QUAD HIFREQ Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Capacitors for RF Power Applications FEATURES • Case size 0505, 1111, 2525, and 3838 Available • Ultra-stable, high Q dielectric material • Lead (Pb)-free terminations code “X” Available • Tin / lead termination code “L” • Non-magnetic copper termination code “C” • Reliable Noble Metal Electrode (NME) system Available • High frequency • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. APPLICATIONS • MRI coils and generators • RF instruments • Lasers, CATV, UHF / microwave RF power amplifiers • Filter networks, timing circuits • Mixers, oscillators impedance matching networks ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at 25 °C unless otherwise specified Operating Temperature: full range: -55 °C to +125 °C Extended Temperature (up to 500 VDC): 0505: -55 °C to 200 °C from 0.1 pF to 75 pF 1111: -55 °C to 200 °C from 0.2 pF to 200 pF Capacitance Range: 0505: 0.1 pF to 100 pF 1111: 0.2 pF to 1000 pF 2525: 1.0 pF to 2700 pF 3838: 1.0 pF to 5100 pF Voltage Rating: 0505: 200 VDC to 250 VDC 1111: 300 VDC to 1500 VDC 2525: 300 VDC to 3600 VDC 3838: 500 VDC to 7200 VDC Temperature Coefficient of Capacitance (TCC): C0G (D): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C with zero (0) VDC applied Revision: 17-Nov-15 Dissipation Factor (DF): C0G (D): 0.05 % max. at 1.0 VRMS and 1 MHz for values 1000 pF C0G (D): 0.05 % max. at 1.0 VRMS and 1 kHz for values > 1000 pF Aging Rate: 0 % maximum per decade Insulation Resistance (IR): at +25 °C and rated voltage 100 000 M minimum or 1000 F, whichever is less at +125 °C and rated voltage 10 000 M minimum or 100 F, whichever is less Dielectric Strength Test: performed per method 103 of EIA-198-2-E. Applied test voltages: 250 VDC-rated: min. 250 % of rated voltage 300 VDC-rated: min. 150 % of rated voltage 630 VDC- to 1000 VDC-rated: 150 % of rated voltage 1500 VDC and up: 120 % rated voltage Document Number: 45221 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CASE D = NP0 0505 1111 2525 3838 MAXIMUM VOLTAGE (V) 250 1500 3600 7200 CAPACITANCE MINIMUM 0.1 pF 0.2 pF 1.0 pF 1.0 pF MAXIMUM 100 pF 1000 pF 2700 pF 5100 pF Notes • For values below 0.4 pF and tolerance ± 0.05 pF, contact [email protected] Detail ratings see “Selection Chart” ORDERING INFORMATION VJ0505 D 1R0 B X C A C CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (1) MARKING PACKAGING 0505 1111 2525 3838 D = HIFREQ Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Examples: 1R0 = 1.0 pF V = ± 0.05 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.50 pF F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % C = non-magnetic copper barrier 100 % tin plate matte finish X = Ni barrier 100 % tin plate matte finish L = Ni barrier with tin lead plated finish min. 4 % lead C = 200 V P = 250 V D = 300 V E = 500 V L = 630 V I = 