199D Datasheet

199D
www.vishay.com
Vishay Sprague
Solid-Electrolyte TANTALEX® Capacitors,
Resin-Coated, Radial-Lead
FEATURES
• Terminations: Tin/lead (SnPb), 100 % tin (Sn)
• Economy and high performance are combined
in these radial-lead, solid-electrolyte TANTALEX®
capacitors
• Rugged, reliable capacitors featuring low
leakage current and low dissipation factor
• Six miniature case sizes and five lead styles. All case sizes
are available in standard tape and reel packaging per
EIA-468
• Standard ratings include replacements for Type 196D
capacitors
• Lead (Pb)-free capacitors have “L” in body marking
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
APPLICATIONS
Suitable for a broad range of consumer, commercial and
industrial equipment
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(to + 125 °C with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C, ± 20 %,
± 10 % standard. ± 5 % available as special
Dissipation Factor: At 120 Hz, + 25 °C. Dissipation factor,
shall not exceed the values listed in the Standard Ratings
tables.
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings tables.
At + 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings tables.
At + 125 °C: Leakage shall not exceed 15 times the values
listed in the Standard Ratings tables.
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85 °C for 1000 h with a circuit resistance not
greater than 3 .
Following the life test:
1. DCL shall not exceed 125 % of the initial requirements
2. Dissipation Factor shall meet the initial requirement
3. Change in capacitance shall not exceed ± 10 %
LEAD STYLE CONFIGURATIONS AND DIMENSIONS** (LL = Lead Length)
“LONG/SHORT” LL
1, 3 and Y
EVEN LL
2, 4 and 5
D
D
+
+
3±1
H
L
+
+
L
P
6.35 max.
D
+
+
H1
1.1 ± 0.05
L
H
H
H1
L
L
P
P
“HAIRPIN” X, Z
D
D
+
+
H
“SNAP- IN”
9
“OUTSIDE HOCKEYSTICK”
6 and 7
P
P
(1) - WIRE DIAMETER (NOMINAL) 0.020" [0.51 mm]
AVAILABLE LEAD STYLES AND PACKAGING TYPES PER CASE SIZE
LEAD STYLE/CASE
1
2
Bulk
V1
Bulk
V1
Reel
B1
Ammo
A1
A
B
C
D
E
F
Revision: 29-Nov-12
3
4
5
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Bulk/Reel
Ammo
6
Bulk
V1
Reel
B1
Ammo
A1
7
9
X
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Reel
B1
Ammo
A1
Bulk
V1
Reel
B1
Ammo
A1
Y
Z
Bulk
V1
Bulk
V1
Reel
B1
Ammo
A1
Document Number: 40020
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
DIMENSIONS in inches [millimeters]
LEAD STYLE
1, 2, 3, 4
CASE
D
max.
A
0.173
[4.40]
B
0.197
[5.00]
C
0.217
[5.50]
D
0.236
[6.00]
E
0.339
[8.60]
F
0.378
[9.60]
P
± 0.024
[0.60]
H
max.
1, 2, 3
2, 4
L
min.
L
± 0.118
[3.0]
5, Y
P
± 0.03
[0.76]
6
L
± 0.118
[3.0]
P
± 0.024
[0.60]
H1
max.
0.378
[9.61]
0.280
[7.11]
0.100
[2.54]
0.300
[7.62]
0.125
[3.18]
0.360
[9.14]
0.400
[10.16]
0.200
[5.08]
L
0.591
[15.0]
0.398
[10.12]
0.748
[19.0]
0.748
[19.0]
0.458
[11.64]
0.200
[5.08]
0.492
[12.50]
-
0.650
[16.50]
-
0.240 ± 0.030
[6.1 ± 0.76]
0.498
[12.66]
-
0.591
[15.00]
-
0.748
[19.00]
1 ± 0.122
[25.4 ± 3.1]
DIMENSIONS in inches [millimeters]
LEAD
STYLE
7, 9
CASE
D
max.
