Data Sheet

PDTC123T series
NPN resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
Rev. 01 — 10 March 2006
Product data sheet
1. Product profile
1.1 General description
NPN Resistor-Equipped Transistors (RET) family in Surface Mounted Device (SMD)
plastic packages.
Table 1.
Product overview
Type number
Package
PNP complement
Philips
JEITA
JEDEC
PDTC123TE
SOT416
SC-75
-
PDTA123TE
PDTC123TK
SOT346
SC-59A
TO-236
PDTA123TK
PDTC123TM
SOT883
SC-101
-
PDTA123TM
PDTC123TS[1]
SOT54
SC-43A
TO-92
PDTA123TS
PDTC123TT
SOT23
-
TO-236AB
PDTA123TT
PDTC123TU
SOT323
SC-70
-
PDTA123TU
[1]
Also available in SOT54A and SOT54 variant packages (see Section 2).
1.2 Features
n Built-in bias resistors
n Simplifies circuit design
n 100 mA output current capability
n Reduces component count
n Reduces pick and place costs
1.3 Applications
n Digital applications
n Control of IC inputs
n Cost-saving alternative for BC847 series
in digital applications
n Switching loads
1.4 Quick reference data
Table 2.
Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VCEO
collector-emitter voltage
open base
-
-
50
V
IO
output current
-
-
100
mA
R1
bias resistor 1 (input)
1.54
2.2
2.86
kΩ
PDTC123T series
Philips Semiconductors
NPN resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
2. Pinning information
Table 3.
Pinning
Pin
Description
Simplified outline
Symbol
SOT54
1
input (base)
2
output (collector)
3
GND (emitter)
2
1
2
3
R1
1
001aab347
3
006aaa218
SOT54A
1
input (base)
2
output (collector)
3
GND (emitter)
2
1
2
R1
1
3
001aab348
3
006aaa218
SOT54 variant
1
input (base)
2
output (collector)
3
GND (emitter)
2
1
2
3
R1
1
001aab447
3
006aaa218
SOT23; SOT323; SOT346; SOT416
1
input (base)
2
GND (emitter)
3
output (collector)
3
3
R1
1
1
2
2
006aaa144
sym012
SOT883
1
input (base)
2
GND (emitter)
1
3
output (collector)
2
3
3
R1
Transparent
top view
1
2
sym012
PDTC123T_SER_1
Product data sheet
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Rev. 01 — 10 March 2006
2 of 10
PDTC123T series
Philips Semiconductors
NPN resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
3. Ordering information
Table 4.
Ordering information
Type number
PDTC123TE
Package
Name
Description
Version
SC-75
plastic surface mounted package; 3 leads
SOT416
PDTC123TK
SC-59A
plastic surface mounted package; 3 leads
SOT346
PDTC123TM
SC-101
leadless ultra small plastic package; 3 solder lands;
body 1.0 × 0.6 × 0.5 mm
SOT883
PDTC123TS[1]
SC-43A
plastic single-ended leaded (through hole) package;
3 leads
SOT54
PDTC123TT
-
plastic surface mounted package; 3 leads
SOT23
PDTC123TU
SC-70
plastic surface mounted package; 3 leads
SOT323
[1]
Also available in SOT54A and SOT54 variant packages (see Section 2 and Section 9).
4. Marking
Table 5.
Marking codes
Type number
Marking code[1]
PDTC123TE
2B
PDTC123TK
GB
PDTC123TM
FB
PDTC123TS
TC123T
PDTC123TT
ZM*
PDTC123TU
*1T
[1]
* = -: made in Hong Kong
* = p: made in Hong Kong
* = t: made in Malaysia
* = W: made in China
PDTC123T_SER_1
Product data sheet
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Rev. 01 — 10 March 2006
3 of 10
PDTC123T series
Philips Semiconductors
NPN resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
5. Limiting values
Table 6.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
VCBO
collector-base voltage
open emitter
-
50
V
VCEO
collector-emitter voltage
open base
-
50
V
VEBO
emitter-base voltage
open collector
-
5
V
IO
output current
-
100
mA
ICM
peak collector current
single pulse;
tp ≤ 1 ms
-
100
mA
Ptot
total power dissipation
Tamb ≤ 25 °C
SOT416
[1]
-
150
mW
SOT346
[1]
-
250
mW
SOT883
[2][3]
-
250
mW
SOT54
[1]
-
500
mW
SOT23
[1]
-
250
mW
SOT323
[1]
-
200
mW
Tstg
storage temperature
−65
+150
°C
Tj
junction temperature
-
150
°C
Tamb
ambient temperature
−65
+150
°C
[1]
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2]
Reflow soldering is the only recommended soldering method.
