ATB0000CE10

Detector Switches/ESE18
1HL Detector Switches
Type:
ESE18
■ Features
■ Recommended Applications
● Thin body: 1.2 mm
● Circuit type: Normally-open and normally-closed
● Detection of media in portable electronic equipment
(Mobile phones/CD-ROM/DVD players, Digital still cameras)
types are available.
● Travel:
Standard stroke type: 1.5 mm
Long stroke type: 2.15 mm
● Surface mounted type: Packed with embossed tape.
Supports reflow soldering.
■ Explanation of Part Numbers
1
2
3
4
5
E
S
E
1
8
6
8
9
Design No
Product Code
6th
L
R
7
Type
Left-side operation type
Right-side operation type
■ Specifications
Rating
50 µA 3 Vdc to 10 mA 5 Vdc (Resistive load)
Contact Resistance
500 m액 max. (Initial)
Insulation Resistance
100 M액 min. (100 Vdc)
Dielectric Withstanding Voltage
100 Vac for 1 minute
Operating Force
300 mN max.
Mounting Height
1.2 mm
Poles and Throws
Full Travel (Pushing distance)
1-pole 1-throw
· Standard stroke type
With boss
: 1.4 mm (1.5 mm)
Without boss : 2.1 mm (1.5 mm)
· Long stroke type
With boss
: 1.4 mm (2.15 mm)
Without boss : 2.1 mm (2.15 mm)
Operating Life
50000 cycles min.
Temperature Range
–10 °C to +60 °C
Heat Resistance
+70 °C for 96 hours
Low Temperature Resistance
–25 °C for 96 hours
Humidity Resistance
+40 °C 90 % to 95 % RH for 96 hours
Minimum Quantity/Packing Unit
5000 pcs. Embossed Taping (Reel Pack)
Quantity/Carton
30000 pcs.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES33 –
00 Oct. 2012
Detector Switches/ESE18
■ Dimensions in mm (not to scale)
.7°)
2.6 max.
5
0.6
n
dir
(52
ec
.4°
)
(14
R0.
3
0.25
1.15
3.0
3.8
(2)
1.2
Pivot center
Case center
Dummy terminal
0.25
0.25
0.4
Pivot center
1.8
3.6
0.5
2.7
4.0
PWB mounting hole for reference
(Pitch tolerance: ±0.05)
Standard stroke type
ESE18L Straight terminals
1-pole 1-throw
ON angular terminal
OFF angular terminal
.7˚)
(14
2.6 max.
65
0.
n
io
)
4˚
2.
R0.3
(5
5.4
3.2
0.54
0.25
1.15
Dummy terminal
3.0
4.1
Case center 1.2
0.7
0.5 0.5
0.75
(2.0)
1.4
1.0
0.5
0.7
(Pivot center)
0.25
0.4
Operation point
Normal closed
without Boss
ESE18L61C
ON start position
OFF start position
Pivot center
ON start position
OFF start position
3.4
2.0±0.1
Normal closed
with Boss
ESE18L61D
2.9
2.6
φ0.6±0.05
(1.2)
1.0
Full stroke position
Normal open
without Boss
ESE18L11C
Acti
on
dir
e
ct
Normal open
with Boss
ESE18L11D
0.54
0.75
0.7
0.7
0.5
3.4
2.0±0.1
ON start position
OFF start position
0.5
1.2±0.2
No. 2
5.4
3.2
ON start position
OFF start position
1.4
1.0
φ0.6±0.05
Act
ion
(1.2)
1.0
Normal closed
with Boss
ESE18L61B
tio
0.5
Operation point
Full stroke position
Normal open
without Boss
ESE18L11A
Normal closed
without Boss
ESE18L61A
0.25
ON angular terminal
OFF angular terminal
2.9
Normal open
with Boss
ESE18L11B
Standard stroke type
ESE18L J-bent terminals
1-pole 1-throw
2.6
No. 1
0.5
2.7
4.0
1.2±0.2
1.8
3.6
PWB mounting hole for reference
(Pitch tolerance: ±0.05)
.7°
(14
(3.2)
65
0.
R0
.3
(52
.4°
0.5
1.2±0.2
)
ON start position
OFF start position
5.4
3.2
0.54
1.15
0.5
2.7
4.0
3.0
3.8
Case center 1.2
0.7
0.5
0.75
(Pivot center) 0.7
1.4
1.0
0.25
Pivot center
Full stroke position
0.25
0.4
Operation point
φ0.6±0.05
0.25
3.4
2.0±0.1
Normal closed
with Boss
ESE18L62B
)
(1.2)
1.0
Normal open
without Boss
ESE18L12A
Normal closed
without Boss
ESE18L62A
0.5
OFF angular terminal
3.55
3.1
(2.0)
Normal open
with Boss
ESE18L12B
0.25
Long stroke type
ESE18L J-bent terminals
ON angular terminal
1-pole 1-throw
ON start position
OFF start position
No. 3
1.8
3.6
PWB mounting hole for reference
(Pitch tolerance: ±0.05)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES34 –
00 Oct. 2012
Detector Switches/ESE18
■ Dimensions in mm (not to scale)
No. 4
Long stroke type
ESE18L Straight terminals
Normal open 1-pole 1-throw
ON angular terminal
OFF angular terminal
with Boss
ESE18L12D
.3
(5
2.4
°)
5.4
3.2
R0
0.54
0.25
1.15
1.4
1.0
0.5
1.2±0.2
0.5
2.7
4.0
3.0
4.1
Case center 1.2
Full stroke position
0.25
0.4
ON start position
OFF start position
Pivot center
ON start position
OFF start position
Operation point
3.4
2.0±0.1
Normal closed
with Boss
ESE18L62D
3.55
3.1
(2.0)
φ0.6±0.05
(1.2)
1.0
0.75
(Pivot center) 0.7
0.7
0.5
Normal open
without Boss
ESE18L12C
Normal closed
without Boss
ESE18L62C
)
.7°
(3.2)
65
0.
