 ºC
125 ºC
1
0.1
0.01
100
Temperature (℃)
1k
Typical Cirve
- ZC-2 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1E560P
φ6.3×5.8 mm / 25 V / 56 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 25 V
56 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
50 mΩ max. (at 100 kHz)
900 mArms max.
(at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
14 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D
Capacitance (μF)
Series Identification
0.14 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
5.8±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
|z|
Cap.
100
10
ESL
1
1
0.1
10
1
tanδ
10
C (μF)
10
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
1
ESR
0.01
0.001
100
1k
0.1
tanδ
0.01
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-60
-40
-20
0
20
40
60
Temperature (℃)
80
100
120
-55 ºC
Temperature - ESR
⊿Cap.
0.00
140
-40 ºC
1000
-25 ºC
0 ºC
100
20 ºC
85 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
10
105 ºC
125 ºC
1
0.1
0.01
100
1k
Typical Cirve
- ZC-3 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1E101XP
φ6.3×7.7 mm / 25 V / 100 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 25 V
100 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
30 mΩ max. (at 100 kHz)
1400 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
ZC
H
φD±0.5
⊖
(at 120 Hz)
25 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D8
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
5.8±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000 1000
Cap.
Frequency - Cap., tanδ
100
tanδ
ESL
100
10
ESL
1
1
0.1
10
1
0.1
0.01
0.001
100
1k
tanδ
1
ESR
tanδ
10
C (μF)
10
|z| (Ω), ESR (Ω)
Cap.
100
|z|
ESL (nH)
100
0.1
0.01
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-60
-40
-20
0
20
40
60
Temperature (℃)
80
100
120
-55 ºC
Temperature - ESR
⊿Cap.
0.00
140
-40 ºC
1000
-25 ºC
0 ºC
100
20 ºC
85 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
10
105 ºC
125 ºC
1
0.1
0.01
100
1k
Typical Cirve
- ZC-4 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1E221P
φ8.0×10.2 mm / 25 V / 220 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 25 V
220 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
27 mΩ max. (at 100 kHz)
1600 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
55 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: F
Capacitance (μF)
Series Identification
0.14 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
8.0
10.2±0.3
8.3
10.0 max.
3.4
0.9±0.2
3.1
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
|z|
Frequency - |z|, ESR, ESL
ESR
1000
100
10
10
100
tanδ
Cap.
ESL
100
Cap.
Frequency - Cap., tanδ
1000
ESL
1
0.1
C (μF)
|z|
1
ESL (nH)
|z| (Ω), ESR (Ω)
100
10
10
1
tanδ
0.1
1
ESR
0.01
0.001
100
1k
0.1
0.01
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-40
-20
0
20
40
60
Temperature (℃)
80
100
120
1M
0.00
140
0.01
10 M
-55 ºC
Temperature - ESR
⊿Cap.
-40 ºC
1000
-25 ºC
0 ºC
100
20 ºC
85 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
100 k
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
-60
tanδ
1000
10
105 ºC
125 ºC
1
0.1
0.01
100
1k
Typical Cirve
- ZC-5 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1E331P
φ10.0×10.2 mm / 25 V / 330 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 25 V
330 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
20 mΩ max. (at 100 kHz)
2000 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
82.5 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: G
Capacitance (μF)
Series Identification
0.14 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
10.0
10.2±0.3
10.3
12.0 max.
3.5
0.9±0.2
4.6
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
Cap.
ESL
|z|
1
1
0.1
10
1
tanδ
0.1
1
ESR
0.01
0.001
100
10
10
C (μF)
10
ESL (nH)
|z| (Ω), ESR (Ω)
100
tanδ
100
0.1
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-55 ºC
1000
-40 ºC
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
85 ºC
10
105 ºC
125 ºC
1
0.1
0.05
-50
-60
-40
-20
0
20
40
60
Temperature (℃)
80
100
120
0.00
140
0.01
100
1k
Typical Cirve
- ZC-6 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1V220R
φ5.0×5.8 mm / 35 V / 22 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 35 V
22 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
100 mΩ max. (at 100 kHz)
550 mArms max.
(at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
7.7 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: C
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
5.0
5.8±0.3
5.3
6.5 max.
