DB 016030, DB 016040, DB 016060 Datasheet

DB 016030, DB 016040, DB 016060
www.vishay.com
Vishay Draloric
RF Power Feed-Through Capacitors
with Conductor Rod, Class 1 Ceramic
FEATURES
• Small size
• Geometry minimizes inductance
• Wide range of capacitance values
APPLICATIONS
Filtering purposes in industrial and medical RF power
equipment, where high voltages and high feed-through
currents are required.
CAPACITANCE RANGE
200 pF to 2.5 nF
CAPACITANCE TOLERANCE
± 20 %; ± 10 %; ± 5 %
CERAMIC DIELECTRICS
QUICK REFERENCE DATA
• R85 (TCC - 750 ppm/K)
DESCRIPTION
VALUE
Ceramic Class
1
Ceramic Dielectric
Type
R85
• R230 (TCC - 750 ppm/K)
R85, R230
RATED VOLTAGE
DB 016060
• 3.0 kVp
R85
DB 016030 DB 016040
Voltage (Vp)
3000
3000
3000
4000
Min. Capacitance (pF)
200
500
1000
800
Max. Capacitance (pF)
600
800
2500
800
Mounting
Screw terminal
• 4.0 kVp
DIELECTRIC STRENGTH TEST
200 % of rated AC voltage (50 Hz, 5 minutes)
MATERIAL
DISSIPATION FACTOR
Capacitor elements made from class 1 ceramic dielectric
with noble metal electrodes.
Max. 0.05 %
Connection terminals:
made from copper / brass, silver plated.
FINISH
Capacitor body completely protective lacquered.
MARKING
Type designator, capacitance value and tolerance, rated
peak voltage, ceramic material code, production date code,
manufacturer logo
Revision: 14-Sep-15
Measuring frequencies:
1 MHz (< 1 nF); 300 kHz or 100 kHz ( 1 nF)
INSULATION RESISTANCE
Min. 10 000 M (at 25 °C)
OPERATING TEMPERATURE RANGE
-55 °C to +100 °C
Document Number: 22115
1
For technical questions, contact: powcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DB 016030, DB 016040, DB 016060
www.vishay.com
Vishay Draloric
SAP PART NUMBER AND ELECTRICAL DATA
PART NUMBER
CAP.
VALUES
(pF)
CERAMIC
RATED
VOLTAGE
(kVP)
RATED
POWER (1)
(kvar)
RATED
CURRENT
(ARMS)
FEED-THROUGH
CURRENT (2)
(A)
3.0
4.0
5.0
10.0
3.0
5.0
5.0
10.0
7.5
5.0
10.0
TYPE DB 016030
DB016030BC201##BJ1
200
DB016030BC401##BJ1
R85
400
DB016030BC601##BJ1
600
TYPE DB 016040
DB016040BC501##BJ1
500
DB016040BC701##BJ1
R85
700
DB016040BC801##BJ1
800
TYPE DB 016060
DB016060BD801##BJ1
800
DB016060BC102##BJ1
1000
R85
DB016060BC122##BJ1
1200
DB016060BC152##BJ1
DB016060BC252##BK1
1500
R230
4.0
3.0
2500
Notes
• ## 14th to 15th digit: capacitance tolerance code ± 20 % = 38, ± 10 % = 36, ± 5 % = 33
(1) The surface temperature during operation must not exceed +100 °C
(2) DC or low frequency RMS current (< 20 kHz)
DIMENSIONS in millimeters (inches)
DB 016030: 30 (1.18)
DB 016040: 40 (1.57)
DB 016060: 60 (2.36)
10 ± 1
(0.39 ± 0.04)
Ø 26.0 ± 0.3
(1.024 ± 0.012 Dia.)
=
=
Ø 34.0 ± 0.3
(1.339 ± 0.012 Dia.)
Ø 16 (0.63 Dia.)
Ø 20 (0.79 Dia.)
M 4 Thread
0.5
(0.020)
Ø 4.2 + 0.2
(0.165 + 0.008 Dia.)
