Aries Electronics Series 8XXX Collet Elevator Sockets on 0.300 [7.62] and 0.600 [15.24] Centers PDF

Series 8 Elevator Socket
w/Collet Contacts & Solder Pin Tails
FEATURES
• Ideal for Elevating Devices (Displays, Switches, etc.) to Desired Level with 0.240 to 1.250 [6.10 to 31.75] Height
Extension
GENERAL SPECIFICATIONS
• STANDARD SOCKET BODY & SPACER: black UL 94V-0 glass-filled 4/6 Nylon
• PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM B16/B16M-05
• PIN BODY PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 –OR– 200µ [5.08] min. 93/7 Sn/Pb per ASTM B545
–OR– 200µ [5.08µ] min. Sn per ASTM B545 Type 1 over 100µ [2.54µ] min. Ni per SAE AMS-QQ-N-290B
• 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM B194-08
• CONTACT PLATING: 30µ [0.76µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N-290B
• CONTACT CURRENT RATING: 3 amps
ORDERING INFORMATION
• OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C]
XX-8
XXXX-X
10 C XX
• INSERTION FORCE: 180g/pin, based on 0.018 [0.46] dia. test lead
• WITHDRAWAL FORCE: 90g/pin, based on 0.018 [0.46] dia. test lead
Optional Solder Pin Tail Plating
• NORMAL FORCE: 140g/pin, based on 0.018 [0.46] dia. test lead
TL = Sn/Pb
• ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] dia., 0.110-0.150 [2.79-3.81]
Collet Style
long
Sn-plated Solder Pin Tail
Row-to-Row Spacing
3 “Y” = 0.300 [7.62]
6 “Y” = 0.600 [15.24]
Seating Plane Height
0.240 [6.10] to 1.250 [31.75]
Example: 0.240 height = “8240”
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE: 0.035 ±0.002 [0.89 ±0.05] dia.
1.250 height = “81250”
Series
No. of Pins
(See Table)
Centers “Y”
Body Style Available Sizes
C
6 thru 20
0.300 [7.62] 0.400 [10.16]
B
22 thru 40
C
6 thru 40
0.600 [15.24] 0.700 [17.78]
B
42 thru 48
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
FOR COLLET CONTACTS ON 0.200 [5.08] CENTERS, SEE DATA SHEET 13007
FOR BIFURCATED CONTACTS, SEE DATA SHEET 13006
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Dim. “Z”
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL 215-781-9956 • FAX 215-781-9845
WWW.ARIESELEC.COM • [email protected]
13008
Rev. 1.3
1 of 1
Similar pages