2.2
0.65±0.10
1.5
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
1000
Cap.
Frequency - Cap., tanδ
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
10
10
1
0.1
ESR
tanδ
1
0.01
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-60
-40
-20
0
20
40
60
Temperature (℃)
80
100
120
0.00
140
-55 ºC
1000
-40 ºC
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
85 ºC
10
105 ºC
125 ºC
1
0.1
0.01
100
1k
Typical Cirve
- ZC-7 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1V470P
φ6.3×5.8 mm / 35 V / 47 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 35 V
47 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
.
Lot Number
( ):
Rated Voltage Mark
60 mΩ max. (at 100 kHz)
900 mArms max.
(at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
16.4 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
5.8±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
Cap.
100
ESL
1
1
0.1
10
1
0.1
ESR
tanδ
1
0.01
10
10
C (μF)
10
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
tan
-30
0.10
-40
-55 ºC
Temperature - ESR
⊿Cap.
-40 ºC
1000
-25 ºC
0 ºC
100
20 ºC
85 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
10
105 ºC
125 ºC
1
0.1
0.05
-50
-60
-40
-20
0
20
40
60
Temperature (℃)
80
100
120
0.00
140
0.01
100
1k
Typical Cirve
- ZC-8 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1V680XP
φ6.3×7.7 mm / 35 V / 68 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 35 V
68 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
35 mΩ max. (at 100 kHz)
1400 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
23.8 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D8
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
7.7±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
|z|
Cap.
100
10
1
1
0.1
10
1
0.1
ESR
tanδ
1
0.01
tanδ
10
ESL
C (μF)
10
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-40
-20
0
20
40
60
80
100
120
-40 ºC
-25 ºC
0.50
40
-60
-55 ºC
Temperature - ESR
1000
⊿Cap.
0.00
140
0 ºC
100
20 ºC
85 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
10
105 ºC
125 ºC
1
0.1
0.01
100
Temperature (℃)
1k
Typical Cirve
- ZC-9 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1V151P
φ8.0×10.2 mm / 35 V / 150 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 35 V
150 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
27 mΩ max. (at 100 kHz)
1600 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
52.5 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: F
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
8.0
10.2±0.3
8.3
10.0 max.
3.4
0.9±0.2
3.1
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
1000
|z|
ESR
1000
100
ESL
1
1
0.1
10
10
C (μF)
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
Cap.
100
10
10
1
0.1
0.001
100
1k
tanδ
1
ESR
0.01
100
tanδ
ESL
100
Cap.
Frequency - Cap., tanδ
1000
tanδ
Osc. Level: 0.5 Vrms (at no load)
Frequency - |z|, ESR, ESL
0.1
0.01
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
tan
-30
0.10
-40
-55 ºC
Temperature - ESR
⊿Cap.
-40 ºC
1000
-25 ºC
0 ºC
100
20 ºC
85 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
10
105 ºC
125 ºC
1
0.1
0.05
-50
-60
-40
-20
0
20
40
60
Temperature (℃)
80
100
120
0.00
140
0.01
100
1k
Typical Cirve
- ZC-10 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1V271P
φ10.0×10.2 mm / 35 V / 270 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 35 V
270 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
20 mΩ max. (at 100 kHz)
2000 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
94.5 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: G
Capacitance (μF)
Series Identification
0.12 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
10.0
10.2±0.3
10.3
12.0 max.
3.5
0.9±0.2
4.6
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
Cap.
ESL
|z|
1
1
0.1
10
1
tanδ
0.1
1
ESR
0.01
0.001
100
1k
10
10
C (μF)
10
ESL (nH)
|z| (Ω), ESR (Ω)
100
tanδ
100
0.1
0.01
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-60
-40
-20
0
20
40
60
80
100
120
-40 ºC
0.50
40
-50
-55 ºC
1000
0.00
140
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
tanδ
ESR (Ω)
Temperature - Cap., tanδ
105 ºC
125 ºC
1
0.1
0.01
100
1k
Temperature (℃)
10 k
100 k
1M
Frequency (Hz)
Typical Cirve
- ZC-11 -
Jun. 2013
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1H100R
φ5.0×5.8 mm / 50 V / 10 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 50 V
10 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
120 mΩ max. (at 100 kHz)
500 mArms max.
(at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
ZC
H
φD±0.5
⊖
(at 120 Hz)
5 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: C
Capacitance (μF)
Series Identification
0.1 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
5.0
5.8±0.3
5.3
6.5 max.
2.2
0.65±0.10
1.5
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
|z|
ESR
|z|
Cap.
Frequency - Cap., tanδ
1000 1000
100
tanδ
ESL
100
100
10
10
1
1
0.1
C (μF)
ESL
ESL (nH)
|z| (Ω), ESR (Ω)
100
10
Cap.
10
1
tanδ
1000
Frequency - |z|, ESR, ESL
0.1
ESR
1
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
0.1
tanδ
0.01
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
125 ºC
1
0.1
0.05
-50
-60
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
60
Temperature (℃)
80
100
120
0.00
140
0.01
100
1k
Typical Cirve
- ZC-12 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1H220P
φ6.3×5.8 mm / 50 V / 22 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 50 V
22 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
80 mΩ max. (at 100 kHz)
750 mArms max.
(at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
11 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D
Capacitance (μF)
Series Identification
0.10 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
5.8±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
10
10
1
0.1
0.01
0.001
100
tanδ
1
ESR
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
⊿Cap.
tanδ
0.45
30
0.40
20
0.35
10
0.30
Cap.
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
125 ºC
1
0.1
0.05
-50
-60
-45 ºC
0.50
40
0
-55 ºC
1000
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
60
80
100
0.00
120
0.01
100
1k
Temperature (℃)
10 k
100 k
1M
Frequency (Hz)
Typical Cirve
- ZC-13 -
Jun. 2013
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1H330XP
φ6.3×7.7 mm / 50 V / 33 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 50 V
33 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
40 mΩ max. (at 100 kHz)
1100 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
16.5 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D8
Capacitance (μF)
Series Identification
0.10 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
7.7±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
10
10
1
0.1
0.01
0.001
100
tanδ
1
ESR
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
0.01
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
Cap.
0
0.25
-10
0.20
-20
0.15
-30
0.10
tan
-40
-40
-20
0
-40 ºC
1000
-25 ºC
0 ºC
100
20 ºC
85 ºC
10
105 ºC
125 ºC
1
0.1
0.05
-50
-60
-55 ºC
Temperature - ESR
⊿Cap.
tanδ
ESR (Ω)
Temperature - Cap., tanδ
20
40
60
Temperature (℃)
80
100
120
0.00
140
0.01
100
1k
Typical Cirve
- ZC-14 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1H680P
φ8.0×10.2 mm / 50 V / 68 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 50 V
68 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
30 mΩ max. (at 100 kHz)
1250 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
ZC
H
φD±0.5
⊖
(at 120 Hz)
34 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: F
Capacitance (μF)
Series Identification
0.1 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
8.0
10.2±0.3
8.3
10.0 max.
3.4
0.9±0.2
3.1
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
Cap.
Frequency - Cap., tanδ
1000 1000
100
tanδ
ESL
100
1
1
0.1
C (μF)
ESL
10
10
ESL (nH)
10
|z| (Ω), ESR (Ω)
Cap.
100
|z|
10
1
tanδ
100
0.1
1
ESR
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
0.1
tanδ
0.01
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-60
-40
-20
0
20
40
60
Temperature (℃)
80
100
120
-55 ºC
Temperature - ESR
⊿Cap.
0.00
140
-40 ºC
1000
-25 ºC
0 ºC
100
20 ºC
85 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
10
105 ºC
125 ºC
1
0.1
0.01
100
1k
Typical Cirve
- ZC-15 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1H101P
φ10.0×10.2 mm / 50 V / 100 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 50 V
100 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
28 mΩ max. (at 100 kHz)
1600 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
50 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: G
Capacitance (μF)
Series Identification
0.1 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
10.0
10.2±0.3
10.3
12.0 max.
3.5
0.9±0.2
4.6
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
100
1
1
0.1
10
Cap.
