SCHOTTKY BARRIER RECTIFIER SRF1620C THRU SRF16200C VOLTAGE RANGE 20 to 200 Volts CURRENT 16.0 Ampere FEATURES • • • • • • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MILS-19500/228 Low power loss,high efficiency Low forward voltage high current capability High surge capacity For use in low voltage, high frequency inverters. Free wheeling, and polarity protection applications ITO-220AB MECHANICAL DATA • • • • • Dimensions in inches and (millimeters) Case: ITO-220AB molded plastic Terminals: Lead solderable per MIL-STD-202 METHOD 208 Polarity: AS marked Mounting position: Any Weight: 0.08ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current At Tc=90℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) SYMBOLS SRF SRF SRF SRF SRF SRF SRF SRF SRF1 SRF1 SRF1 1620C 1630C 1635C 1640C 1645C 1650C 1660C 1680C 6100C 6150C 6200C UNIT VRRM VRMS VDC 20 14 20 30 21 30 35 25 35 40 28 40 45 32 45 50 35 50 60 42 60 80 56 80 100 70 100 150 105 150 200 140 200 Volts Volts Volts I(AV) 16.0 Amps IFSM 150 Amps Maximum Forward Voltage at 8.0A per element VF Maximum DC Reverse Current at rated DC Blocking Voltage per element IR TC = 25℃ TC = 100℃ Typical Junction Capacitance(Note2) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range 0.65 CJ RθJC TJ TSTG Notes: 1. Thermal Resistance Junction to Case 2. Measured at VR=4v and f=1MHz Web Site: www.hkmic.com 0.75 0.5 100 400 3.0 (-55 to +150) 0.85 Volts mA pF ℃/W ℃ SCHOTTKY BARRIER RECTIFIER SRF1620C THRU SRF16200C VOLTAGE RANGE 20 to 200 Volts CURRENT 16.0 Ampere RATING AND CHRACTERISTIC CURVES SRF1620C THRU SRF16200C FIG.1-TYPICAL FORWARD CURRENT FIG.3-TYPICAL INSTANTANEOUS DERATING CURVE 8.0 4.0 50 100 CASE TEMPERATRUE ( ℃) 150 20 10 8 6 4 AMPERES 12 0 20,30,40V INSTNTANCEOUS FORWARD CURRENT, AMPERES AVERAGE FORWARD CURRENT, 16 0 FORWARD CHARACTERSTIC 40 20 80-200V 2 50,60V 1.0 0.8 0.6 Tj =25℃ Pulse Width=200μs 0.4 0.2 0.1 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 INSTANTANEOUS FORWART VOLTAGE,VOLTS FIG.4-MAXIMUM NON-REPETITIVE SURGE CURRENT 150 FIG.2-TYPICAL REVERSE CHARACTERISTICS 130 8.3ms Single Half Sine-Wave JEDEC Method 100 10 90 70 50 30 20 TC=75℃ 0 1 5 2 10 20 100 50 NUMBER OF CYCLES AT 60 Hz 1.0 FIG.5-TYPICAL JUNCTION CAPACITANCE TC=25℃ 400 0.1 CAPACITANCE,pF INSTANTANEOUS REVERSE CURRENT, MILIAMPERES TC =100℃ CURRENT,AMPERES PEAK FORWARD SURGE 110 350 300 250 TJ =25℃ 200 0.01 0 100 120 200 300 150 REVERSE VOLTAGE VOLTS 1 2 5 10 20 50 100 REVERSE VOLTAGE,VOLTS Web Site: www.hkmic.com 200 500