[3]
Device mounted on an FR4 PCB with 60 µm copper strip line, standard footprint.
6. Thermal characteristics
Table 7.
Thermal characteristics
Symbol
Parameter
Conditions
Rth(j-a)
thermal resistance from
junction to ambient
in free air
Typ
Max
Unit
SOT416
[1]
-
-
833
K/W
SOT346
[1]
-
-
500
K/W
SOT883
[2][3]
-
-
500
K/W
SOT54
[1]
-
-
250
K/W
SOT23
[1]
-
-
500
K/W
SOT323
[1]
-
-
625
K/W
[1]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2]
Reflow soldering is the only recommended soldering method.
[3]
Device mounted on an FR4 PCB with 60 µm copper strip line, standard footprint.
PDTC123T_SER_1
Product data sheet
Min
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Rev. 01 — 10 March 2006
4 of 10
PDTC123T series
Philips Semiconductors
NPN resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
7. Characteristics
Table 8.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
ICBO
collector-base cut-off
current
VCB = 50 V; IE = 0 A
-
-
100
nA
ICEO
collector-emitter cut-off
current
VCE = 30 V; IB = 0 A
-
-
1
µA
VCE = 30 V; IB = 0 A;
Tj = 150 °C
-
-
50
µA
nA
IEBO
emitter-base cut-off
current
VEB = 5 V; IC = 0 A
-
-
100
hFE
DC current gain
VCE = 5 V; IC = 20 mA
30
-
-
VCEsat
collector-emitter
saturation voltage
IC = 10 mA; IB = 0.5 mA
-
-
150
mV
R1
bias resistor 1 (input)
1.54
2.2
2.86
kΩ
Cc
collector capacitance
-
-
2.5
pF
006aaa696
500
VCB = 10 V; IE = ie = 0 A;
f = 1 MHz
006aaa697
1
hFE
(1)
400
VCEsat
(V)
(2)
300
10−1
(1)
(2)
(3)
(3)
200
100
0
10−1
1
102
10
10−2
10−1
IC (mA)
102
10
IC (mA)
VCE = 5 V
IC/IB = 20
(1) Tamb = 100 °C
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
(3) Tamb = −40 °C
Fig 1. DC current gain as a function of collector
current; typical values
Fig 2. Collector-emitter saturation voltage as a
function of collector current; typical values
PDTC123T_SER_1
Product data sheet
1
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Rev. 01 — 10 March 2006
5 of 10
PDTC123T series
Philips Semiconductors
NPN resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
8. Package outline
3
3
0.45
0.15
0.6
0.2
3.0 1.7
2.5 1.3
1.75 0.9
1.45 0.7
1
2
1
0.30
0.15
2
0.25
0.10
Dimensions in mm
04-11-04
Fig 3. Package outline SOT416 (SC-75)
0.62
0.55
0.55
0.47
0.50
0.35
1.9
1
0.26
0.10
Dimensions in mm
04-11-11
Fig 4. Package outline SOT346 (SC-59A/TO-236)
0.50
0.46
0.45
0.38
4.2
3.6
3
0.30
0.22
2
0.48
0.40
1.02
0.95
0.65
0.30
0.22
1.3
1.0
3.1
2.7
0.95
0.60
1.8
1.4
1
2
4.8
4.4
1
0.20
0.12
2.54
3
5.2
5.0
0.35
Dimensions in mm
03-04-03
Fig 5. Package outline SOT883 (SC-101)
14.5
12.7
Dimensions in mm
04-11-16
Fig 6. Package outline SOT54 (SC-43A/TO-92)
0.45
0.38
0.45
0.38
4.2
3.6
1.27
4.2
3.6
1.27
0.48
0.40
3 max
1
2.5
max
0.48
0.40
1
2
4.8
4.4
5.08
2.54
2
4.8
4.4
2.54
3
1.27
3
5.2
5.0
5.2
5.0
14.5
12.7
Dimensions in mm
Fig 7. Package outline SOT54A
04-06-28
Dimensions in mm
05-01-10
Fig 8. Package outline SOT54 variant
PDTC123T_SER_1
Product data sheet
14.5
12.7
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Rev. 01 — 10 March 2006
6 of 10
PDTC123T series
Philips Semiconductors
NPN resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
3.0
2.8
1.1
0.9
2.2
1.8
1.1
0.8
0.45
0.15
3
3
0.45
0.15
2.5 1.4
2.1 1.2
2.2 1.35
2.0 1.15
1
1
2
0.48
0.38
1.9
Dimensions in mm
0.25
0.10
1.3
04-11-04
Fig 9. Package outline SOT23 (TO-236AB)
2
0.4
0.3
0.15
0.09
Dimensions in mm
04-11-04
Fig 10. Package outline SOT323 (SC-70)
9. Packing information
Table 9.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number
Package
Description
3000
5000
10000
PDTC123TE
SOT416
4 mm pitch, 8 mm tape and reel
-115
-
-135
PDTC123TK
SOT346
4 mm pitch, 8 mm tape and reel
-115
-
-135
PDTC123TM
SOT883
2 mm pitch, 8 mm tape and reel
-
-
-315
PDTC123TS
SOT54
bulk, straight leads
-
-412
-
SOT54A