800 V G = 1000 V R = 1500 V F = 2000 V O = 2500 V H = 3000 V W = 3600 V S = 7200 V A = no marking M = marking (EIA) Q = marking (non EIA) Note Details see “Selection Chart” T = 7" reel / plastic tape J = 7" reel (low quantity) R = 11 1/4" / 13" reel / plastic tape W = waffle pack Note (1) DC voltage rating should not be exceeded in application ENVIRONMENTAL STATUS TERMINATION CODE X L C TERMINATION DESCRIPTION Ni barrier 100 % tin plated matte finish Ni barrier with tin lead plated finish min. 4 % lead Cu barrier 100 % tin plated matte finish (non-magnetic) RoHS COMPLIANT Yes No Yes VISHAY GREEN Yes No Yes DIMENSIONS in inches (millimeters) W L T MAX. P CASE CODE STYLE 0505 VJ0505 1111 VJ1111 2525 VJ2525 3838 VJ3838 LENGTH (L) 0.055 ± 0.025 (1.40 ± 0.64) 0.117 ± 0.028 (2.98 ± 0.70) 0.250 + 0.020 / - 0.030 (6.35 + 0.508 / - 0.762) 0.360 - 0.400 (9.14 - 10.15) WIDTH (W) 0.055 ± 0.015 (1.40 ± 0.38) 0.110 ± 0.030 (2.79 ± 0.76) 0.250 ± 0.015 (6.35 ± 0.381) 0.360 - 0.400 (9.14 - 10.15) MAXIMUM THICKNESS (T) 0.057 (1.45) 0.102 (2.59) 0.102 (2.59) 0.118 (3.00) TERMINATIONS PAD (P) MINIMUM MAXIMUM (1) 0.004 0.016 (0.10) (0.41) 0.012 0.018 (0.30) (0.46) 0.010 0.030 (0.25) (0.76) 0.010 0.030 (0.25) (0.76) Note For copper terminations add 0.01 mm to maximum termination pad (1) Revision: 17-Nov-15 Document Number: 45221 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE VJ0505 CASE CODE 0505 VOLTAGE (VDC) 200 250 VOLTAGE CODE C P CAP. CODE CAP. 0R1 0.1 pF • • 0R2 0.2 pF • • 0R3 0.3 pF • • 0R4 0.4 pF • • 0R5 0.5 pF • • 0R6 0.6 pF • • 0R7 0.7 pF • • 0R8 0.8 pF • • 0R9 0.9 pF • • 1R0 1.0 pF • • 1R1 1.1 pF • • 1R2 1.2 pF • • 1R3 1.3 pF • • 1R4 1.4 pF • • 1R5 1.5 pF • • 1R6 1.6 pF • • 1R7 1.7 pF • • 1R8 1.8 pF • • 1R9 1.9 pF • • 2R0 2.0 pF • • 2R1 2.1 pF • • 2R2 2.2 pF • • 2R4 2.4 pF • • 2R7 2.7 pF • • 3R0 3.0 pF • • 3R3 3.3 pF • • 3R6 3.6 pF • • 3R9 3.9 pF • • 4R3 4.3 pF • • 4R7 4.7 pF • • 5R1 5.1 pF • • 5R6 5.6 pF • • 6R2 6.2 pF • • 6R8 6.8 pF • • 7R5 7.5 pF • • 8R2 8.2 pF • • 9R1 9.1 pF • • 100 10 pF • • 110 11 pF • • 120 12 pF • • 130 13 pF • • 150 15 pF • • 180 18 pF • • 200 20 pF • • 220 22 pF • • 240 24 pF • • 270 27 pF • • 300 30 pF • • 330 33 pF • • 360 36 pF • • 390 39 pF • • 430 43 pF • • 470 47 pF • • 510 51 pF • • 560 56 pF • • 620 62 pF • 680 68 pF • 750 75 pF • 820 82 pF • 910 91 pF • 101 100 pF • Notes RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L” • Plastic carrier tape (1) For values below 0.4 pF and tolerance ± 0.05 pF contact [email protected] Revision: 17-Nov-15 TOLERANCE V, B, C, D (1) V, B, C, D (1) V, B, C, D (1) V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M Document Number: 45221 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE VJ1111 CASE CODE 1111 300 630 1000 VOLTAGE (VDC) VOLTAGE CODE D L G CAP. CODE CAP. • • • 0R2 0.2 pF 0R3 0.3 pF • • • 0R4 0.4 pF • • • 0R5 0.5 pF • • • • • • 0R6 0.6 pF • • • 0R7 0.7 pF 0R8 0.8 pF • • • • • • 0R9 0.9 pF • • • 1R0 1.0 pF 1R1 1.1 pF • • • • • • 1R2 1.2 pF • • • 1R3 1.3 pF 1R4 1.4 pF • • • • • • 1R5 1.5 pF • • • 1R6 1.6 pF 1R7 1.7 pF • • • • • • 1R8 1.8 pF • • • 1R9 1.9 pF 2R0 2.0 pF • • • • • • 2R1 2.1 pF • • • 2R2 2.2 pF 2R4 2.4 pF • • • • • • 2R7 2.7 pF • • • 3R0 3.0 pF 3R3 3.3 pF • • • • • • 3R6 3.6 pF • • • 3R9 3.9 pF 4R3 4.3 pF • • • • • • 4R7 4.7 pF • • • 5R1 5.1 pF 5R6 5.6 pF • • • • • • 6R2 6.2 pF • • • 6R8 6.8 pF 7R5 7.5 pF • • • • • • 8R2 8.2 pF • • • 9R1 9.1 pF 100 10 pF • • • • • • 110 11 pF • • • 120 12 pF 130 13 pF • • • • • • 150 15 pF • • • 180 18 pF 200 20 pF • • • • • • 220 22 pF • • • 240 24 pF 270 27 pF • • • • • • 300 30 pF 330 33 pF • • • • • • 360 36 pF • • • 390 39 pF 430 43 pF • • • • • • 470 47 pF • • • 510 51 pF 560 56 pF • • • • • • 620 62 pF • • • 680 68 pF 750 75 pF • • • • • • 820 82 pF • • • 910 91 pF Notes RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L” • Plastic carrier tape (1) For values below 0.4 pF and tolerance ± 0.05 pF contact [email protected] Revision: 17-Nov-15 1500 R • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • TOLERANCE V, B, C, D (1) V, B, C, D (1) V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, B, C, D V, F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M Document Number: 45221 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 101 100 pF C0G (D) VJ1111 1111 TOLERANCE 300 D 630 L 1000 G 1500 R • • • • F, G, J, K, M • F, G, J, K, M 111 110 pF • • • 121 120 pF • • • F, G, J, K, M 131 130 pF • • • F, G, J, K, M 151 150 pF • • • F, G, J, K, M 181 180 pF • • • 201 200 pF • • F, G, J, K, M 221 220 pF • • F, G, J, K, M 241 240 pF • • F, G, J, K, M 301 300 pF • • F, G, J, K, M 331 330 pF • • F, G, J, K, M 361 360 pF • • F, G, J, K, M 391 390 pF • • F, G, J, K, M 431 430 pF • • F, G, J, K, M 471 470 pF • • F, G, J, K, M 511 510 pF • F, G, J, K, M 561 560 pF • F, G, J, K, M 621 620 pF • F, G, J, K, M 681 680 pF • F, G, J, K, M 751 750 pF • F, G, J, K, M 821 820 pF • F, G, J, K, M 911 910 pF • F, G, J, K, M 102 1.0 nF • F, G, J, K, M F, G, J, K, M Notes RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L” • Plastic carrier tape (1) For values below 0.4 pF and tolerance ± 0.05 pF contact [email protected] Revision: 17-Nov-15 Document Number: 45221 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE VJ2525 CASE CODE 2525 VOLTAGE (VDC) 300 500 800 1000 1500 2000 VOLTAGE CODE D E I G R F CAP. CODE CAP. • • • • • • 1R0 1.0 pF 1R1 1.1 pF • • • • • • 1R2 1.2 pF • • • • • • 1R3 1.3 pF • • • • • • 1R4 1.4 pF • • • • • • 1R5 1.5 pF • • • • • • 1R6 1.6 pF • • • • • • 1R7 1.7 pF • • • • • • 1R8 1.8 pF • • • • • • 1R9 1.9 pF • • • • • • 2R0 2.0 pF • • • • • • 2R1 2.1 pF • • • • • • 2R2 2.2 pF • • • • • • 2R4 2.4 pF • • • • • • 2R7 2.7 pF • • • • • • 3R0 3.0 pF • • • • • • 3R3 