F Series Datasheet

F Series
Vishay BCcomponents
Ceramic Disc Capacitors Class 2,
Low Loss (0.2 %), 500 VDC, 1 kVDC, 2 kVDC and 3 kVDC
tangent
line
FEATURES
D
D
SH
tangent
line
SH
•
•
•
•
•
High reliability
Low losses
High capacitance in small size
Kinked leads
Compliant to RoHS directive 2002/95/EC
APPLICATIONS
F
F
Capacitors with outside and inside kink lead spacing
In electronic circuits where low losses and high capacitance
per volume are essential, for example:
• SMPS
• HF ballast
• Snubber and high voltage circuits
DESIGN
QUICK REFERENCE DATA
DESCRIPTION
Voltage (VDC)
CLASS 2 (Y5R)
500, 1000, 2000, 3000
Min. Capacitance (pF)
100
Max. Capacitance (pF)
4700
Mounting
Through hole
The capacitors consist of a ceramic disc both sides of which
are silver-plated. Connection leads are made of tinned
copper having a diameter of 0.6 mm or 0.8 mm.
The capacitors are supplied with kinked leads and lead
spacings of 5 mm or 7.5 mm and 10 mm. Encapsulation is
made of epoxy-resin, flammable resistant in accordance with
“UL 94 V-0”
MARKING
CAPACITANCE RANGE
Marking indicates capacitance value and tolerance in
accordance with “EIA 198” and voltage marks.
100 pF to 4700 pF
OPERATING TEMPERATURE RANGE
- 30 °C to + 125 °C
TEMPERATURE COEFFICIENT Y5R (2C4)
- 30 °C TO + 85 °C
RATED DC VOLTAGE
500 V; 1 kV; 2 kV; 3 kV
DIELECTRIC STRENGTH
200 % of rated voltage
± 15 %
INSULATION RESISTANCE AT 500 VDC
SECTIONAL SPECIFICATIONS
≥ 10 000 MΩ min.
IEC 60384-9, EIA 198
TOLERANCE ON CAPACITANCE
EXAMPLES OF MARKING CODE
Disc size (Dmax.) ≤ 6.5 mm:
RP = low loss with T.C. Y5P
101K
2 kV
Disc size (Dmax.) ≥ 7.5 mm:
BC
RP
102K
3 kV
± 10 %; ± 20 %
DISSIPATION FACTOR
0.2 % max.
AGING
typical 0.5 % per time decade
Note
The capacitors meet the essential requirements of “IEC 60384-9 and EIA 198”. Unless stated otherwise all electrical values apply at an ambient
temperature of 25 °C ± 3 °C, at normal atmospheric conditions
www.vishay.com
66
For technical questions, contact: [email protected]
Document Number: 28500
Revision: 07-Jan-10
F Series
Ceramic Disc Capacitors Class 2,
Low Loss (0.2 %), 500 VDC, 1 kVDC,
2 kVDC and 3 kVDC
Vishay BCcomponents
ORDERING INFORMATION
CLEAR TEXT CODE
C
(pF)
500 V
100
120
150
180
220
270
330
390
470
560
680
820
1000
500 V
1200
1500
1800
2200
2700
1 kV
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
2 kV
100
120
150
180
220
270
330
390
470
560
TOL.
(%)
DMAX.
(mm)
LEAD SPACING
(mm)
(1)
SH
(mm)
4.0
F101K20Y5RL6.J5.
F121K20Y5RL6.J5.
F151K20Y5RL6.J5.
F181K20Y5RL6.J5.
F221K20Y5RL6.J5.
F271K20Y5RL6.J5.
F331K20Y5RL6.J5.
F391K25Y5RL6.J5.
F471K25Y5RL6.J5.
F561K25Y5RL6.J5.
F681K25Y5RL6.J5.
F821K29Y5RL6.J5.
F102K29Y5RL6.J5.
4.0
F122K33Y5RL6.J5.
F152K33Y5RL6.J5.
F182K39Y5RL6.J5.
F222K39Y5RL6.J5.
F272K47Y5RL63J7.
4.0
F101K25Y5RN6.J5.
F121K25Y5RN6.J5.
F151K25Y5RN6.J5.
F181K25Y5RN6.J5.
F221K25Y5RN6.J5.
F271K29Y5RN6.J5.
F331K29Y5RN6.J5.
F391K29Y5RN6.J5.
F471K29Y5RN6.J5.
F561K33Y5RN6.J5.
F681K33Y5RN6.J5.
