ABE0000C61

Conductive Polymer Aluminum Electrolytic Capacitors
Surface Mount Type
Series :
GX (Super Low ESR Products)
Features
● Large
capacitance (560 μF max.)
Low ESR (3 mΩ max.)
● Low ESL ( 3-terminals : 50 % less than 2-terminals) [Suffix : L]
● High ripple current (10200 mAr.m.s. max.)
● RoHS compliance, Halogen free
● Super
Specifications
Series
Category temp. range
Rated voltage range
Nominal cap.range
Capacitance tolerance
DC leakage current
Dissipation factor (tan d)
Surge voltage (V.DC)
Endurance
Damp heat
(Steady state)
GX
–55 °C to +105 °C
2 V.DC to 2.5 V.DC
330 μF to 560 μF
±20 % (120 Hz/+20 °C)
I < 0.1 CV (μA) 2 minutes
< 0.06 (120 Hz/+20 °C)
Rated voltage × 1.25 (15 °C to 35 °C)
+105 °C, 2000 h, rated voltage applied
Capacitance change Within ±20 % of the initial value
tan d
< 2 times of the initial limit
DC leakage current
< 3 times of the initial limit
+60 °C, 90 %, 500 h, No-applied voltage
Capacitance change of 2 V.DC to 2.5 V.DC
initial measurd value
+70 %, –20 %
tan d
< 2 times of the initial limit
DC leakage current
Within the initial limit
Marking
Cap.
Polarity bar (Positive)
Lot No.
Rated voltage mark
d
2 V.DC
e
2.5 V.DC
R.V. code
Dimensions (not to scale)
2 terminals
3 terminals
+
+
–
H
H
–
P
P
L
L
W1
P4
W2
W2
+
W2
–
W2
W1
P1
P3
P2 P1
Unit : mm
Series
GX
L±0.2
7.3
W1±0.2 W2±0.1 H±0.1
4.3
2.4
1.9
✽ Externals of figure are the reference.
P±0.3
1.3
Unit : mm
Series L±0.2 W1±0.2 W2±0.1 H±0.1 P1±0.3 P2±0.1 P3±0.2 P4±0.2
GX
7.3
4.3
2.4
1.9
1.3
1.1
0.7
1.4
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Nov. 2015
Conductive Polymer Aluminum Electrolytic Capacitors
Characteristics list
Case size (mm)
Series
Rated Capacitance
(±20 %)
voltage
(V.DC)
(μF)
330
2
GX
470
560
2.5
470
Specification
✽1
L
7.3
7.3
7.3
7.3
7.3
7.3
7.3
W
4.3
4.3
4.3
4.3
4.3
4.3
4.3
H
1.9
1.9
1.9
1.9
1.9
1.9
1.9
✽2
Ripple
ESR
current
(mAr.m.s.) (mΩ max.)
10200
3
10200
3
10200
3
10200
3
10200
3
10200
3
10200
3
The number
of
terminals
2
Reflow ✽3
<Standard>
Part number
Min.✽4
Packaging
Q’ty
(pcs)
EEFGX0D331R
EEFGX0D471R
EEFGX0D471L
EEFGX0D561R
EEFGX0D561L
EEFGX0E471R
EEFGX0E471L
3500
3500
3500
3500
3500
3500
3500
3
○
○
○
○
○
○
○
✽1: Ripple current (100 kHz/ +45°C ), ✽2: ESR (100 kHz/+20 °C)
✽3: Please refer to the page of “Mounting Specifications”.
✽4: Please contact us when 500 pcs packing is necessary.
Temperature compensation multipliers for ripple current
Temp.
T < 45 °C
45 °C < T < 85 °C
85 °C < T < 105 °C
Coefficient
1.0
0.7
0.25
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05 Nov. 2015
Similar pages