LOW PROFILE SHRINK QUAD FLAT L-LEADED PACKAGE FUJITSU SEMICONDUCTOR DATA SHEET 80 PIN PLASTIC FPT-80P-M11 EIAJ code :∗QFP080-P-1414-1 80-pin plastic LQFP Lead pitch 0.65 mm Package width × package length 14 × 14 mm Lead shape Gullwing Sealing method Plastic mold (FPT-80P-M11) 80-pin plastic LQFP (FPT-80P-M11) +0.20 16.00±0.20(.630±.008)SQ 1.50 –0.10 +.008 14.00±0.10(.551±.004)SQ 60 .059 –.004 41 61 (Mounting height) 40 12.35 (.486) REF 15.00 (.591) NOM 1 PIN INDEX 80 LEAD No. 21 1 0.65(.0256)TYP 0.30±0.10 (.012±.004) 0.13(.005) 0.10(.004) C 1995 FUJITSU LIMITED F80016S-1C-3 Details of "A" part "A" 20 M 0.127 .005 0.10±0.10 (STAND OFF) (.004±.004) +0.05 –0.02 +.002 –.001 0 10° 0.50±0.20 (.020±.008) Dimensions in mm (inches). The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of the information or package dimensions in this document. 9711