Corrections of Datasheet MB90595/595G ds90595-ds07-13705-6e-corr-x1-02 © Fujitsu Microelectronics Europe GmbH Addendum, MB90595 Datasheet (DS07-13705-6E) This is the Addendum for the Datasheet DS07-13705-6E of the MB90595/595G microcontroller series. It describes all known discrepancies of the MB90595/595G microcontroller series datasheet. Ref. Number Date Version No. (Text Link) dd.mm.yy DS90595001 05.06.01 1.00 ds90595-ds07-13705-6e-corr-x1-02 Chapter/Page Description/Correction AC Table Clock timing : External Characteristics clock range added 1/2 DS90595001 AC Characteristics: Table 1 is incorrect, see correction below: (1) Clock Timing: Parameter Symbol Pin Min. Oscillation frequency Oscillation cycle time External clock frequency External clock cycle time Input clock pulse width Input clock rise and fall time Machine clock frequency Machine clock cycle Value Typ. Max. Units Remarks When using oscillation circuit When using oscillation circuit When using external clock When using external clock Duty ratio is about 30 to 70% When using external clock fc X0,X1 3 -- 5 MHz tCYL X0,X1 200 -- 333 ns fc X0,X1 3 -- 16 MHz tCYL X0,X1 62.5 -- 333 ns PWH,PWL X0 10 -- -- ns tCR,tCF X0 -- -- 5 ns fCP -- 1.5 -- 16 MHz tCP -- 62.5 -- 666 ns 2*tCP -ns When Flash is Flash Read tCYCL --accessed by CPU cycle time *: Frequency Deviation indicates the maximum Frequency difference from the target frequency when using a multiplied clock ds90595-ds07-13705-6e-corr-x1-02 2/2