CY8CKIT-007_PSoC 3 Precision Analog Voltmeter Demo Kit_Quick Start_Guide.pdf

CY8CKIT-007 PSoC® 3 PRECISION ANALOG VOLTMETER DEMO KIT
QUICK START GUIDE
1
2
1. Power the Kit through USB Connector
from 2-AA battery pack.
Connect the test leads.
CAUTION The input range is limited to
-30V DC to +30V DC DO NOT use
AC voltage.
2. Switch SW1 to the USB position (right).
3
4
Press the source button to toggle
between voltage inputs (Thermocouple
and test leads).
Use TP1 and TP2 test points to measure kit
power source.
5
6
Touch thermocouple and monitor voltage
displayed on LCD.
Refer to the Kit Guide for project files.
CY8CKIT-007 PSoC 3 PRECISION ANALOG VOLTMETER DEMO KIT
QUICK START GUIDE
Power Source
Selector
Program/Debug
Interface
External Voltage
Input Test Lead
Connectors
USB
Voltage Input
Source Selector
Thermocouple Voltage
Reference
For the latest information about this kit visit
www.cypress.com/go/CY8CKIT-007
© 2009 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks
referenced herein are the properties of their respective owners.
DOC#: 001-55169 REV **
Similar pages