Aries Electronics CSP/µBGA Test & Burn-in Socket w/Adjustable Pressure Pad for Devices up to 27mm Square PDF

CSP/µBGA Test & Burn-in Socket w/Adjustable
Pressure Pad for Devices up to 27mm Square
FEATURES
• Aries unique universal socketing system allows the socket to be easily configured for any package,
on any pitch (or multiple pitch) from 0.2mm or greater, in any configuration, with little or no tooling
charge or extra lead-time.
• For Test & Burn-In of CSP, µBGA, Bump-Array, QFN, QFP, MLF, DFN, SSOP, TSSOP, TSOP, SOP, SOIC,
LGA, LCC, PLCC, TO and any SMT package style made. Also can be compatible with PGA packaged
devices.
• Quick and easy Probe Replacement System: the complete set of probes can be removed and a new
set (interposer) can be inserted quickly and easily. The old set can be returned to the factory for repair
and sent back within one day.
• Pressure mounting, no soldering required.
• 4-point crown (other styles also available) insures scrub on solder oxides.
• Signal path during test only 0.077 [1.96].
• Accommodates any package up to 27mm square.
ORDERING INFORMATION
• Small overall socket size/profile allows max. number of sockets per BIB and BIB’s per oven,
Consult Factory
while being operator friendly.
• Adjustable pressure pad, with a large tolerance, allows for varying device heights as
CLEANING, HANDLING, MOUNTING
well as for fine-tuning pressure pad force to meet specific device requirements.
& PROBE REPLACEMENT INFO
GENERAL SPECIFICATIONS
Need a Breakout Board?
• MOLDED SOCKET COMPONENTS: UL 94V-0 PEEK and/or Ultem
SPECIAL THERMAL REQUIREMENT WORKSHEET
•1dB BANDWIDTH: 1GHz (0.80mm pitch) (large probe)
•
ESTIMATED CONTACT LIFE: 500,000 cycles
•
COMPRESSION SPRING PROBES: heat-treated BeCu with 30µ [0.75µ] min. Au per MIL-G-45204 over 30µ [0.75µ] min. Ni per SAE AMS
QQ-N-290
•
CONTACT FORCE : 6g per contact on 0.20-0.29mm pitch
A detailed device drawing must be
: 15g per contact on 0.30-0.35mm pitch
sent to Aries to quote and design
: 16g per contact on 0.40-0.45mm pitch
a socket.
: 25g per contact on 0.50-0.75mm pitch
__________________________
: 25g per contact on 0.80mm pitch or larger
See Data Sheet for...
•
OPERATING TEMPERATURE: -55°C [-67°F] min. to 150°C [302°F] max.
CSP Sockets
•
ALL HARDWARE: Stainless Steel
•
TYPICAL BURN-IN TEMPERATURE: 150°C [302°F] max.
23016 Hybrid Socket
23021 µBGA up to 6.5mm
MOUNTING CONSIDERATIONS
23017 µBGA up to 13mm
• SOCKET: mounted with four #4-40 screws to either a plastic shipping plate (to be removed at time of
23018 µBGA up to 27mm
socket mounting or PCB) or a tapped insulated backing plate to be used on underside of PCB for high
pin count applications
23019 µBGA up to 40mm
• NOTE: Sockets must be handled with care when mounting or removing sockets to/from PCB
23020 µBGA up to 55mm
•
TEST PCB MINIMUM DIAMETER “G” : 0.025 [0.64] (large probe 0.80mm pitch and larger)
23023 Optical Failure Analysis
: 0.015 [0.38] (small probe 0.50-0.75mm pitch)
: 0.012 [0.31] (small probe 0.40-0.45mm pitch)
RF Sockets
: 0.009 [0.23] (small probe 0.30-0.35mm pitch)
24013 RF up to 6.5mm
: 0.004 [0.10] (small probe 0.20-0.20mm pitch)
•
TEST PCB DIAMETER SPRING PROBE PAD PLATING: 30µ [0.75µ] min. Au per MIL-G-45204 over 30µ
24008 RF up to 13mm
[0.75µ] min. Ni per SEA AMS-QQ-N-290. Pad must be the same height as top surface of PCB. Please
24009 RF up to 27mm
refer to the Custom Socket Drawing supplied by Aries after receipt of your order for your specific ap24009-APP w/Adj Pressure Pad
plication.
24011 RF up to 40mm
24012 RF up to 55mm
24010 RF Machined Socket
23022 Kelvin Test Socket
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
WWW.ARIESELEC.COM • [email protected]
23018-APP
1 of 2
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
Rev. 1.6
CSP/µBGA Test & Burn-in Socket w/Adjustable
Pressure Pad for Devices up to 27mm Square
FULL-ARRAY SHOWN AS AN EXAMPLE; YOUR SPECIFIC DEVICE
PATTERN/FOOTPRINT WILL BE SUPPLIED WHEN ORDERED.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13]
UNLESS OTHERWISE SPECIFIED
CUSTOMIZATION: In addition to the
standard products shown on this
page, Aries specializes in custom
design and production. Special materials, platings, sizes, and configurations can be furnished, depending on
the quantity. NOTE: Aries reserves
the right to change product general
specifications without notice.
SPRING PROBES
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
WWW.ARIESELEC.COM • [email protected]
23018-APP
2 of 2
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
Rev. 1.6
Similar pages