www.hamlin.com 59145 and 59150 Flange Mount Features and Benefits File E61760(N) 57145, 57150 Actuator 59145, 59150 Sensor Features Benefits Applications • 2 part magnetically operated proximity sensor • Flying leads can exit either left or right hand side of the housing • Case design allows screw down or adhesive mounting • Customer defined sensitivity • Choice of cable length and connector • No standby power requirement • Operates through non-ferrous materials such as wood, plastic or aluminium • Hermetically sealed, magnetically operated contacts continue to operate long after optical and other technologies fail due to contamination • Position and limit sensing • Security system switch • Linear actuators • Door switch DIMENSIONS (in) mm Note: 59145 shown. 59150 leads exit opposite. CUSTOMER OPTIONS - Switching Specifications TABLE 1 Contact Type Form A Normally Open Normally Open High Voltage Change Over Normally Closed Power Watt - max. 1 2 3 4 10 10 5 Voltage Switching Vdc - max. 5 200 300 175 175 Breakdown Current Switching Vdc - min. 250 450 200 200 A - max. 0.5 0.5 0.25 0.25 Resistance Carry A - max. 1.2 1.5 1.5 1.5 Contact, Initial Ω - max. 0.2 0.2 0.2 0.2 Insulation Ω - min. 1010 1010 109 109 pF - typ. 0.3 0.2 0.3 0.3 °C -40 to +105 -20 to +105 -40 to +105 -40 to +105 Switch Type Capacitance Contact Temperature Operating Storage °C -65 to +105 -65 to +105 -65 to +105 -65 to +105 Time Operate ms - max. 1.0 1.0 3.0 3.0 Release ms - max. 1.0 1.0 3.0 3.0 Shock 11ms 1⁄2 sine G - max. 100 100 50 50 Vibration 50-2000 Hz G - max. 30 30 30 30 CUSTOMER OPTIONS - Sensitivity, Cable Length and Termination Specification TABLE 2 TABLE 3 TABLE 4 Termination Options:- D Cable Type:- Sensitivity Options:Activate Distances are approximate using Hamlin 57145/57150 actuator as illustrated Switch AT before modification 24 AWG 7/32 PVC 105oC UL1430/UL1569 Standard Lengths SELECT OPTION Select Option Switch Type 1 2 3 4 S Pull In AT Range Normally Open 12-18 High Voltage Change Over 15-20 Normally Closed T Activate Distance d (in) mm (.531) 13,5 (.433) 11,0 Pull In AT Range 17-23 20-25 U Activate Distance d (in) mm (.453) 11,5 (.354) 9,0 Pull In AT Range 22-28 25-30 Activate Distance d (in) mm (.394) 10,0 (.335) 8,5 (in) V Pull In AT Range 27-33 CABLE LENGTH Activate Distance d (in) mm (.354) 9,0 SELECT OPTION A or A or FF mm DESCRIPTION (2 WIRE VERSIONS ILLUSTRATED) Tinned or untinned leads B Crimped terminals (39,37)1,000 C 6.35mm fastons 03 (19,69) 500 D AMP MTE 2.54mm pitch 04 (29,53) 750 05 (39,37) 1000 E JST XHP 2.5mm pitch 02 (11,81)300 05 ORDERING INFORMATION N.B. 57145/57150 actuator sold separately 59145/59150 59036 X X XX X Series 59145/59150 Table 1 Switch Type Table 2 Sensitivity Table 3 Cable Length Termination Table 4 Hamlin USA Hamlin UK Hamlin Germany Hamectrol France Tel: Tel: Tel: Tel: +1 920 648 3000 • Fax: +1 920 648 3001 • Email: [email protected] +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Email: [email protected] +49 (0)6142 923920 • Fax: +49 (0) 6142 923921 • Email: [email protected] +33 (0) 1 6047 3000 • Fax: +33 (0) 1 6015 9136 • Email: [email protected] ISSUE No: 4 China DATE: 1/5/3 Hamlin Tel: +86 (0) 512 69365 800 Fax: +86 (0) 512 69365 811 Email: [email protected] 36 DETAILS PROVIDED ON THIS DATA SHEET ARE PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN.