SF11GRG THRU SF18GRG

SUPER FAST GLASS PASSIVATED RECTIFIER
SF11G/RG THRU SF18G/RG
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
1.0 Ampere
FEATURES
•
•
•
•
•
•
•
DO-41
R-1
Super fast switching speed
Glass passivated chip junction
Low power loss, high efficiency
Low leakage
High surge capacity
High temperature soldering guaranteed
260℃/10 second, 0.375″(9.5mm) lead length
SF11G Packing DO-41, SF11RG Packing R-1.
MECHANICAL DATA
•
•
•
•
•
•
Case: Transfer molded plastic
Epoxy: UL94V-0 rate flame retardant
Polarity: Color Band denotes cathode end
Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
Mounting position: Any
Weight: 0.012ounce, 0.33 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
•
•
Ratings at 25℃ ambient temperature unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load
For capacitive load derate current by 20%
SF
SF
SF
SF
SF
SF
SF
SF
SYMBOLS
UNIT
11G/RG 12G/RG 13G/RG 14G/RG 15G/RG 16G/RG 17G/RG 18G/RG
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
150
200
300
400
500
600
Volts
Maximum RMS Voltage
VRMS
35
70
105
140
210
280
350
420
Volts
Maximum DC Blocking Voltage
VDC
50
100
100
200
300
400
500
600
Volts
Maximum Average Forward Rectified Current
0.375″(9.5mm) lead length at T A=55℃
Peak Forward Surge Current
8.3ms single half sine-wave superimposed on
rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
Maximum DC Reverse Current at
rated DC Blocking Voltage at
TA = 25℃
TA = 125℃
Maximum Reverse Recovery Time
Test conditions lF=0.5A, lR=1.0A, lRR=0.25A
Typical Junction Capacitance
(Measured at 1.0MHz and applied reverse voltage of 4.0V)
Typical Thermal Resistance (NOTE 1)
Operating Junction Temperature Range
Storage Temperature Range
I(AV)
1.0
Amps
IFSM
30
Amps
VF
0.95
1.25
1.7
Volts
IR
5.0
50
µA
trr
35
nS
CJ
15
RθJC
TJ
TSTG
10
60
(-55 to +150)
(-55 to +150)
Notes:
1. Thermal resistance from junction to ambient with 0.375″(9.5mm) lead length, PCB mounted.
Web Site: www.hkmic.com
pF
℃/W
℃
℃
SUPER FAST GLASS PASSIVATED RECTIFIER
SF11G/RG THRU SF18G/RG
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
1.0 Ampere
RATING AND CHRACTERISTIC CURVES SF11G/RG THRU SF18G/RG
FIG.2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
PEAK FORWARD SURGE
1.2
0.8
0.6
0.4
Single Phase
Half Wave 60Hz
Resistive or
Inductive Load
0.375″(9.5mm) Lead Length
0.2
30
CURRENT, (A)
1.0
(A)
AVERAGE FORWARD CURRENT,
FIG.1-TYPICAL FORWARD CURRENT
DERATING CURVE
8.3ms Single Half Sine-Wave
(JEDEC Method) T= T jmax
20
10
1 Cycle
0
0
100
75
50 55
25
175
150
125
0
1
2
AMBIENT TEMPERATURE, (° C)
4
6G
-1
G
/R
G
15
SF
F1
7G
G
/R
G
TJ =25° C
0.1
40
20
60
100
Pulse Width=300us
1% Duty Cycle
0.01
100
TJ =125° C
10
(μA)
INSTANTANEOUS REVERSE CURRENT,
/R
G
G
/R
4G
-1
RG
G/
11
SF
(A)
INSTANTANEOUS FORWARD CURRENT,
S
/R
8
-1
10
CHARACTERISTICS
10
G
8
FIG.4-TYPICAL REVERSE
FIG.3-TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
1.0
6
NUMBER OF CYCLES AT 60 Hz
1.0
TJ =25° C
0.1
0
0.001
0.4
20
40
60
80
100
120
140
PERCENT OF RATED PEAK
0.6
0.8
1.0
1.2
1.6
1.4
1.8
REVERSE VOLTAGE,(%)
INSTANTANEOUS FORWARD VOLTAGE,(V)
FIG.5-TYPICAL JUNCTION CAPACITANCE
100
JUNCTION CAPACITANCE,(pF)
SF11G-SF14/G
F1G.6-TEST CIRCUIT DIAGRAM AND
REVERSE RECOVERY TIME CHARACTERISTIC
SF15G-SF18/G
Trr
50Ω
10Ω
NONINDUCTIVE NONINDUCTIVE
+0.5A
(-)
10
(+)
25 Vdc
(approx.)
(-)
T J =25° C
f=1MHz
Vsig=50mVp-p
1.0
1Ω
NON
INDUCTIVE
PULSE
GENERATIOR
(NOTE 2)
0
-0.25A
(+)
OSCILLOSCOPE
(NOTE 1)
-1.0A
1cm
1.0
0.1
D.U.T.
10
100
REVERSE VOLTAGE,(V)
NOTES : 1.Rise Time=7ns mas. Input Impedance=
1 magohm. 22pF
2.Rise time=10ns max. Source Impedance=
50 ohms
Web Site: www.hkmic.com
SET TIME BASE FOR
50/100ns/cm