A
0.173
[4.40]
B
0.197
[5.00]
C
0.217
[5.50]
D
0.236
[6.00]
7
P
± 0.024
[0.60]
9
L
± 0.03
[0.76]
H1
max.
P
± 0.024
[0.60]
0.378
[9.61]
0.25
[6.35]
H1
max.
X, Z
L
± 0.03
[0.76]
0.398
[10.11]
0.398
[10.12]
0.458
[11.64]
0.240
[6.10]
0.498
[12.66]
0.200
[5.08]
0.418
[10.62]
0.478
[12.14]
0.240
[6.10]
0.518
[13.16]
D
max.
H
max.
H1
max.
0.173
[4.40]
0.280
[7.11]
0.340
[8.64]
0.197
[5.00]
0.300
[7.62]
0.360
[9.14]
0.217
[5.50]
0.360
[9.14]
0.420
[10.67]
0.236
[6.00]
0.400
[10.16]
0.460
[11.68]
X
Z
L
± 0.125
P
± 0.024
P
± 0.024
0.750
[19.05]
0.100
[2.54]
0.125
[3.175]
Note
• Lead space measured within 0.05" [1.27 mm] of the body of the capacitor or from the bottom of the crimp.
ORDERING INFORMATION
199D
475
X9
003
A
1 (1)
V1
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE
CODE
LEAD
STYLE
PACKAGING
RoHS
COMPLIANT
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros to
follow.
X0 = ± 20 %
X9 = ± 10 %
** X5 = ± 5 %
** Special Order
This is expressed in V.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V).
See
Ratings
and
Case
Codes
table.
V1 = Bulk
B1 = Tape and reel
A1 = Ammo
E3 = 100 %
tin termination
(RoHS compliant)
Blank = Tin/lead
termination
Note
(1) See lead styles table.
Revision: 29-Nov-12
Document Number: 40020
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
199D OBSOLETE VS. CURRENT ORDERING CROSS REFERENCE
OBSOLETE
NEW
DESCRIPTION
A1
1V1
0.100 SP, UNEVEN STRAIGHT LL, BULK CASES A - D
A1
3V1
0.200 SP, UNEVEN STRAIGHT LL, BULK, CASES E, F
A1
2V1
0.100 SP, EVEN STRAIGHT LL, BULK, CASES A - D
A6
2B1
0.100 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES A - D
A6
2A1
0.100 SP, EVEN STRAIGHT LL, AMMO, CASES A - D
A1
4V1
0.200 SP, EVEN STRAIGHT LL, BULK, CASES E, F
A6
4B1
0.200 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES E, F
A6
4A1
0.200 SP, EVEN STRAIGHT LL, AMMO, CASES E, F
A2
5V1
0.125 SP, EVEN STRAIGHT LL, BULK, CASES A - D
A7
5B1
0.125 SP, EVEN STRAIGHT LL, REEL POSITIVE LEADER, CASES A - D
A7
5A1
0.125 SP, EVEN STRAIGHT LL, AMMO, CASES A - D
A2
YV1
0.125 SP, UNEVEN STRAIGHT LL, BULK, CASES A - D
B1
XV1
0.100 SP, HAIRPIN LL, BULK CASES A - D
B6
XB1
0.100 SP, HAIRPIN LL, REEL POSITIVE LEADER, CASES A - D
B6
XA1
0.100 SP, HAIRPIN LL, AMMO, CASES A - D
B2
ZV1
0.125 SP, HAIRPIN LL, BULK, CASES A - D
B7
ZB1
0.125 SP, HAIRPIN LL, REEL POSITIVE LEADER, CASES A - D
B7
ZA1
0.125 SP, HAIRPIN LL, AMMO, CASES A - D
E2
6V1
0.200 SP, HOCKEY STICK LL, BULK, CASES A - F
E7
6B1
0.200 SP, HOCKEY STICK LL, REEL POSITIVE LEADER, CASES A - F
E7
6A1
0.200 SP, HOCKEY STICK LL, AMMO, CASES A - F
E3
7V1
0.250 SP, HOCKEY STICK LL, BULK, CASES A - D
E8
7B1
