HV High Voltage Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications FEATURES • Excellent reliability and thermal shock performance • High voltage breakdown compared to standard design • High reliable serial electrode design • Protective surface coating may be required to prevent surface arcing • Wet build process • Reliable Noble Metal Electrode (NME) system • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • Input filter capacitors Output filter capacitors Snubber capacitors reduce MOSFET voltage spikes Filtering for switching power supplies For lighting and other AC applications please contact: [email protected] ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Capacitance Range: 180 pF to 15 nF Voltage Range: 3000 VDC, 4000 VDC, 5000 VDC Temperature Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC applied Dissipation Factor (DF): 2.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: at +25 °C 100 000 M min. or 1000 F whichever is less at +125 °C 10 000 M min. or 100 F whichever is less Aging Rate: 1 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E Applied test voltages 3000 VDC- / 4000 VDC- / 5000 VDC-rated: min. 120 % of rated voltage Revision: 18-May-16 Document Number: 45228 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CAPACITANCE CASE MAXIMUM VOLTAGE (V) MINIMUM MAXIMUM 1812 5000 180 pF 3.9 nF 1825 5000 330 pF 10 nF 2220 5000 390 pF 10 nF 2225 5000 470 pF 15 nF X7R Note • Detail ratings see “Selection Chart” ORDERING INFORMATION HV2220 Y 152 K X M A T HV (2) CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (1) MARKING PACKAGING PROCESS CODE 1812 1825 2220 2225 Y = X7R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples 152 = 1500 pF J=±5% K = ± 10 % M = ± 20 % X = Ni barrier 100 % tin plated matte finish H = 3000 V V = 4000 V M = 5000 V A= unmarked HV = high voltage T = 7" reel / plastic tape R = 11 1/4" / 13" reel / plastic tape Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: [email protected] (2) Process code with 2 digits has to be added. ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATION PAD (P) STYLE LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 1812 HV1812 0.177 ± 0.012 (4.50 ± 0.30) 0.126 ± 0.008 (3.20 ± 0.20) 0.106 (2.70) 0.010 (0.25) 0.030 (0.76) 1825 HV1825 0.177 ± 0.012 (4.50 ± 0.30) 0.252 ± 0.010 (6.40 ± 0.25) 0.106 (2.70) 0.010 (0.25) 0.030 (0.76) 2220 HV2220 0.220 ± 0.010 (5.59 ± 0.25) 0.200 ± 0.010 (5.08 ± 0.25) 0.106 (2.70) 0.010 (0.25) 0.030 (0.76) 2225 HV2225 0.220 ± 0.010 (5.59 ± 0.25) 0.250 ± 0.010 (6.35 ± 0.25) 0.106 (2.70) 0.010 (0.25) 0.030 (0.76) CASE CODE Revision: 18-May-16 Document Number: 45228 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R HV1812 (1) STYLE EIA CODE HV1825 (1) 1812 HV2220 (1) 1825 HV2225 (1) 2220 2225 VOLTAGE (VDC) 3000 4000 5000 3000 4000 5000 3000 4000 5000 3000 4000 5000 VOLTAGE CODE H V M H V M H V M H V M CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF • • 271 270 pF • • 331 330 pF • • • • 391 390 pF • • • • 471 470 pF • • • • • • • 561 560 pF • • • • • • • • 681 680 pF • • • • • • • • • 821 820 pF • • • • • • • • • • • 102 1.0 nF • • • • • • • • 122 1.2 nF • • • • • • • • • • 152 1.5 nF • • • • • • • • • • 182 1.8 nF • • • • • • • • • • 222 2.2 nF • • • • • • • • 272 2.7 nF • • • • • • • • 332 3.3 nF • • • • • • • • 392 3.9 nF • • • • • 472 4.7 nF • • • • 562 5.6 nF • • • • 682 6.8 nF • • • 822 8.2 nF • • • 103 10 nF • • • 123 12 nF • 153 15 nF • 183 18 nF Note (1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034 Revision: 18-May-16 Document Number: 45228 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS TEMPERATURE COEFFICIENT OF CAPACITANCE AGING RATE 6 % CAPACITANCE CHANGE 1.0 Δ CAPACITANCE (%) 4 2 0 -2 -4 -6 -8 -10 0.0 -1.0 -2.0 -3.0 -4.0 -60 -40 -20 0 20 40 60 80 100 120 140 TEMPERATURE (°C) 1 DISSIPATION FACTOR VS. TEMPERATURE 0.040 10 100 HOURS 1000 10 000 IMPEDANCE / ESR VS. FREQUENCY HV1812Y181KXMATHV 1000 0.030 100 ESR / |Z| (Ω) DISSIPATION FACTOR 0.035 0.025 0.020 0.015 0.010 |Z| 10 1 0.005 0.000 0.1 -55 -35 -15 5 25 45 TEMPERATURE (°C) 65 85 1 IMPEDANCE / ESR VS. FREQUENCY HV1812Y152KXVATHV 1000 100 10 100 1000 FREQUENCY (MHz) 10 000 IMPEDANCE / ESR VS. FREQUENCY HV1825Y182KXMATHV 1000 100 ESR ESR / |Z| (Ω) ESR / |Z| (Ω) ESR 10 |Z| 1 ESR 10 |Z| 1 0.1 0.1 1 Revision: 18-May-16 10 100 1000 FREQUENCY (MHz) 10 000 1 10 100 1000 FREQUENCY (MHz) 10 000 Document Number: 45228 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HV High Voltage Series www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS IMPEDANCE / ESR VS. FREQUENCY HV1825Y103KXHATHV 100 100 10 ESR 1 ESR / |Z| (Ω) ESR / |Z| (Ω) 10 IMPEDANCE / ESR VS. FREQUENCY HV2220Y103KXHATHV |Z| 0.1 ESR 1 |Z| 0.1 0.01 0.01 1 10 100 1000 FREQUENCY (MHz) 10 000 1 10 100 1000 FREQUENCY (MHz) 10 000 STANDARD PACKAGING QUANTITIES (1) CASE CODE TAPE SIZE 7" REEL QUANTITIES PACKAGING CODE “T” 11 1/4" AND 13" REEL QUANTITIES PACKAGING CODE “R” 1812 12 mm 1000 4000 1825 12 mm 1000 4000 2220 12 mm 1000 4000 2225 12 mm 500 4000 Note (1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 18-May-16 Document Number: 45228 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000