F821K39Y5RN6.J5.
F102K39Y5RN6.J5.
F122K43Y5RN6.J5.
F152K43Y5RN6.J5.
F182K47Y5RN63J7.
F222K53Y5RN63J7.
F272K53Y5RN63J7.
F332K69Y5RN63J7.
F392K69Y5RN63J7.
F472K75Y5RN83J0.
4.0
F101K25Y5RP6.K5.
F121K25Y5RP6.K5.
F151K25Y5RP6.K5.
F181K29Y5RP6.K5.
F221K29Y5RP6.K5.
F271K29Y5RP6.K5.
F331K29Y5RP6.K5.
F391K33Y5RP6.K5.
F471K33Y5RP6.K5.
F561K39Y5RP6.K5.
5.0
± 10
5.0
6.5
7.5
8.5
± 10
5.0
10.0
12.0
7.5
6.5
7.5
± 10
5.0
8.5
10.0
11.0
12.5
13.5
7.5
17.5
19.0
10.0
6.5
± 10
Document Number: 28500
Revision: 07-Jan-10
7.5
5.0
13TH DIGIT:
T = REEL; U = AMMO; 3 = BULK
16TH DIGIT:
R = RoHS COMPLIANT
8.5
10.0
For technical questions, contact: [email protected]
www.vishay.com
67
F Series
Vishay BCcomponents
Ceramic Disc Capacitors Class 2,
Low Loss (0.2 %), 500 VDC, 1 kVDC,
2 kVDC and 3 kVDC
ORDERING INFORMATION
CLEAR TEXT CODE
C
(pF)
DMAX.
(mm)
TOL.
(%)
LEAD SPACING
(mm)
SH (1)
(mm)
2 kV
680
10.0
5.0
4.0
820
11.0
1000
1200
12.0
1500
7.5
13.5
± 10
1800
2200
17.5
4.8
2700
19.0
3300
10.0
3900
24.5
4700
3 kV
100
120
150
8.5
180
220
4.0
270
330
7.5
390
10
470
± 10
560
11
680
820
13.5
1000
1200
15
4.8
1500
1800
19
10.0
2200
2700
21
Notes
(1) SH = seated height
• Maximum thickness: 500 V = 3.5 mm; 1 kV = 4.5 mm; 2 kV = 5.0 mm; 3 kV = 6.0 mm
13TH DIGIT:
T = REEL; U = AMMO; 3 = BULK
16TH DIGIT:
R = RoHS COMPLIANT
F681K39Y5RP6.K5.
F821K43Y5RP6.K5.
F102K43Y5RP6.K5.
F122K47Y5RP63K7.
F152K53Y5RP63K7.
F182K53Y5RP63K7.
F222K69Y5RP63K7.
F272K75Y5RP83K0.
F332K75Y5RP83K0.
F392K75Y5RP83K0.
F472K96Y5RP83K0.
F101K33Y5RR6.K7.
F121K33Y5RR6.K7.
F151K33Y5RR6.K7.
F181K33Y5RR6.K7.
F221K33Y5RR6.K7.
F271K33Y5RR6.K7.
F331K33Y5RR6.K7.
F391K39Y5RR6.K7.
F471K39Y5RR6.K7.
F561K43Y5RR6.K7.
F681K43Y5RR6.K7.
F821K53Y5RR63K7.
F102K53Y5RR63K7.
F122K59Y5RR63K7.
F152K59Y5RR63K7.
F182K75Y5RR83K0.
F222K75Y5RR83K0.
F272K84Y5RR83K0.
PACKAGING
PACKAGING TYPE
Bulk
(long lead L ≥ 25.4 mm
Tape and reel
20 to 25
29 to 39
43 to 47
53 to 75
84 to 96
≤ 47
≥ 53
Ammopack
LEAD SPACE
(mm)
SIZE
CODE
≤ 47
≥ 53
all
≤ 6.4
≥ 7.5
all
≤ 6.4
≥ 7.5
all
VOLTAGE
(VDC)
all
< 500
500 ≤ WV ≤ 2000
3000
all
all
< 500
500 ≤ WV < 2000
2000 and 3000
all
all
SPQ
1000
1000
1000
500
250
2500
2000
1000
1000
1000
2000
2000
1500
1500
1500
BOX DIMENSIONS
LxWxH
245 x 120 x 65
370 x 370 x 60
335 x 240 x 50
335 x 290 x 50
360 x 330 x 55
335 x 290 x 50
Note
• The capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack
www.vishay.com
68
For technical questions, contact: [email protected]
Document Number: 28500
Revision: 07-Jan-10
F Series
Ceramic Disc Capacitors Class 2,
Low Loss (0.2 %), 500 VDC, 1 kVDC,
2 kVDC and 3 kVDC
P2
D
Vishay BCcomponents
P
Δh
Δh
Δs
ΔP
Δs
ΔP
H1
W2
H0
L
W1
W0 W
A
e
Ød
Direction of unreeling
P1
D0
F
P0
t1
t
detail A
Kinked capacitors on tape, lead spacing 5.0 mm (0.2") or 7.5 mm (0.3")
DIMENSIONS OF TAPE
SYMBOL
PARAMETER
DIMENSIONS (mm)
FEED-HOLE PITCH
FEED-HOLE PITCH
P0 = 12.7
P0 = 15.0
11.0 max.