3.3 pF • • • • • • 3R6 3.6 pF • • • • • • 3R9 3.9 pF • • • • • • 4R3 4.3 pF • • • • • • 4R7 4.7 pF • • • • • • 5R1 5.1 pF • • • • • • 5R6 5.6 pF • • • • • • 6R2 6.2 pF • • • • • • 6R8 6.8 pF • • • • • • 7R5 7.5 pF • • • • • • 8R2 8.2 pF • • • • • • 9R1 9.1 pF • • • • • • 100 10 pF • • • • • • 110 11 pF • • • • • • 120 12 pF • • • • • • 130 13 pF • • • • • • 150 15 pF • • • • • • 160 16 pF • • • • • • 180 18 pF • • • • • • 200 20 pF • • • • • • 220 22 pF • • • • • • 240 24 pF • • • • • • 270 27 pF • • • • • • 300 30 pF • • • • • • 330 33 pF • • • • • • 360 36 pF • • • • • • 390 39 pF • • • • • • 430 43 pF • • • • • • 470 47 pF • • • • • • 510 51 pF • • • • • • 560 56 pF • • • • • • 620 62 pF • • • • • • 680 68 pF • • • • • • 750 75 pF • • • • • • 820 82 pF • • • • • • 910 91 pF • • • • • • Notes RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L” • Plastic carrier tape - For tolerance B contact [email protected] Revision: 17-Nov-15 2500 O 3000 H 3600 W • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • TOLERANCE B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M Document Number: 45221 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. C0G (D) 300 D 500 E 800 I 1000 G VJ2525 2525 1500 R 2000 F 2500 O 3000 H 3600 W • TOLERANCE 101 100 pF • • • • • • • • F, G, J, K, M 111 110 pF • • • • • • • • F, G, J, K, M 121 120 pF • • • • • • • • F, G, J, K, M 131 130 pF • • • • • • • • F, G, J, K, M 151 150 pF • • • • • • • • F, G, J, K, M 161 160 pF • • • • • • • • F, G, J, K, M 181 180 pF • • • • • • • • F, G, J, K, M 201 200 pF • • • • • • • • F, G, J, K, M 221 220 pF • • • • • • • • F, G, J, K, M 241 240 pF • • • • • • • • F, G, J, K, M 271 270 pF • • • • • • • • F, G, J, K, M 301 300 pF • • • • • • F, G, J, K, M 331 330 pF • • • • • • F, G, J, K, M 361 360 pF • • • • • • F, G, J, K, M 391 390 pF • • • • • • F, G, J, K, M 431 430 pF • • • • • • F, G, J, K, M 471 470 pF • • • • • • F, G, J, K, M 511 510 pF • • • • • F, G, J, K, M 561 560 pF • • • • • F, G, J, K, M 621 620 pF • • • • • F, G, J, K, M 681 680 pF • • • • • F, G, J, K, M 751 750 pF • • • • • F, G, J, K, M 821 820 pF • • • • • F, G, J, K, M 911 910 pF • • • • • F, G, J, K, M 102 1.0 nF • • • • • F, G, J, K, M 112 1.1 nF • • • • • F, G, J, K, M 122 1.2 nF • • • • • F, G, J, K, M 152 1.5 nF • • • F, G, J, K, M 182 1.8 nF • • • F, G, J, K, M 222 2.0 nF • • • F, G, J, K, M 242 2.4 nF • F, G, J, K, M 272 2.7 nF • F, G, J, K, M Notes RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L” • Plastic carrier tape - For tolerance B contact [email protected] Revision: 17-Nov-15 Document Number: 45221 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE VJ3838 CASE CODE 3838 500 1000 2500 3600 VOLTAGE (VDC) VOLTAGE CODE E G O W CAP. CODE CAP. • • • • 1R0 1.0 pF 1R1 1.1 pF • • • • 1R2 1.2 pF • • • • 1R3 1.3 pF • • • • 1R4 1.4 pF • • • • 1R5 1.5 pF • • • • 1R6 1.6 pF • • • • 1R7 1.7 pF • • • • 1R8 1.8 pF • • • • 1R9 1.9 pF • • • • 2R0 2.0 pF • • • • 2R1 2.1 pF • • • • 2R2 2.2 pF • • • • 2R4 2.4 pF • • • • 2R7 2.7 pF • • • • 3R0 3.0 pF • • • • 3R3 3.3 pF • • • • 3R6 3.6 pF • • • • 3R9 3.9 pF • • • • 4R3 4.3 pF • • • • 4R7 4.7 pF • • • • 5R1 5.1 pF • • • • 5R6 5.6 pF • • • • 6R2 6.2 pF • • • • 6R8 6.8 pF • • • • 7R5 7.5 pF • • • • 8R2 8.2 pF • • • • 9R1 9.1 pF • • • • 100 10 pF • • • • 110 11 pF • • • • 120 12 pF • • • • 130 13 pF • • • • 150 15 pF • • • • 160 16 pF • • • • 180 18 pF • • • • 200 20 pF • • • • 220 22 pF • • • • 240 24 pF • • • • 270 27 pF • • • • 300 30 pF • • • • 330 33 pF • • • • 360 36 pF • • • • 390 39 pF • • • • 430 43 pF • • • • 470 47 pF • • • • 510 51 pF • • • • 560 56 pF • • • • 620 62 pF • • • • 680 68 pF • • • • 750 75 pF • • • • 820 82 pF • • • • 910 91 pF • • • • Notes RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L” • Plastic carrier tape - For tolerance B contact [email protected] Revision: 17-Nov-15 5000 M 7200 S • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • TOLERANCE B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M Document Number: 45221 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 101 100 pF 111 110 pF 121 120 pF 131 130 pF 151 150 pF 161 160 pF 181 180 pF 201 200 pF 221 220 pF 241 240 pF 271 270 pF 301 300 pF 331 330 pF 361 360 pF 391 390 pF 431 430 pF 471 470 pF 511 510 pF 561 560 pF 621 620 pF 681 680 pF 751 750 pF 821 820 pF 911 910 pF 102 1.0 nF 112 1.1 nF 122 1.2 nF 152 1.5 nF 182 1.8 nF 222 2.0 nF 242 2.4 nF 272 2.7 nF 302 3.0 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 512 5.1 nF C0G (D) VJ3838 3838 500 E 1000 G 2500 O 3600 W 5000 M 7200 S • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • TOLERANCE F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M Notes RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L” • Plastic carrier tape - For tolerance B contact [email protected] Revision: 17-Nov-15 Document Number: 45221 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS ESR VS. FREQUENCY SIZE 0505 QUAD RF MLCC 100 Q VALUE VS. FREQUENCY SIZE 0505 QUAD RF MLCC 10 000 1 pF 10 1000 10 pF 1 Q ESR (Ω) 1 pF 100 10 pF 100 pF 0.1 10 100 pF 0.01 1 10 100 FREQUENCY (MHz) 1000 10 SRF VS. CAPACITANCE SIZE 0505 QUAD RF MLCC 10 10 100 FREQUENCY (MHz) 1000 CURRENT RATING SIZE 0505 QUAD RF MLCC, EXT. VOLTAGE CURRENT (ARMS) SRF (GHz) 1000 MHz 1 1 500 MHz 150 MHz 0.1 0.1 1 10 CAPACITANCE (pF) 100 ESR VS. FREQUENCY SIZE 1111 QUAD RF MLCC 100 1 100 Q VALUE VS. FREQUENCY SIZE 1111 QUAD RF MLCC 10 000 1.5 pF 10 1000 1.5 pF 1 10 pF 10 pF Q ESR (Ω) 10 CAPACITANCE (pF) 0.1 180 pF 0.01 1000 pF 100 180 pF 1000 pF 10 0.001 1 10 Revision: 17-Nov-15 100 FREQUENCY (MHz) 1000 10 100 FREQUENCY (MHz) 1000 Document Number: 45221 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS SRF VS. CAPACITANCE