ATB0000CE13

Detector Switches/ESE31
2HL Detector Switches
Type:
ESE31
■ Features
■ Recommended Applications
● Increased the mounting strength Mounting strength: 80 N
● Decreased the profile of the switch body Height: 1.7 mm
● Increased the contact reliability and lifespan.
● Detection of media in portable electronic equipment
Lifespan: 100,000 operations or more
■ Explanation of Part Numbers
1
2
3
4
5
E
S
E
3
1
6
8
9
Design No
Product Code
6th
L
R
7
Type
Left-side operation type
Right-side operation type
■ Specifications
Rating
50 µA 3 Vdc to 10 mA 5 Vdc (Resistive load)
Contact Resistance
500 m액 max. (Initial)
Insulation Resistance
100 M액 min. (100 Vdc)
Dielectric Withstanding Voltage
100 Vac for 1 minute
Operating Force
390 mN max.
Mounting Height
1.7 mm
Poles and Throws
1-pole 1-throw
Full Travel
(Pushing distance)
3.2 mm (2.15 mm)
Operating Life
50000 cycles min.
Temperature Range
–10 °C to +70 °C
Heat Resistance
+85 °C for 96 hours
Low Temperature Resistance
–40 °C for 96 hours
Humidity Resistance
+60 °C 90 % to 95 % RH for 96 hours
Minimum Quantity/Packing Unit
2500 pcs. Embossed Taping (Reel Pack)
Quantity/Carton
15000 pcs.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES38 –
00 Oct. 2012
Detector Switches/ESE31
■ Dimensions in mm (not to scale)
No. 2
ESE31L11T
1-pole 1-throw
5.75
5.75
R3.8
2.8
Horizontal
direction
1.1
1 1.2
3.5
7.45
1.2 1
3.5
7.45
0.5±0.05
2.5
φ1.3
6.0
9.0
5.6
2.5
2.5
φ1.3
5.5
φ1.1+0.05
–0
1.6
1.2
2.5
9.0
5.6
2-φ1±0.05
1.6
1.2
2-φ1±0.05
5.5
.2
C0
φ1.1+0.05
–0
1.6
2-
2C
0.
2
5.9
0.5
1
5.9
0.5±0.05
1
1.6
6.0
0.5
1.7
1.5
1.1
4.35
5.4
(8.65)
3.2
Horizontal
ON position
measuring
position
Vertical direction
ON starting position
1.1
(8.65)
5.4
4.35
Horizontal
ON position
measuring
position
5.45±0.1
Horizontal
direction
(2.5)
0.6
(1) 1.21.05
1.45
2.5±0.1
2.3
5.2
R0.2
Vertical
direction
Measuring position 0.42
Horizontal ON position 0.26±0.25
0.14
Operation point
0.42 Measuring position
0.26±0.25 Horizontal ON position
Operation point
0.14
2.8
1.7 Vertical direction
1.5 ON starting position
1.1
R3.8
Vertical direction
1-pole 1-throw
ESE31R11T
3.2
5.45±0.1
5.2
2.3
2.5±0.1
1.45
(1) 1.2 1.05
0.6
(2.5)
No. 1
1.1+0.05
–0
1.1+0.05
–0
1.7
6.1
1.7
6.1
PWB mounting hole for reference
PWB mounting hole for reference
■ Circuit Diagram
1-pole 1-throw (N . O)
ESE31L11T
ESE31R11T
C Common terminal
Common terminal C
Common terminal C
Common terminal C
1
C Common terminal
1
C Common terminal
■ Packaging Specifications
Standard Reel Dimensions in mm (not to scale)
Taping Reel
16.4
END
P=12.0±0.1 Drawing direction
4.0±0.1
TOP
Pilot holes
2.0±0.1
Leading portion 400 mm min.
13.5
16.0±0.3
.1
+0 0
.5
Carrier tape
φ1
7.5±0.1
1.75±0.1
φ380.0±2.0
Embossed Carrier Taping
Non-packed portion
(160 mm min.)
Packed portion
Non-packed
portion
(100 mm min.)
Cover tape
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES39 –
00 Oct. 2012
Similar pages