Downloads for Switch Mode/High Frequency Differential Mode Toroidal Inductors (FIT106-5)

Switchmode/High Frequency
Toroidal Inductor
FIT106-5
Description:
The FIT106-5 toroidal inductor is specifically designed to minimize transients.
It stores energy and therefore, conditions the output signal by leveling the current
waveform providing a more stable current supply. Generally used in high frequency
circuits, its standard design provides an economical solution in differential mode
applications or as an output inductor.
Electrical Specifications (@25C):
Min. Inductance (µH)
Rated
Max
No Bias
At Bias
DC Amps
DCR (mΩ)
93.0
48.0
8.1
39.1
Note: No Bias inductance measured at .25V, 10KHZ.
C
F
G (DIA.)
Dimensions:
A
B
C
D
E
F
G
1.30
.725
1.40
.500
.724
.125
.040±.003
A
Units: In inches
B
Weight: .090 lbs.
E
Technical Notes:
1. Nominal inductance values are typically 10% higher than minimal rating.
2. Biased inductance measured at rated DC amps.
3. Operation at rated current yields approximately 40°C temperature rise
over 20°C ambient.
LEADS TINNED TO
MTG SURFACE MIN.
D
RoHS Compliance: As of manufacturing date February 2005, all standard products meet
the requirements of 2011/65/EU, known as the RoHS initiative.
* Upon printing, this document is considered “uncontrolled”. Please contact Triad
Magnetics’ website for the most current version.
Web: www.TriadMagnetics.com
Phone 951-277-0757
Fax 951-277-2757
460 Harley Knox Blvd.
Perris, California 92571
Publish Date: December 4, 2013
Similar pages