tape and reel, wide pitch
-
-
-116
tape ammopack, wide pitch
-
-
-126
SOT54 variant
bulk, delta pinning
-
-112
-
PDTC123TT
SOT23
4 mm pitch, 8 mm tape and reel
-215
-
-235
PDTC123TU
SOT323
4 mm pitch, 8 mm tape and reel
-115
-
-135
[1]
For further information and the availability of packing methods, see Section 12.
PDTC123T_SER_1
Product data sheet
Packing quantity
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Rev. 01 — 10 March 2006
7 of 10
PDTC123T series
Philips Semiconductors
NPN resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
10. Revision history
Table 10.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
PDTC123T_SER_1
20060310
Product data sheet
-
-
PDTC123T_SER_1
Product data sheet
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Rev. 01 — 10 March 2006
8 of 10
PDTC123T series
Philips Semiconductors
NPN resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
11. Legal information
11.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.semiconductors.philips.com.
11.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Philips Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Philips Semiconductors
sales office. In case of any inconsistency or conflict with the short data sheet,
the full data sheet shall prevail.
11.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, Philips Semiconductors does not give any representations
or warranties, expressed or implied, as to the accuracy or completeness of
such information and shall have no liability for the consequences of use of
such information.
Right to make changes — Philips Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — Philips Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a Philips Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. Philips Semiconductors accepts no liability for inclusion and/or use
of Philips Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is for the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Philips Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — Philips Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.semiconductors.philips.com/profile/terms, including those
pertaining to warranty, intellectual property rights infringement and limitation
of liability, unless explicitly otherwise agreed to in writing by Philips
Semiconductors. In case of any inconsistency or conflict between information
in this document and such terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
11.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
12. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: [email protected]
PDTC123T_SER_1
Product data sheet
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Rev. 01 — 10 March 2006
9 of 10
PDTC123T series
Philips Semiconductors
NPN resistor-equipped transistors; R1 = 2.2 kΩ, R2 = open
13. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
10
11
11.1
11.2
11.3
11.4
12
13
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description. . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 3
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Thermal characteristics. . . . . . . . . . . . . . . . . . . 4
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6
Packing information. . . . . . . . . . . . . . . . . . . . . . 7
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 8
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Contact information. . . . . . . . . . . . . . . . . . . . . . 9
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Koninklijke Philips Electronics N.V. 2006.
All rights reserved.
For more information, please visit: http://www.semiconductors.philips.com.
For sales office addresses, email to: [email protected]
Date of release: 10 March 2006
Document identifier: PDTC123T_SER_1
Similar pages