SIZE 1111 QUAD RF MLCC 100 CURRENT (ARMS) SRF (GHz) 10 1 CURRENT RATING SIZE 1111 QUAD RF MLCC, EXT. VOLTAGE 10 1 GHz 150 MHz 1 30 MHz 0.1 0.1 1 10 100 CAPACITANCE (pF) ESR VS. FREQUENCY SIZE 2525 QUAD RF MLCC 100 1 1000 10 100 CAPACITANCE (pF) 1000 Q VALUE VS. FREQUENCY SIZE 2525 QUAD RF MLCC 10 000 1 pF 10 1000 24 pF 1 Q ESR (Ω) 1 pF 100 270 pF 24 pF 100 pF 100 pF 0.1 10 270 pF 0.01 1 10 100 FREQUENCY (MHz) 1000 10 SRF VS. CAPACITANCE SIZE 2525 QUAD RF MLCC 10 100 100 FREQUENCY (MHz) 1000 CURRENT RATING SIZE 2525 QUAD RF MLCC, EXT. VOLTAGE CURRENT (ARMS) SRF (GHz) 150 MHz 1 0.1 10 500 MHz 30 MHz 1 10 MHz 0.01 0.1 1 Revision: 17-Nov-15 10 100 1000 CAPACITANCE (pF) 10 000 1 10 100 1000 CAPACITANCE (pF) 10 000 Document Number: 45221 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS ESR VS. FREQUENCY SIZE 3838 QUAD RF MLCC 1 0.1 1 0.1 2200 pF ESR (Ω) 22 pF ESR (Ω) ESR VS. FREQUENCY SIZE 3838 QUAD RF MLCC 100 pF 0.01 680 pF 5100 pF 0.01 180 pF 390 pF 0.001 0.001 10 100 FREQUENCY (MHz) 1000 10 Q VALUE VS. FREQUENCY SIZE 3838 QUAD RF MLCC 10 000 100 FREQUENCY (MHz) Q VALUE VS. FREQUENCY SIZE 3838 QUAD RF MLCC 10 000 100 pF 1000 1000 680 pF 2200 pF 100 Q Q 22 pF 180 pF 100 5100 pF 390 pF 10 10 1 1 10 100 FREQUENCY (MHz) 1000 1 SRF VS. CAPACITANCE SIZE 3838 QUAD RF MLCC 100 CURRENT (ARMS) 10 000 SRF (MHz) 1000 1000 100 10 10 100 FREQUENCY (MHz) 1000 CURRENT RATING SIZE 3838 QUAD RF MLCC, EXT. VOLTAGE 30 MHz 10 10 MHz 1 2 MHz 0.1 0.01 1 Revision: 17-Nov-15 10 100 1000 CAPACITANCE (pF) 10 000 1 10 100 1000 CAPACITANCE (pF) 10 000 Document Number: 45221 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS TEMPERATURE COEFFICIENT OF CAPACITANCE MIN. INSULATION RESISTANCE VS. TEMPERATURE 10 000 1.5 INSULATION RESISTANCE (ΩF) % CAPACITANCE CHANGE 2.0 1.0 1000 0.5 0.0 - 0.5 NP0 100 - 1.0 - 1.5 - 2.0 - 75 - 50 - 25 0 25 50 10 75 100 125 150 175 10 25 TEMPERATURE °C AGING RATE 150 VOLTAGE COEFFICIENT OF CAPACITANCE 0.2 % CAPACITANCE CHANGE % CAPACITANCE CHANGE 0.2 50 100 TEMPERATURE °C 0.1 0.0 - 0.1 0.1 0.0 - 0.1 - 0.2 - 0.2 1 10 100 1000 10 000 0 10 20 STANDARD PACKAGING QUANTITIES 30 40 50 60 70 80 90 100 DC VOLTS APPLIED HOURS (1)(2)(3)(4) 7" REEL QUANTITIES PLASTIC TAPE LOW QUANTITY PACKAGING CODE “J” “T” 11 1/4" AND 13" REEL QUANTITIES WAFFLE PACK PLASTIC TAPE PACKAGING CODE “R” PLASTIC WAFFLE PACK PACKAGING CODE “W” CASE CODE TAPE SIZE 0505 8 mm 3000 1000 10 000 n/a 1111 8 mm 2500 1000 9000 n/a 2525 12 mm 800 500 n/a 81 3838 16 mm 400 100 n/a 35 Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (3) n/a = not available (4) Final quantities for packaging can depend on product thickness STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment (1 year for copper). Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 17-Nov-15 Document Number: 45221 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000