Aries Eleectronics PLCC-to-DIP Adapter – RoHS/WEEE-Compliant PDF

Series 652000 and 653000 RoHs/WEEE-Compliant
PLCC-to-DIP Adapter
FEATURES
• Converts PLCC packaged ICs-to-DIP footprints.
• Ideal for prototyping and testing/evaluation.
• Available with PLCC Sockets or PLCC Pads on top side.
• Consult factory for Panelized Form or for mounting of consigned ICs.
GENERAL SPECIFICATIONS
• ADAPTER BODY: 0.062 [1.58] FR-4 or IS410 per IPC 4101A/26 with 1-oz. Cu
traces, both sides finished with ENIG (Immersion Au over Electroless Ni)
• PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
• PIN PLATING: 10µ [0.254µ] min. Au per MIL-G-45204 over 100µ [2.54µ] Ni per
SAE AMS-QQ-N-290
• OPTIONAL PLCC SURFACE MOUNT SOCKETS: UL 94V-0 PPS
• SOCKET CONTACTS: Phophros Bronze, Pb-plated (RoHS-compliant)
• CURRENT RATING: 1 amp
• OPERATING TEMPERATURE: 221°F [105°C]
MOUNTING CONSIDERATIONS
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ORDERING INFORMATION
XX-65X000-11-RC
• SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia.
• Will plug into standard IC socket
• See Table for Pad Layout when mounting PLCC socket
No. of Pins
28, 32, 44, 68, 84
Series
652000: without socket
653000: with socket
ALL DIMENSIONS: INCHES [MILLIMETERS]
Au Solder Pin Tail
RoHS-compliant
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Pins
Dim. “A”
Dim. “B”
Dim. “C”
Dim. “D”
28
32
44
68
84
1.400 [35.56]
1.600 [40.64]
2.200 [55.88]
3.400 [86.36]
4.200 [106.68]
1.300 [33.02]
1.500 [38.10]
2.100 [53.34]
3.300 [88.32]
4.100 [104.14]
0.705 [17.91]
0.705 [17.91]
0.910 [23.11]
1.220 [30.99]
1.420 [36.07]
0.703 [17.86]
0.805 [20.45]
0.910 [23.11]
1.220 [30.99]
1.421 [36.09]
Dim. “W”
±0.003 [0.08]
non-cumulative
0.300 [7.62]
0.400 [10.16]
0.500 [12.70]
0.800 [20.32]
1.000 [24.40]
Dim. “X”
±0.003 [0.08]
non-cumulative
0.300 [7.62]
0.300 [7.62]
0.500 [12.70]
0.800 [20.32]
1.147 [29.13]
Dim “Y”
±0.003 [0.08]
Dim. “Z”
±0.003 [0.08]
Pad
Size
0.449 [11.41]
0.549 [13.95]
0.670 [17.02]
0.945 [24.00]
1.147 [29.13]
0.449 [11.41]
0.448 [11.39]
0.670 [17.02]
0.945 [24.00]
1.147 [29.13]
0.024 x 0.076 [0.61 x 1.93]
0.024 x 0.076 [0.61 x 1.93]
0.026 x 0.076 [0.66 x 1.93]
0.026 x 0.076 [0.66 x 1.93]
0.026 x 0.080 [0.66 x 2.03]
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
WWW.ARIESELEC.COM • [email protected]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18014RC
Rev. AB
Similar pages