561R, 562R, 565R Series Datasheet

561R, 562R, 565R Series
www.vishay.com
Vishay Cera-Mite
Lower Voltage Ceramic DC Disc Capacitors
1000 VDC General Purpose
FEATURES
• Low losses
• High stability
• High capacitance in small size
• Complete range of capacitance values
• Radial leads
• Ceramic singlelayer capacitor
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Bypassing
• Resonant circuit
QUICK REFERENCE DATA
DESCRIPTION
Ceramic Class
Ceramic Dielectric
• Coupling
VALUE
1
DESIGN
2
C0G U2J X5F X7R
Voltage (VDC)
Y5U
Z5U
1200
1000
Min. Capacitance (pF)
10
33
100 1000 1000
Max. Capacitance (pF)
10
33
500 1000 1000 100 000
Mounting
Radial
INSULATION RESISTANCE
Min. 1000 F or 20 000 M
The capacitors consist of a ceramic disc of which both sides
are silver-plated. Connection leads are made of tinned
copper or tinned copper clad steel having diameters of
0.020" (0.51 mm) or 0.025" (0.64 mm).
The capacitors may be supplied with radial kinked or
straight leads having lead spacing of 0.250" (6.35 mm) or
0.375" (9.5 mm).
The standard tolerance is ± 20 %.
TOLERANCE ON CAPACITANCE
Coating is made of resin coating or flammable resistant
epoxy resin in accordance with “UL 94 V-0”.
± 20 %
CAPACITANCE RANGE
DISSIPATION FACTOR
10 pF to 0.1 μF
2.5 % max. at 1 kHz; 1 V
RATED VOLTAGE
CATEGORY TEMPERATURE RANGE
1000 VDC
(-55 to +125) °C
C0G, U2J, X7R
DIELECTRIC STRENGTH BETWEEN LEADS
(-25 to +85) °C
X5F, Y5U, Z5U
Component test:
CLIMATIC CATEGORY ACC. TO EN 60068-1
2500 VDC, 2 s
55/125/21
C0G, U2J, X7R
CERAMIC DIELECTRIC
25/085/21
X5F, Y5U, Z5U
C0G, U2J (Class 1)
X5F, X7R, Y5U, Z5U (Class 2)
OPERATING TEMPERATURE RANGE
(-55 to +105) °C
Revision: 02-Mar-15
Document Number: 23110
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
561R, 562R, 565R Series
www.vishay.com
Vishay Cera-Mite
DIMENSIONS in inches (millimeters)
Fig. 2
Fig. 1
LO
0.125 max. (3)
LO
0.125 max. (3)
Dmax.
Dmax.
1.250 min. (32)
LS
1.250 min. (32)
LS
Tmax.
Tmax.
ORDERING INFORMATION, CERAMIC 1000 VDC GENERAL PURPOSE
C
(pF)
TOL.
(%)
C0G (NP0)
10
± 20
U2J (N750)
33
± 20
X5F
100
150
200
± 20
220
330
470
500
X7R
1000
± 20
Y5U
1000
+ 100 / - 0
Z5U
1200
1500
2000
2200
2500
2700
3000
± 20
3300
4700
5000
6800
8200
0.010 μF
0.010 μF
0.010 μF + 100 / - 0
0.015 μF
0.020 μF
± 20
0.050 μF
0.10 μF
Dmax.
DIAMETER
INCH (mm)
LS
Tmax.
LEAD SPACE
THICKNESS
INCH (mm)
INCH (mm)
± 1 mm
LO
LEAD OFFSET
INCH (mm)
± 0.5 mm
FIG.
WIRE SIZE
AWG
INCH (mm)
ORDERING
CODE
0.250 (6.4)
0.156 (4.0)
0.250 (6.4)
0.051 (1.3)
2
24
0.020 (0.51)
561R5GAQ10
0.290 (7.4)
0.156 (4.0)
0.250 (6.4)
0.039 (1.0)
2
24
0.020 (0.51)
561R5GAQ33
2
24
0.020 (0.51)
562R5GAT10
562R5GAT15
562R5GAT20
562R5GAT22
562R5GAT33
562R5GAT47
562R5GAT50
0.250 (6.4)
0.156 (4.0)
0.250 (6.4)
0.055 (1.4)
0.043 (1.1)
0.039 (1.0)
0.051 (1.3)
0.039 (1.0)
0.039 (1.0)
0.039 (1.0)
0.290 (7.4)
0.156 (4.0)
0.250 (6.4)
0.047 (1.2)
2
24
0.020 (0.51)
562R5GAD10
0.290 (7.4)
0.156 (4.0)
0.250 (6.4)
0.039 (1.0)
2
24
0.020 (0.51)
562R5HKD10
0.290 (7.4)
0.156 (4.0)
0.250 (6.4)
0.370 (9.4)
0.370 (9.4)
0.440 (11.2)
0.440 (11.2)
0.490 (12.4)
0.490 (12.4)
0.490 (12.4)
0.560 (14.2)
0.680 (17.3)
0.770 (19.6)
0.950 (24.1)
0.156 (4.0)
0.156 (4.0)
0.156 (4.0)
0.156 (4.0)
0.156 (4.0)
0.156 (4.0)
0.156 (4.0)
0.156 (4.0)
0.156 (4.0)
0.200 (5.1)
0.200 (5.1)
0.250 (6.4)
0.250 (6.4)
0.250 (6.4)
0.250 (6.4)
0.375 (9.5)
0.250 (6.4)
0.375 (9.5)
0.375 (9.5)
0.375 (9.5)
0.375 (9.5)
0.375 (9.5)
0.043 (1.1)
0.039 (1.0)
0.047 (1.2)
0.047 (1.2)
0.043 (1.1)
0.043 (1.1)
0.039 (1.0)
0.039 (1.0)
0.047 (1.2)
0.043 (1.1)
0.047 (1.2)
0.043 (1.1)
0.047 (1.2)
0.047 (1.2)
0.043 (1.1)
0.043 (1.1)
0.047 (1.2)
0.047 (1.2)
0.047 (1.2)
2
24
0.020 (0.51)
1
22
0.025 (0.64)
562R5GAD12
562R5GAD15
562R5GAD20
562R5GAD22
562R5GAD25
562R5GAD27
562R5GAD30
562R5GAD33
562R5GAD47
562R5GAD50
562R5GAD68
562R5GAD82
562R5GAS10
562R5HKMS10
562R5HKS10
562R5GAS15
562R5GAS20
565R10HKS50
565R10GAP10
TAPE AND REEL OPTIONS
• Tape and reel available on diameter sizes 0.250" to 0.680"
• Part number codes and specifications for tape and reel packaging are found in the general information document - find
web-link below
RELATED DOCUMENTS
General Information
Revision: 02-Mar-15
www.vishay.com/doc?23140
Document Number: 23110
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000