Conductive Polymer Aluminum Electrolytic Capacitors Mounting Specifications ● Recommendable reflow soldering <Standard> Temperature on the surface of capacitor (°C) Soldering temperature and Soldering time Peak temperature 260 °C 10 s max. Temperature Time > 255 °C > 230 °C 130 s max. > 217 °C 150 s max. Soldering temperature 250 30 s max. 200 150 Soldering time 150 to 200 °C 180 s max. 100 Sp-Cap recommended profile condition of the IPC/J-STD-020D standard 50 Time (s) Reflow cycle : 3 max. EX.) Peak temperature 10 s max. Peak temperature Time in 230 °C or more 260 °C, 10 s max. 40 s max. 250 °C, 10 s max. 60 s max. 250 200 150 Time in 230 °C or more 150 to 200 °C 120 s max. 100 50 Time (s) 270 260 250 240 230 0 Reflow cycle : 2 max. ● Typical Peak temperature (°C) Temperature on the surface of capacitor (°C) <260 °C> 10 20 30 40 50 60 70 Time in 230 °C or more (s) land pattern For standard terminal (2-terminals) a c b Unit : mm Capacitor Series a b c Standard (Except MC) 8.8 4.0 2.8 (MC) 7.2 2.6 2.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Nov. 2015 Conductive Polymer Aluminum Electrolytic Capacitors ● Typical ● VIA land pattern For Low ESL terminal (3-terminals) (LR, LS, LT, LX, GX-L series) For Low ESL terminal (3-terminals) (LR, LS, LT, LX, GX-L series) Unit : mm Unit : mm VIA(+)10-00.4 8.8 4.0 2.7 VIA(–)10-00.4 – 1.3 0.5 – + – – 1.15 1.9 2.8 5.1 + Capacitor 0.9 0.9 Capacitor 0.9 0.9 0.9 0.5 0.3 0.3 Packaging Specifications ● Reel ● Embossed Dimensions Taping 0D0 (Feeding hole) P0 P2 Tape running direction b E t F – A W E 0C a 0A 0B a + 0D R:1.0 P1 b Chip pocket B b-b Cross section a-a Cross section Unit : mm W A B W F E P1 Standard (MC series) Standard (MC series) 7.6±0.2 6.3±0.3 4.5±0.2 3.6±0.3 12.0±0.3 5.5±0.1 1.75±0.10 8.0±0.1 t Unit : mm 0A 0B 0330 330 80 Reel 0C 0D E 13±0.5 21±0.8 2±0.5 W t 14 3 P2 P0 0D0 2.0±0.1 4.0±0.1 1.5+0.1 0 Upper row : Product height (mm) / Lower berth : t to 1.1 1.4 to 1.9 2.8 4.2 (MC series) 1.5±0.2 2.4±0.2 3.5±0.2 4.3±0.2 2.8±0.3 a Packaging Box Dimensions c Unit : mm Reel b 0330 a b c 400 max. 400 max. 135 max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Nov. 2015