14.0 max.
0.6 ± 0.05
0.6 ± 0.05
12.7 ± 1.0
15.0 ± 1.0
12.7 ± 0.3
15.0 ± 0.3
D
d
P (1)
P0
Body diameter
Lead diameter
Pitch between capacitors
Feed-hole pitch
ΔP
P1 (2)
P2 (2)
F
Plane deviation
1.0 max.
1.0 max.
Feed-hole center to lead center
Feed-hole center to component center
Lead spacing
3.85 ± 0.7
6.35 ± 1.3
5.0 + 0.6/- 0.4
3.75 ± 0.7
7.5 ± 1.5
7.5 + 0.6/- 0.4
Δh
W
W0
W1
W2
H0
H1
e
L
D0
t
t1
Component alignment
0 ± 1.0
0 ± 1.0
Tape width
Hold-down tape width
Hole position
Hold-down tape margin
Height to seating plane
Maximum component height
Lead end protrusion
Maximum length of snipped lead
Feed-hole diameter
Total tape thickness
Maximum thickness of tape and wires
18.0 + 1.0/- 0.5
5.0 min.
9.0 + 0.75/- 0.5
3.0 max.
16.0 ± 0.5
32.0
1.0 max.
11.0
4.0 ± 0.2
0.9 max.
1.5 max.
18.0 + 1.0/- 0.5
5.0 min.
9.0 + 0.75/- 0.5
3.0 max.
16.0 ± 0.5
40.0
1.0 max.
11.0
4.0 ± 0.2
0.9 max.
1.5 max.
Notes
(1) Cumulative pitch error: ± ≤ 1 mm/20 pitches
(2) Obliquity maximum 3°
Document Number: 28500
Revision: 07-Jan-10
For technical questions, contact: [email protected]
www.vishay.com
69
F Series
Vishay BCcomponents
Ceramic Disc Capacitors Class 2,
Low Loss (0.2 %), 500 VDC, 1 kVDC,
2 kVDC and 3 kVDC
REEL AND TAPE DATA in millimeters
51 max.
355.6 ± 2.0
28 ± 1.5
8.0
45 max.
Reel with capacitors on tape
W
L
H
Ammopack with capacitors on tape
DIMENSIONS OF AMMOPACK
DISC SIZE
(DMAX.)
PARAMETER
UNIT
6.5 mm to 11.0 mm
12.0 mm to 13.5 mm
Taping pitch
12.7
15.0
mm
L
335
360
mm
W
290
330
mm
H
50
55
mm
www.vishay.com
70
For technical questions, contact: [email protected]
Document Number: 28500
Revision: 07-Jan-10
F Series
Ceramic Disc Capacitors Class 2,
Low Loss (0.2 %), 500 VDC, 1 kVDC,
2 kVDC and 3 kVDC
ΔC (%)
C
Dissipation factor (x 10-4)
60
0
Vishay BCcomponents
140
120
100
80
60
40
20
- 60
- 40
0
-20
0
1 kHz
10 kHz
20
40
60
100
80
100 kHz
1 MHz
120 140
T (°C)
0
Typical capacitance change as a function of temperature
and frequency
20
40
1 kHz
10 kHz
60
80
100 kHz
1 MHz
100
120
140
Tamb (°C)
Typical dissipation factor as a function of temperature
and frequency
ΔC (%)
C
0
-2
-4
-6
-8
- 10
1
10
102
103
104
105
t (h)
Aging rate as a function of time
Document Number: 28500
Revision: 07-Jan-10
For technical questions, contact: [email protected]
www.vishay.com
71
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000