0.250 SP, HOCKEY STICK LL, REEL POSITIVE LEADER, CASES A - D
E8
7A1
0.250 SP, HOCKEY STICK LL, AMMO, CASES A - D
E4
OBSOLETE
G2
9V1
0.200 SP, SNAP-IN LL, BULK, CASES A - D
G7
9B1
0.200 SP, SNAP-IN LL, REEL POSITIVE LEADER, CASES A - D
G7
9A1
0.200 SP, SNAP-IN LL, AMMO, CASES A - D
Revision: 29-Nov-12
Document Number: 40020
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
A
A
A
A
B
B
C
C
D
D
E
E
F
F
4.7
6.8
10
15
22
33
47
68
100
150
220
330
A
A
B
B
C
C
D
D
D
E
E
F
3.3
4.7
6.8
10
15
22
33
39
47
68
100
150
220
A
A
B
B
C
C
D
D
D
D
E
E
F
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
A
A
B
B
C
C
D
D
E
E
F
F
PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
3 VDC AT + 85 °C, SURGE = 3.6 V; 2 VDC AT + 125 °C, SURGE = 2.4 V
199D475(1)003A(2)(3)
0.5
199D685(1)003A(2)(3)
0.5
199D106(1)003A(2)(3)
0.5
199D156(1)003A(2)(3)
0.5
199D226(1)003B(2)(3)
0.6
199D336(1)003B(2)(3)
1.0
199D476(1)003C(2)(3)
1.4
199D686(1)003C(2)(3)
2.0
199D107(1)003D(2)(3)
3.0
199D157(1)003D(2)(3)
4.0
199D227(1)003E(2)(3)
5.0
199D337(1)003E(2)(3)
6.0
199D477(1)003F(2)(3)
8.0
199D687(1)003F(2)(3)
10.0
6.3 VDC AT + 85 °C, SURGE = 8 V; 4 VDC AT + 125 °C, SURGE = 5 V
199D475(1)6R3A(2)(3)
0.5
199D685(1)6R3A(2)(3)
0.5
199D106(1)6R3B(2)(3)
0.6
199D156(1)6R3B(2)(3)
0.9
199D226(1)6R3C(2)(3)
1.3
199D336(1)6R3C(2)(3)
2.0
199D476(1)6R3D(2)(3)
2.9
199D686(1)6R3D(2)(3)
4.0
199D107(1)6R3D(2)(3)
5.0
199D157(1)6R3E(2)(3)
6.0
199D227(1)6R3E(2)(3)
7.0
199D337(1)6R3F(2)(3)
8.0
10 VDC AT + 85 °C, SURGE = 13 V; 7 VDC AT + 125 °C, SURGE = 9 V
199D335(1)010A(2)(3)
0.5
199D475(1)010A(2)(3)
0.5
199D685(1)010B(2)(3)
0.6
199D106(1)010B(2)(3)
1.0
199D156(1)010C(2)(3)
1.5
199D226(1)010C(2)(3)
2.0
199D336(1)010D(2)(3)
3.0
199D339(1)010D(2)(3)
3.9
199D476(1)010D(2)(3)
4.0
199D686(1)010D(2)(3)
5.0
199D107(1)010E(2)(3)
6.0
199D157(1)010E(2)(3)
7.0
199D227(1)010F(2)(3)
8.0
16 VDC AT + 85 °C, SURGE = 20 V; 10 VDC AT + 125 °C, SURGE = 12 V
199D225(1)016A(2)(3)
0.5
199D335(1)016A(2)(3)
0.5
199D475(1)016B(2)(3)
0.7
199D685(1)016B(2)(3)
1.0
199D106(1)016C(2)(3)
1.5
199D156(1)016C(2)(3)
2.4
199D226(1)016D(2)(3)
3.5
199D336(1)016D(2)(3)
4.0
199D476(1)016E(2)(3)
5.0
199D686(1)016E(2)(3)
6.0
199D107(1)016F(2)(3)
7.0
199D157(1)016F(2)(3)
8.0
MAX. DF
AT + 25 °C
120 Hz (%)
6
6
8
8
8
8
8
8
10
10
10
10
10
10
6
6
8
8
8
8
8
8
10
10
10
10
6
6
6
8
8
8
8
8
8
8
10
10
10
6
6
6
6
8
8
8
8
8
8
10
10
Note
• Part number definitions:
(1) For capacitance tolerance: X0 = ± 20 %, X9 = ± 10 % or X5 = 5 %
(2) To specify Lead Style/Spacing/Packaging insert the last three characters in the part number. Use the appropriate code shown in the
Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table.
