Aries Electronics RF Test Sockets w/Replaceable Contact Strips PDF

RF Test Socket
w/Replaceable Contact Strips
FEATURES
•User replaceable patented Microstrip™ contacts which lie flat on the DUT board,
and become part of the transmission line decreasing down-time.
•Same high-frequency performance of our standard Microstrip™ contacts.
•Available in Pb pitches from 0.4mm to 5.0mm.
•Easy to use removal and insertion tool shipped with every order.
•Replaceable contact strips available in just 1 week.
•Socket alignment pins provide accurate socket location to test board.
•Frequency response data available up to 19GHz.
GENERAL SPECIFICATIONS
•SOCKET BODY MATERIAL: either PEEK or Torlon® PAI
•HARDWARE: Stainless Steel
•CONTACT RESISTANCE: <70 mΩ
•CONTACT INDUCTANCE: 0.01nH
•CURRENT RATING: 4A (max.)
•ESTIMATED CONTACT LIFE: 500,000 cycles
•CONTACT FORCE: Consult Factory
•INSERTION LOSS: <1dB to 16.7GHz (at 0.50mm pitch).
MOUNTING CONSIDERATIONS
•SUGGESTED MOUNTING HOLE SIZE: 0.120 [3.05] 4 places for #4-40 Screws
•SUGGESTED LOCATING PIN HOLE SIZE: 0.063 [1.6] 4 places
•SUGGESTED TEST BOARD PLATING: 30µ min. hard Au over 50µ min. Ni
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ORDERING INFORMATION
Consult Facotry for P/N
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
WWW.ARIESELEC.COM • [email protected]
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
24001
Rev. 1.2
Similar pages