10
C (μF)
ESL
10
ESL (nH)
|z| (Ω), ESR (Ω)
|z|
10
1
0.1
0.01
0.001
100
1k
tanδ
1
ESR
tanδ
100
0.1
0.01
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Temperature - Cap., tanδ
50
tanδ
0.50
-55 ºC
1000
-40 ºC
-25 ºC
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-60
-40
-20
0
20
40
60
Temperature (℃)
80
100
120
0.00
140
0 ºC
100
20 ºC
tanδ
ESR (Ω)
40
Cap. Change (%)
Temperature - ESR
⊿Cap.
85 ºC
10
105 ºC
125 ºC
1
0.1
0.01
100
1k
Typical Cirve
- ZC-16 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2013
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1J100P
φ6.3×5.8 mm / 63 V / 10 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 63 V
10 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
(at W.V., After 2 min)
120 mΩ max. (at 100 kHz)
700 mArms max.
(at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
6.3 µA (0.01CV) max.
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D
Capacitance (μF)
Series Identification
0.08 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
5.8±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
100
|z|
ESR
|z|
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
1
1
0.1
10
10
C (μF)
ESL
ESL (nH)
|z| (Ω), ESR (Ω)
100
10
Cap.
10
1
tanδ
1000
Frequency - |z|, ESR, ESL
0.1
ESR
1
0.01
0.1
tanδ
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
50
Cap. Change (%)
Temperature - ESR
tanδ
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-60
-40
-20
0
20
40
60
80
100
120
-40 ºC
0.50
40
-50
-55 ºC
1000
⊿Cap.
0.00
140
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
85 ºC
10
105 ºC
125 ºC
1
0.1
0.01
100
Temperature (℃)
1k
Typical Cirve
- ZC-17 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1J220XP
φ6.3×7.7 mm / 63 V / 22 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 63 V
22 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
80 mΩ max. (at 100 kHz)
900 mArms max.
(at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
ZC
H
φD±0.5
⊖
(at 120 Hz)
13.8 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: D8
Capacitance (μF)
Series Identification
0.08 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
6.3
7.7±0.3
6.6
7.8 max.
2.6
0.65±0.10
1.8
0.35+0.15/-0.20
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
Cap.
Frequency - Cap., tanδ
1000 1000
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
|z| (Ω), ESR (Ω)
10
10
1
tanδ
|z|
ESL (nH)
100
0.1
1
ESR
0.01
0.001
100
1k
0.1
tanδ
0.01
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.50
40
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-60
-40
-20
0
20
40
60
Temperature (℃)
80
100
120
-55 ºC
Temperature - ESR
⊿Cap.
0.00
140
-40 ºC
1000
-25 ºC
0 ºC
100
20 ºC
85 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
10
105 ºC
125 ºC
1
0.1
0.01
100
1k
Typical Cirve
- ZC-18 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1J330P
φ8.0×10.2 mm / 63 V / 33 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 63 V
33 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
40 mΩ max. (at 100 kHz)
1100 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
20.7 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: F
Capacitance (μF)
Series Identification
0.08 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
8.0
10.2±0.3
8.3
10.0 max.
3.4
0.9±0.2
3.1
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
1000
|z|
Frequency - |z|, ESR, ESL
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
100
tanδ
ESL
100
100
ESL
1
1
0.1
10
Cap.
10
C (μF)
10
10
1
tanδ
|z|
ESL (nH)
|z| (Ω), ESR (Ω)
100
0.1
1
ESR
0.01
0.1
tanδ
0.01
0.001
100
1k
10 k
100 k
0.1
100
0.001
10 M
1M
1k
10 k
100 k
1M
0.01
10 M
Frequency (Hz)
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Osc. Level: 1.0 Vrms (at no load)
Cap. Change (%)
50
tanδ
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-40
-20
0
20
40
60
80
100
120
-40 ºC
-25 ºC
0.50
40
-60
-55 ºC
Temperature - ESR
1000
⊿Cap.
0.00
140
0 ºC
100
20 ºC
85 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
10
105 ºC
125 ºC
1
0.1
0.01
100
Temperature (℃)
1k
Typical Cirve
- ZC-19 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Technical Data
Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
V type ZC series
Part Number: EEHZC1J560P
φ10.0×10.2 mm / 63 V / 56 μF / 125 ℃, 4000 h
-55 to 125 ℃
DC 63 V
56 μF (at 120 Hz)
±20 %
A±0.2
0.3 max.