MOUNTING GUIDELINES
• The connection to one electrode must be flexible in order to prevent the generation of physical force which could damage the
capacitor elements. Such forces are often generated by the dimensional differences resulting from the normal physical
tolerances of these components.
• The capacitor elements must not be used as a mechanical support for other devices or components.
• Use two wrenches when tightening the nuts on both sides of the conductor rod.
The outer electrode terminal flange of these feed-through capacitors components should be fixed after tightening the inner
electrode’s connection.
• Make sure that not too much force applied to the solder connections between hardware and noble metal electrode. A torque
less than 3.5 Nm (31 lbf in) is recommended.
Revision: 14-Sep-15
Document Number: 22115
2
For technical questions, contact: powcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DB 016030, DB 016040, DB 016060
www.vishay.com
Vishay Draloric
DERATING DIAGRAMS
DB016030BC201##BJ1
0.71 MHz
Ug (kVp)
10
4.97 MHz
DB016030BC401##BJ1
Ig (ARMS)
Qg (kvar)
10
0.35 MHz
Ug (kVp)
10
Ug
2.48 MHz
Ig (ARMS)
Qg (kvar)
10
Ug
Qg
Qg
1
1
1
1
Ig
Ig
0.1
0.1
0.1
1
0.1
10
0.1
0.1
1
Frequency (MHz)
Frequency (MHz)
DB016030BC601##BJ1
0.24 MHz
Ug (kVp)
10
DB016040BC501##BJ1
Ig (ARMS)
Qg (kvar)
10
1.66 MHz
Qg
1
Ig (ARMS)
Qg (kvar)
10
Qg
1
Ig
1
Ig
0.1
0.1
0.1
1
0.1
10
0.1
0.1
1
10
Frequency (MHz)
Frequency (MHz)
DB016040BC701##BJ1
DB016040BC801##BJ1
0.22 MHz
Ig (ARMS)
Qg (kvar)
10
1.14 MHz
0.22 MHz
Ug (kVp)
10
Ug
Ug
Qg
Qg
1
Ig
0.1
0.1
0.1
1
1
Ig (ARMS)
Qg (kvar)
10
0.99 MHz
1
Ig
0.1
10
0.1
0.1
1
10
Frequency (MHz)
Frequency (MHz)
DB016060BD801##BJ1
DB016060BC102##BJ1
0.19 MHz
Ug (kVp)
10
1.59 MHz
Ug
1
1
0.35 MHz
Ug (kVp)
10
Ug
Ug (kVp)
10
10
0.66 MHz
Ig (ARMS)
Qg (kvar)
10
0.27 MHz
Ug (kVp)
10
0.53 MHz
Ig (ARMS)
Qg (kvar)
10
Qg
Ug
Ug
Qg
Ig
Ig
1
1
0.1
1
Frequency (MHz)
Revision: 14-Sep-15
1
1
0.1
1
Frequency (MHz)
Document Number: 22115
3
For technical questions, contact: powcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DB 016030, DB 016040, DB 016060
www.vishay.com
Vishay Draloric
DERATING DIAGRAMS
DB016060BC122##BJ1
0.22 MHz
Ug (kVp)
10
DB016060BC152##BJ1
Ig (ARMS)
Qg (kvar)
10
0.44 MHz
0.18 MHz
Ug (kVp)
10
Ug
0.35 MHz
Ig (ARMS)
Qg (kvar)
10
Qg
Ug
Qg
Ig
Ig
1
1
0.1
1
1
1
0.1
1
Frequency (MHz)
Frequency (MHz)
DB016060BC252##BK1
0.18 MHz
Ug (kVp)
10
0.35 MHz
Ig (ARMS)
Qg (kvar)
10
Ug
Qg
1
1
Ig
0.1
0.01
0.1
0.1
1
Frequency (MHz)
RELATED DOCUMENTS
General Information
Revision: 14-Sep-15
www.vishay.com/doc?22071
Document Number: 22115
4
For technical questions, contact: powcap@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000