Light Touch Switches/EVQPL/3PL/5PL/PT 4.9 mm Square SMD Light Touch Switches Type: EVQPL/EVQ3PL EVQ5PL/EVQPT ■ Features ■ Recommended Applications ● External dimensions : 4.9 mm×4.9 mm, Height: 0.8 mm(Without push plate), 1.5 mm(With push plate) ● Operation switches for portable electronic equipment (Notebook PC, Camcorders, Portable audio players, etc.) ● Operation switches for car audio systems ■ Explanation of Part Numbers 1 2 3 4 5 & 7 2 1 - Product Code 6 7 8 9 " Type Height ■ Product Chart Height H=0.8 mm H=1.5 mm (With Push Plate) Embossed Embossed Packaging Operating Force 1.0 N EVQPLB EVQPLD, EVQPT5 1.6 N EVQPLF EVQPLH, EVQPT9 2.6 N EVQPLK EVQPLM 3.5 N EVQ5PL EVQ3PL ■ Specifications Type Snap action/Push-on type SPST Rating 10 μA 2 Vdc to 20 mA 15 Vdc (Resistive load) Contact Resistance Electrical 50 mΩ max. Insulation Resistance 50 MΩ min. (at 100 Vdc) Dielectric Withstanding Voltage 250 Vac for 1 minute 3 ms max. (ON) 8 ms max. (OFF) Bouncing Operating Force Mechanical 1.0 N±0.5 N 1.6 N±0.5 N Travel Endurance Operating Life 2.6 N±0.6 N 3.5 N±1.0 N 0.25 mm +0.10 –0.20 mm 500000 cycles min. Operating Temperature 200000 cycles min. –20 °C to +70 °C –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) Storage Temperature Minimum Quantity/Packing Unit 5000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 25000 pcs. Note: Non washable Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2016 – ES73 – Light Touch Switches/EVQPL/3PL/5PL/PT ■ Dimensions in mm (not to scale) 0.45 0.05 A 0.3 B 2 f3. 0.2 4.9 4.6 EVQPLB EVQPLF EVQPLK EVQ5PL Be careful not to scratch the film (Embossed Taping) Surface mount For reflow soldering Without push plate A' B' 1.2 3.7 4.6 4.9 Operating part 2.5 5.0±0.5 No. 1 0.4 0.8 (5.5) (4.6) 4.3 3.1 (1) A B 3.4 5.4 GND A’ PWB land pattern for reference Height 0.8 mm 0.8 mm 0.8 mm 0.8 mm 4 B f2. Operating part Operating Life 500000 cycles 500000 cycles 200000 cycles 200000 cycles 0.45 0.05 (Embossed Taping) A’ B’ f4 .4 0.4 0.8 1.2 1.5 +– 0.2 0.1 (5.5) (4.6) 4.3 3.1 A (1) GND 1.2 3.7 4.6 4.9 B 3.4 5.4 Surface mount For reflow soldering With push plate 2.5 5±0.5 0.2 (3.4) (3.8) 0.3 A f2.2 f4 EVQPLD/PT5 EVQPLH/PT9 EVQPLM EVQ3PL Operating Force 1.0 N 1.6 N 2.6 N 3.5 N 4.9 4.6 Part Numbers EVQPLBA08 EVQPLFA08 EVQPLKA08 EVQ5PLA08 No. 2 B’ Circuit diagram A’ PWB land pattern for reference Part Numbers EVQPLDA15/PT5A15 EVQPLHA15/PT9A15 EVQPLMA15 EVQ3PLA15 Operating Force 1.0 N 1.6 N 2.6 N 3.5 N B’ Circuit diagram Height 1.5 mm 1.5 mm 1.5 mm 1.5 mm Operating Life 500000/2000000 cycles 500000/2000000 cycles 200000 cycles 200000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2016 – ES74 – Light Touch Switches/EVQPL/3PL/5PL/PT ■ Recommended Reflow Soldering Conditions ● Embossed Carrier Taping Fan or Normal Temp. 230 180 Tape width=12.0 mm t1 150 Feeding hole Chip pocket P2 P0 E fD0 F W A B Operation Top (°C) MAX. 260 (Normal Temp.) 90±30 40±10 t2 P1 Chip component Tape running direction Soldering Time (s) Unit: mm Part No. EVQPL EVQ3PL EVQ5PL EVQPT Height A B W 0.8/1.5 5.0±0.2 5.0±0.2 12.0±0.3 F E P1 5.5±0.1 1.75±0.10 8.0±0.1 P2 P0 D0 Dia. 2.0±0.1 4.0±0.1 1.5 –0 +0.1 t1 t2 0.35±0.1 1.0/1.7±0.2 ● Standard Reel Dimensions in mm (not to scale) T Item A B C Rate (mm) 0370.0±2.0 050.0 min. 013.0±0.5 E C D E 021.0±1.0 2.0±0.5 W T t r 14.0±1.5 — 1.0 to 3.0 1.0±0.5 B Item Rate (mm) D r A W ■ Recommended Shape of Test Pole t ■ Recommended Operating Conditions for Reflow soldering type 0.3 mm max. Test pole f1.0 Leaning angle range 90 °±4 ° (vertical direction) Switch Mounting surface R0.2±0.05 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2016 – ES75 –