Data Sheet

DISCRETE SEMICONDUCTORS
DATA SHEET
handbook, halfpage
M3D087
BSP60; BSP61; BSP62
PNP Darlington transistors
Product data sheet
Supersedes data of 1999 Apr 29
2001 May 31
NXP Semiconductors
Product data sheet
PNP Darlington transistors
BSP60; BSP61; BSP62
FEATURES
PINNING
• High current (max. 0.5 A)
PIN
• Low voltage (max. 80 V)
1
• Integrated diode and resistor.
DESCRIPTION
base
2, 4
3
collector
emitter
APPLICATIONS
• Industrial switching applications such as:
4
– Print hammer
2, 4
– Solenoid
1
– Relay and lamp drivers.
DESCRIPTION
1
PNP Darlington transistor in a SOT223 plastic package.
NPN complements: BSP50, BSP51 and BSP52.
2
Top view
3
3
MAM266
Fig.1 Simplified outline (SOT223) and symbol.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
SYMBOL
VCBO
VCES
PARAMETER
collector-base voltage
CONDITIONS
MIN.
MAX.
UNIT
open emitter
BSP60
−
−60
V
BSP61
−
−80
V
BSP62
−
−90
V
BSP60
−
−45
V
BSP61
−
−60
V
−
−80
V
−
−5
V
collector-emitter voltage
VBE = 0
BSP62
VEBO
emitter-base voltage
open collector
IC
collector current (DC)
−
−1
A
ICM
peak collector current
−
−2
A
IB
base current (DC)
−
−100
mA
Ptot
total power dissipation
−
1.25
W
Tstg
storage temperature
−65
+150
°C
Tj
junction temperature
−
150
°C
Tamb
operating ambient temperature
−65
+150
°C
Tamb ≤ 25 °C; note 1
Note
1. Device mounted on a printed-circuit board, single sided copper, tinplated, mounting pad for collector 1 cm2.
For other mounting conditions, see “Thermal considerations for the SOT223 in the General Part of associated
Handbook”.
2001 May 31
2
NXP Semiconductors
Product data sheet
PNP Darlington transistors
BSP60; BSP61; BSP62
THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
CONDITIONS
Rth j-a
thermal resistance from junction to ambient
Rth j-s
thermal resistance from junction to solder point
VALUE
UNIT
98
K/W
17
K/W
note 1
Note
1. Device mounted on a printed-circuit board, single sided copper, tinplated, mounting pad for collector 1 cm2.
For other mounting conditions, see “Thermal considerations for the SOT223 in the General Part of associated
Handbook”.
CHARACTERISTICS
Tj = 25 °C unless otherwise specified.
SYMBOL
ICES
PARAMETER
CONDITIONS
TYP.
MAX.
UNIT
collector cut-off current
BSP60
VBE = 0; VCE = −45 V
−
−
−50
nA
BSP61
VBE = 0; VCE = −60 V
−
−
−50
nA
BSP62
VBE = 0; VCE = −80 V
−
−
−50
nA
−
−
−50
nA
IC = −150 mA
1 000
−
−
IC = −500 mA
2 000
−
−
IC = −500 mA; IB = −0.5 mA
−
−
−1.3
V
IC = −500 mA; IB = −0.5 mA;
Tj = 150 °C
−
−
−1.3
V
IEBO
emitter cut-off current
IC = 0; VEB = −4 V
hFE
DC current gain
VCE = −10 V; note 1; see Fig.2
VCEsat
MIN.
collector-emitter saturation
voltage
VBEsat
base-emitter saturation voltage
IC = −500 mA; IB = −0.5 mA
−
−
−1.9
V
fT
transition frequency
IC = −500 mA; VCE = −5 V;
f = 100 MHz
−
200
−
MHz
−
400
−
ns
−
1 500
−
ns
Switching times (between 10% and 90% levels); see Fig.3
ton
turn-on time
toff
turn-off time
ICon = −500 mA; IBon = −0.5 mA;
IBoff = 0.5 mA
Note
1. Pulse test: tp ≤ 300 μs; δ ≤ 0.02.
2001 May 31
3
NXP Semiconductors
Product data sheet
PNP Darlington transistors
BSP60; BSP61; BSP62
MGD839
6000
handbook, full pagewidth
hFE
5000
4000
3000
2000
1000
0
−10−1
−1
−10
−102
VCE = −10 V.
Fig.2 DC current gain; typical values.
VBB
handbook, full pagewidth
RB
VCC
RC
Vo
(probe)
oscilloscope
450 Ω
(probe)
450 Ω
R2
Vi
DUT
R1
MGD624
Vi = −10 V; T = 200 μs; tp = 6 μs; tr = tf ≤ 3 ns.