(3) E3 = RoHS compliant 100 % tin leads. Blank or no suffix = Standard tin/lead termination.
Revision: 29-Nov-12
Document Number: 40020
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DCL
AT + 25 °C
(μA)
20 VDC AT + 85 °C, SURGE = 26 V; 13 VDC AT + 125 °C, SURGE = 16 V
199D335(1)020B(2)(3)
0.8
199D475(1)020B(2)(3)
1.0
199D685(1)020C(2)(3)
1.5
199D106(1)020C(2)(3)
2.0
199D156(1)020D(2)(3)
2.5
199D226(1)020D(2)(3)
3.0
199D336(1)020E(2)(3)
4.0
199D476(1)020E(2)(3)
5.0
199D686(1)020F(2)(3)
6.0
199D107(1)020F(2)(3)
7.0
25 VDC AT + 85 °C, SURGE = 33 V; 17 VDC AT + 125 °C, SURGE = 21 V
199D105(1)025A(2)(3)
0.5
199D155(1)025A(2)(3)
0.5
199D225(1)025A(2)(3)
0.5
199D335(1)025B(2)(3)
0.8
199D475(1)025B(2)(3)
1.0
199D685(1)025C(2)(3)
1.5
199D106(1)025C(2)(3)
2.5
199D156(1)025D(2)(3)
3.0
199D226(1)025D(2)(3)
4.0
199D336(1)025E(2)(3)
5.0
199D476(1)025E(2)(3)
6.0
199D686(1)025F(2)(3)
7.0
35 VDC AT + 85 °C, SURGE = 46 V; 23 VDC AT + 125 °C, SURGE = 28 V
199D104(1)035A(2)(3)
0.5
199D154(1)035A(2)(3)
0.5
199D224(1)035A(2)(3)
0.5
199D334(1)035A(2)(3)
0.5
199D474(1)035A(2)(3)
0.5
199D684(1)035A(2)(3)
0.5
199D105(1)035A(2)(3)
0.5
199D155(1)035A(2)(3)
0.5
199D185(1)035B(2)(3)
0.7
199D225(1)035B(2)(3)
0.7
199D335(1)035B(2)(3)
1.0
199D475(1)035C(2)(3)
1.5
199D685(1)035D(2)(3)
2.3
199D106(1)035D(2)(3)
3.5
199D156(1)035E(2)(3)
4.0
199D226(1)035E(2)(3)
5.0
199D336(1)035F(2)(3)
6.0
199D476(1)035F(2)(3)
7.0
50 VDC AT + 85 °C, SURGE = 65 V; 33 VDC AT + 125 °C, SURGE = 40 V
199D104(1)050A(2)(3)
0.5
199D154(1)050A(2)(3)
0.5
199D224(1)050A(2)(3)
0.5
199D334(1)050A(2)(3)
0.5
199D474(1)050A(2)(3)
0.5
199D684(1)050A(2)(3)
0.5
199D105(1)050B(2)(3)
0.5
199D155(1)050C(2)(3)
0.7
199D225(1)050C(2)(3)
1.1
199D335(1)050D(2)(3)
1.5
199D475(1)050D(2)(3)
2.0
199D685(1)050F(2)(3)
3.0
199D106(1)050F(2)(3)
4.0
199D156(1)050F(2)(3)
5.0
199D226(1)050F(2)(3)
6.0
CAPACITANCE
(μF)
CASE CODE
3.3
4.7
6.8
10
15
22
33
47
68
100
B
B
C
C
D
D
E
E
F
F
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
A
A
A
B
B
C
C
D
D
E
E
F
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
1.8
2.2
3.3
4.7
6.8
10
15
22
33
47
A
A
A
A
A
A
A
A
B
B
B
C
D
D
E
E
F
F