(14
1.8
3.6
PWB mounting hole for reference
(Pitch tolerance: ±0.05)
Standard stroke type
ESE18R J-bent terminals
Normal open 1-pole 1-throw
No. 5
0.25
with Boss
ESE18R11B
0.5
ON angular terminal
OFF angular terminal
5.4
3.2
io
irect
0.25
1.15
3.0
3.8
Pivot center
0.75
0.7
0.7
0.5
3.4
2.0±0.1
1.2
1.0
2.6
(2)
1.4
2.9
n
φ0.6±0.05
nd
tio
Ac
Full stroke position 0.54
°)
Normal closed
with Boss
ESE18R61B
R0.3
Operation point
(1.2)
1.0
Normal closed
without Boss
ESE18R61A
(14
.7°
)
2.6 max.
0.6
5
ON start position
OFF start position
.4
(52
Normal open
without Boss
ESE18R11A
Case center
Pivot center
0.25
Dummy terminal
0.25
0.4
0.5
1.2±0.2
Standard stroke type
ESE18R Straight terminals
1-pole 1-throw
ON angular terminal
OFF angular terminal
(14
.7 ˚
0.25
1.15
1.4
1.0
0.5
Dummy terminal
0.5
2.7
4.0
3.0
0.75
0.7
(Pivot center)
0.7
0.5 0.5
Full stroke position
(2.0)
Operation point
2.9
2.6
ON start position
OFF start position
φ0.6±0.05
n
Pivot center
5.4
3.2
ti o
irec
3.4
2.0±0.1
nd
tio
Ac
˚)
0.25
0.4
0.54
4
2.
Normal closed
without Boss
ESE18R61C
(1.2)
1.0
)
(5
Normal closed
with Boss
ESE18R61D
ON start position
OFF start position
2.6 max.
0.
65
R0.3
Normal open
without Boss
ESE18R11C
4.1
Normal open
with Boss
ESE18R11D
PWB mounting hole for reference
(Pitch tolerance: ±0.05)
Case center 1.2
No. 6
1.8
3.6
0.5
2.7
4.0
1.8
3.6
1.2±0.2
PWB mounting hole for reference
(Pitch tolerance: ±0.05)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES35 –
00 Oct. 2012
Detector Switches/ESE18
■ Dimensions in mm (not to scale)
0.5
(14
.
Case center
Dummy terminal
0.5
2.7
4.0
0.5
1.2± 0.2
1.8
3.6
PWB mounting hole for reference
(Pitch tolerance: ±0.05)
Long stroke type
ESE18R Straight terminals
1-pole 1-throw
ON angular terminal
OFF angular terminal
(14
.
7°
ON start position
OFF start position
°)
Pivot center
0.25
1.15
1.2±0.2
Dummy terminal
0.5
2.7
4.0
3.0
4.1
0.5
0.75
0.7
0.7
0.5
(Pivot center)
3.4
2.0±0.1
0.25
0.4
0.5
Case center 1.2
φ0.6±0.05
.3
Normal closed
without Boss
ESE18R62C
0.54
5.4
3.2
.4
R0
1.0
Normal closed
with Boss
ESE18R62D
)
(3.2)
0.
65
(52
(1.2)
Normal open
without Boss
ESE18R12C
3.0
3.8
0.75
0.7
0.7
0.5
1.2
Pivot center
Pivot center
0.25
0.4
5.4
3.2
0.25
1.15
3.55
3.1
(2.0)
1.4
1.0
φ0.6±0.05
2.0±0.1
3.4
0.54
)
0.25
.4 °
Full stroke position
(3.2)
0.
65
(52
Operation point
R0
Normal closed
without Boss
ESE18R62A
7°
)
.3
(1.2)
1.0
Normal closed
with Boss
ESE18R62B
Normal open
with Boss
ESE18R12D
ON angular terminal
OFF angular terminal
ON start position
OFF start position
Normal open
without Boss
ESE18R12A
No. 8
0.25
3.55
3.1
(2.0)
1.4
1.0
Normal open
with Boss
ESE18R12B
Long stroke type
ESE18R J-bent terminals
1-pole 1-throw
ON start position
OFF start position
Operation point
Full stroke position
No. 7
1.8
3.6
PWB mounting hole for reference
(Pitch tolerance: ±0.05)
■ Circuit Diagram
Normal open type
1-pole 1-throw (N . O)
Type ESE18L
Type ESE18R
Dummy
Common
terminal
Dummy
Dummy
C
1
Dummy
1
Normal closed type
1-pole 1-throw (N . C)
Type ESE18L
C
Common
terminal
Type ESE18R
Dummy
Common
terminal
Dummy
Dummy
C
1
Dummy
1
C
Common
terminal
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES36 –
00 Oct. 2012
Detector Switches/ESE18
■ Packaging Specifications
Standard Reel Dimensions in mm (not to scale)
Standard stroke type
Long stroke type
Taping Reel
16.4
13.5
16.0±0.3
P=8.0±0.1
Drawing direction
4.0±0.1
TOP
2.0±0.1
Leading portion 400 mm min.
Pilot holes
.1
+0 0
.5
END
Carrier tape
φ1
7.5±0.1
1.75±0.1
φ380.0±2.0
Embossed Carrier Taping
Non-packed portion
(160 mm min.)
Packed portion
Non-packed portion
(100 mm min.)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES37 –
Cover tape
00 Oct. 2012
Similar pages