⊕
W
L
Lot Number
( ):
Rated Voltage Mark
30 mΩ max. (at 100 kHz)
1400 mArms max. (at 100 kHz, 125 ℃)
125 ℃, 4000 h
D
L
A, B
H
I
W
P
K
(P)
B±0.2
H
φD±0.5
ZC
⊖
(at 120 Hz)
35.2 µA (0.01CV) max. (at W.V., After 2 min)
(I)
Marking, Dimensions in mm (not to scale)
Size Code: G
Capacitance (μF)
Series Identification
0.08 max.
tanδ
DC Leakage Current
ESR
Ripple Current
Endurance
(I)
Rated W.V. Range
Nominal Capacitance Range
Capacitance Tolerance
K
Category Temperature Range
(mm)
10.0
10.2±0.3
10.3
12.0 max.
3.5
0.9±0.2
4.6
0.7±0.2
Reference Size
Frequency - |z|, ESR, ESL, Capacitance, tanδ Characteristics
Osc. Level: 0.5 Vrms (at no load)
|z|
ESR
1000
Cap.
Frequency - Cap., tanδ
1000
ESL
100
100
Cap.
100
ESL
10
10
1
1
0.1
C (μF)
10
ESL (nH)
|z| (Ω), ESR (Ω)
|z|
10
1
0.1
0.001
100
tanδ
1
ESR
0.01
0.1
0.01
1k
10 k
100 k
0.001
10 M
1M
0.1
100
1k
10 k
Frequency (Hz)
Osc. Level: 1.0 Vrms (at no load)
50
Temperature - ESR
tanδ
0.45
30
0.40
20
0.35
10
0.30
0
0.25
-10
0.20
-20
0.15
-30
0.10
-40
0.05
-50
-40
-20
0
20
40
60
80
100
120
0.00
140
0.01
10 M
-55 ºC
-40 ºC
0.50
40
-60
1M
1000
⊿Cap.
-25 ºC
0 ºC
100
20 ºC
tanδ
ESR (Ω)
Temperature - Cap., tanδ
100 k
Frequency (Hz)
Temperature - Capacitance, tanδ, ESR Characteristics
Cap. Change (%)
100
tanδ
tanδ
1000
Frequency - |z|, ESR, ESL
85 ºC
10
105 ºC
125 ºC
1
0.1
0.01
100
Temperature (℃)
1k
Typical Cirve
- ZC-20 -
10 k
100 k
1M
Frequency (Hz)
Jun. 2014
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
MEMO
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
MEMO
.
CAUTION AND WARNING
1. The electronic components contained in this catalog a re designed and produced for use in home electric appliances, office eq uipment, info rmation equipment,
communications equipment, and other general purpose electronic devices.
Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aeros pace equipment, disaster-prevention
equipment, security equipment, vehicles (automobile, train, vessel),
please be sure to contact our sales representative.
2. Wh en ap p lyin g o n e o f t h ese co m p o n en t s f o r eq u ip m en t req u irin g a h ig h d eg ree o f saf et y, n o m at t er w h at so r t o f ap p licat io n itm ig h t b e, b e su re t o in st all a p ro t ect ive
circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility.
3. Wh en u sin g o u r p ro d u ct s, n o m at t er w h at so r t o f eq u ip m en t t h ey m ig h t b e u sed f o r, b e su re t o m ake a w rit t en ag reem en t o n t h esp ecifi cat io n s w it h u s in ad van ce.
4. Technical info rmation contained in this catalog is intended to convey examples of typical pe rformances and/or applications a nd is not intended to make any
w arran t y w it h resp ect t o t h e in t ellect u al p ro p er t y rig h t s o r an y o t h er relat ed rig h t s o f o u r co m p an y o r an y t h ird p ar t ies n o r rgan t an y licen se u n d er su ch rig h t s.
5. In order to expo rt product s in thi s catalog, the expor ter may be subj ect to the export license requiremen t und er the Foreign Exchange and Foreign Trade Law of
Japan.
6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing p rocesses of Automotive & Ind ustrial Systems Company, Panasonic
Corporation.
Please contact
Factory
The information in this catalog is valid as of Jun. 2014.
Similar pages