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
A
A
A
A
A
A
B
C
C
D
D
F
F
F
F
PART NUMBER
MAX. DF
AT + 25 °C
120 Hz (%)
6
6
6
8
8
8
8
8
8
10
4
6
6
6
6
6
8
8
8
8
8
8
4
4
4
4
4
4
4
6
6
6
6
6
6
8
8
8
8
8
4
4
4
4
4
4
4
6
6
6
6
6
8
8
8
Note
• Part number definitions:
(1) For capacitance tolerance: X0 = ± 20 %, X9 = ± 10 % or X5 = 5 %
(2) To specify Lead Style/Spacing/Packaging insert the last three characters in the part number. Use the appropriate code shown in the
Current Ordering Cross Reference table and explained in the Ordering Information and Lead Styles table.
(3) E3 = RoHS compliant 100 % tin leads. Blank or no suffix = Standard tin/lead termination.
Revision: 29-Nov-12
Document Number: 40020
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
199D
www.vishay.com
Vishay Sprague
STANDARD REEL PACKAGING SPECIFICATIONS PER EIA-468 in inches [millimeters]
LEAD CONFIGURATION 6.7
LEAD CONFIGURATION 2, 4, 5
LEAD CONFIGURATION X, Z
1.270 [32.26]
MAX.
0.118 [3.0]
MAX.
0.0354 + 0.030 - 0.020
[8.99 + 0.762 - 0.508]
0.630 ± 0.020
[16.0 ± 0.508]
0.728 ± 0.020
[18.49 ± 0.508]
ADHESIVE TAPE
LEAD DIAMETER
0.500 ± 0.012
[12.70 ± 0.305]
CARRIER TAPE
SEE LEAD STYLE/SPACING
TABLE FOR LEAD SPACING
CASE CODE
OBSOLETE
LEAD STYLE
LEAD SPACING
LL MIN.
(BULK)
A, B, C, D
A1, A6
1V1 (Bulk),
2B1 (T and R)
0.100 + 0.024/- 0.016
[2.54 + 0.60/- 0.40]
0.187 [4.7]
A, B, C, D
B1, B6
XV1 (Bulk),
XB1 (T and R)
0.100 + 0.024/- 0.016
[2.54 + 0.60/- 0.40]
0.187 [4.7]
A, B, C,
D, E, F
E2, E7
6V1 (Bulk),
6B1 (T and R)
0.200 + 0.024/- 0.016
[5.08 + 0.06/- 0.40]
0.187 [4.7]
Note
• Lead space measured within 0.05" [1.27 mm] of the body of the capacitor, or from the bottom of the crimp. Lead Style “A” may be supplied
with 0.59" [15 mm] anode lead and 0.47" [12 mm] cathode lead.
Tape and Reel Packaging: Type 199D radial-leaded tantalum capacitors, all lead styles exept 1, 3 and Y are available taped
and reeled per EIA-468.
CASE CODE
A
Quantity per box bulk
Quantity per box ammopack
Quantity per reel
Revision: 29-Nov-12
B
C
1000
2500
D
500
2000
1500
1000
E
F
100
1000
500
500
Document Number: 40020
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000