R1 = 56 Ω; R2 = 10 kΩ; RB = 10 kΩ; RC = 18 Ω.
VBB = 1.8 V; VCC = −10.7 V.
Oscilloscope: input impedance Zi = 50 Ω.
Fig.3 Test circuit for switching times.
2001 May 31
4
oscilloscope
IC (mA)
−103
NXP Semiconductors
Product data sheet
PNP Darlington transistors
BSP60; BSP61; BSP62
PACKAGE OUTLINE
Plastic surface mounted package; collector pad for good heat transfer; 4 leads
D
SOT223
E
B
A
X
c
y
HE
v M A
b1
4
Q
A
A1
1
2
3
Lp
bp
e1
w M B
detail X
e
0
2
4 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
bp
b1
c
D
E
e
e1
HE
Lp
Q
v
w
y
mm
1.8
1.5
0.10
0.01
0.80
0.60
3.1
2.9
0.32
0.22
6.7
6.3
3.7
3.3
4.6
2.3
7.3
6.7
1.1
0.7
0.95
0.85
0.2
0.1
0.1
OUTLINE
VERSION
SOT223
2001 May 31
REFERENCES
IEC
JEDEC
EIAJ
SC-73
5
EUROPEAN
PROJECTION
ISSUE DATE
97-02-28
99-09-13
NXP Semiconductors
Product data sheet
PNP Darlington transistors
BSP60; BSP61; BSP62
DATA SHEET STATUS
DOCUMENT
STATUS(1)
PRODUCT
STATUS(2)
DEFINITION
Objective data sheet
Development
This document contains data from the objective specification for product
development.
Preliminary data sheet
Qualification
This document contains data from the preliminary specification.
Product data sheet
Production
This document contains the product specification.
Notes
1. Please consult the most recently issued document before initiating or completing a design.
2. The product status of device(s) described in this document may have changed since this document was published
and may differ in case of multiple devices. The latest product status information is available on the Internet at
URL http://www.nxp.com.
DISCLAIMERS
above those given in the Characteristics sections of this
document is not implied. Exposure to limiting values for
extended periods may affect device reliability.
General ⎯ Information in this document is believed to be
accurate and reliable. However, NXP Semiconductors
does not give any representations or warranties,
expressed or implied, as to the accuracy or completeness
of such information and shall have no liability for the
consequences of use of such information.
Terms and conditions of sale ⎯ NXP Semiconductors
products are sold subject to the general terms and
conditions of commercial sale, as published at
http://www.nxp.com/profile/terms, including those
pertaining to warranty, intellectual property rights
infringement and limitation of liability, unless explicitly
otherwise agreed to in writing by NXP Semiconductors. In
case of any inconsistency or conflict between information
in this document and such terms and conditions, the latter
will prevail.
Right to make changes ⎯ NXP Semiconductors
reserves the right to make changes to information
published in this document, including without limitation
specifications and product descriptions, at any time and
without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
No offer to sell or license ⎯ Nothing in this document
may be interpreted or construed as an offer to sell products
that is open for acceptance or the grant, conveyance or
implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Suitability for use ⎯ NXP Semiconductors products are
not designed, authorized or warranted to be suitable for
use in medical, military, aircraft, space or life support
equipment, nor in applications where failure or malfunction
of an NXP Semiconductors product can reasonably be
expected to result in personal injury, death or severe
property or environmental damage. NXP Semiconductors
accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at
the customer’s own risk.
Export control ⎯ This document as well as the item(s)
described herein may be subject to export control
regulations. Export might require a prior authorization from
national authorities.
Quick reference data ⎯ The Quick reference data is an
extract of the product data given in the Limiting values and
Characteristics sections of this document, and as such is
not complete, exhaustive or legally binding.
Applications ⎯ Applications that are described herein for
any of these products are for illustrative purposes only.
NXP Semiconductors makes no representation or
warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values ⎯ Stress above one or more limiting
values (as defined in the Absolute Maximum Ratings
System of IEC 60134) may cause permanent damage to
the device. Limiting values are stress ratings only and
operation of the device at these or any other conditions
2001 May 31
6
NXP Semiconductors
Customer notification
This data sheet was changed to reflect the new company name NXP Semiconductors. No changes were
made to the content, except for the legal definitions and disclaimers.
Contact information
For additional information please visit: http://www.nxp.com
For sales offices addresses send e-mail to: [email protected]
© NXP B.V. 2009
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
613514/05/pp7
Date of release: 2001 May 31
Document order number: 9397 750 07906