Link to PDF datasheet (pdf 374kb)

www.hamlin.com
FLEX-14 Features and Benefits
Features
Benefits
Applications
• Sub-miniature normally open switch
with 14.00mm x 2.28mm (0.551” x
0.090”) glass envelope
• Longer than standard, easily formed
leads
• 1010 Ohms insulation resistance
• Capable of switching up to 200Vdc
• Maximum contact rating 10 Watts
• Available sensitivity range
10-30 AT
• Hermetically sealed switch contacts are
not effected by and have no effect on
their external environment
• Low, stable contact resistance
• Soft leads enable reliable hand forming
• Zero operating power required for
contact closure
• Fit and forget durability
• Well suited to signal switching
•
•
•
•
•
•
Reed relays
Security
Limit switching
Telecoms
Office equipment
Household appliances
DIMENSIONS (in) mm
CL OF OVERLAP
(.872) REF.
22,15
(.583) MIN.
14,80
(.090) MAX.
2,28
(.0185) DIA. REF.
0,47
(.551) MAX.
14,00
(1.744) NOM.
44,30
Switch Type
FLEX-14
Contact Form
A
ELECTRICAL RATINGS
Contact Rating (See note 1)
Watt - max.
10
Voltage
Switching
Breakdown
Vdc - max.
Vdc - min.
200
250
Current
Switching
Carry
A - max.
A - max.
0.5
1.0
Resistance
Contact, Initial
Insulation
Ω - max.
Ω - min.
0.100
1010
Capacitance
Contact
pF - typ.
Temperature
Operating
Storage (5)
°C
°C
0.2
-40 to +125
-65 to +125
OPERATING CHARACTERISTICS
Operate Time (2)
ms - max.
0.55
Release Time (2)
ms - max.
0.20
100
Shock
11ms 1⁄2 sine wave
G - max.
Vibration
50-2000 Hertz
G - max.
30
Hz - typ.
5200
Pull-In Range (3)
Ampere Turns
10-30
Drop-out
Ampere Turns- min
5
Rating Sensitivity (4)
Ampere Turns
20
Resonant Frequency
MAGNETIC CHARACTERISTICS
Test Coil
Notes
1)
2)
L4989
Contact rating-Product of the switching voltage and current should never exceed the wattage rating.
Contact Hamlin for additional load/life information.
Operate (inc. bounce) /Release Time-per EIA/NARM RS421A, diode suppressed coil.
Hamlin USA
Tel: +1 920 648 3000 • Fax: +1 920 648 3001 • Email: [email protected]
Hamlin UK
Tel: +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Email: [email protected]
Hamlin Germany Tel: +49(0) 6142 923920 • Fax: +49(0) 6142 923921 • Email: [email protected]
Hamectrol France Tel: +33 (0) 1 6047 3000 • Fax: +33(0) 1 6015 9136 • Email: [email protected]
Issue No: 1 Date: 01/03/07 DCR: B5013
3) Pull in Range-Contact Hamlin for tolerances available within this range.
4) Rating Sensitivity-The value at which contact ratings and operating characteristics are determined. Derating
may be required below this value.
5) Storage Temperature-Long time exposure at elevated temperature may degrade solderability of the leads.
DETAILS PROVIDED ON THIS DATA SHEET ARE PROVIDED FOR
INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED
UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE.
Product performance may be affected by the application to which the
product is applied. Upon request, HAMLIN will assist purchasers by
providing information specific to any particular application. HAMLIN
disclaims any and all liability whatsoever for any purchaser’s reliance
upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.