CY8CKIT-007 PSoC® 3 PRECISION ANALOG VOLTMETER DEMO KIT QUICK START GUIDE 1 2 1. Power the Kit through USB Connector from 2-AA battery pack. Connect the test leads. CAUTION The input range is limited to -30V DC to +30V DC DO NOT use AC voltage. 2. Switch SW1 to the USB position (right). 3 4 Press the source button to toggle between voltage inputs (Thermocouple and test leads). Use TP1 and TP2 test points to measure kit power source. 5 6 Touch thermocouple and monitor voltage displayed on LCD. Refer to the Kit Guide for project files. CY8CKIT-007 PSoC 3 PRECISION ANALOG VOLTMETER DEMO KIT QUICK START GUIDE Power Source Selector Program/Debug Interface External Voltage Input Test Lead Connectors USB Voltage Input Source Selector Thermocouple Voltage Reference For the latest information about this kit visit www.cypress.com/go/CY8CKIT-007 © 2009 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. DOC#: 001-55169 REV **