211D Datasheet

211D
www.vishay.com
Vishay
Type 211D Wet Tantalum Capacitor Array with Tantalum Cased
Tantalum Internal Components for - 55 °C to + 125 °C Operation
FEATURES
Vishay 211D series was designed as an upgrade to the older
and mature 200D and 202D Tantalpak® Capacitor
assemblies. The 211D is constructed using tantalum
capacitors, similar to the Vishay 135D series or the
MIL-PRF-39006/22 or /25 styles. This enables the 211D to
exhibit the improved performance characteristics of the
tantalum-cased capacitors. Capable of withstanding 3.0 V
reverse. The 211D has applicability in new designs when
used for energy storage, filtering and similar functions.
PERFORMANCE CHARACTERISTICS
Life Test: Capacitors shall withstand 2000 h at a
temperature of + 85 °C or + 125 °C at the rated DC working
voltage. Following the life test:
1. DCL shall not exceed the original requirement
2. ESR shall not exceed the original requirement
3. Capacitance shall not change more than ± 10 %
Operating Temperature: - 55 °C to + 125 °C
Capacitance Tolerance: At 120 Hz, + 25 °C, ± 20 %
Standard: ± 10 % available
DC Leakage Current (DCL maximum):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings table.
ORDERING INFORMATION
211D
228
X
030
A5
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE CODE
This is expressed in
picofarads. The first two
digits are significant
figures. The third is the
number of zeros.
X0 = ± 20 %
X9 = ± 10 %
This is expressed in volts.
To complete the three digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V).
See dimensional
configurations
DIMENSIONS
SERIES “A” CASE
1.305 ± 0.031
SERIES “B” CASE
1.593 ± 0.062
0.720 ± 0.031
1.000 ± 0.062
0.625 ± 0.015
0.750 ± 0.015
0.281 ± 0.031
0.281 ± 0.031
H ± 0.031
H ± 0.062
1.275 ± 0.015
Revision: 10-Nov-11
CASE CODE
H
CASE HEIGHT
A1
1.062 [26.97]
A2
1.375 [34.93]
A3
1.625 [41.28]
A4
2.000 [50.60]
A5
2.500 [63.50]
B1
1.500 [38.10]
B2
1.875 [47.63]
B3
2.250 [57.15]
B4
2.625 [66.68]
B5
3.000 [76.20]
B6
3.375 [85.73]
B7
3.750 [95.25]
Document Number: 40111
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
211D
www.vishay.com
Vishay
STANDARD RATINGS
MAXIMUM
ESR
AT + 25 °C
()
MAXIMUM
IMPEDANCE
AT - 55 °C
()
DCL
AT + 25 °C
(μA)
DCL
AT + 85 °C/
+ 125 °C
(μA)
MAXIMUM
RMS RIPPLE
40 kHz
(A)
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
4500
B1
211D458X010B1
0.150
3.8
24
96
11
7500
B3
211D758X010B3
0.090
2.3
40
160
19
10 000
B5
211D109X010B5
0.063
1.64
56
224
26
14 000
B7
211D149X010B7
0.049
1.28
72
288
34
7.8
10 VDC AT + 85 °C; 6.7 VDC AT + 125 °C
30 VDC AT + 85 °C; 20 VDC AT + 125 °C
1200
A2
211D128X030A2
0.31
3.9
21
63
1300
A4
211D138X030A4
0.42
6.0
18
96
5.8
1800
A5
211D188X030A5
0.45
6.3
32
128
4.8
1800
B1
211D188X930B1
0.23
4.2
48
192
9.4
50 VDC AT + 85 °C; 35 VDC AT + 125 °C
700
A4
211D707X050A4
0.23
8.2
24
144
5.8
1000
A5
211D108X050A5
0.51
7.3
27
108
4.6
3300
B5
211D338X050B5
0.150
2.2
90
360
15
5200
B6
211D528X050B6
0.096
1.38
144
576
24
5900
B7
211D598X050B7
0.085
1.22
162
648
27
75 VDC AT + 85 °C; 50 VDC AT + 125 °C
120
A2
211D127X075A2
0.99
20
6
36
3.0
200
A4
211D207X075A4
0.67
15.0
6
60
2.4
220
A5
211D227X075A5
0.49
10.0
12
72
6.0
400
A3
211D407X075A3
0.50
13.0
20
120
4.0
480
A4
211D487X075A4
0.41
10.5
24
144
4.8
660
A5
211D667X075A5
0.60
8.0
30
120
4.3
880
B2
211D887X075B2
0.180
3.6
72
288
12
1100
B3
211D118X075B3
0.150
2.9
90
360
15
4000
B7
211D408X075B7
0.100
1.33
180
720
26
15
100 VDC AT + 85 °C; 70 VDC AT + 125 °C
540
A5
211D547X0100A5
0.25
5.7
70
336
1200
B3
211D128X0100B3
0.28
3.0
120
480
16
1600
B7
211D168X0100B7
0.085
1.66
162
648
26
380
A5
211D387X0125A5
0.25
6.4
70
336
13
1100
B5
211D118X0125B5
0.20
2.3
168
672
21
1400
B7
211D148X0125B7
0.160
1.78
216
864
27
125 VDC AT + 85 °C; 80 VDC AT + 125 °C
150 VDC AT + 85 °C; 100 VDC AT + 125 °C
70
A2
211D706X0150A2
1.90
45
4
40
2.9
550
B3
211D118X0150B3
0.32
4.8
50
200
7
Note
• Other ratings are available. Contact factory with your specific requirements.
Revision: 10-Nov-11
Document Number: 40111
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000